About
Advanced Care
More About How-Tos
Seasonal Tips
Pests & Diseases
More Info
New Plant Care
Related Plants
How to Care for Red Ginger
Red ginger (Alpinia purpurata) is a flowering perennial plant native to Malaysia. Red ginger is often cultivated as an ornamental houseplant. This plant is also called the "ostrich plume" and the "pink cone ginger." red ginger is the national flower of Samoa.
Symbolism
Love, Money, Success
Water
Every week
Sunlight
Partial sun
Advanced Care Guide
Transplanting
Potting Suggestions
The prime time to transplant red ginger is during the S4, which allows ample time for growth before the cooler weather. Its new location should have well-drained soil and partial-to-full sunlight. Remember, giving red ginger ample water post-transplant can pave the way for successful establishment.
Needs excellent drainage in pots.
More About How-Tos
Explore 5 of plant how-tos on Water, Lighting, Temperature, Transplant, Overwinter, etc.
Water
Every week
Lighting
Partial sun
Red ginger thrives with a fair amount of sun exposure but is versatile in adapting to less or more illuminated conditions. Originating from environments with diverse light conditions, its growth remains healthy even in substantial shadows or stronger illumination. However, excessive sun can scorch the leaves, while too little can hinder the plant's growth.
Temperature
5 43 ℃
The native growth environment of red ginger suggests that it requires a warm and humid climate. It prefers a temperature range between 68 ℉ (20 ℃) and 100.4 ℉ (38 ℃), which suits its tropical nature. During winter, it is recommended to protect the plant from cold winds and frost, and maintain a temperature of at least 60.8 ℉ (16 ℃) to prevent damage.
Transplant
3-4 feet
The prime time to transplant red ginger is during the S4, which allows ample time for growth before the cooler weather. Its new location should have well-drained soil and partial-to-full sunlight. Remember, giving red ginger ample water post-transplant can pave the way for successful establishment.
Overwinter
20 ℃
Red ginger originates from tropical South Pacific regions, naturally thriving in high humidity and warmth, largely unadapted to wintry conditions. Gardening efforts should aim to replicate its native neon warmth, ensuring indoor placement with well-drained soil, high moisture, and no exposure to freezing temperatures. Its exotic foliage and vivacious flowers persist with adequate winter care.
Seasonal Care Tips
Spring
Summer
Fall
Winter
This plant and other types of winter hibernating bulbs start their growing season in the early spring.
1
It is time to divide bulbs in the garden and replant them.
2
Check container plants to see if the roots are growing above the soil or out of the drainage holes. If so, repot the plant and divide the bulbs.
3
Water the plant when the top layer of soil begins drying out.
4
Fertilizer with balanced, all-purpose plant food.
5
Ensure container plants are receiving several hours of sunlight during the day to encourage growth and blooming.
Even though the plant is often forced to bloom in the spring, the plant’s normal flowering time is in the early summer.
1
Keep the soil consistently moist, watering when the top layer is beginning to dry out.
2
Mulching around the plant will help keep the root system cool, and an application of all-purpose plant food provides necessary nutrients.
3
Move a container plant into a partially shady area to protect it from the hot, afternoon sun.
Your plant will enter dormancy during the cooler fall.
1
Prune away the spent flower heads, and then allow the plant to dry up before cutting it back to the bulb.
2
Greatly cut back watering during this season, allowing the soil to dry out more to avoid overwatering or harming the dormant plant.
The plant will continue its dormancy throughout the winter.
1
Avoid giving it much water, which can wake up this plant too early.
2
As this plant is vulnerable to the cold, either protect the roots and bulb through covering the beds with mulch, or moving the bulb to a warmer indoor pot or garden bed to overwinter.
Common Pests & Diseases
Common issues for Red ginger based on 10 million real cases
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.
Solutions: Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers. For severe cases: Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects. Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans. Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps. For less severe cases: Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water. Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.
Yellow spot
Leaf spot can show up as yellow or white spots on the leaves.
Solutions: Diseases Fungicides can prevent the transmission of spores, but they may not treat the established infection. The first step is removing and disposing of all infected plant parts. Then apply recommended chemicals. For bacterial infections, apply a spray containing copper or streptomycin. For fungal infections, consult the local cooperative extension for recommendations on which fungicides will work best. Nutrient deficiency Apply a liquid fertilizer via foliar application to fix the deficiency quickly. Follow label directions regarding dosing instructions and application notes, such as not using before the rain or when temperatures are out of the recommended range. Incorrect watering Determine the water requirements for your specific plant, and follow accordingly. Some plants like consistently moist soil, and others like the soil to dry out slightly before being watered. Pests Thoroughly apply an insecticidal soap, an organic product like neem oil, or an appropriate chemical insecticide to the plant.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.
Overview
Caterpillars can cause problems for home gardeners. If not managed, these insects can defoliate a plant in just a matter of days. However, home gardeners face a challenge because these caterpillars eventually turn into beautiful butterflies and moths, which are important for pollination and the general ecosystem.
There are thousands of different species of caterpillars and many will only target certain plants. If caterpillars are posing a problem, they can be removed by hand, or gardeners can use insect-proof netting to protect their valuable plants.
Symptom Analysis
Caterpillars are the larvae of butterflies and moths. During the warmer months, butterflies and moths that visit gardens will lay their eggs on the underside of leaves.
When the tiny eggs hatch, the young larvae emerge and start feeding on the leaves of the plant. Depending on how many larvae have hatched, they can easily defoliate the plant in a very short period of time. Caterpillars will shed their skin as they grow, around 4 or 5 times during this feeding cycle.
Symptoms of caterpillars eating plants appear as holes in the leaves. The edges of the leaves may be eaten away as well, and flowers can be affected as well.
Some are easy to see, but others need to be searched for. This is because their bodies are often camouflaged to look like part of the plant. Gardeners need to look carefully along the stems of the plant as well as under the leaves. Also, look for tiny white, yellow, or brown eggs that can be found in groups on the underside of leaves.
Once the caterpillar is fully grown, it transforms into a pupa or chrysalis. Then, after a period of time that varies according to the species, a butterfly or moth will emerge from the pupa and the cycle begins again.
Solutions
Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers.
For severe cases:
- Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects.
- Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans.
- Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps.
For less severe cases:
- Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water.
- Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.
Prevention
Prevention may require less effort than attempts to eradicate infestations that have already begun. Here are our top steps for prevention:
- Monitor plants. Check plants regularly for caterpillar eggs on leaves. If they do not belong to an endangered species, they should be squished.
- Use insect netting. Cover plants with insect netting to prevent butterflies and moths from laying eggs on plants.
- Apply diatomaceous earth. Apply DE to plants early in the season and reapply after rain.
- Encourage plant diversity. This will attract predatory insects including parasitic wasps.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Yellow spot
Leaf spot can show up as yellow or white spots on the leaves.
Overview
Yellow spot is a common condition that affects all types of plants -- flowering ornamentals, trees, shrubs, herbs, and vegetable plants -- worldwide. Yellow spots may appear because of dozens of potential causes and occur in various environmental and climatic conditions, but fortunately, most are easy to address. The most common causes of yellow spots include diseases, nutrient deficiency, watering problems, and pests.
In most cases, yellow spots can be treated without permanent damage to the plant. However, in some fungal disease cases, nothing can be done to treat the disease after infection, and the plant will ultimately perish from the disease.
Due to this, the most critical aspect of addressing yellow spots on plants is correctly determining the cause.
Symptom Analysis
Symptoms occur on varying parts of the plant, depending upon the cause. Smaller spots tend to be indicative of younger infections or newly developing problems.
- Small yellow spots appear on leaves
- Spots can occur on the lower or upper leaf surfaces, or both
- Raised, rounded, or sunken spots with fringed or smooth edges
- Spots may grow together, causing leaves to become totally discolored
- Stunted growth
- Premature leaf drop
Disease Cause
The vast majority of yellow spot diseases are caused by fungal pathogens. However, there are some situations in which bacteria, environmental conditions, or other issues may be blamed.
Diseases are typically host-specific, so they may only affect plants within the same family. That said, just about every single species of plant is vulnerable to at least one disease that causes yellow spot. The most common problems are leaf blight, leaf septoria, powdery mildew, and downy mildew, to name a few.
All plants need specific nutrients from the soil to survive. When these nutrients become depleted or unavailable for plant uptake due to particular conditions, deficiencies occur, and yellow spots are seen.
- Nitrogen is an integral component of chlorophyll.
- Iron is needed in the enzymes that make chlorophyll.
Yellow spots may also appear because of incorrect watering, mainly underwatering, or infestations of sap-sucking pests such as aphids.
- Too little water inhibits photosynthesis. Too much water pushes oxygen out of the soil and the roots cannot take in nutrients or even water from the soil.
- Insect problems can cause yellow spots directly by damaging leaf tissue when feeding, or they may introduce pathogens.
Solutions
Diseases
Fungicides can prevent the transmission of spores, but they may not treat the established infection. The first step is removing and disposing of all infected plant parts. Then apply recommended chemicals.
For bacterial infections, apply a spray containing copper or streptomycin.
For fungal infections, consult the local cooperative extension for recommendations on which fungicides will work best.
Nutrient deficiency
Apply a liquid fertilizer via foliar application to fix the deficiency quickly. Follow label directions regarding dosing instructions and application notes, such as not using before the rain or when temperatures are out of the recommended range.
Incorrect watering
Determine the water requirements for your specific plant, and follow accordingly. Some plants like consistently moist soil, and others like the soil to dry out slightly before being watered.
Pests
Thoroughly apply an insecticidal soap, an organic product like neem oil, or an appropriate chemical insecticide to the plant.
Prevention
Depending on the type of plant and which specific disease is causing yellow spot, problems may be avoided by taking the following preventative steps:
- Plant resistant varieties
- Avoid planting susceptible varieties close together - space susceptible plants further apart from one another so it’s more difficult for the fungal spores to find new plant hosts.
- Water wisely - water from below rather than splashing water on foliage. This can reduce the spread of both bacterial and fungal pathogens responsible for yellow spot.
- Prune - prune as a way of getting rid of affected leaves but also to control the spread of yellow spot to new plants. Pruning can also improve air circulation to limit disease spread.
- Rotate crops - many diseases, including downy mildew, can live in the soil over the winter and produce problems for many years. Rotate annual crops to new locations each year so that they aren’t growing anywhere in which plants in the same family were grown within the last three to four years.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
More About Red Ginger
Plant Type
Herb
Bloom Time
Mid spring, Late spring, Summer, Early fall, Mid fall
Flower Color
Red
White
Leaf Color
Green
Flower Size
3.5 to 8 cm
Plant Height
80 to 300 cm
Name story
Red ginger
The reason for ginger being associated with red-haired people is probably because of the negative connotations of the word in the UK. As the beautiful flowers grow on the red bracts, it is commonly called red ginger.
Usages
Garden Use
Red ginger is a common evergreen perennial typically grown as a houseplant or in tropical gardens. Its shockingly vibrant red bracts are the main attraction of this plant, along with its lovely foliage. Red ginger is a perfect option to add some tropical flair to an indoor space or bring some color into your home.
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Caring for a New Plant
The following pictures and instructions for tropical plant are aimed to help your plants adapt and thrive in a new environment.
1
Picking a Healthy Tropical Plant
Check Its Health
Whole Plant
Symmetrical crown, evenly distributed branches, full and compact shape, no excessive growth, close internodes, and uniform leaf size.
Branches
The branches are not withered, and the trunk is free of boreholes or damage.
Leaves
Check the inside of the plant, shaded and overlapping areas, back of leaves. Even colour, no yellowing, no brown spots, no crawling insects, no cobwebs, no deformities, no wilting.
Stems
No mold, browning or soft rot at the base of the plant.
Health Troubleshooting
Whole Plant ![trouble-image]()
![more]()
1 Asymmetrical crown or missing, uneven branching: prune the weak and slender branches of the larger portion of the asymmetrical crown, then trim the overgrown larger branches. ![trouble-image]()
![more]()
2 Internodes are longer in the upper part, leaves are sparse and smaller on top: increase light intensity or duration.
1 Asymmetrical crown or missing, uneven branching: prune the weak and slender branches of the larger portion of the asymmetrical crown, then trim the overgrown larger branches. 
2 Internodes are longer in the upper part, leaves are sparse and smaller on top: increase light intensity or duration. Branches ![trouble-image]()
![more]()
1 Dry branches: check if the branch is still alive by peeling back a small section of bark and trim away any dry branches. Watch out for signs of insect infestation inside the branch. ![trouble-image]()
![more]()
2 Bark with holes: inject insecticide into the holes and apply systemic insecticide to the roots. ![trouble-image]()
![more]()
3 Damaged bark: brush on a wound-healing agent, and avoid getting it wet.
1 Dry branches: check if the branch is still alive by peeling back a small section of bark and trim away any dry branches. Watch out for signs of insect infestation inside the branch. 
2 Bark with holes: inject insecticide into the holes and apply systemic insecticide to the roots. 
3 Damaged bark: brush on a wound-healing agent, and avoid getting it wet. Stems ![trouble-image]()
Mildew, browning, or soft rot at the base: place the plant in a ventilated, dry environment and water with fungicide.
Leaves ![trouble-image]()
![more]()
1 Uneven leaf color and yellowing: prune yellow leaves and check if there are signs of rot at the base of the plant. Spray with fungicide for severe cases. ![trouble-image]()
![more]()
2 Brown spots or small yellow spots: place the plant in a ventilated area and avoid watering the leaves. Spray with fungicide for severe cases. ![trouble-image]()
![more]()
3 Tiny crawling insects on the back of leaves or spider webs between leaves: increase light exposure and spray with insecticide for severe cases. ![trouble-image]()
![more]()
4 Deformations or missing parts on leaves: determine if it's physical damage or pest infestation. Linear or tearing damage is physical, while the rest are pests. Spray with insecticide. ![trouble-image]()
![more]()
5 Wilting leaves: provide partial shade and avoid excessive sun exposure. Remove 1/3 to 1/2 of the leaves for severe cases.
1 Uneven leaf color and yellowing: prune yellow leaves and check if there are signs of rot at the base of the plant. Spray with fungicide for severe cases. 
2 Brown spots or small yellow spots: place the plant in a ventilated area and avoid watering the leaves. Spray with fungicide for severe cases. 
3 Tiny crawling insects on the back of leaves or spider webs between leaves: increase light exposure and spray with insecticide for severe cases. 
4 Deformations or missing parts on leaves: determine if it's physical damage or pest infestation. Linear or tearing damage is physical, while the rest are pests. Spray with insecticide. 
5 Wilting leaves: provide partial shade and avoid excessive sun exposure. Remove 1/3 to 1/2 of the leaves for severe cases. Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Check Its Growing Conditions
Soil Check
Soil should smell fresh like after a rain and no musty odor.
Light Check
Check the light requirement of the plant and if it match with planting location.
Ventilation Check
Ensure good ventilation.
Temperature Check
Check if the current outdoor temperature is too low or too high.
Condition Troubleshooting
Soil
Potting mix soil, Peat moss mix soil
Soil smells musty or foul: check the root system for decay, place the plant in a ventilated, dry environment, and water with fungicide.
Suitable Light
Partial sun, Full shade
Insufficient light: Indoor plants can handle reduced light but not full shade. Periodically moving the plant to a sunnier spot can help compensate for nutrient depletion in dim conditions.
Transplant recovery: Shade, place in bright diffused light. Gradually increase light after 3 days without wilting. If transplanted/repotted or lost leaves, shade for a week. Increase light if yellowing and leaf drop occur.
Ideal Temperature
10℃ to 35℃
Temperature is too low or too high: Indoors usually meets plant needs. Don't place outside below 50℉ (10℃) or above 86℉ (30℃).
Ventilation
Well Ventilated
Non-ventilated environment: can lead to root rot, diseases, and flower drop. Place plants in a well-ventilated location, such as a window.
2
Adapting Your New Tropical Plant
Step 1
Repotting
Transplanting is possible but not necessary. Clean the roots by removing any rotten or blackened roots. Be careful when removing the plant from its pot to keep the root system intact and avoid spreading the soil. If the roots are too tangled, gently spread them out and trim as needed. For planting, mix a small amount of well-rotted organic fertilizer into the bottom of the soil. Use loose and airy floral soil for planting and press the soil down slightly after planting. Water the soil promptly and thoroughly after planting.
show more ![show-more]()
Step 2
Pruning
Not usually needed. Cut off yellow or diseased leaves and crowded leaves that appear wilted or falling.
show more ![show-more]()
Step 3
Watering
Increase watering in the first week to keep soil moist. Water when soil is slightly dry, for at least 2 weeks. Avoid over-watering. Do not water when there is water on your fingers after touching the soil.
show more ![show-more]()
Step 4
Fertilizing
Add a small amount of base fertilizer during transplanting or repotting. No other fertilizer needed for the first month.
show more ![show-more]()
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Red Ginger
Repotting
Clean roots, avoid soil spreading, use organic fertilizer, plant in loose soil, water thoroughly.
Pruning
Cut off yellow or diseased leaves and crowded leaves that appear wilted or falling.
Watering
Water new plants more often for 2 weeks. Avoid over/under watering by checking the soil.
Fertilizing
Add base fertilizer during transplanting. No other fertilizer is needed for the first month.
Sunlight
Regular sun exposure for indoor plants. Shade after transplanting/repotting, then gradually increase light if there is no wilting. Increase light if yellowing and leaf drop occur.
Save and print our adaptation tips card for quick and easy reference.
Download Red Ginger
Repotting
Clean roots, avoid soil spreading, use organic fertilizer, plant in loose soil, water thoroughly.
Pruning
Cut off yellow or diseased leaves and crowded leaves that appear wilted or falling.
Watering
Water new plants more often for 2 weeks. Avoid over/under watering by checking the soil.
Fertilizing
Add base fertilizer during transplanting. No other fertilizer is needed for the first month.
Sunlight
Regular sun exposure for indoor plants. Shade after transplanting/repotting, then gradually increase light if there is no wilting. Increase light if yellowing and leaf drop occur.
Plants with Same Care Needs
Poison ivy
In pop culture, poison ivy is a symbol of an obnoxious weed because, despite its unthreatening looks, it gives a highly unpleasant contact rash to the unfortunate person who touches it. Still, it is commonly eaten by many animals, and the seeds are a favorite with birds. The leaves turn bright red in fall. Its sister species, Western poison ivy (Toxicodendron rydbergii), is not considered to be invasive in the United States, but is noxious in Australia and New Zealand.
Bloom Time
Mid spring
Golden pothos
The golden pothos (Epipremnum aureum) is a popular houseplant that is commonly seen in Australia, Asia, and the West Indies. It goes by many nicknames, including "devil's ivy", because it is so hard to kill and can even grow in low light conditions. Golden pothos has poisonous sap, so it should be kept away from pets and children.
Common lilac
Common lilac is a shrub native to the Balkan Peninsula that blooms with a fragrant blossom. It grows on rocky terrain and has a suckering habit. The blossoms are used to flavor honey, sugars, food, and other delights and farmed for its fragrant flowers in the spring. 
Bloom Time
Mid spring
Red raspberry
Red raspberry is a perennial forest shrub with elongated, thorny stems. The stems grow rapidly during their first year and bloom in their second year. The plant produces small, aggregate fruit that has a distinct aroma and a sweet-and-sour taste. Rubus idaeus cultivars are hybrids between this red raspberry and the American species R. Strigosus.
Bloom Time
Mid spring
Black walnut
Black walnut is a large riparian zone tree native to North America. It is cultivated for nutritious walnuts and high-quality dark timber. Black walnut produces juglone, a compound that inhibits the growth of other plants in the black walnut tree’s proximity, so it may be undesirable near lawns and gardens. It is susceptible to a Thousand Cankers Disease.
Bloom Time
Mid spring
Common boxwood
Common boxwood is a perennial plant native to Europe, Africa, and Asia. The plant's specific epithet sempervirens stands for "always green." The plant produces non-showy, creamy yellow flowers that are fragrant. The bark and leaves of the plant were once used to manufacture perfumes and extracts.
Bloom Time
Mid spring
View More Plants
Botanist in your pocket
App
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
Botanist in your pocket
Scan QR code to download
About
Advanced Care
More About How-Tos
Seasonal Tips
Pests & Diseases
More Info
New Plant Care
How to Care for Red Ginger
Red ginger (Alpinia purpurata) is a flowering perennial plant native to Malaysia. Red ginger is often cultivated as an ornamental houseplant. This plant is also called the "ostrich plume" and the "pink cone ginger." red ginger is the national flower of Samoa.
Symbolism
Love, Money, Success
Every week
Water ![Water detail]()
Partial sun
Sunlight ![Sunlight detail]()
Advanced Care Guide
Transplanting
Potting Suggestions
The prime time to transplant red ginger is during the S4, which allows ample time for growth before the cooler weather. Its new location should have well-drained soil and partial-to-full sunlight. Remember, giving red ginger ample water post-transplant can pave the way for successful establishment.
Needs excellent drainage in pots.
More About How-Tos
Seasonal Care Tips
Spring
Summer
Fall
Winter
This plant and other types of winter hibernating bulbs start their growing season in the early spring.
1
It is time to divide bulbs in the garden and replant them.
2
Check container plants to see if the roots are growing above the soil or out of the drainage holes. If so, repot the plant and divide the bulbs.
3
Water the plant when the top layer of soil begins drying out.
4
Fertilizer with balanced, all-purpose plant food.
5
Ensure container plants are receiving several hours of sunlight during the day to encourage growth and blooming.
Even though the plant is often forced to bloom in the spring, the plant’s normal flowering time is in the early summer.
1
Keep the soil consistently moist, watering when the top layer is beginning to dry out.
2
Mulching around the plant will help keep the root system cool, and an application of all-purpose plant food provides necessary nutrients.
3
Move a container plant into a partially shady area to protect it from the hot, afternoon sun.
Your plant will enter dormancy during the cooler fall.
1
Prune away the spent flower heads, and then allow the plant to dry up before cutting it back to the bulb.
2
Greatly cut back watering during this season, allowing the soil to dry out more to avoid overwatering or harming the dormant plant.
The plant will continue its dormancy throughout the winter.
1
Avoid giving it much water, which can wake up this plant too early.
2
As this plant is vulnerable to the cold, either protect the roots and bulb through covering the beds with mulch, or moving the bulb to a warmer indoor pot or garden bed to overwinter.
Common Pests & Diseases
Common issues for Red ginger based on 10 million real cases
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More ![more]()
Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.
Solutions: Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers. For severe cases: Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects. Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans. Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps. For less severe cases: Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water. Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.
Learn More ![more]()
Yellow spot
Leaf spot can show up as yellow or white spots on the leaves.
Solutions: Diseases Fungicides can prevent the transmission of spores, but they may not treat the established infection. The first step is removing and disposing of all infected plant parts. Then apply recommended chemicals. For bacterial infections, apply a spray containing copper or streptomycin. For fungal infections, consult the local cooperative extension for recommendations on which fungicides will work best. Nutrient deficiency Apply a liquid fertilizer via foliar application to fix the deficiency quickly. Follow label directions regarding dosing instructions and application notes, such as not using before the rain or when temperatures are out of the recommended range. Incorrect watering Determine the water requirements for your specific plant, and follow accordingly. Some plants like consistently moist soil, and others like the soil to dry out slightly before being watered. Pests Thoroughly apply an insecticidal soap, an organic product like neem oil, or an appropriate chemical insecticide to the plant.
Learn More ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.
Overview
Caterpillars can cause problems for home gardeners. If not managed, these insects can defoliate a plant in just a matter of days. However, home gardeners face a challenge because these caterpillars eventually turn into beautiful butterflies and moths, which are important for pollination and the general ecosystem.
There are thousands of different species of caterpillars and many will only target certain plants. If caterpillars are posing a problem, they can be removed by hand, or gardeners can use insect-proof netting to protect their valuable plants.
Symptom Analysis
Caterpillars are the larvae of butterflies and moths. During the warmer months, butterflies and moths that visit gardens will lay their eggs on the underside of leaves.
When the tiny eggs hatch, the young larvae emerge and start feeding on the leaves of the plant. Depending on how many larvae have hatched, they can easily defoliate the plant in a very short period of time. Caterpillars will shed their skin as they grow, around 4 or 5 times during this feeding cycle.
Symptoms of caterpillars eating plants appear as holes in the leaves. The edges of the leaves may be eaten away as well, and flowers can be affected as well.
Some are easy to see, but others need to be searched for. This is because their bodies are often camouflaged to look like part of the plant. Gardeners need to look carefully along the stems of the plant as well as under the leaves. Also, look for tiny white, yellow, or brown eggs that can be found in groups on the underside of leaves.
Once the caterpillar is fully grown, it transforms into a pupa or chrysalis. Then, after a period of time that varies according to the species, a butterfly or moth will emerge from the pupa and the cycle begins again.
Solutions
Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers.
For severe cases:
- Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects.
- Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans.
- Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps.
For less severe cases:
- Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water.
- Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.
Prevention
Prevention may require less effort than attempts to eradicate infestations that have already begun. Here are our top steps for prevention:
- Monitor plants. Check plants regularly for caterpillar eggs on leaves. If they do not belong to an endangered species, they should be squished.
- Use insect netting. Cover plants with insect netting to prevent butterflies and moths from laying eggs on plants.
- Apply diatomaceous earth. Apply DE to plants early in the season and reapply after rain.
- Encourage plant diversity. This will attract predatory insects including parasitic wasps.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Yellow spot
Leaf spot can show up as yellow or white spots on the leaves.
Overview
Yellow spot is a common condition that affects all types of plants -- flowering ornamentals, trees, shrubs, herbs, and vegetable plants -- worldwide. Yellow spots may appear because of dozens of potential causes and occur in various environmental and climatic conditions, but fortunately, most are easy to address. The most common causes of yellow spots include diseases, nutrient deficiency, watering problems, and pests.
In most cases, yellow spots can be treated without permanent damage to the plant. However, in some fungal disease cases, nothing can be done to treat the disease after infection, and the plant will ultimately perish from the disease.
Due to this, the most critical aspect of addressing yellow spots on plants is correctly determining the cause.
Symptom Analysis
Symptoms occur on varying parts of the plant, depending upon the cause. Smaller spots tend to be indicative of younger infections or newly developing problems.
- Small yellow spots appear on leaves
- Spots can occur on the lower or upper leaf surfaces, or both
- Raised, rounded, or sunken spots with fringed or smooth edges
- Spots may grow together, causing leaves to become totally discolored
- Stunted growth
- Premature leaf drop
Disease Cause
The vast majority of yellow spot diseases are caused by fungal pathogens. However, there are some situations in which bacteria, environmental conditions, or other issues may be blamed.
Diseases are typically host-specific, so they may only affect plants within the same family. That said, just about every single species of plant is vulnerable to at least one disease that causes yellow spot. The most common problems are leaf blight, leaf septoria, powdery mildew, and downy mildew, to name a few.
All plants need specific nutrients from the soil to survive. When these nutrients become depleted or unavailable for plant uptake due to particular conditions, deficiencies occur, and yellow spots are seen.
- Nitrogen is an integral component of chlorophyll.
- Iron is needed in the enzymes that make chlorophyll.
Yellow spots may also appear because of incorrect watering, mainly underwatering, or infestations of sap-sucking pests such as aphids.
- Too little water inhibits photosynthesis. Too much water pushes oxygen out of the soil and the roots cannot take in nutrients or even water from the soil.
- Insect problems can cause yellow spots directly by damaging leaf tissue when feeding, or they may introduce pathogens.
Solutions
Diseases
Fungicides can prevent the transmission of spores, but they may not treat the established infection. The first step is removing and disposing of all infected plant parts. Then apply recommended chemicals.
For bacterial infections, apply a spray containing copper or streptomycin.
For fungal infections, consult the local cooperative extension for recommendations on which fungicides will work best.
Nutrient deficiency
Apply a liquid fertilizer via foliar application to fix the deficiency quickly. Follow label directions regarding dosing instructions and application notes, such as not using before the rain or when temperatures are out of the recommended range.
Incorrect watering
Determine the water requirements for your specific plant, and follow accordingly. Some plants like consistently moist soil, and others like the soil to dry out slightly before being watered.
Pests
Thoroughly apply an insecticidal soap, an organic product like neem oil, or an appropriate chemical insecticide to the plant.
Prevention
Depending on the type of plant and which specific disease is causing yellow spot, problems may be avoided by taking the following preventative steps:
- Plant resistant varieties
- Avoid planting susceptible varieties close together - space susceptible plants further apart from one another so it’s more difficult for the fungal spores to find new plant hosts.
- Water wisely - water from below rather than splashing water on foliage. This can reduce the spread of both bacterial and fungal pathogens responsible for yellow spot.
- Prune - prune as a way of getting rid of affected leaves but also to control the spread of yellow spot to new plants. Pruning can also improve air circulation to limit disease spread.
- Rotate crops - many diseases, including downy mildew, can live in the soil over the winter and produce problems for many years. Rotate annual crops to new locations each year so that they aren’t growing anywhere in which plants in the same family were grown within the last three to four years.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
More About Red Ginger
Plant Type
Herb
Bloom Time
Mid spring, Late spring, Summer, Early fall, Mid fall
Flower Color
Red
White
Leaf Color
Green
Flower Size
3.5 to 8 cm
Plant Height
80 to 300 cm
Name story
Red ginger
The reason for ginger being associated with red-haired people is probably because of the negative connotations of the word in the UK. As the beautiful flowers grow on the red bracts, it is commonly called red ginger.
Usages
Garden Use
Red ginger is a common evergreen perennial typically grown as a houseplant or in tropical gardens. Its shockingly vibrant red bracts are the main attraction of this plant, along with its lovely foliage. Red ginger is a perfect option to add some tropical flair to an indoor space or bring some color into your home.
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Caring for a New Plant
The following pictures and instructions for tropical plant are aimed to help your plants adapt and thrive in a new environment.
1
Picking a Healthy Tropical Plant
Check Its Health
Whole Plant
Symmetrical crown, evenly distributed branches, full and compact shape, no excessive growth, close internodes, and uniform leaf size.
Branches
The branches are not withered, and the trunk is free of boreholes or damage.
Leaves
Check the inside of the plant, shaded and overlapping areas, back of leaves. Even colour, no yellowing, no brown spots, no crawling insects, no cobwebs, no deformities, no wilting.
Stems
No mold, browning or soft rot at the base of the plant.
Health Troubleshooting
Whole Plant
Branches
Stems
Leaves
1 Asymmetrical crown or missing, uneven branching: prune the weak and slender branches of the larger portion of the asymmetrical crown, then trim the overgrown larger branches. 
2 Internodes are longer in the upper part, leaves are sparse and smaller on top: increase light intensity or duration. 
1 Dry branches: check if the branch is still alive by peeling back a small section of bark and trim away any dry branches. Watch out for signs of insect infestation inside the branch. 
2 Bark with holes: inject insecticide into the holes and apply systemic insecticide to the roots. 
3 Damaged bark: brush on a wound-healing agent, and avoid getting it wet. 
Mildew, browning, or soft rot at the base: place the plant in a ventilated, dry environment and water with fungicide.
1 Uneven leaf color and yellowing: prune yellow leaves and check if there are signs of rot at the base of the plant. Spray with fungicide for severe cases. 
2 Brown spots or small yellow spots: place the plant in a ventilated area and avoid watering the leaves. Spray with fungicide for severe cases. 
3 Tiny crawling insects on the back of leaves or spider webs between leaves: increase light exposure and spray with insecticide for severe cases. 
4 Deformations or missing parts on leaves: determine if it's physical damage or pest infestation. Linear or tearing damage is physical, while the rest are pests. Spray with insecticide. 
5 Wilting leaves: provide partial shade and avoid excessive sun exposure. Remove 1/3 to 1/2 of the leaves for severe cases. Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Check Its Growing Conditions
Soil Check
Soil should smell fresh like after a rain and no musty odor.
Light Check
Check the light requirement of the plant and if it match with planting location.
Ventilation Check
Ensure good ventilation.
Temperature Check
Check if the current outdoor temperature is too low or too high.
Condition Troubleshooting
Soil
Suitable Light
Ideal Temperature
Ventilation
Potting mix soil, Peat moss mix soil
Soil
Soil smells musty or foul: check the root system for decay, place the plant in a ventilated, dry environment, and water with fungicide.
Partial sun, Full shade
Suitable Light
Insufficient light: Indoor plants can handle reduced light but not full shade. Periodically moving the plant to a sunnier spot can help compensate for nutrient depletion in dim conditions.
Transplant recovery: Shade, place in bright diffused light. Gradually increase light after 3 days without wilting. If transplanted/repotted or lost leaves, shade for a week. Increase light if yellowing and leaf drop occur.
10℃ to 35℃
Ideal Temperature
Temperature is too low or too high: Indoors usually meets plant needs. Don't place outside below 50℉ (10℃) or above 86℉ (30℃).
Well Ventilated
Ventilation
Non-ventilated environment: can lead to root rot, diseases, and flower drop. Place plants in a well-ventilated location, such as a window.
2
Adapting Your New Tropical Plant
Step 1
Repotting
Transplanting is possible but not necessary. Clean the roots by removing any rotten or blackened roots. Be careful when removing the plant from its pot to keep the root system intact and avoid spreading the soil. If the roots are too tangled, gently spread them out and trim as needed. For planting, mix a small amount of well-rotted organic fertilizer into the bottom of the soil. Use loose and airy floral soil for planting and press the soil down slightly after planting. Water the soil promptly and thoroughly after planting.
Step 2
Pruning
Not usually needed. Cut off yellow or diseased leaves and crowded leaves that appear wilted or falling.
Step 3
Watering
Increase watering in the first week to keep soil moist. Water when soil is slightly dry, for at least 2 weeks. Avoid over-watering. Do not water when there is water on your fingers after touching the soil.
Step 4
Fertilizing
Add a small amount of base fertilizer during transplanting or repotting. No other fertilizer needed for the first month.
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Sign in/sign up
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Water
How Often Should I Water Red Ginger?
Every week
Watering Frequency
Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App
Just like people, each plant has its own preferences and needs. Devote time to understanding your plants so you can nurture them properly. Observe your plants attentively, learning from their growth patterns, and becoming more in tune with their needs as you grow together. Keep a watchful eye on new plants and seedlings, as they are sensitive to both overwatering and underwatering. Shower them with gentle love and attention, fostering their growth and strength. Let the rhythm of your local climate guide your watering habits, adapting your schedule to the changing weather and the needs of your plants. Important Symptoms
Overwatering
Red ginger is more susceptible to developing disease symptoms when overwatered because it prefers a soil environment with moderate humidity. Symptoms of overwatering include yellowing leaves, brown or black spots, root rot...
View more
(Symptom details and solutions)
Brown or black spots
Excessive watering can damage the plant's root system, making it vulnerable to fungal infections. The plant may develop dark brown to black spots that spread upwards from the lower leaves which are usually the first to be affected.
Root rot
Excess water in the soil can lead to the growth of harmful fungi and bacteria, causing the roots to rot and eventually kill the plant.
Soft or mushy stems
Excess water can cause stems to become soft and mushy, as the cells become waterlogged and lose their structural integrity.
Increased susceptibility diseases
Overwatering plants may become more susceptible and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Adjust watering frequency based on seasons and soil dryness. Wait for soil to dry before watering.2. Increase soil aeration by loosening surface and gently stirring with a wooden stick or chopstick.3. Optimize environment with good ventilation and warmth to enhance water evaporation and prevent overwatering.
Underwatering
Red ginger is more susceptible to plant health issues when lacking watering, as it can only tolerate short periods of drought. Symptoms of dehydration include wilting, leaf curling, yellowing leaves...
View more
(Symptom details and solutions)
Wilting
Due to the dry soil and insufficient water absorption by the roots, the leaves of the plant will appear limp, droopy, and lose vitality.
Leaf curling
Leaves may curl inward or downward as they attempt to conserve water and minimize water loss through transpiration.
Increased susceptibility to pests and diseases
Underwatered plants may become more susceptible to pests and diseases as their overall health declines, weakening their natural defenses.
Dying plant
If underwatering continues for an extended period, the plant may ultimately die as a result of severe water stress and an inability to carry out essential functions.
Solutions
1. Thoroughly saturate soil with slow ring watering to ensure uniform and sufficient moisture for plants. 2. Increase air humidity with water trays or misting to slow leaf water evaporation. 3. Watering according to the recommended frequency.Adjust watering frequency based on seasons and soil dryness.
Discover care info about seasonal tips, plant diseases, and more?
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Partial sun
Ideal
About 3-6 hours sunlight
Full sun, Full shade
Tolerance
Above 6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
Red ginger thrives with a fair amount of sun exposure but is versatile in adapting to less or more illuminated conditions. Originating from environments with diverse light conditions, its growth remains healthy even in substantial shadows or stronger illumination. However, excessive sun can scorch the leaves, while too little can hinder the plant's growth.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Red ginger is a versatile plant that thrives in partial sunlight but can tolerate full sunlight in cooler weather. Although symptoms of light deficiency may not be easily noticeable, inadequate light conditions can affect their growth indoors.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your red ginger may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
Red ginger enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To optimize plant growth, shift them to increasingly sunnier spots each week until they receive 3-6 hours of direct sunlight daily, enabling gradual adaptation to changing light conditions.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Red ginger thrives with partial sun exposure but is more prone to sunburn. The intense sunlight during summer can cause leaf sunburn, making it important to provide adequate shade and protection.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover care info about seasonal tips, plant diseases, and more?
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
The native growth environment of red ginger suggests that it requires a warm and humid climate. It prefers a temperature range between 68 ℉ (20 ℃) and 100.4 ℉ (38 ℃), which suits its tropical nature. During winter, it is recommended to protect the plant from cold winds and frost, and maintain a temperature of at least 60.8 ℉ (16 ℃) to prevent damage.
Regional wintering strategies
Red ginger is extremely heat-loving, and any cold temperatures can cause harm to it. In the autumn, it is recommended to bring outdoor-grown Red ginger indoors and place it near a bright window, but it should be kept at a certain distance from heaters. Maintaining temperatures above {Suitable_growth_temperature_min} during winter is beneficial for plant growth. Any temperatures approaching {Tolerable_growing_temperature_min} are detrimental to the plant.
Important Symptoms
Low Temperature
Red ginger prefers warm temperatures and is not tolerant of low temperatures. It thrives best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, the leaves may lighten in color. After frost damage, the color gradually turns brown or black, and symptoms such as wilting and drooping may occur.
Solutions
Trim off the frost-damaged parts. Immediately move indoors to a warm environment for cold protection. Choose a spot near a south-facing window to place the plant, ensuring ample sunlight. Additionally, avoid placing the plant near heaters or air conditioning vents to prevent excessive dryness in the air.
High Temperature
During summer, Red ginger should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the color of the leaves becomes lighter, and the plant becomes more susceptible to sunburn.
Solutions
Trim away the sunburned and dried-up parts. Move the plant to a location that provides shade from the midday and afternoon sun. Water the plant in the morning and evening to keep the soil moist.
Discover care info about seasonal tips, plant diseases, and more?
Transplant
How to Successfully Transplant Red Ginger?
The prime time to transplant red ginger is during the S4, which allows ample time for growth before the cooler weather. Its new location should have well-drained soil and partial-to-full sunlight. Remember, giving red ginger ample water post-transplant can pave the way for successful establishment.
What Preparations are Needed Before Transplanting Red Ginger?
What is the Ideal Time for Transplanting Red Ginger?
The ideal season for transplanting red ginger is spring (S4), as it boosts its thriving chance. Transferring red ginger during this time ensures strong growth thanks to the mild weather. So, ensure to prepare for red ginger's transplantation when the spring sunshine starts peeking.
How Much Space Should You Leave Between Red Ginger Plants?
When transplanting red ginger, consider the spacing! Ideally, each plant should be spaced about 3-4 feet (approximately 1-1.2 meters) apart. This gives your red ginger plenty of room to grow without competing for nutrients or light.
What is the Best Soil Mix for Red Ginger Transplanting?
Prep your soil before you plant red ginger. This plant thrives in rich, well-drained soil. A good base fertilizer such as compost or a slow-release granular product can do wonders. It's best to mix it in a couple of weeks before transplanting.
Where Should You Relocate Your Red Ginger?
Next, pick the right spot! Red ginger appreciates sunlight. A bright, sunny location with direct morning sunlight and afternoon shade is best for this gorgeous perennial. They can also tolerate partial shade locations.
What Equipments Should You Prepare Before Transplantation Red Ginger?
Gardening Gloves
To protect your hands while working with the soil and plant.
Spade or Shovel
To dig a hole for transplanting the red ginger and to help lift it from its original location.
Garden Cart or Wheelbarrow
To transfer the red ginger plant from its original location to the new one.
Pruning Shears
For trimming away any dead or damaged parts of the red ginger plant before transplanting.
Watering Can or Hose
To keep the plant hydrated during and after transplantation.
Screwdriver
To loosen the plant from a pot or seedling tray.
How Do You Remove Red Ginger from the Soil?
Step1 Preparing Plant
Trim any dead or damaged areas off the red ginger plant using pruning shears. After that, thoroughly water the plant.
Step2 Digging Hole
Dig a hole that's wide and deep enough to accommodate the red ginger plant's root ball comfortably. Keep the soil that you've dug out; it will be useful later.
Step3 Planting
Place the plants in the hole, ensuring that the top of the root ball is level with the ground. Refill around the root ball with the soil you'd dug out, firming it gently around the base of the plant.
Step4 Watering
Water the plant generously right after the transplant process to help settle the soil and eliminate any air pockets.
Step-by-Step Guide for Transplanting Red Ginger
Step1 Preparing Plant
Trim any dead or damaged areas off the red ginger plant using pruning shears. After that, thoroughly water the plant.
Step2 Digging Hole
Dig a hole that's wide and deep enough to accommodate the red ginger plant's root ball comfortably. Keep the soil that you've dug out; it will be useful later.
Step3 Planting
Place the plants in the hole, ensuring that the top of the root ball is level with the ground. Refill around the root ball with the soil you'd dug out, firming it gently around the base of the plant.
Step4 Watering
Water the plant generously right after the transplant process to help settle the soil and eliminate any air pockets.
How Do You Care For Red Ginger After Transplanting?
Watering
Keep the soil around the red ginger consistently moist, but not soggy, for the first few weeks after transplanting to help establish strong roots.
Pruning
Periodically check and remove any dead or damaged parts of the plant to promote new growth and maintain its health.
Protection
Keep an eye out for pests or diseases that can harm the red ginger and treat them as needed.
Rejuvenation
If the plant seems distressed after transplantation, cut back the leaves and stems by a third to half of its height to help it channel its energy towards developing a strong root system.
Troubleshooting Common Issues with Red Ginger Transplantation.
When is the perfect time to transplant red ginger?
Preferably, transplanting red ginger should be done in 'S4', ensuring the plant can establish roots before intense weather changes.
What is the ideal spacing when planting red ginger?
Give each red ginger a good breathing space. A distance of approximately 3-4 feet (90-120 cm) apart is ideal.
What if I see yellow leaves after transplanting red ginger?
Yellow leaves can signify stress or lack of nutrients. Ensure that you water red ginger properly and provide required fertilizers.
How deep should I plant red ginger?
Ensure that the root ball of red ginger is just at the soil level. Planting too deep may harm the plant.
What should I do if red ginger wilts after being transplanted?
Wilting is usually a sign of transplant shock. Water red ginger regularly and keep in a suitable environment to recover.
What's the best soil for transplanting red ginger?
Red ginger prefers well-drained, fertile soil. A good mix of garden soil, compost, and perlite creates an excellent backdrop for growth.
Why is my transplanted red ginger not flowering?
Improper fertilization or less than needed sunlight exposure may lead to red ginger not flowering. Make sure it's getting enough of both.
How much should I water red ginger after transplanting?
Red ginger likes moist soil, but overwatering can damage it. Water it well after transplanting then maintain a consistent watering schedule.
How much sunlight does red ginger need after transplanting?
Red ginger thrives in partial to full sunlight. After transplanting, ensure it gets at least 4-6 hours of sun exposure daily.
When should I expect to see growth in my transplanted red ginger?
Given proper care and ideal conditions, red ginger should show signs of growth within 2-4 weeks of transplatation.
Discover care info about seasonal tips, plant diseases, and more?
