camera identify
Try for Free
tab list
PictureThis
English
arrow
English
繁體中文
日本語
Español
Français
Deutsch
Pусский
Português
Italiano
한국어
Nederlands
العربية
Svenska
Polskie
ภาษาไทย
Bahasa Melayu
Bahasa Indonesia
PictureThis
Search
Search Plants
Try for Free
Global
English
English
繁體中文
日本語
Español
Français
Deutsch
Pусский
Português
Italiano
한국어
Nederlands
العربية
Svenska
Polskie
ภาษาไทย
Bahasa Melayu
Bahasa Indonesia
This page looks better in the app
care_about care_about
About
care_basic_guide care_basic_guide
Basic Care
care_advanced_guide care_advanced_guide
Advanced Care
care_scenes care_scenes
More About How-Tos
care_seasonal_tips care_seasonal_tips
Seasonal Tips
care_pet_and_diseases care_pet_and_diseases
Pests & Diseases
care_toxicity care_toxicity
Toxicity
care_more_info care_more_info
More Info
care_faq care_faq
FAQ

How to Care for Mother Of Millions

Mother of millions leaves are virgate and densely streaked, with dark green to gray stripes. The top of each leaf usually has 6-7 small lateral buds, which fall to the ground and grow into brand-new plants at the slightest touch. Wild mother of millions is everywhere, and can often be found under eaves, by corners of walls, and on roofs.
symbolism

Symbolism

Endurance and lasting affection, wealth and prosperity
Water
Water
Every 2-3 weeks
Sunlight
Sunlight
Full sun
Toxic to Pets
Mother of millions
Mother of millions
Mother of millions
care_basic_guide

Basic Care Guide

Cultivation:WaterDetail

How to Water Mother of millions?

Mother of millions doesn't need much water. For many novices, the most difficult problem is how to water. In fact, it is not recommended to water at a fixed time, but more attention should be paid to the state of succulent plant and specific weather conditions. You can learn how to water the succulent plant correctly from the following five aspects.
A. Weather: in hot weather or low temperature, succulent plant will enter dormancy. In such period, watering should be reduced a little, usually once 1-2 weeks. Since the growth of succulent plant is basically stagnant when it is in dormancy, its absorption of water and nutrients is quite slow. At the same time, it is necessary to keep the environment dry and ventilated. Frequent watering can cause succulent plant to die due to black rot.
B. Time: in summer, it is better to water in the evening to avoid the sun at noon, because high temperature will make the newly watered soil stuffy which makes the root system prone to black rot; it does not matter in other seasons.
C. State of succulent plant: succulent plant will show some obvious symptoms when it is lack of water. For example, healthy leaves of Astridia velutina or Lithops sp. will wrinkle and even curl up when they are short of water. For some succulent varieties, such as Monilaria obconica and Phyllobolus resurgens, their leaves will droop and slouch when they are short of water. That's the signal of water shortage sent by the succulent plant.
D. Soil: you can also determine whether to water by observing the moisture change of the soil. For potted succulent plants, you can weigh the pot in your hand to simply judge the amount of water left in the soil, because the weight of the soil is quite different when there's sufficient water or insufficient water. In addition, if there's a gap between the outer edge of the soil and the inner edge of the pot, or the soil surface cracks, that is also a sign of water shortage.
E. Pot: for pots with good air permeability such as red pot, which is not easy to keep water, so the watering frequency can be higher; for white porcelain pot or pot without holes, the watering frequency can be lower.
Cultivation:WaterDetail
waterreminders

Never miss a care task again!

Plant care made easier than ever with our tailor-made smart care reminder.
What is the best way to water my Mother of millions?
The proper way to water Mother of millions requires some timing. For example, you should wait until the spring, when the new leaves are beginning to grow, before considering adding water to this plant’s pot. Once that season arrives, you can add water when the soil inside the pot has become entirely dry. When watering, you can use either tap water or distilled water. It's best not to water this plant from overhead. Instead, you should water at the base of the plant by applying the water slowly and evenly across the entire surface of the soil. This method will allow you to moisten all parts of the soil consistently without dampening the above-ground portions of the plant, which your Mother of millions will appreciate. Typically, you can continue adding water until you notice a light stream of excess water draining from the pot’s hole.
Read More more
What should I do if I water my Mother of millions too much or too little?
An overwatered Mother of millions is a far more common occurrence than one that is underwatered. Overwatering is also incredibly detrimental to your plant's health as it can cause one Mother of millions to die quite quickly. One way to avoid overwatering is to allow the soil to dry entirely before adding water, as mentioned previously. Especially when it turns into dormancy, lots of people will just water it in the wrong way. As such, we’ll focus on how to remedy the problem of overwatering. When your Mother of millions shows signs of overwatering, it is often best to remove it from its current pot. After removal, you should access the roots of this plant and remove any that show signs of rot or some other moisture-related disease. While some roots should be removed, others will return to full health after a simple cleaning. After this stage, you should repot your Mother of millions in soil that has excellent drainage capabilities to lessen the odds of future overwatering.
While unlikely, underwatering can take place too. If that occurs for you, all you need to do is supply your plant with water on a slightly more frequent basis, ensuring that you don't overcorrect the issue and end up overwatering your plant.
Read More more
How often should I water my Mother of millions?
As a succulent plant, the water needs of Mother of millions are quite low compared to most other plants because this plant hails from a region that is constantly hot and dry.
To give this plant species proper care, you should allow its soil to dry out completely between waterings.
Typically, it will take anywhere from two weeks to a month for the soil to dry entirely, at which time you can add water. Watering frequency tends to be very seasonally related. During the spring to summer period, it will be in a growing state and it may take 2-3 weeks for the soil to dry completely, you can follow this watering frequency. During the summer time, the soil may dry out faster. However, when the temperature falls below 60 degrees or rises above 85 degrees Fahrenheit, most of them will be dormant or semi-dormant, which means that the plant does not need more watering at the moment. Instead, you should reduce or even stop watering to keep the soil dry until the temperature is appropriate again for Mother of millions to grow, and then restart watering.
Read More more
How much water does my Mother of millions need?
Overall, Mother of millions does not need a high volume of water. This is mainly due to the fact that this plant must go for a while without receiving water. However, when the time to water this plant does arrive, you should be ready to give it a lot of water. While there is no set amount of water to give this plant, you should not stop watering until the soil is completely moist. The best way to ensure this is the case, provided you grow this plant in a pot, is to water it until you see water trickling through the drainage holes at the bottom of the pot. You can also insert a pencil or some similar object deep into the soil to test if you have watered enough. If you remove the pencil and it is moist, then you have provided enough water.
Read More more
How can I tell if i'm watering my Mother of millions enough?
Generally, overwatering is a far more significant issue than underwatering is. When overwatering occurs, you should notice right away as the leaves will begin to lose their form, become mushy, and change colors. This will be a stark contrast to a healthy set of living stone leaves, which should be relatively sturdy and hold their shape. Underwatering is incredibly rare for Mother of millions, as this species can often survive with no water at all. However, if underwatering does occur, you will usually notice leaf discoloration and dryness.
Read More more
How should I water my Mother of millions through the seasons?
As mentioned, Mother of millions needs the most water during the times of year that it is actively growing. By contrast, in winter, when the plant is entirely dormant, you should reduce these already low watering needs. In fact, during winter, you should not water this plant at all. Once spring arrives, wait until your Mother of millionss begin to develop new leaves. Once that occurs, you can return to your regular watering schedule. During the hottest parts of summer, your plant may enter another dormant growth phase, which means its water needs will be lower than normal. As summer ends and fall arrives, you can begin reducing your watering in anticipation of winter. By the time winter arrives, you should cease watering altogether.
Read More more
How should I water my Mother of millions at different growth stages?
By and large, the water needs of Mother of millions will remain consistent throughout each of its growth stages. Anyway, Mother of millions prefers dry soil conditions more than moist ones, so watering less is safer for it than watering a lot. However, there are some phases in which your Mother of millions may need slightly more water than usual. Despite being known for their foliage, Mother of millionss can also provide flowers, but these flowers do not arrive until the plant is at least a few years old. Once flower development is possible, your Mother of millions may need a minimal uptick in its watering schedule to accommodate flower development. Otherwise, you should not expect to change your watering frequency significantly based on this plant’s growth stages.
Read More more
What's the difference between watering Mother of millions indoors and outdoors?
Growing Mother of millionss outdoors is not an option for most gardeners in hardiness zones colder than zone 9, as this plant loves areas that have warm or hot weather year-round. Only in regions that do not have yearly temperatures that fall below 40 degrees Fahrenheit can this plant species survive. If you live in such an area, you should study the average rainfall in your area as well. If you live where it rains often, your Mother of millions will likely die from overwatering. But if you live in a warm climate in which it rains occasionally, you may not need to water your Mother of millionss at all.
Those who live in cooler areas of the world should have no issue growing this plant indoors. If that is the approach you take, you can wait until all of the soil in your plant's container has dried out while also following the rest of the general watering advice we've laid out in the sections above.
Read More more
left right
Cultivation:FertilizerDetail

How to Fertilize Mother of millions?

Most succulent plants are used to growing in the wild where the environment is poor, so they do not need fertilization in their growth cycle. You can add a little slow-release fertilizer in early summer, and it's fine if you do not apply fertilizer. Please remember, don't fertilize it during its dormancy period, because too much nutrients that it can't absorb may cause damages to its growth.

Fertilizer

Often found growing in rock gardens and used in xeriscaping, Mother of millions adds plenty of interest and texture to the area. It is a slow-growing plant, and this affects its care. Mother of millions does not require a lot of nutrients to thrive. Knowing when and how to feed your specimen will help ensure you get years of enjoyment from your plant. Fertilizing Mother of millions adds nutrients to the growing medium. Even though it does store water and nutrients, applying plant food during the growing season helps support healthy growth. Fertilizing can also encourage mature specimens to produce blooms in the growing season.
While all plants benefit from additional nutrients, Mother of millions only needs a light dose of fertilizer during the growing season. The frequency of fertilization should be 1-2 times a year. It is suggested to fertilize your Mother of millions in the spring and autumn, but not in winter&summer when it is dormant. Be careful with repotted plants, you will want to reduce the amount of fertilizer. It’s also a good idea to wait a couple of months after repotting before you start applying fertilizer. It’s best to use a liquid plant food formulated for succulents and cacti when you are fertilizing Mother of millions. Dilute the fertilizer with water to half-strength. You do not want the fertilizer building up in the soil. Apply the fertilizer to the base of the plant and water thoroughly, ensuring any excess moisture drains from the container or seeps into the ground.
It is easier to use liquid plant food when you are fertilizing Mother of millions, but granules are another option. Follow the directions on the packaging, making sure you dilute liquid fertilizers to half-strength. Whether you are using granules are liquid plant food, always apply it to the soil. Cover the granules with a thin layer of soil and water regardless of the type of plant food you are using.
Over-fertilizing Mother of millions is a common problem with new and experienced gardeners. The plant has low nutritional needs and it’s easy to apply a little too much fertilizer. Over-fertilizing Mother of millions can burn the plant’s sensitive roots resulting in its slow decay. Without its root system, the plant cannot absorb nutrients and moisture.
Like most plants, Mother of millions has a dormancy period and it is when you want to stop the applications of fertilizer. In the summer and winter, the plant ceases growing, and it is when you want to stop applying fertilizer. It’s also a good idea to cease fertilizing for the first couple of months after repotting in the spring.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
close
Cultivation:FertilizerDetail
Why do I need to fertilize my Mother of millions?
Fertilizing Mother of millions adds nutrients to the growing medium. Even though it does store water and nutrients, applying plant food during the growing season helps support healthy growth. Fertilizing can also encourage mature specimens to produce blooms in the growing season.
Read More more
When is the best time to fertilize my Mother of millions?
While all plants benefit from additional nutrients, Mother of millions only needs a light dose of fertilizer during the growing season. The frequency of fertilization should be 1-2 times a year. It is suggested to fertilize your Mother of millions in the spring and autumn, but not in winter&summer when it is dormant. Be careful with repotted plants, you will want to reduce the amount of fertilizer. It’s also a good idea to wait a couple of months after repotting before you start applying fertilizer.
Read More more
When should I avoid fertilizing my Mother of millions?
Like most plants, Mother of millions has a dormancy period and it is when you want to stop the applications of fertilizer. In the summer and winter, the plant ceases growing, and it is when you want to stop applying fertilizer. It’s also a good idea to cease fertilizing for the first couple of months after repotting in the spring.
Read More more
What type of fertilizer does my Mother of millions need?
It’s best to use a liquid plant food formulated for succulents and cacti when you are fertilizing Mother of millions. Dilute the fertilizer with water to half-strength. You do not want the fertilizer building up in the soil. Apply the fertilizer to the base of the plant and water thoroughly, ensuring any excess moisture drains from the container or seeps into the ground.
Read More more
How do I fertilize my Mother of millions?
It is easier to use liquid plant food when you are fertilizing Mother of millions, but granules are another option. Follow the directions on the packaging, making sure you dilute liquid fertilizers to half-strength. Whether you are using granules are liquid plant food, always apply it to the soil. Cover the granules with a thin layer of soil and water regardless of the type of plant food you are using.
Read More more
What happens if I fertilize my Mother of millions too much?
Over-fertilizing Mother of millions is a common problem with new and experienced gardeners. The plant has low nutritional needs and it’s easy to apply a little too much fertilizer. Over-fertilizing Mother of millions can burn the plant’s sensitive roots resulting in its slow decay. Without its root system, the plant cannot absorb nutrients and moisture.
Read More more
left right
Cultivation:SunlightDetail

What Are the Sunlight Requirements for Mother of millions?

Generally speaking, mother of millions needs sufficient scattered light which should be bright and transparent. If there is not sufficient sunlight for a long time, the plant will be spindling, the tissue will become brittle, and the original color will fade slowly, as a result, the plant will grow into a loose shape, the color will turn green and yellow, and the resistance will decline.
Strong sunlight in summer may burn its leaves and stems. When exposed to the sun, it tends to grow slowly or even stop growing, its leaves grow compactly and internodes shorten, which results in shorter plant. For some succulent plants, their old leaves wither in summer and new leaves tend to be short and compact, showing a bare rod shape as a whole. In summer, you can set up a sunshade for it or move the potted plant indoor.
Cultivation:SunlightDetail
lightmeter

Know the light your plants really get.

Find the best spots for them to optimize their health, simply using your phone.
How much sunlight does Mother of millions need to grow?
Mother of millions should get at least 6 hours of sun per day, and preferably more. An actual minimum number of hours can vary depending on the intensity of sunlight and other environmental factors, but it is unlikely that the Mother of millions will get too much sunlight. They do fine with up to 14 hours of sun per day.
Read More more
What type of sunlight does Mother of millions need?
Mother of millions needs a lot of bright sunlight. As full-sun plants, they can thrive when given direct light or bright indirect sun. Some types may be able to survive with partial sun, but more sunlight is generally better.
Read More more
Should I protect Mother of millions from sun exposure?
Mother of millions usually grows in some of the hottest, sunniest places in the world and is well adapted to that kind of environment, so it does not need to be protected from the sun. However, you should be careful about making a sudden move into a very sunny location if your Mother of millions is not used to it. Plants need time to adapt to different conditions, so start by moving this plant into the sun for a couple of hours at a time each day, then gradually lengthen the amount of sun exposure. Once adapted, most types of Mother of millions will be fine in full sun and don't need protection.
Read More more
What will happen if Mother of millions doesn't get enough sunlight?
Without enough sunlight, Mother of millions will fail to thrive and grow. Common symptoms of inadequate sunlight include pale coloring, wilting leaves, and leaf drop. Mother of millions may also exhibit etiolation (also called legginess). This condition occurs as the plant attempts to stretch toward the light source, leading to a sparse appearance and weak stems.
Read More more
What will happen if Mother of millions gets too much sunlight?
Mother of millions may develop shades of red, pink, or orange as a means of protection from excess sunlight, so many people like to cause mild sun stress to these plants during the summer. This is not harmful, and they will revert to their normal coloring when light levels decrease from autumn to spring.
If moved too quickly into direct sun, Mother of millions can suffer from sunburn. This looks like white or brown spots on the uppermost leaves that have been exposed to the most sun. A sunburned plant should be moved to a shadier location and watered if needed. Sun-damaged leaves can be removed, and should be replaced by new growth over time.
Read More more
Does Mother of millions need special care about sunlight during its different growth stages?
As with most plants, younger Mother of millions will be more sensitive to strong sunlight and heat than a mature specimen. They should also be protected from direct sun immediately after being transplanted, either by a shade or by keeping the container in a shadier location until the plant is established and putting out new growth.
Read More more
Are there any cautions or tips for sunlight and Mother of millions?
It is best to water Mother of millions in the morning, particularly during the summer months. If water sits on the leaves or in the crown of the plant, it can burn the plant when the water heats up. It’s also best not to water in the evening, since cooler overnight temperatures slow evaporation and fungi or bacteria can develop in the moist conditions.
Mother of millions grown in pots should be rotated occasionally to keep them growing symmetrically. Plants will normally grow toward the light source, so they can develop much more quickly on one side than the other if they are not rotated.
If Mother of millions is allowed to get dusty, it will not be able to access sunlight to create energy. The dust acts as a barrier, so the plant may show signs of inadequate light even if it’s in a sunny location. Keep the leaves and stems clean by wiping them periodically with a damp cloth to avoid this issue.
Read More more
left right
Cultivation:PruningDetail

How to Prune Mother of millions?

In order to keep beautiful shape, some large succulent plants may need pruning. For example, in California, for echeveria planted in the garden, some redundant branches and branches that are too dense need to be cut off in spring and autumn. This depends on what you think and what the succulent plant is used for. Tools for pruning mainly include knife, scissors, and some medicines (such as sulfur powder).
In order to propagate new plants, we can also cut some leaves in spring and autumn for cutting. Stout stems with 5-6 leaves are often selected: cut it off with a knife, then smear the wound with sulfur powder, and plant it after the wound is healed. At this time, it is recommended to use a watering can to slightly wet the soil used for cutting.
Cultivation:PruningDetail
close
care_advanced_guide

Advanced Care Guide

Cultivation:WaterAndHardinessDetail

What is the Ideal Temperature Range for Mother of millions?

The suitable growth temperature of mother of millions is above 15 ℃, and it can grow normally in spring, summer and autumn. It can tolerate high temperature, but it will enter the dormancy period when the temperature is higher than 33 ℃ (Sedum lineare is a special species that still grows well under high temperature in summer.). When the temperature is lower than 5 ℃ in winter, it is recommended to move mother of millions indoor to avoid irreversible frostbite or even death.
If you are in a cold region, it is not recommended to plant it directly in the garden, but as a potted plant. When it enters its dormancy, it needs less watering; during its growing season, a small amount of water is needed.
Cultivation:WaterAndHardinessDetail
What is the optimal temperature for Mother of millions?
To create the best possible environment for Mother of millions, you’ll want to grow your Mother of millions in temperatures between 60-75℉ (15-25℃). They can tolerate marginally higher and lower temperatures, but this range will help facilitate optimal growth.
Mother of millions that experience temperatures below 40℉(10℃) or above 95℉(35℃) will go into a state of dormancy, halting their growth. Staying above 95℉ (35℃) for anything other than a short period can damage these plants; enough time in high temperatures may kill them entirely.
Read More more
Does Mother of millions require different temperatures for different growing phases?
Mother of millions do require different temperatures to enter their different phases of life, primarily the dormant phase they reach during summer and their growing phase during the winter. Mother of millions need cooler temperatures to actively grow, but not too cold; anything below 40℉(10℃) will push them into a state of dormancy regardless of season.
High temperatures can also induce a dormant state, restricting growth and reducing the plant's watering needs. Too much watering during dormancy can drown the plant and cause root rot, so make sure to only water the soil when it feels dry.
Read More more
Three tips for keeping Mother of millions temperature under control
Tip #1: Don’t Over-Water When Temperatures Are High
It may seem counterintuitive, but Mother of millions actually need less water during summer. To see if your plants have enough moisture, check the soil by putting your pointer finger two inches (5 cm) below the surface and feeling to see if it's dry. If it's already wet and you continue to water it, you can cause the roots of your plant to rot.
Tip #2: Don’t Panic If Temperatures Occasionally Get Too High or Low
While you’ll want to keep your Mother of millions in the optimal temperature range as much as possible, they won’t die instantly if temperatures drop or rise. Mother of millions have even been known to survive at temperatures below 0 ℃ for small amounts of time. Temperature fluctuations will usually cause your plants to enter a state of dormancy, going into survival mode and utilizing less water. You’ll want to return them to the correct range as soon as possible, but don’t think all is lost if the temperature suddenly shifts.
Tip #3: Avoid Placing Your Mother of millions in Extreme Heat
When exposed to very high temperatures for extended periods of time, Mother of millions will begin to change and experience damage. The changes may seem aesthetically pleasing at first, with the leaves changing into muted shades of red, yellow, and orange. But eventually they will begin to wither as the plant succumbs to sun damage, eventually stopping it's growth entirely and causing your Mother of millions to die.
Read More more
Does Mother of millions need different temperatures for different seasons?
Mother of millions actively grow in winter, though their flowers won’t appear until the warmer temperatures of spring. If you are planting these succulents indoors, the seasons won’t affect their temperature requirements very much. The focus will be more on the ability for the plants to get the right amount of sunlight.
Winters can make it more difficult for Mother of millions to get the right amount of light, while summers can provide an overabundance. Too much sunlight can damage the leaves and stems of the plant, slowing their growth or halting it entirely. Keep your Mother of millions in an area with bright but indirect light to see the best results.
Read More more
What is the best way to keep my Mother of millions at the optimal temperature?
If you are growing your Mother of millions indoors, you’ll want them kept in an area of your home with a climate control system. This system can be an A/C unit if you live in a warmer region or a heater if you live in a colder region, though the air from either should not come directly in contact with the plants. Try to have as much natural air as possible without drastically shifting the surrounding temperature. You’ll also want to be mindful of the sunlight they experience, keeping them in rooms with ample, but indirect, window lighting.
If your Mother of millions is outside, you’ll want to control the temperature by positioning it for optimum sunlight. This means avoiding the direct sunlight and heat of midday; Mother of millions is full sun or partial shade plants, dappled sunlight filtered through a tree, plant, or fabric structure is the best. An overabundance of sunlight can also expose them to high temperatures, putting them at risk of dormancy and damage.
Read More more
left right
Cultivation:SoilDetail

What Soil is Best for Mother of millions?

Soil is very important for the growth of mother of millions, which must be loose and ventilated. Generally speaking, the soil is divided into three layers from top to bottom, namely, the top deco layer, the middle planting layer, and the lower hydrophobic layer, which requires different types of soils.
The top deco soil is paved on the soil surface for the decoration and fixation of plants. Some can prevent diseases and insect pests. When it's completely dry, it's time to water. There are many types of soil that can be used as top deco soil, such as white pebble, akadama soil, kiryuu sands, kanuma soil, etc. You can select proper ones according to different pots and plants.
The middle layer soil can fix plants and provide nutrients for plants to grow. You can buy the configured succulent planting soil directly in store, or buy soil materials to mix by yourself. The common soil formulation for this layer is peat moss : perlite : volcanic rock : vermiculite = 4:2:2:2.
The soil of the lower hydrophobic layer is placed at the bottom of the flowerpot or garden pit. It can evacuate the excess water in the succulent root system and prevent the root system from rotting due to water accumulation. The hydrophobic layer can be made of ceramsite, volcanic stone or other large-scale culture media. Coal slag or charcoal are also good choices. If it is planted in the garden, it is necessary to make sure that the bottom drainage layer is in good water permeability.
Cultivation:SoilDetail
Cultivation:PropagationDetail

How to Propagate Mother of millions?

There are many ways of propagation of succulent plants; seeds can be collected for sowing, but they are difficult to germinate. It is more common to use leaves for cutting propagation, generally in spring and autumn. Select a whole leave of a healthy plant, cut it off with a knife, and lay it flat on the slightly humid soil, with the leaf base close to the soil. Provide it with suitable temperature (25 ℃) and light (bright scattered light). In a week or two, a bud will grow at the leaf base.

Propagation

Mother of millions is a special plant that can produce new plants on its leaves; those new plants grow roots after falling to the ground or being planted in the ground. So it is possible to reproduce through this special nature. Before you can propagate a Mother of millions, you’ll need to wait for the plant to become mature with a long stalk. Once your Mother of millions is mature enough, it will begin to develop buds on the stalk, then develop leaves and a root system. Once the roots begin to develop, you can easily remove the buds from the Mother of millions and propagate a clone of the parent plant.
Having the correct set of tools will make it much easier for you to propagate your Mother of millions. The essential items that you’ll need to gather before starting the process are the following
  1. A small pair of pruning shears or scissors
  2. Diluted bleach solution or isopropyl alcohol to clean tools
  3. potting mix soil
  4. A small to medium-sized garden container
Steps: Step 1: Wait until your mature Mother of millions has developed a buds with healthy leaves and a few roots that have reached a few inches long each. Step 2: Use your pruning shears or scissors to cut the flower stalk and remove the buds. The tools should be sterilized before pruning. Step 3: Cut off any excess stalk portions that remain attached above or below the buds. Step 4: Fill your garden container with potting mix soil. Step 5: Plant your buds in the container. Step 6: Add water to the container without allowing it to touch the plant itself, as this can cause rot easily. Cutting is also a relatively common way of propagating Mother of millions. The active growing season during the spring and summer is the best time to propagate Mother of millions. During this period, the plants are generating a lot of energy for new growth and should have plenty of stems that can be used for propagation. They can also recover from having cuttings taken during this season than during the slower autumn and winter seasons.
The following are what you need to prepare before propagation can take place.
  1. Sharp scissors or knife
  2. Diluted bleach solution or isopropyl alcohol to clean tools
  3. Pot(s) or nursery tray with drainage holes
  4. Special soil for succulents
  5. Clear plastic bag or a humidity dome for covering cuttings
  6. Rooting hormone (optional but recommended)
Steps: Step 1: Prepare containers by filling them with moistened planting material leaving about half an inch of space from the top of the container. Step 2: Choose healthy parts for propagation. Using your sterilized scissors, trim the leaves from the part of the stem that is inserted into the soil below, leaving only the stem, as the leaves rot easily when buried in the soil. The length of the cutting should not be too long, for once the cutting takes root, it has actually become an individual plant. No body wants a plant to grow long and thin from the beginning. Be sure to make a clean cut, and don’t crush the stem as that can leave the plant vulnerable to infection. Sterilize cutting tools between plants if you are taking multiple cuttings. Step 3: Leave them for 1-2 days, as you need to wait for the cut wounds to dry before taking cuttings. Dip the bottom end of the cutting into rooting powder (if using) according to the directions. Step 4: Make a hole in the soil for each cutting, and place the cutting inside so that the soil line is at the lower leaves. Press soil around the cutting, then repeat until all cuttings are planted and then water thoroughly. Step 5: Place it in a location where the cuttings can get light but no direct sunlight, as this can be too intense for cuttings. Water occasionally and do not let the Mother of millions dry out. Most species will begin to produce roots in about 3 weeks, After rooting, the plant will gradually grow new leaves, at which time you can start to harden off the Mother of millions. Hardening off involves gradually exposing the Mother of millions to more sunlight so that they have time to adjust before being moved permanently outside. Hardening off should usually take about 1 to 2 weeks depending on the outdoor conditions and the type of Mother of millions. After this period, Mother of millions can be planted in containers or directly in the ground.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
close
Cultivation:PropagationDetail
Cultivation:PlantingDetail

How to Plant Mother of millions?

When planting, you can first add the soil of the lower hydrophobic layer to the flowerpot, and then add a small amount of soil of the planting layer. Then spread out the root system of the plant and put them in. Cover the plant root with planting soil slowly, then add the top deco soil, and finally pour water once. If it is planted in the garden, you need to dig a pit 1.5-2 times the size of the root system first, and then follow the above steps.
In order to make it grow better and faster, or if the roots are too dense or unhealthy, it needs to be repotted. It is recommended to repot in spring and autumn. Before repotting, stop watering a few days in advance, after the soil is dried, you can gently knock the pot outside. Or you can use a knife to separate the soil from the pot. When pulling the plant up slightly, you can easily take out the plant, and then follow the steps described in the previous paragraph.
It should be noted that, though you can plant different colors of succulent plants together, it is better to avoid planting succulent plants with different growth habits together. Some succulent plant growing in summer needs water, while other succulent plant in dormancy period does not need water. If they are planted together, the succulent plant in dormancy period will become sick due to excessive watering, while the succulent in growing period will wither due to insufficient water.
Cultivation:PlantingDetail
PlantCare:TransplantSummary

How to Transplant Mother of millions?

The perfect time to transplant mother of millions is during the early to mid-spring, as warmer temperatures promote root growth. Choose a location with well-draining soil and bright, indirect sunlight. If needed, gently loosen the roots before placing in the new site for a seamless transition.
PlantCare:TransplantSummary
care_scenes

More Info on Mother Of Millions Growth and Care

Basic Care Guide
Explore More
Lighting
Full sun
Mother of millions appreciates being bathed in generous amounts of sunshine throughout the day, although it can manage with a mixed shade and sun exposure. Its native habitat is sun-drenched, and because of this, an abundance or shortage of light may result in a lackluster or weakened plant respectively.
Best Sunlight Practices
Temperature
5 - 43 ℃
As a mother of millions native to warm climates, it thrives in temperatures ranging from 68 to 100 ℉ (20 to 38 ℃). During winter months, it's important to keep the plant away from drafts and colder temperatures to prevent damage. In summer, it can tolerate slightly higher temperatures, but it's best to avoid exposing it to direct sunlight during midday heat.
Temp for Healthy Growth
Transplant
8-12 inches
The perfect time to transplant mother of millions is during the early to mid-spring, as warmer temperatures promote root growth. Choose a location with well-draining soil and bright, indirect sunlight. If needed, gently loosen the roots before placing in the new site for a seamless transition.
Transplant Techniques
Pollination
Normal
Mother of millions, commonly known as Mother of Millions, is majorly pollinated by bees, drawn by vibrant, bell-shaped flowers. The bloom schedule is remarkably punctual, offering a reliable buffet to its buzzing guests. Ensuring the continuity of its lineage, the scientific marvel of mother of millions's pollination mechanism is a display of the harmonious coexistence of flora and fauna.
Pollination Techniques
Feng shui direction
Southwest
The mother of millions plant aligns splendidly with the gentle energy of the Southwest direction in Feng Shui philosophy. Its unique growth pattern seemingly links to the element of Earth, represented dominantly in this quadrant. However, individual experiences may diverge considering Feng Shui's subjective and personal nature.
Fengshui Details
care_seasonal_tips

Seasonal Care Tips

seasonal-tip

Seasonal Precautions

In summer, there are several ways to ensure ventilation:
  1. use loose soil;
  2. use a ceramic pot with good air permeability;
  3. keep the potted plants in a multi-ventilated environment.
In summer, it is necessary to avoid too strong light: for potted plant, it can be moved to a proper place, and if planted outdoors, it can be provided with a shading net. In addition, it is necessary to avoid direct sunlight after watering as this will burn the leaves.
In high temperature, varieties with thick leaves need to reduce water supply earlier, because they have high water content in their leaves and are easy to hydrate under high temperature. Of course, they can't get wet. Reducing water supply can make plants enter dormancy state smoothly and avoid being hurt by high temperature in summer.
seasonal-tip
more

Spring

more

Summer

more

Fall

more

Winter

This plant and other types of cool-weather succulents perform best with pruning in the early spring.

more
1
Cut the stems back to a couple of inches above the soil but be careful not to remove any new growth.
more
2
Spring is also the time to divide the plants if necessary.
more
3
Water only when rainfall is less than a couple of inches every few weeks.
more
4
The plant requires little extra nutrients, but a light application of a fertilizer comprised for succulents can help support healthy growth.
more
5
Check for any roots growing above the soil or out of the drainage holes. If so, it’s time to move the plant to a larger container.

Cool weather-loving succulents like this plant require little care in the summer.

more
1
When rainfall is under two inches every few weeks check the soil’s moisture level. If it is dry, water sparingly.
more
2
Pinching off spent blooms can encourage flowering in the late summer and fall. Leave the seed heads on to add garden interest in the winter.
more
3
Move container plants into the shade during summer dormancy.

In the fall, your plant should be waking up from its summer dormancy.

more
1
You can clean up this plant, removing any dead or diseased branches during this time. Succulents don’t require extra pruning.
more
2
Start fertilizing the plant with diluted, slow-release fertilizer to provide it with necessary nutrients; a type made for succulents should suffice.
more
3
While the weather remains warm or cool, you can water the plant using the soak-and-dry method, making sure the soil is dry before watering the plant.
more
4
Plenty of indirect light will help your plant grow and thrive. You may also propagate the plant during this time, planting new offshoots in fresh pots.

Most likely, your plant will continue growing during this time, even with the freezing winter temperatures.

more
1
Make sure it has a lot of sunlight in this season to make sure it’s growing well.
more
2
Keep watering, but reduce the amount given to the plant, especially in temperatures that are reaching freezing, or when the plant is covered in snow.
more
3
You can choose to move potted varieties indoors to keep it away from the worst of the winter weather, or leave it outdoors, where it should survive and decorate your garden.
more
4
These plants will need little to no pruning or fertilizing, even during the winter months.
care_pet_and_diseases

Common Pests & Diseases

Common issues for Mother of millions based on 10 million real cases
Scars
Scars Scars
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Solutions: Each source of scarring requires a different approach to help your plant recover. Protect the trunk and leaves from physical damage like scrapes. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs. Frequent leaf or bud loss may be due to insufficient light or nutrients.
Flower withering
Flower withering Flower withering
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Solutions: If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible. For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface. In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well. If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Low light
Low light Low light
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Solutions: Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed. Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn. Introduce appropriate artificial lighting. Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Brown spot
Brown spot Brown spot
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
autodiagnose

Treat and prevent plant diseases.

AI-powered plant doctor helps you diagnose plant problems in seconds.
close
Scars
plant poor
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Symptom Analysis
Symptom Analysis
Scars form when the plant repairs wounds. They can be the result of people or pets passing by and scraping the plant. Once the underlying issue is resolved, the plant will heal but a scar may remain.
Pests and pathogens can also cause scarring. Insects may attack the plant for a meal, resulting in extensive scarring when a few invaders turn into an infestation. Diseases such as fungus and bacteria can weaken the plant, causing brown spots, mushy areas, or blisters that lead to scars.
Scars occur on stems when a leaf or bud has been lost and the plant has healed. The harder tissue is like a scab that protects a wound.
On other occasions, scars can signal problems from environmental conditions, such as overexposure to sunlight or heat. It might surprise you to know that plants can suffer from sunburn, even desert dwellers like cactus!
Solutions
Solutions
Each source of scarring requires a different approach to help your plant recover.
  1. Protect the trunk and leaves from physical damage like scrapes.
  2. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray.
  3. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs.
  4. Frequent leaf or bud loss may be due to insufficient light or nutrients.
Prevention
Prevention
Preventing some sources of scarring is easier than others, but all start with careful attention to your plants once you decide to bring them home.
  1. Review specific guidelines for your plant, including soil drainage, watering, and fertilizer requirements.
  2. Inspect plants before planting and use sterile pots and fresh potting soil or media to limit transfer of fungi or bacteria.
  3. Once established, check your plants regularly for signs of scarring or the presence of pests, as it is better to catch problems as early as possible.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
Flower withering
plant poor
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Overview
Overview
Flower withering occurs when flowers become weak, droopy, wilted, or faded until they can’t be revived. During withering, they begin to wrinkle and shrink until the flower becomes completely dry or dead.
Any flowers, regardless of the plant type or the climate they are grown in, are susceptible to withering. It is a worldwide problem across houseplants, herbs, flowering ornamentals, trees, shrubs, garden vegetables, and food crops.
Unlike wilting—which withering is often confused with—withering can be caused by different things and is often due to more than a lack of water. Withering can be fatal in severe cases.
Symptom Analysis
Symptom Analysis
Flower withering progresses from very mild cases to severe occurrences that kill the flower. The severity of the symptoms is related to the cause and how long the condition is allowed to progress before action is taken.
  • Wilted, droopy flowers
  • Petals and leaves begin to wrinkle
  • Brown papery streaks or spots appear on the petals and leaf tips
  • Flowerhead shrink in size
  • Petal color fades
  • Yellowing leaves
  • Complete death of the flower
Disease Cause
Disease Cause
The main causes of flower withering include natural age progress, lack of water, nutritional deficiencies, and bacterial or fungal diseases. It’s critical to determine the underlying cause when flower withering is noticed. This will guide the best course of action, if treatment is possible.
Check the soil for moisture and then closely examine the entire plant for signs of nutrient deficiencies. If neither of those appears to be the cause then cut open the stem below a flower. If a cross-section reveals brown or rust-colored stains it is safe to assume that this is a bacterial or fungal infection.
If the flower is nearing the end of its normal lifespan, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence, or cell aging and death. Cell division stops and the plant begins breaking down resources within the flower to use in other parts of the plant.
In all other cases, flower withering happens when the plant seals off the stem as a defense mechanism, stopping transport within the vascular system. This prevents further water loss through the flowers but also stops bacteria and fungi from moving to healthy parts of the plant. Once water and nutrient transport stops, the flower begins to wither and ultimately die.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
Low light
plant poor
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Overview
Overview
All plants require light, and if they do not receive it in the quantities that they require this distorts their growth in a process known as etiolation. In essence, etiolated plants are diverting all of their energy to growing taller in a desperate attempt to reach a position where they can meet their light requirements. Many other growth factors are harmed by this, and so light-deprived plants can become weak and distorted until they are almost unrecognizable. Low light symptoms are most commonly seen in houseplants, but outdoor specimens can also be affected.
Symptom Analysis
Symptom Analysis
Although symptoms will vary in different plants, the general symptoms of low light are easy to spot.
  1. Plant stems grow tall and lanky.
  2. There are less leaves, and both leaves and stems tend to be pale and insipid looking. This is due to a shortage of chlorophyll.
  3. All plant parts become weakened and may droop, as energy is diverted toward too-fast growth as the plant stretches itself toward any source of light.
Disease Cause
Disease Cause
Plants need sunlight in varying amounts for photosynthesis – a process that produces energy for growth and fruit and flower production. Low light causes a plant to divert all energy to upward (apical) growth in order to find better light. Plant hormones called auxins are transported from the actively-growing tip of the plant downwards, to suppress lateral growth. A drop in cellular pH triggers expansins, nonenzymatic cell wall proteins, to loosen cell walls and allow them to elongate. This elongation results in the abnormal lengthening of stems, especially internodes, or plant "legginess" which is observed in etoliated plants.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
Brown spot
plant poor
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
  • Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
  • Placement is often random and scattered as diseases are spread through raindrops.
  • May appear on lower leaves and the interior of the plant where humidity is higher.
  • Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
  • Leaf margins may turn yellow.
  • Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
  • Blotches grow in size until the entire leaf is brown.
  • The leaf falls off the plant.
Severe Symptoms
  • Partial or complete premature defoliation
  • Reduced growth
  • Increased susceptibility to pests and other diseases
Disease Cause
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
care_toxicity

Mother Of Millions and Their Toxicity

Toxic to Cats
Toxic to Cats
Mother of millions is a common houseplant that is moderately to severely toxic to cats if ingested. Its toxins can affect the levels of electrolytes in the cat's heart. Symptoms can include rapid heart rate, vomiting, drooling, and dilated pupils. It can be lethal if ingested in large amounts so it's important to contact your veterinarian if you suspect your cat has eaten any part of this plant.
close
Who Is Most at Risk of Plant Poisoning?
Your pets like cats and dogs can be poisoned by them as well!
1
Do not let your lovely pets eat any parts, nor contact with the sap of toxic or unknown plants;
2
It’s better to kill those growing around your house. Wear long-sleeved shirts, pants and gloves with sharp tools to dig it out completely;
3
Clean the tools with rubbing alcohol or soap and water but do not do that with bare hands;
4
Clean your hands and skin once exposed to plants with soap and water;
5
Consider using barrier creams that contain bentoquatam to prevent poison oak, ivy and sumac rashes;
6
Dump it in special trash cans in sealed garbage packages, and do not let your pets reach it;Do not let your lovely pets eat any parts, nor contact with the sap of toxic or unknown plants;
7
If you take your pets to hike with you in the wild, please don’t let them eat any plants that you don’t know;
8
Once your pets eat, touch or inhale anything from toxic plants and act abnormally, please call the doctors for help ASAP!
pets
Pets
Some pets are less likely than children to eat and touch just about everything. This is good, as a pet owner. However, you know your pet best, and it is up to you to keep them safe. There are plenty of poisonous weeds that can grow within the confines of your lawn, which might make your dogs or cats ill or worse if they eat them. Try to have an idea of what toxic plants grow in your area and keep them under control and your pets away from them.
pets
Common Toxic Houseplants
Common Toxic Houseplants
When it comes to decorating a house, there is nothing more refreshing than adding some beautiful houseplants. Some common house plants can also be toxic.

Aloe

aloe
Aloe is famous for its sunburn-soothing properties and its gorgeous desert design. However, many people do not realize that the latex the aloe vera plant produces can be mildly toxic to pets and children.

The latex contains a chemical compound known as saponin. Which when ingested, can cause vomiting, diarrhea, and low blood sugar. This, if left unchecked, can lead to dehydration and electrolyte imbalance. The proper response is to contact poison control or a veterinarian to know what to do in your particular circumstance if either your child or pet consumes aloe.

The latex of the plant is similar to the sap of the tree. It is inside the leaf, but sticks mainly toward the edges. If aloe gel is prepared properly it should be safe for use, but be sure to apply it only topically when treating burns.

Philodendron

Philodendron
Philodendron, also known as sweetheart vine, has become a resident at many houses and even businesses. They are glossy green and the leaves elegantly split, displaying interesting designs. Behind this beauty there is a needle-like toxin called calcium oxalate crystals.

These crystals are held within the plant and only affect you, your pets, or your loved ones if the plant tissue is broken. If ingested, the crystals can cause severe swelling, difficulty breathing, stomach pain, burning and pain. If they are accidentally caught on the skin, they can cause skin irritation.

If anyone accidentally ingests philodendron and they find it difficult to breathe or their tongue starts to swell up, it is important to seek medical attention immediately to avoid suffocation. If you have very young children or pets who have a tendency to tear at plants, keep them away from any philodendrons.

Peace Lily

Peace Lily
Peace lilies produce stunningly white flowers that bring to mind peace and serenity. This is one reason they are invited into our homes and given a place to stay. However, similar to philodendrons, the peace lily contains oxalate crystals known as raphides.

The raphides, once ingested, will cause swelling and burning sensations and can also cause skin irritation. Both pets and humans can get these symptoms so it is important to keep these plants from anyone who is likely to tear or chew it. Symptoms can become dire if the raphides cause the tongue and throat to swell to a point where the person or pet is having difficulty breathing. Seek proper medical attention if this is the case.

Snake Plant

Snake Plant
The snake plant is an interesting and popular house plant. Its stark architecture and wavy coloring has made it a fan favorite. This plant too, however, is toxic when ingested or if the sap touches your skin.

Snake plant sap will cause rashes if it comes into contact with your skin. In addition, it will cause diarrhea and vomiting when ingested. Again these symptoms are very serious and would be best avoided by keeping snake plants out of reach or by choosing a different houseplant.
Common Toxic Garden Plants
Common Toxic Garden Plants

Daffodil

Daffodil
Daffodils are a strikingly colorful flower. This can sometimes bring them much attention not from just onlooking adults but children as well. Since kids are more drawn to colorful objects, they may have a higher chance of just grabbing the flower and eating it. Adults have also been known to accidentally grab daffodil bulbs instead of onions.

Why are these mistakes so dangerous? Daffodils contain lycorine, which can induce nausea, vomiting, and diarrhea. It also contains oxalates which can cause swelling and pain. The symptoms can be worse in animals, because if your pets eat daffodils they may experience drowsiness, low blood pressure or even liver damage.

Make sure to call poison control when these symptoms set in. The vomiting and diarrhea have been known to go away after 3 hours, but it is better to be safe than sorry. Ingesting liquids to keep hydration up can be important. If the patient is having difficulty breathing, seek medical attention immediately.

Hydrangea

Hydrangea
Hydrangeas are unique, with their soft blue and pink flowers. They are a great addition to any garden, but should not be snacked on—not that you would want to. Hydrangeas can be especially nasty because they contain compounds known as glycosides. These will release hydrogen cyanide into the bloodstream when consumed. This will block your body’s ability to uptake oxygen to the cells in your body.

The way to combat this kind of poisoning is through getting IVs from the vet or doctor. It is important to contact your medical professional immediately since the symptoms can be fatal within minutes or hours.

Rhododendrons

Rhododendrons
Rhododendron, the state flower of Washington, is also toxic. The multitudinous, pink flowers can be quite dangerous. All parts of this plant are toxic, the leaves and seeds more so than the flowers. However, even the nectar of the flower is toxic and in the Mediterranean, where rhododendrons grow in more dense quantities, the honey from bees who gather rhododendron nectar can be poisonous.

Normally kids and pets do not eat enough to experience the full poisoning effect. However, just eating two leaves is enough to be considered dangerous. The grayanotoxin glycosides within the rhododendron can cause vomiting, diarrhea and irregular heartbeats. Things can get very serious when too much rhododendron is consumed and can lead to necessary medical intervention.

Start by calling poison control first if you suspect anyone has been munching on rhododendrons. The experts there will be able to help guide you through the necessary processes to cure your loved one.

Rhubarb

Rhubarb
Yummy rhubarb has a nasty side to it. While the stems are used in many recipes, including for rhubarb strawberry pie, the leaves are toxic. They contain oxalic acid which is known to blister the mouth, cause nausea, vomiting, diarrhea and kidney stones. The leaves are known to be more toxic to pets than humans, but in either case, it is important to contact poison control immediately to figure out necessary steps to cure the patient.
Common Toxic Weeds in the Yard
Common Toxic Weeds in the Yard

Bittersweet Nightshade

Bittersweet Nightshade
Nightshade is an invasive, noxious weed that is extremely poisonous. It has been found along the East and West Coast of the U.S. It makes its home in areas with disturbed soil. This could be near your garden or areas that have recently had bushes/trees put in.

These plants are dark green with purple flowers that develop into bright red berries. The whole plant is toxic and should be avoided by pets and children alike. If ingested it can cause nausea, vomiting, and diarrhea. The colorful berries are especially enticing to young children. If you see any plants that look similar to tomato or pepper plants that you did not plant in your yard, it is best to just pull them immediately.

Call poison control immediately if you think someone has fallen victim to nightshade.

Buttercups

Buttercups
Buttercups are found throughout the United States, especially in wet areas. The shiny, yellow flowers will pop up in the springtime, accompanying their dandelion friends. However, unlike dandelions, buttercups are not edible.

Buttercups will release a compound called protoanemonin. This toxin is known to cause vomiting, diarrhea, bloody stool, hypersalivation, depression, blisters, and more. These symptoms will affect both humans and animals. The sap may also cause irritation when it comes into contact with skin. These yellow flowers are dangerous and children should be observed cautiously when around them.

Foxgloves

Foxgloves
Foxgloves are beautiful plants that build towers out of vivid purple bell-shaped blossoms. They are very pretty to look at, but they contain a compound known as digoxin. This chemical is used in certain medicines to help people with certain heart conditions. However, the medicine is made by specialists, whereas someone eating foxgloves will receive unregulated amounts of the chemical.

This toxin can make you vomit and lower your heartbeat. This often causes dizziness and faintness. It is extremely important to call poison control immediately to know what to do in the case of foxglove poisoning. Some people have confused the young leaves of foxglove with borage, making adult foragers at risk as well as kids and pets.
How to Tend to or Get Rid of Toxic Plants
How to Tend to or Get Rid of Toxic Plants
Now that you know where to start with toxic plant identification, let us discuss how to either tend to the poisonous plants you decide to keep or get rid of them that plague your yard.

How to Tend to Poisonous Plants

Many plants that are toxic when ingested are also skin irritants. The philodendron is a good example of this. When the sap comes into contact with skin, it can cause a rash to form. To help protect yourself when tending to toxic plants, it is important to wear some sort of gloves.
Tend
Latex gloves may be the best solution due to their disposability. Regular gloves could potentially keep the poisonous sap on their surface. If the gloves aren’t cleaned then you could accidentally touch the irritant or pass it to someone else.

In addition you will want to plan where to keep your deadly beauties. If you have a toxic indoor plant try to keep it up high or out of reach of children and pets. This will keep accidents few and far between. Another idea is keeping your plants in areas that are usually inaccessible to children or pets. Areas such as an office, study room, or guest bedroom could be good locations. If applicable, you could also set up a terrarium for your little plant baby, making it more difficult for curious hands or paws to access.
tend2
If you plan to have outdoor plants, location will be key. You will want to put plants in an area that will be inaccessible to children, pets and even wild animals. You will probably want to avoid planting the plants in the front of your house if kids walk by on a regular basis, just to be cautious. Having the plants behind a fence will be best, but use your discretion when choosing a spot.

How to Get Rid of Poisonous Plants

plants
The easiest but possibly most controversial way to get rid of poisonous plants is by using herbicides. This can be especially easy if you own a grass lawn and use an herbicide that targets broadleaf (non-grass) species. You can find many herbicides meant for yard use by simply searching the term online. Once you have purchased the herbicide you will want to make sure to follow the label posted on the container. If you follow the instructions precisely, then everything should run smoothly for you.

If you don’t plan on using herbicides, there are a few organic methods you can use to try to get rid of toxic plants. You can manually pull the plants out of the ground. This is probably one of the most difficult methods because there is no assurance that you will get the whole plant out this way.

You can also try pouring boiling hot water or spraying white vinegar on the target plants. This may take more time than using a synthetic herbicide, but you can feel a little better about using these products.

You can also try to use wood chips to cover a certain area where you do not want anything to grow. This will not stop all the weeds, but the few that make it through can be easily picked by hand.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
Who Is Most at Risk of Plant Poisoning?
Everyone should keep the following in mind to prevent being poisoned:
1
Do not eat any parts, nor contact with the sap of toxic or unknown plants;
2
If you need to kill it, wear long-sleeved shirts, pants and gloves with sharp tools to dig it out completely;
3
Clean the tools with rubbing alcohol or soap and water but do not do that with bare hands;
4
Clean your hands and skin once exposed to plants with soap and water;
5
Consider using barrier creams that contain bentoquatam to prevent poison oak, ivy and sumac rashes;
6
Dump it in special trash cans in sealed garbage packages;
7
Wear properly when you hiking or working in the wilderness. Long pants, long sleeves, gloves, hiking shoes, etc., that protect you from being hurt by any plants;
8
Once you or your family aren’t feeling well after eating, touching or inhaling anything from toxic plants, please call your doctor for help ASAP!
Outdoor Workers
Outdoor Workers and Recreationalists
Those who enjoy the outdoors either as a hobby or as part of their work will rarely see a plant and decide to munch on it (although the scenario is not unheard of). However, they do tend to deal with moving through and brushing aside plants. These people are more at risk of being poisoned by touching toxic plants than by ingesting them.
Outdoor Workers
Foragers
Foragers
Foraging for food and medicinal plants is a desirable skill among people who want to feel at one with the land. This hobby can be very useful and enjoyable, but if done wrong , it can lead to disastrous effects. People who forage are picking and grabbing plants with the full intention of using those plants, most of the time to ingest them.
Foragers
Children
Children
While outdoor workers are more likely to touch poison and foragers are more likely to ingest poison, children can easily do both. These bundles of joy just love to run around and explore the world. They enjoy touching things and occasionally shoving random stuff in their mouth; this is a terrible combination with toxic plants in the mix.
If you let your children run about, it is important to know what are the local toxic plants that they could accidentally get into. Try to educate the children and steer them away from where the toxic plants are located.
Children
Common Toxic Houseplants
Common Toxic Houseplants
When it comes to decorating a house, there is nothing more refreshing than adding some beautiful houseplants. Some common house plants can also be toxic.

Aloe

aloe
Aloe is famous for its sunburn-soothing properties and its gorgeous desert design. However, many people do not realize that the latex the aloe vera plant produces can be mildly toxic to pets and children.

The latex contains a chemical compound known as saponin. Which when ingested, can cause vomiting, diarrhea, and low blood sugar. This, if left unchecked, can lead to dehydration and electrolyte imbalance. The proper response is to contact poison control or a veterinarian to know what to do in your particular circumstance if either your child or pet consumes aloe.

The latex of the plant is similar to the sap of the tree. It is inside the leaf, but sticks mainly toward the edges. If aloe gel is prepared properly it should be safe for use, but be sure to apply it only topically when treating burns.

Philodendron

Philodendron
Philodendron, also known as sweetheart vine, has become a resident at many houses and even businesses. They are glossy green and the leaves elegantly split, displaying interesting designs. Behind this beauty there is a needle-like toxin called calcium oxalate crystals.

These crystals are held within the plant and only affect you, your pets, or your loved ones if the plant tissue is broken. If ingested, the crystals can cause severe swelling, difficulty breathing, stomach pain, burning and pain. If they are accidentally caught on the skin, they can cause skin irritation.

If anyone accidentally ingests philodendron and they find it difficult to breathe or their tongue starts to swell up, it is important to seek medical attention immediately to avoid suffocation. If you have very young children or pets who have a tendency to tear at plants, keep them away from any philodendrons.

Peace Lily

Peace Lily
Peace lilies produce stunningly white flowers that bring to mind peace and serenity. This is one reason they are invited into our homes and given a place to stay. However, similar to philodendrons, the peace lily contains oxalate crystals known as raphides.

The raphides, once ingested, will cause swelling and burning sensations and can also cause skin irritation. Both pets and humans can get these symptoms so it is important to keep these plants from anyone who is likely to tear or chew it. Symptoms can become dire if the raphides cause the tongue and throat to swell to a point where the person or pet is having difficulty breathing. Seek proper medical attention if this is the case.

Snake Plant

Snake Plant
The snake plant is an interesting and popular house plant. Its stark architecture and wavy coloring has made it a fan favorite. This plant too, however, is toxic when ingested or if the sap touches your skin.

Snake plant sap will cause rashes if it comes into contact with your skin. In addition, it will cause diarrhea and vomiting when ingested. Again these symptoms are very serious and would be best avoided by keeping snake plants out of reach or by choosing a different houseplant.
Common Toxic Garden Plants
Common Toxic Garden Plants

Daffodil

Daffodil
Daffodils are a strikingly colorful flower. This can sometimes bring them much attention not from just onlooking adults but children as well. Since kids are more drawn to colorful objects, they may have a higher chance of just grabbing the flower and eating it. Adults have also been known to accidentally grab daffodil bulbs instead of onions.

Why are these mistakes so dangerous? Daffodils contain lycorine, which can induce nausea, vomiting, and diarrhea. It also contains oxalates which can cause swelling and pain. The symptoms can be worse in animals, because if your pets eat daffodils they may experience drowsiness, low blood pressure or even liver damage.

Make sure to call poison control when these symptoms set in. The vomiting and diarrhea have been known to go away after 3 hours, but it is better to be safe than sorry. Ingesting liquids to keep hydration up can be important. If the patient is having difficulty breathing, seek medical attention immediately.

Hydrangea

Hydrangea
Hydrangeas are unique, with their soft blue and pink flowers. They are a great addition to any garden, but should not be snacked on—not that you would want to. Hydrangeas can be especially nasty because they contain compounds known as glycosides. These will release hydrogen cyanide into the bloodstream when consumed. This will block your body’s ability to uptake oxygen to the cells in your body.

The way to combat this kind of poisoning is through getting IVs from the vet or doctor. It is important to contact your medical professional immediately since the symptoms can be fatal within minutes or hours.

Rhododendrons

Rhododendrons
Rhododendron, the state flower of Washington, is also toxic. The multitudinous, pink flowers can be quite dangerous. All parts of this plant are toxic, the leaves and seeds more so than the flowers. However, even the nectar of the flower is toxic and in the Mediterranean, where rhododendrons grow in more dense quantities, the honey from bees who gather rhododendron nectar can be poisonous.

Normally kids and pets do not eat enough to experience the full poisoning effect. However, just eating two leaves is enough to be considered dangerous. The grayanotoxin glycosides within the rhododendron can cause vomiting, diarrhea and irregular heartbeats. Things can get very serious when too much rhododendron is consumed and can lead to necessary medical intervention.

Start by calling poison control first if you suspect anyone has been munching on rhododendrons. The experts there will be able to help guide you through the necessary processes to cure your loved one.

Rhubarb

Rhubarb
Yummy rhubarb has a nasty side to it. While the stems are used in many recipes, including for rhubarb strawberry pie, the leaves are toxic. They contain oxalic acid which is known to blister the mouth, cause nausea, vomiting, diarrhea and kidney stones. The leaves are known to be more toxic to pets than humans, but in either case, it is important to contact poison control immediately to figure out necessary steps to cure the patient.
Common Toxic Weeds in the Yard
Common Toxic Weeds in the Yard

Bittersweet Nightshade

Bittersweet Nightshade
Nightshade is an invasive, noxious weed that is extremely poisonous. It has been found along the East and West Coast of the U.S. It makes its home in areas with disturbed soil. This could be near your garden or areas that have recently had bushes/trees put in.

These plants are dark green with purple flowers that develop into bright red berries. The whole plant is toxic and should be avoided by pets and children alike. If ingested it can cause nausea, vomiting, and diarrhea. The colorful berries are especially enticing to young children. If you see any plants that look similar to tomato or pepper plants that you did not plant in your yard, it is best to just pull them immediately.

Call poison control immediately if you think someone has fallen victim to nightshade.

Buttercups

Buttercups
Buttercups are found throughout the United States, especially in wet areas. The shiny, yellow flowers will pop up in the springtime, accompanying their dandelion friends. However, unlike dandelions, buttercups are not edible.

Buttercups will release a compound called protoanemonin. This toxin is known to cause vomiting, diarrhea, bloody stool, hypersalivation, depression, blisters, and more. These symptoms will affect both humans and animals. The sap may also cause irritation when it comes into contact with skin. These yellow flowers are dangerous and children should be observed cautiously when around them.

Foxgloves

Foxgloves
Foxgloves are beautiful plants that build towers out of vivid purple bell-shaped blossoms. They are very pretty to look at, but they contain a compound known as digoxin. This chemical is used in certain medicines to help people with certain heart conditions. However, the medicine is made by specialists, whereas someone eating foxgloves will receive unregulated amounts of the chemical.

This toxin can make you vomit and lower your heartbeat. This often causes dizziness and faintness. It is extremely important to call poison control immediately to know what to do in the case of foxglove poisoning. Some people have confused the young leaves of foxglove with borage, making adult foragers at risk as well as kids and pets.
How to Tend to or Get Rid of Toxic Plants
How to Tend to or Get Rid of Toxic Plants
Now that you know where to start with toxic plant identification, let us discuss how to either tend to the poisonous plants you decide to keep or get rid of them that plague your yard.

How to Tend to Poisonous Plants

Many plants that are toxic when ingested are also skin irritants. The philodendron is a good example of this. When the sap comes into contact with skin, it can cause a rash to form. To help protect yourself when tending to toxic plants, it is important to wear some sort of gloves.
Tend
Latex gloves may be the best solution due to their disposability. Regular gloves could potentially keep the poisonous sap on their surface. If the gloves aren’t cleaned then you could accidentally touch the irritant or pass it to someone else.

In addition you will want to plan where to keep your deadly beauties. If you have a toxic indoor plant try to keep it up high or out of reach of children and pets. This will keep accidents few and far between. Another idea is keeping your plants in areas that are usually inaccessible to children or pets. Areas such as an office, study room, or guest bedroom could be good locations. If applicable, you could also set up a terrarium for your little plant baby, making it more difficult for curious hands or paws to access.
tend2
If you plan to have outdoor plants, location will be key. You will want to put plants in an area that will be inaccessible to children, pets and even wild animals. You will probably want to avoid planting the plants in the front of your house if kids walk by on a regular basis, just to be cautious. Having the plants behind a fence will be best, but use your discretion when choosing a spot.

How to Get Rid of Poisonous Plants

plants
The easiest but possibly most controversial way to get rid of poisonous plants is by using herbicides. This can be especially easy if you own a grass lawn and use an herbicide that targets broadleaf (non-grass) species. You can find many herbicides meant for yard use by simply searching the term online. Once you have purchased the herbicide you will want to make sure to follow the label posted on the container. If you follow the instructions precisely, then everything should run smoothly for you.

If you don’t plan on using herbicides, there are a few organic methods you can use to try to get rid of toxic plants. You can manually pull the plants out of the ground. This is probably one of the most difficult methods because there is no assurance that you will get the whole plant out this way.

You can also try pouring boiling hot water or spraying white vinegar on the target plants. This may take more time than using a synthetic herbicide, but you can feel a little better about using these products.

You can also try to use wood chips to cover a certain area where you do not want anything to grow. This will not stop all the weeds, but the few that make it through can be easily picked by hand.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
care_more_info

More About Mother Of Millions

Plant Type
Plant Type
Succulent, Herb
Lifespan
Lifespan
Perennial
Spread
Spread
25 cm
Bloom Time
Bloom Time
Spring, Winter
Flower Size
Flower Size
8 to 16 mm
Plant Height
Plant Height
1.5 m

Usages

Garden Use
Mother of millions is a popular container plant in cooler climates and an ornamental in tropical areas. Often growing in rock gardens, it is used to provide color from spring through summer. Its ability to spread easily from leaf buds allows the flowering succulent to be used as a self-forming ground cover, but it can also become invasive without care.
plantfinder

Find your perfect green friends.

Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
care_faq

Common Problems

Why do its leaves turn yellow and withered?

more more
It's a natural phenomenon that its old leaves turn yellow and wither. Don't be panic. If new buds turn yellow and withered, it is abnormal. It may be caused by lack of some mineral fertilizer or by sunburn.

Why do its leaves wrinkle?

more more
It's generally due to water shortage. When the succulent is lack of water, there will be wrinkles on leaves, or leaves will be shriveled, which reminds you to water them.

Why does it have a very high stem but few leaves?

more more
It is mostly due to the lack of sufficient light, which is the same principle as the growth of common mung bean sprout in Asian market. Lack of light can lead to spindling of plant internode and vulnerableness of plant tissue, which makes the plant prone to be injured. If you're in a similar situation, place the succulent in a well-lit area, and then the situation will slowly improve over time.
plant

Botanist in your pocket

plant
plant

App

plant
close
product icon
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
product icon
17,000 local species +400,000 global species studied
product icon
Nearly 5 years of research
product icon
80+ scholars in botany and gardening
ad
ad
Botanist in your pocket
Scan the QR code with your phone camera to download the app
close
title
Botanist in your pocket
qrcode
Scan QR code to download
About
Basic Care
Advanced Care
More About How-Tos
Seasonal Tips
Pests & Diseases
Toxicity
More Info
FAQ
Mother of millions
Mother of millions
Mother of millions

How to Care for Mother Of Millions

Mother of millions leaves are virgate and densely streaked, with dark green to gray stripes. The top of each leaf usually has 6-7 small lateral buds, which fall to the ground and grow into brand-new plants at the slightest touch. Wild mother of millions is everywhere, and can often be found under eaves, by corners of walls, and on roofs.
symbolism

Symbolism

Endurance and lasting affection, wealth and prosperity
Water
Every 2-3 weeks
Water
Sunlight
Full sun
Sunlight Sunlight detail
Toxic to Pets
care_basic_guide

Basic Care Guide

Cultivation:WaterDetail

How to Water Mother of millions?

Cultivation:WaterDetail
Mother of millions doesn't need much water. For many novices, the most difficult problem is how to water. In fact, it is not recommended to water at a fixed time, but more attention should be paid to the state of succulent plant and specific weather conditions. You can learn how to water the succulent plant correctly from the following five aspects.
A. Weather: in hot weather or low temperature, succulent plant will enter dormancy. In such period, watering should be reduced a little, usually once 1-2 weeks. Since the growth of succulent plant is basically stagnant when it is in dormancy, its absorption of water and nutrients is quite slow. At the same time, it is necessary to keep the environment dry and ventilated. Frequent watering can cause succulent plant to die due to black rot.
B. Time: in summer, it is better to water in the evening to avoid the sun at noon, because high temperature will make the newly watered soil stuffy which makes the root system prone to black rot; it does not matter in other seasons.
C. State of succulent plant: succulent plant will show some obvious symptoms when it is lack of water. For example, healthy leaves of Astridia velutina or Lithops sp. will wrinkle and even curl up when they are short of water. For some succulent varieties, such as Monilaria obconica and Phyllobolus resurgens, their leaves will droop and slouch when they are short of water. That's the signal of water shortage sent by the succulent plant.
D. Soil: you can also determine whether to water by observing the moisture change of the soil. For potted succulent plants, you can weigh the pot in your hand to simply judge the amount of water left in the soil, because the weight of the soil is quite different when there's sufficient water or insufficient water. In addition, if there's a gap between the outer edge of the soil and the inner edge of the pot, or the soil surface cracks, that is also a sign of water shortage.
E. Pot: for pots with good air permeability such as red pot, which is not easy to keep water, so the watering frequency can be higher; for white porcelain pot or pot without holes, the watering frequency can be lower.
waterreminders

Never miss a care task again!

Plant care made easier than ever with our tailor-made smart care reminder.
What is the best way to water my Mother of millions?
more
What should I do if I water my Mother of millions too much or too little?
more
How often should I water my Mother of millions?
more
How much water does my Mother of millions need?
more
Show More more
Cultivation:FertilizerDetail

How to Fertilize Mother of millions?

Cultivation:FertilizerDetail
Most succulent plants are used to growing in the wild where the environment is poor, so they do not need fertilization in their growth cycle. You can add a little slow-release fertilizer in early summer, and it's fine if you do not apply fertilizer. Please remember, don't fertilize it during its dormancy period, because too much nutrients that it can't absorb may cause damages to its growth.
close

Fertilizer

Often found growing in rock gardens and used in xeriscaping, Mother of millions adds plenty of interest and texture to the area. It is a slow-growing plant, and this affects its care. Mother of millions does not require a lot of nutrients to thrive. Knowing when and how to feed your specimen will help ensure you get years of enjoyment from your plant. Fertilizing Mother of millions adds nutrients to the growing medium. Even though it does store water and nutrients, applying plant food during the growing season helps support healthy growth. Fertilizing can also encourage mature specimens to produce blooms in the growing season.
While all plants benefit from additional nutrients, Mother of millions only needs a light dose of fertilizer during the growing season. The frequency of fertilization should be 1-2 times a year. It is suggested to fertilize your Mother of millions in the spring and autumn, but not in winter&summer when it is dormant. Be careful with repotted plants, you will want to reduce the amount of fertilizer. It’s also a good idea to wait a couple of months after repotting before you start applying fertilizer. It’s best to use a liquid plant food formulated for succulents and cacti when you are fertilizing Mother of millions. Dilute the fertilizer with water to half-strength. You do not want the fertilizer building up in the soil. Apply the fertilizer to the base of the plant and water thoroughly, ensuring any excess moisture drains from the container or seeps into the ground.
It is easier to use liquid plant food when you are fertilizing Mother of millions, but granules are another option. Follow the directions on the packaging, making sure you dilute liquid fertilizers to half-strength. Whether you are using granules are liquid plant food, always apply it to the soil. Cover the granules with a thin layer of soil and water regardless of the type of plant food you are using.
Over-fertilizing Mother of millions is a common problem with new and experienced gardeners. The plant has low nutritional needs and it’s easy to apply a little too much fertilizer. Over-fertilizing Mother of millions can burn the plant’s sensitive roots resulting in its slow decay. Without its root system, the plant cannot absorb nutrients and moisture.
Like most plants, Mother of millions has a dormancy period and it is when you want to stop the applications of fertilizer. In the summer and winter, the plant ceases growing, and it is when you want to stop applying fertilizer. It’s also a good idea to cease fertilizing for the first couple of months after repotting in the spring.
Show More
more
Unlock complete care guides for 10,000+ species
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
Why do I need to fertilize my Mother of millions?
more
When is the best time to fertilize my Mother of millions?
more
When should I avoid fertilizing my Mother of millions?
more
What type of fertilizer does my Mother of millions need?
more
Show More more
Cultivation:SunlightDetail

What Are the Sunlight Requirements for Mother of millions?

Cultivation:SunlightDetail
Generally speaking, mother of millions needs sufficient scattered light which should be bright and transparent. If there is not sufficient sunlight for a long time, the plant will be spindling, the tissue will become brittle, and the original color will fade slowly, as a result, the plant will grow into a loose shape, the color will turn green and yellow, and the resistance will decline.
Strong sunlight in summer may burn its leaves and stems. When exposed to the sun, it tends to grow slowly or even stop growing, its leaves grow compactly and internodes shorten, which results in shorter plant. For some succulent plants, their old leaves wither in summer and new leaves tend to be short and compact, showing a bare rod shape as a whole. In summer, you can set up a sunshade for it or move the potted plant indoor.
lightmeter

Know the light your plants really get.

Find the best spots for them to optimize their health, simply using your phone.
How much sunlight does Mother of millions need to grow?
more
What type of sunlight does Mother of millions need?
more
Should I protect Mother of millions from sun exposure?
more
What will happen if Mother of millions doesn't get enough sunlight?
more
Show More more
Cultivation:PruningDetail

How to Prune Mother of millions?

Cultivation:PruningDetail
In order to keep beautiful shape, some large succulent plants may need pruning. For example, in California, for echeveria planted in the garden, some redundant branches and branches that are too dense need to be cut off in spring and autumn. This depends on what you think and what the succulent plant is used for. Tools for pruning mainly include knife, scissors, and some medicines (such as sulfur powder).
In order to propagate new plants, we can also cut some leaves in spring and autumn for cutting. Stout stems with 5-6 leaves are often selected: cut it off with a knife, then smear the wound with sulfur powder, and plant it after the wound is healed. At this time, it is recommended to use a watering can to slightly wet the soil used for cutting.
close
care_advanced_guide

Advanced Care Guide

Cultivation:WaterAndHardinessDetail

What is the Ideal Temperature Range for Mother of millions?

Cultivation:WaterAndHardinessDetail
The suitable growth temperature of mother of millions is above 15 ℃, and it can grow normally in spring, summer and autumn. It can tolerate high temperature, but it will enter the dormancy period when the temperature is higher than 33 ℃ (Sedum lineare is a special species that still grows well under high temperature in summer.). When the temperature is lower than 5 ℃ in winter, it is recommended to move mother of millions indoor to avoid irreversible frostbite or even death.
If you are in a cold region, it is not recommended to plant it directly in the garden, but as a potted plant. When it enters its dormancy, it needs less watering; during its growing season, a small amount of water is needed.
What is the optimal temperature for Mother of millions?
more
Does Mother of millions require different temperatures for different growing phases?
more
Three tips for keeping Mother of millions temperature under control
more
Does Mother of millions need different temperatures for different seasons?
more
Show More more
Cultivation:SoilDetail

What Soil is Best for Mother of millions?

Cultivation:SoilDetail
Soil is very important for the growth of mother of millions, which must be loose and ventilated. Generally speaking, the soil is divided into three layers from top to bottom, namely, the top deco layer, the middle planting layer, and the lower hydrophobic layer, which requires different types of soils.
The top deco soil is paved on the soil surface for the decoration and fixation of plants. Some can prevent diseases and insect pests. When it's completely dry, it's time to water. There are many types of soil that can be used as top deco soil, such as white pebble, akadama soil, kiryuu sands, kanuma soil, etc. You can select proper ones according to different pots and plants.
The middle layer soil can fix plants and provide nutrients for plants to grow. You can buy the configured succulent planting soil directly in store, or buy soil materials to mix by yourself. The common soil formulation for this layer is peat moss : perlite : volcanic rock : vermiculite = 4:2:2:2.
The soil of the lower hydrophobic layer is placed at the bottom of the flowerpot or garden pit. It can evacuate the excess water in the succulent root system and prevent the root system from rotting due to water accumulation. The hydrophobic layer can be made of ceramsite, volcanic stone or other large-scale culture media. Coal slag or charcoal are also good choices. If it is planted in the garden, it is necessary to make sure that the bottom drainage layer is in good water permeability.
Cultivation:PropagationDetail

How to Propagate Mother of millions?

Cultivation:PropagationDetail
There are many ways of propagation of succulent plants; seeds can be collected for sowing, but they are difficult to germinate. It is more common to use leaves for cutting propagation, generally in spring and autumn. Select a whole leave of a healthy plant, cut it off with a knife, and lay it flat on the slightly humid soil, with the leaf base close to the soil. Provide it with suitable temperature (25 ℃) and light (bright scattered light). In a week or two, a bud will grow at the leaf base.
close

Propagation

Mother of millions is a special plant that can produce new plants on its leaves; those new plants grow roots after falling to the ground or being planted in the ground. So it is possible to reproduce through this special nature. Before you can propagate a Mother of millions, you’ll need to wait for the plant to become mature with a long stalk. Once your Mother of millions is mature enough, it will begin to develop buds on the stalk, then develop leaves and a root system. Once the roots begin to develop, you can easily remove the buds from the Mother of millions and propagate a clone of the parent plant.
Having the correct set of tools will make it much easier for you to propagate your Mother of millions. The essential items that you’ll need to gather before starting the process are the following
  1. A small pair of pruning shears or scissors
  2. Diluted bleach solution or isopropyl alcohol to clean tools
  3. potting mix soil
  4. A small to medium-sized garden container
Steps: Step 1: Wait until your mature Mother of millions has developed a buds with healthy leaves and a few roots that have reached a few inches long each. Step 2: Use your pruning shears or scissors to cut the flower stalk and remove the buds. The tools should be sterilized before pruning. Step 3: Cut off any excess stalk portions that remain attached above or below the buds. Step 4: Fill your garden container with potting mix soil. Step 5: Plant your buds in the container. Step 6: Add water to the container without allowing it to touch the plant itself, as this can cause rot easily. Cutting is also a relatively common way of propagating Mother of millions. The active growing season during the spring and summer is the best time to propagate Mother of millions. During this period, the plants are generating a lot of energy for new growth and should have plenty of stems that can be used for propagation. They can also recover from having cuttings taken during this season than during the slower autumn and winter seasons.
The following are what you need to prepare before propagation can take place.
  1. Sharp scissors or knife
  2. Diluted bleach solution or isopropyl alcohol to clean tools
  3. Pot(s) or nursery tray with drainage holes
  4. Special soil for succulents
  5. Clear plastic bag or a humidity dome for covering cuttings
  6. Rooting hormone (optional but recommended)
Steps: Step 1: Prepare containers by filling them with moistened planting material leaving about half an inch of space from the top of the container. Step 2: Choose healthy parts for propagation. Using your sterilized scissors, trim the leaves from the part of the stem that is inserted into the soil below, leaving only the stem, as the leaves rot easily when buried in the soil. The length of the cutting should not be too long, for once the cutting takes root, it has actually become an individual plant. No body wants a plant to grow long and thin from the beginning. Be sure to make a clean cut, and don’t crush the stem as that can leave the plant vulnerable to infection. Sterilize cutting tools between plants if you are taking multiple cuttings. Step 3: Leave them for 1-2 days, as you need to wait for the cut wounds to dry before taking cuttings. Dip the bottom end of the cutting into rooting powder (if using) according to the directions. Step 4: Make a hole in the soil for each cutting, and place the cutting inside so that the soil line is at the lower leaves. Press soil around the cutting, then repeat until all cuttings are planted and then water thoroughly. Step 5: Place it in a location where the cuttings can get light but no direct sunlight, as this can be too intense for cuttings. Water occasionally and do not let the Mother of millions dry out. Most species will begin to produce roots in about 3 weeks, After rooting, the plant will gradually grow new leaves, at which time you can start to harden off the Mother of millions. Hardening off involves gradually exposing the Mother of millions to more sunlight so that they have time to adjust before being moved permanently outside. Hardening off should usually take about 1 to 2 weeks depending on the outdoor conditions and the type of Mother of millions. After this period, Mother of millions can be planted in containers or directly in the ground.
Show More
more
Unlock complete care guides for 10,000+ species
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
Cultivation:PlantingDetail

How to Plant Mother of millions?

Cultivation:PlantingDetail
When planting, you can first add the soil of the lower hydrophobic layer to the flowerpot, and then add a small amount of soil of the planting layer. Then spread out the root system of the plant and put them in. Cover the plant root with planting soil slowly, then add the top deco soil, and finally pour water once. If it is planted in the garden, you need to dig a pit 1.5-2 times the size of the root system first, and then follow the above steps.
In order to make it grow better and faster, or if the roots are too dense or unhealthy, it needs to be repotted. It is recommended to repot in spring and autumn. Before repotting, stop watering a few days in advance, after the soil is dried, you can gently knock the pot outside. Or you can use a knife to separate the soil from the pot. When pulling the plant up slightly, you can easily take out the plant, and then follow the steps described in the previous paragraph.
It should be noted that, though you can plant different colors of succulent plants together, it is better to avoid planting succulent plants with different growth habits together. Some succulent plant growing in summer needs water, while other succulent plant in dormancy period does not need water. If they are planted together, the succulent plant in dormancy period will become sick due to excessive watering, while the succulent in growing period will wither due to insufficient water.
PlantCare:TransplantSummary

How to Transplant Mother of millions?

PlantCare:TransplantSummary
The perfect time to transplant mother of millions is during the early to mid-spring, as warmer temperatures promote root growth. Choose a location with well-draining soil and bright, indirect sunlight. If needed, gently loosen the roots before placing in the new site for a seamless transition.
care_seasonal_tips

Seasonal Care Tips

seasonal-tip

Seasonal Precautions

In summer, there are several ways to ensure ventilation:
  1. use loose soil;
  2. use a ceramic pot with good air permeability;
  3. keep the potted plants in a multi-ventilated environment.
In summer, it is necessary to avoid too strong light: for potted plant, it can be moved to a proper place, and if planted outdoors, it can be provided with a shading net. In addition, it is necessary to avoid direct sunlight after watering as this will burn the leaves.
In high temperature, varieties with thick leaves need to reduce water supply earlier, because they have high water content in their leaves and are easy to hydrate under high temperature. Of course, they can't get wet. Reducing water supply can make plants enter dormancy state smoothly and avoid being hurt by high temperature in summer.
more

Spring

more

Summer

more

Fall

more

Winter

This plant and other types of cool-weather succulents perform best with pruning in the early spring.

more
1
Cut the stems back to a couple of inches above the soil but be careful not to remove any new growth.
more
2
Spring is also the time to divide the plants if necessary.
more
3
Water only when rainfall is less than a couple of inches every few weeks.
more
4
The plant requires little extra nutrients, but a light application of a fertilizer comprised for succulents can help support healthy growth.
more
5
Check for any roots growing above the soil or out of the drainage holes. If so, it’s time to move the plant to a larger container.

Cool weather-loving succulents like this plant require little care in the summer.

more
1
When rainfall is under two inches every few weeks check the soil’s moisture level. If it is dry, water sparingly.
more
2
Pinching off spent blooms can encourage flowering in the late summer and fall. Leave the seed heads on to add garden interest in the winter.
more
3
Move container plants into the shade during summer dormancy.

In the fall, your plant should be waking up from its summer dormancy.

more
1
You can clean up this plant, removing any dead or diseased branches during this time. Succulents don’t require extra pruning.
more
2
Start fertilizing the plant with diluted, slow-release fertilizer to provide it with necessary nutrients; a type made for succulents should suffice.
more
3
While the weather remains warm or cool, you can water the plant using the soak-and-dry method, making sure the soil is dry before watering the plant.
more
4
Plenty of indirect light will help your plant grow and thrive. You may also propagate the plant during this time, planting new offshoots in fresh pots.

Most likely, your plant will continue growing during this time, even with the freezing winter temperatures.

more
1
Make sure it has a lot of sunlight in this season to make sure it’s growing well.
more
2
Keep watering, but reduce the amount given to the plant, especially in temperatures that are reaching freezing, or when the plant is covered in snow.
more
3
You can choose to move potted varieties indoors to keep it away from the worst of the winter weather, or leave it outdoors, where it should survive and decorate your garden.
more
4
These plants will need little to no pruning or fertilizing, even during the winter months.
care_pet_and_diseases

Common Pests & Diseases

Common issues for Mother of millions based on 10 million real cases
Scars
Scars Scars Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Solutions: Each source of scarring requires a different approach to help your plant recover. Protect the trunk and leaves from physical damage like scrapes. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs. Frequent leaf or bud loss may be due to insufficient light or nutrients.
Learn More About the Scars more
Flower withering
Flower withering Flower withering Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Solutions: If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible. For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface. In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well. If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Learn More About the Flower withering more
Low light
Low light Low light Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Solutions: Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed. Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn. Introduce appropriate artificial lighting. Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Learn More About the Low light more
Brown spot
Brown spot Brown spot Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More About the Brown spot more
autodiagnose

Treat and prevent plant diseases.

AI-powered plant doctor helps you diagnose plant problems in seconds.
close
Scars
plant poor
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Symptom Analysis
Symptom Analysis
Scars form when the plant repairs wounds. They can be the result of people or pets passing by and scraping the plant. Once the underlying issue is resolved, the plant will heal but a scar may remain.
Pests and pathogens can also cause scarring. Insects may attack the plant for a meal, resulting in extensive scarring when a few invaders turn into an infestation. Diseases such as fungus and bacteria can weaken the plant, causing brown spots, mushy areas, or blisters that lead to scars.
Scars occur on stems when a leaf or bud has been lost and the plant has healed. The harder tissue is like a scab that protects a wound.
On other occasions, scars can signal problems from environmental conditions, such as overexposure to sunlight or heat. It might surprise you to know that plants can suffer from sunburn, even desert dwellers like cactus!
Solutions
Solutions
Each source of scarring requires a different approach to help your plant recover.
  1. Protect the trunk and leaves from physical damage like scrapes.
  2. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray.
  3. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs.
  4. Frequent leaf or bud loss may be due to insufficient light or nutrients.
Prevention
Prevention
Preventing some sources of scarring is easier than others, but all start with careful attention to your plants once you decide to bring them home.
  1. Review specific guidelines for your plant, including soil drainage, watering, and fertilizer requirements.
  2. Inspect plants before planting and use sterile pots and fresh potting soil or media to limit transfer of fungi or bacteria.
  3. Once established, check your plants regularly for signs of scarring or the presence of pests, as it is better to catch problems as early as possible.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
close
Flower withering
plant poor
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Overview
Overview
Flower withering occurs when flowers become weak, droopy, wilted, or faded until they can’t be revived. During withering, they begin to wrinkle and shrink until the flower becomes completely dry or dead.
Any flowers, regardless of the plant type or the climate they are grown in, are susceptible to withering. It is a worldwide problem across houseplants, herbs, flowering ornamentals, trees, shrubs, garden vegetables, and food crops.
Unlike wilting—which withering is often confused with—withering can be caused by different things and is often due to more than a lack of water. Withering can be fatal in severe cases.
Symptom Analysis
Symptom Analysis
Flower withering progresses from very mild cases to severe occurrences that kill the flower. The severity of the symptoms is related to the cause and how long the condition is allowed to progress before action is taken.
  • Wilted, droopy flowers
  • Petals and leaves begin to wrinkle
  • Brown papery streaks or spots appear on the petals and leaf tips
  • Flowerhead shrink in size
  • Petal color fades
  • Yellowing leaves
  • Complete death of the flower
Disease Cause
Disease Cause
The main causes of flower withering include natural age progress, lack of water, nutritional deficiencies, and bacterial or fungal diseases. It’s critical to determine the underlying cause when flower withering is noticed. This will guide the best course of action, if treatment is possible.
Check the soil for moisture and then closely examine the entire plant for signs of nutrient deficiencies. If neither of those appears to be the cause then cut open the stem below a flower. If a cross-section reveals brown or rust-colored stains it is safe to assume that this is a bacterial or fungal infection.
If the flower is nearing the end of its normal lifespan, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence, or cell aging and death. Cell division stops and the plant begins breaking down resources within the flower to use in other parts of the plant.
In all other cases, flower withering happens when the plant seals off the stem as a defense mechanism, stopping transport within the vascular system. This prevents further water loss through the flowers but also stops bacteria and fungi from moving to healthy parts of the plant. Once water and nutrient transport stops, the flower begins to wither and ultimately die.
Solutions
Solutions
If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface.
In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well.
If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Prevention
Prevention
This is definitely one of those instances where prevention is more effective than cure. Here are some preventative measures for avoiding premature flower withering.
  • Water plants according to their needs -- either keep the soil slightly moist or allow the top inch or two to dry out before watering again.
  • Fertilize lightly on a consistent basis, depending upon the plant’s growth. Quick-growing plants and those that flower or develop fruit will need more frequent fertilizing than slow-growing plants.
  • Purchase plants that are certified disease- or pathogen-free.
  • Look for disease-resistant cultivars.
  • Isolate plants showing disease symptoms to prevent the spread to neighboring plants.
  • Practice good plant hygiene by removing any fallen plant material as soon as possible.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
close
Low light
plant poor
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Overview
Overview
All plants require light, and if they do not receive it in the quantities that they require this distorts their growth in a process known as etiolation. In essence, etiolated plants are diverting all of their energy to growing taller in a desperate attempt to reach a position where they can meet their light requirements. Many other growth factors are harmed by this, and so light-deprived plants can become weak and distorted until they are almost unrecognizable. Low light symptoms are most commonly seen in houseplants, but outdoor specimens can also be affected.
Symptom Analysis
Symptom Analysis
Although symptoms will vary in different plants, the general symptoms of low light are easy to spot.
  1. Plant stems grow tall and lanky.
  2. There are less leaves, and both leaves and stems tend to be pale and insipid looking. This is due to a shortage of chlorophyll.
  3. All plant parts become weakened and may droop, as energy is diverted toward too-fast growth as the plant stretches itself toward any source of light.
Disease Cause
Disease Cause
Plants need sunlight in varying amounts for photosynthesis – a process that produces energy for growth and fruit and flower production. Low light causes a plant to divert all energy to upward (apical) growth in order to find better light. Plant hormones called auxins are transported from the actively-growing tip of the plant downwards, to suppress lateral growth. A drop in cellular pH triggers expansins, nonenzymatic cell wall proteins, to loosen cell walls and allow them to elongate. This elongation results in the abnormal lengthening of stems, especially internodes, or plant "legginess" which is observed in etoliated plants.
Solutions
Solutions
Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed.
  • Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn.
  • Introduce appropriate artificial lighting.
  • Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Prevention
Prevention
To avoid etiolation, provide an adequate amount of light from the beginning.
  1. Choose a location that matches each plant's ideal light needs. Many indoor plants do best in or near a south-facing window, which will provide the longest hours of sunlight. Flowering plants and those with colored leaves typically need more light than purely-green plants, as photosynthesis occurs in the green portions of leaves.
  2. Select plants with light needs that match a location's conditions. Some cultivars and varieties require less light than others.
  3. Use a grow light. Darker locations may require artificial illumination. A grow light may also become more necessary during winter, when sunlit hours are at their shortest.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
close
Brown spot
plant poor
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
  • Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
  • Placement is often random and scattered as diseases are spread through raindrops.
  • May appear on lower leaves and the interior of the plant where humidity is higher.
  • Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
  • Leaf margins may turn yellow.
  • Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
  • Blotches grow in size until the entire leaf is brown.
  • The leaf falls off the plant.
Severe Symptoms
  • Partial or complete premature defoliation
  • Reduced growth
  • Increased susceptibility to pests and other diseases
Disease Cause
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
  1. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
  2. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
  3. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
  • Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
  • Maintain good air movement between plants through proper plant spacing.
  • Increase air circulation through the center of plants through pruning.
  • Thoroughly clean all pruning tools after working with diseased plants.
  • Never dispose of disease plant material in a compost pile.
  • Avoid overhead watering to keep moisture off of the foliage.
  • Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
care_toxicity

Mother Of Millions and Their Toxicity

* The judgment on toxicity and danger is for reference only. We DO NOT GUARANTEE any accuracy of such judgment. Therefore, you SHALL NOT rely on such judgment. It is IMPORTANT TO SEEK PROFESSIONAL ADVICE in advance when necessary.
Toxic to Cats
Mother of millions is a common houseplant that is moderately to severely toxic to cats if ingested. Its toxins can affect the levels of electrolytes in the cat's heart. Symptoms can include rapid heart rate, vomiting, drooling, and dilated pupils. It can be lethal if ingested in large amounts so it's important to contact your veterinarian if you suspect your cat has eaten any part of this plant.
close
Who Is Most at Risk of Plant Poisoning?
Your pets like cats and dogs can be poisoned by them as well!
1
Do not let your lovely pets eat any parts, nor contact with the sap of toxic or unknown plants;
2
It’s better to kill those growing around your house. Wear long-sleeved shirts, pants and gloves with sharp tools to dig it out completely;
3
Clean the tools with rubbing alcohol or soap and water but do not do that with bare hands;
4
Clean your hands and skin once exposed to plants with soap and water;
5
Consider using barrier creams that contain bentoquatam to prevent poison oak, ivy and sumac rashes;
6
Dump it in special trash cans in sealed garbage packages, and do not let your pets reach it;Do not let your lovely pets eat any parts, nor contact with the sap of toxic or unknown plants;
7
If you take your pets to hike with you in the wild, please don’t let them eat any plants that you don’t know;
8
Once your pets eat, touch or inhale anything from toxic plants and act abnormally, please call the doctors for help ASAP!
pets
Pets
Some pets are less likely than children to eat and touch just about everything. This is good, as a pet owner. However, you know your pet best, and it is up to you to keep them safe. There are plenty of poisonous weeds that can grow within the confines of your lawn, which might make your dogs or cats ill or worse if they eat them. Try to have an idea of what toxic plants grow in your area and keep them under control and your pets away from them.
pets
Common Toxic Houseplants
Common Toxic Houseplants
When it comes to decorating a house, there is nothing more refreshing than adding some beautiful houseplants. Some common house plants can also be toxic.

Aloe

aloe
Aloe is famous for its sunburn-soothing properties and its gorgeous desert design. However, many people do not realize that the latex the aloe vera plant produces can be mildly toxic to pets and children.

The latex contains a chemical compound known as saponin. Which when ingested, can cause vomiting, diarrhea, and low blood sugar. This, if left unchecked, can lead to dehydration and electrolyte imbalance. The proper response is to contact poison control or a veterinarian to know what to do in your particular circumstance if either your child or pet consumes aloe.

The latex of the plant is similar to the sap of the tree. It is inside the leaf, but sticks mainly toward the edges. If aloe gel is prepared properly it should be safe for use, but be sure to apply it only topically when treating burns.

Philodendron

Philodendron
Philodendron, also known as sweetheart vine, has become a resident at many houses and even businesses. They are glossy green and the leaves elegantly split, displaying interesting designs. Behind this beauty there is a needle-like toxin called calcium oxalate crystals.

These crystals are held within the plant and only affect you, your pets, or your loved ones if the plant tissue is broken. If ingested, the crystals can cause severe swelling, difficulty breathing, stomach pain, burning and pain. If they are accidentally caught on the skin, they can cause skin irritation.

If anyone accidentally ingests philodendron and they find it difficult to breathe or their tongue starts to swell up, it is important to seek medical attention immediately to avoid suffocation. If you have very young children or pets who have a tendency to tear at plants, keep them away from any philodendrons.

Peace Lily

Peace Lily
Peace lilies produce stunningly white flowers that bring to mind peace and serenity. This is one reason they are invited into our homes and given a place to stay. However, similar to philodendrons, the peace lily contains oxalate crystals known as raphides.

The raphides, once ingested, will cause swelling and burning sensations and can also cause skin irritation. Both pets and humans can get these symptoms so it is important to keep these plants from anyone who is likely to tear or chew it. Symptoms can become dire if the raphides cause the tongue and throat to swell to a point where the person or pet is having difficulty breathing. Seek proper medical attention if this is the case.

Snake Plant

Snake Plant
The snake plant is an interesting and popular house plant. Its stark architecture and wavy coloring has made it a fan favorite. This plant too, however, is toxic when ingested or if the sap touches your skin.

Snake plant sap will cause rashes if it comes into contact with your skin. In addition, it will cause diarrhea and vomiting when ingested. Again these symptoms are very serious and would be best avoided by keeping snake plants out of reach or by choosing a different houseplant.
Common Toxic Garden Plants
Common Toxic Garden Plants

Daffodil

Daffodil
Daffodils are a strikingly colorful flower. This can sometimes bring them much attention not from just onlooking adults but children as well. Since kids are more drawn to colorful objects, they may have a higher chance of just grabbing the flower and eating it. Adults have also been known to accidentally grab daffodil bulbs instead of onions.

Why are these mistakes so dangerous? Daffodils contain lycorine, which can induce nausea, vomiting, and diarrhea. It also contains oxalates which can cause swelling and pain. The symptoms can be worse in animals, because if your pets eat daffodils they may experience drowsiness, low blood pressure or even liver damage.

Make sure to call poison control when these symptoms set in. The vomiting and diarrhea have been known to go away after 3 hours, but it is better to be safe than sorry. Ingesting liquids to keep hydration up can be important. If the patient is having difficulty breathing, seek medical attention immediately.

Hydrangea

Hydrangea
Hydrangeas are unique, with their soft blue and pink flowers. They are a great addition to any garden, but should not be snacked on—not that you would want to. Hydrangeas can be especially nasty because they contain compounds known as glycosides. These will release hydrogen cyanide into the bloodstream when consumed. This will block your body’s ability to uptake oxygen to the cells in your body.

The way to combat this kind of poisoning is through getting IVs from the vet or doctor. It is important to contact your medical professional immediately since the symptoms can be fatal within minutes or hours.

Rhododendrons

Rhododendrons
Rhododendron, the state flower of Washington, is also toxic. The multitudinous, pink flowers can be quite dangerous. All parts of this plant are toxic, the leaves and seeds more so than the flowers. However, even the nectar of the flower is toxic and in the Mediterranean, where rhododendrons grow in more dense quantities, the honey from bees who gather rhododendron nectar can be poisonous.

Normally kids and pets do not eat enough to experience the full poisoning effect. However, just eating two leaves is enough to be considered dangerous. The grayanotoxin glycosides within the rhododendron can cause vomiting, diarrhea and irregular heartbeats. Things can get very serious when too much rhododendron is consumed and can lead to necessary medical intervention.

Start by calling poison control first if you suspect anyone has been munching on rhododendrons. The experts there will be able to help guide you through the necessary processes to cure your loved one.

Rhubarb

Rhubarb
Yummy rhubarb has a nasty side to it. While the stems are used in many recipes, including for rhubarb strawberry pie, the leaves are toxic. They contain oxalic acid which is known to blister the mouth, cause nausea, vomiting, diarrhea and kidney stones. The leaves are known to be more toxic to pets than humans, but in either case, it is important to contact poison control immediately to figure out necessary steps to cure the patient.
Common Toxic Weeds in the Yard
Common Toxic Weeds in the Yard

Bittersweet Nightshade

Bittersweet Nightshade
Nightshade is an invasive, noxious weed that is extremely poisonous. It has been found along the East and West Coast of the U.S. It makes its home in areas with disturbed soil. This could be near your garden or areas that have recently had bushes/trees put in.

These plants are dark green with purple flowers that develop into bright red berries. The whole plant is toxic and should be avoided by pets and children alike. If ingested it can cause nausea, vomiting, and diarrhea. The colorful berries are especially enticing to young children. If you see any plants that look similar to tomato or pepper plants that you did not plant in your yard, it is best to just pull them immediately.

Call poison control immediately if you think someone has fallen victim to nightshade.

Buttercups

Buttercups
Buttercups are found throughout the United States, especially in wet areas. The shiny, yellow flowers will pop up in the springtime, accompanying their dandelion friends. However, unlike dandelions, buttercups are not edible.

Buttercups will release a compound called protoanemonin. This toxin is known to cause vomiting, diarrhea, bloody stool, hypersalivation, depression, blisters, and more. These symptoms will affect both humans and animals. The sap may also cause irritation when it comes into contact with skin. These yellow flowers are dangerous and children should be observed cautiously when around them.

Foxgloves

Foxgloves
Foxgloves are beautiful plants that build towers out of vivid purple bell-shaped blossoms. They are very pretty to look at, but they contain a compound known as digoxin. This chemical is used in certain medicines to help people with certain heart conditions. However, the medicine is made by specialists, whereas someone eating foxgloves will receive unregulated amounts of the chemical.

This toxin can make you vomit and lower your heartbeat. This often causes dizziness and faintness. It is extremely important to call poison control immediately to know what to do in the case of foxglove poisoning. Some people have confused the young leaves of foxglove with borage, making adult foragers at risk as well as kids and pets.
How to Tend to or Get Rid of Toxic Plants
How to Tend to or Get Rid of Toxic Plants
Now that you know where to start with toxic plant identification, let us discuss how to either tend to the poisonous plants you decide to keep or get rid of them that plague your yard.

How to Tend to Poisonous Plants

Many plants that are toxic when ingested are also skin irritants. The philodendron is a good example of this. When the sap comes into contact with skin, it can cause a rash to form. To help protect yourself when tending to toxic plants, it is important to wear some sort of gloves.
Tend
Latex gloves may be the best solution due to their disposability. Regular gloves could potentially keep the poisonous sap on their surface. If the gloves aren’t cleaned then you could accidentally touch the irritant or pass it to someone else.

In addition you will want to plan where to keep your deadly beauties. If you have a toxic indoor plant try to keep it up high or out of reach of children and pets. This will keep accidents few and far between. Another idea is keeping your plants in areas that are usually inaccessible to children or pets. Areas such as an office, study room, or guest bedroom could be good locations. If applicable, you could also set up a terrarium for your little plant baby, making it more difficult for curious hands or paws to access.
tend2
If you plan to have outdoor plants, location will be key. You will want to put plants in an area that will be inaccessible to children, pets and even wild animals. You will probably want to avoid planting the plants in the front of your house if kids walk by on a regular basis, just to be cautious. Having the plants behind a fence will be best, but use your discretion when choosing a spot.

How to Get Rid of Poisonous Plants

plants
The easiest but possibly most controversial way to get rid of poisonous plants is by using herbicides. This can be especially easy if you own a grass lawn and use an herbicide that targets broadleaf (non-grass) species. You can find many herbicides meant for yard use by simply searching the term online. Once you have purchased the herbicide you will want to make sure to follow the label posted on the container. If you follow the instructions precisely, then everything should run smoothly for you.

If you don’t plan on using herbicides, there are a few organic methods you can use to try to get rid of toxic plants. You can manually pull the plants out of the ground. This is probably one of the most difficult methods because there is no assurance that you will get the whole plant out this way.

You can also try pouring boiling hot water or spraying white vinegar on the target plants. This may take more time than using a synthetic herbicide, but you can feel a little better about using these products.

You can also try to use wood chips to cover a certain area where you do not want anything to grow. This will not stop all the weeds, but the few that make it through can be easily picked by hand.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
close
Who Is Most at Risk of Plant Poisoning?
Everyone should keep the following in mind to prevent being poisoned:
1
Do not eat any parts, nor contact with the sap of toxic or unknown plants;
2
If you need to kill it, wear long-sleeved shirts, pants and gloves with sharp tools to dig it out completely;
3
Clean the tools with rubbing alcohol or soap and water but do not do that with bare hands;
4
Clean your hands and skin once exposed to plants with soap and water;
5
Consider using barrier creams that contain bentoquatam to prevent poison oak, ivy and sumac rashes;
6
Dump it in special trash cans in sealed garbage packages;
7
Wear properly when you hiking or working in the wilderness. Long pants, long sleeves, gloves, hiking shoes, etc., that protect you from being hurt by any plants;
8
Once you or your family aren’t feeling well after eating, touching or inhaling anything from toxic plants, please call your doctor for help ASAP!
Outdoor Workers
Outdoor Workers and Recreationalists
Those who enjoy the outdoors either as a hobby or as part of their work will rarely see a plant and decide to munch on it (although the scenario is not unheard of). However, they do tend to deal with moving through and brushing aside plants. These people are more at risk of being poisoned by touching toxic plants than by ingesting them.
Outdoor Workers
Foragers
Foragers
Foraging for food and medicinal plants is a desirable skill among people who want to feel at one with the land. This hobby can be very useful and enjoyable, but if done wrong , it can lead to disastrous effects. People who forage are picking and grabbing plants with the full intention of using those plants, most of the time to ingest them.
Foragers
Children
Children
While outdoor workers are more likely to touch poison and foragers are more likely to ingest poison, children can easily do both. These bundles of joy just love to run around and explore the world. They enjoy touching things and occasionally shoving random stuff in their mouth; this is a terrible combination with toxic plants in the mix.
If you let your children run about, it is important to know what are the local toxic plants that they could accidentally get into. Try to educate the children and steer them away from where the toxic plants are located.
Children
Common Toxic Houseplants
Common Toxic Houseplants
When it comes to decorating a house, there is nothing more refreshing than adding some beautiful houseplants. Some common house plants can also be toxic.

Aloe

aloe
Aloe is famous for its sunburn-soothing properties and its gorgeous desert design. However, many people do not realize that the latex the aloe vera plant produces can be mildly toxic to pets and children.

The latex contains a chemical compound known as saponin. Which when ingested, can cause vomiting, diarrhea, and low blood sugar. This, if left unchecked, can lead to dehydration and electrolyte imbalance. The proper response is to contact poison control or a veterinarian to know what to do in your particular circumstance if either your child or pet consumes aloe.

The latex of the plant is similar to the sap of the tree. It is inside the leaf, but sticks mainly toward the edges. If aloe gel is prepared properly it should be safe for use, but be sure to apply it only topically when treating burns.

Philodendron

Philodendron
Philodendron, also known as sweetheart vine, has become a resident at many houses and even businesses. They are glossy green and the leaves elegantly split, displaying interesting designs. Behind this beauty there is a needle-like toxin called calcium oxalate crystals.

These crystals are held within the plant and only affect you, your pets, or your loved ones if the plant tissue is broken. If ingested, the crystals can cause severe swelling, difficulty breathing, stomach pain, burning and pain. If they are accidentally caught on the skin, they can cause skin irritation.

If anyone accidentally ingests philodendron and they find it difficult to breathe or their tongue starts to swell up, it is important to seek medical attention immediately to avoid suffocation. If you have very young children or pets who have a tendency to tear at plants, keep them away from any philodendrons.

Peace Lily

Peace Lily
Peace lilies produce stunningly white flowers that bring to mind peace and serenity. This is one reason they are invited into our homes and given a place to stay. However, similar to philodendrons, the peace lily contains oxalate crystals known as raphides.

The raphides, once ingested, will cause swelling and burning sensations and can also cause skin irritation. Both pets and humans can get these symptoms so it is important to keep these plants from anyone who is likely to tear or chew it. Symptoms can become dire if the raphides cause the tongue and throat to swell to a point where the person or pet is having difficulty breathing. Seek proper medical attention if this is the case.

Snake Plant

Snake Plant
The snake plant is an interesting and popular house plant. Its stark architecture and wavy coloring has made it a fan favorite. This plant too, however, is toxic when ingested or if the sap touches your skin.

Snake plant sap will cause rashes if it comes into contact with your skin. In addition, it will cause diarrhea and vomiting when ingested. Again these symptoms are very serious and would be best avoided by keeping snake plants out of reach or by choosing a different houseplant.
Common Toxic Garden Plants
Common Toxic Garden Plants

Daffodil

Daffodil
Daffodils are a strikingly colorful flower. This can sometimes bring them much attention not from just onlooking adults but children as well. Since kids are more drawn to colorful objects, they may have a higher chance of just grabbing the flower and eating it. Adults have also been known to accidentally grab daffodil bulbs instead of onions.

Why are these mistakes so dangerous? Daffodils contain lycorine, which can induce nausea, vomiting, and diarrhea. It also contains oxalates which can cause swelling and pain. The symptoms can be worse in animals, because if your pets eat daffodils they may experience drowsiness, low blood pressure or even liver damage.

Make sure to call poison control when these symptoms set in. The vomiting and diarrhea have been known to go away after 3 hours, but it is better to be safe than sorry. Ingesting liquids to keep hydration up can be important. If the patient is having difficulty breathing, seek medical attention immediately.

Hydrangea

Hydrangea
Hydrangeas are unique, with their soft blue and pink flowers. They are a great addition to any garden, but should not be snacked on—not that you would want to. Hydrangeas can be especially nasty because they contain compounds known as glycosides. These will release hydrogen cyanide into the bloodstream when consumed. This will block your body’s ability to uptake oxygen to the cells in your body.

The way to combat this kind of poisoning is through getting IVs from the vet or doctor. It is important to contact your medical professional immediately since the symptoms can be fatal within minutes or hours.

Rhododendrons

Rhododendrons
Rhododendron, the state flower of Washington, is also toxic. The multitudinous, pink flowers can be quite dangerous. All parts of this plant are toxic, the leaves and seeds more so than the flowers. However, even the nectar of the flower is toxic and in the Mediterranean, where rhododendrons grow in more dense quantities, the honey from bees who gather rhododendron nectar can be poisonous.

Normally kids and pets do not eat enough to experience the full poisoning effect. However, just eating two leaves is enough to be considered dangerous. The grayanotoxin glycosides within the rhododendron can cause vomiting, diarrhea and irregular heartbeats. Things can get very serious when too much rhododendron is consumed and can lead to necessary medical intervention.

Start by calling poison control first if you suspect anyone has been munching on rhododendrons. The experts there will be able to help guide you through the necessary processes to cure your loved one.

Rhubarb

Rhubarb
Yummy rhubarb has a nasty side to it. While the stems are used in many recipes, including for rhubarb strawberry pie, the leaves are toxic. They contain oxalic acid which is known to blister the mouth, cause nausea, vomiting, diarrhea and kidney stones. The leaves are known to be more toxic to pets than humans, but in either case, it is important to contact poison control immediately to figure out necessary steps to cure the patient.
Common Toxic Weeds in the Yard
Common Toxic Weeds in the Yard

Bittersweet Nightshade

Bittersweet Nightshade
Nightshade is an invasive, noxious weed that is extremely poisonous. It has been found along the East and West Coast of the U.S. It makes its home in areas with disturbed soil. This could be near your garden or areas that have recently had bushes/trees put in.

These plants are dark green with purple flowers that develop into bright red berries. The whole plant is toxic and should be avoided by pets and children alike. If ingested it can cause nausea, vomiting, and diarrhea. The colorful berries are especially enticing to young children. If you see any plants that look similar to tomato or pepper plants that you did not plant in your yard, it is best to just pull them immediately.

Call poison control immediately if you think someone has fallen victim to nightshade.

Buttercups

Buttercups
Buttercups are found throughout the United States, especially in wet areas. The shiny, yellow flowers will pop up in the springtime, accompanying their dandelion friends. However, unlike dandelions, buttercups are not edible.

Buttercups will release a compound called protoanemonin. This toxin is known to cause vomiting, diarrhea, bloody stool, hypersalivation, depression, blisters, and more. These symptoms will affect both humans and animals. The sap may also cause irritation when it comes into contact with skin. These yellow flowers are dangerous and children should be observed cautiously when around them.

Foxgloves

Foxgloves
Foxgloves are beautiful plants that build towers out of vivid purple bell-shaped blossoms. They are very pretty to look at, but they contain a compound known as digoxin. This chemical is used in certain medicines to help people with certain heart conditions. However, the medicine is made by specialists, whereas someone eating foxgloves will receive unregulated amounts of the chemical.

This toxin can make you vomit and lower your heartbeat. This often causes dizziness and faintness. It is extremely important to call poison control immediately to know what to do in the case of foxglove poisoning. Some people have confused the young leaves of foxglove with borage, making adult foragers at risk as well as kids and pets.
How to Tend to or Get Rid of Toxic Plants
How to Tend to or Get Rid of Toxic Plants
Now that you know where to start with toxic plant identification, let us discuss how to either tend to the poisonous plants you decide to keep or get rid of them that plague your yard.

How to Tend to Poisonous Plants

Many plants that are toxic when ingested are also skin irritants. The philodendron is a good example of this. When the sap comes into contact with skin, it can cause a rash to form. To help protect yourself when tending to toxic plants, it is important to wear some sort of gloves.
Tend
Latex gloves may be the best solution due to their disposability. Regular gloves could potentially keep the poisonous sap on their surface. If the gloves aren’t cleaned then you could accidentally touch the irritant or pass it to someone else.

In addition you will want to plan where to keep your deadly beauties. If you have a toxic indoor plant try to keep it up high or out of reach of children and pets. This will keep accidents few and far between. Another idea is keeping your plants in areas that are usually inaccessible to children or pets. Areas such as an office, study room, or guest bedroom could be good locations. If applicable, you could also set up a terrarium for your little plant baby, making it more difficult for curious hands or paws to access.
tend2
If you plan to have outdoor plants, location will be key. You will want to put plants in an area that will be inaccessible to children, pets and even wild animals. You will probably want to avoid planting the plants in the front of your house if kids walk by on a regular basis, just to be cautious. Having the plants behind a fence will be best, but use your discretion when choosing a spot.

How to Get Rid of Poisonous Plants

plants
The easiest but possibly most controversial way to get rid of poisonous plants is by using herbicides. This can be especially easy if you own a grass lawn and use an herbicide that targets broadleaf (non-grass) species. You can find many herbicides meant for yard use by simply searching the term online. Once you have purchased the herbicide you will want to make sure to follow the label posted on the container. If you follow the instructions precisely, then everything should run smoothly for you.

If you don’t plan on using herbicides, there are a few organic methods you can use to try to get rid of toxic plants. You can manually pull the plants out of the ground. This is probably one of the most difficult methods because there is no assurance that you will get the whole plant out this way.

You can also try pouring boiling hot water or spraying white vinegar on the target plants. This may take more time than using a synthetic herbicide, but you can feel a little better about using these products.

You can also try to use wood chips to cover a certain area where you do not want anything to grow. This will not stop all the weeds, but the few that make it through can be easily picked by hand.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
care_more_info

More About Mother Of Millions

Plant Type
Plant Type
Succulent, Herb
Lifespan
Lifespan
Perennial
Spread
Spread
25 cm
Bloom Time
Bloom Time
Spring, Winter
Flower Size
Flower Size
8 to 16 mm
Plant Height
Plant Height
1.5 m

Usages

Garden Use
Mother of millions is a popular container plant in cooler climates and an ornamental in tropical areas. Often growing in rock gardens, it is used to provide color from spring through summer. Its ability to spread easily from leaf buds allows the flowering succulent to be used as a self-forming ground cover, but it can also become invasive without care.
plantfinder

Find your perfect green friends.

Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
care_faq

Common Problems

Why do its leaves turn yellow and withered?

more more
It's a natural phenomenon that its old leaves turn yellow and wither. Don't be panic. If new buds turn yellow and withered, it is abnormal. It may be caused by lack of some mineral fertilizer or by sunburn.

Why do its leaves wrinkle?

more more
It's generally due to water shortage. When the succulent is lack of water, there will be wrinkles on leaves, or leaves will be shriveled, which reminds you to water them.

Why does it have a very high stem but few leaves?

more more
It is mostly due to the lack of sufficient light, which is the same principle as the growth of common mung bean sprout in Asian market. Lack of light can lead to spindling of plant internode and vulnerableness of plant tissue, which makes the plant prone to be injured. If you're in a similar situation, place the succulent in a well-lit area, and then the situation will slowly improve over time.
product icon close
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
product icon
17,000 local species +400,000 global species studied
product icon
Nearly 5 years of research
product icon
80+ scholars in botany and gardening
ad
product icon close
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
Lighting
close
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips.
Requirements
Full sun
Ideal
Above 6 hours sunlight
Partial sun
Tolerance
About 3-6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness.
Essentials
Mother of millions appreciates being bathed in generous amounts of sunshine throughout the day, although it can manage with a mixed shade and sun exposure. Its native habitat is sun-drenched, and because of this, an abundance or shortage of light may result in a lackluster or weakened plant respectively.
Preferred
Tolerable
Unsuitable
icon
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Symptoms of Insufficient Light in %s
Mother of millions is a beloved choice for indoor gardening, and they require strong light to thrive. However, when placed in rooms with suboptimal lighting, they may develop symptoms of light deficiency.
View more
(Symptom details and solutions)
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Leggy or sparse growth
The spaces between leaves or stems of your mother of millions may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Symptoms of Excessive light in %s
Mother of millions require strong light to thrive, and some are remarkably resilient to sun exposure, rarely suffering from sunburn.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover care info about seasonal tips, plant diseases, and more?
Temperature
close
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips.
Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care.
Essentials
As a mother of millions native to warm climates, it thrives in temperatures ranging from 68 to 100 ℉ (20 to 38 ℃). During winter months, it's important to keep the plant away from drafts and colder temperatures to prevent damage. In summer, it can tolerate slightly higher temperatures, but it's best to avoid exposing it to direct sunlight during midday heat.
Regional wintering strategies
Winter is the growing season for Mother of millions, so it is important to maintain temperatures above {Suitable_growth_temperature_min} for optimal growth. When the outdoor temperature drops below {Tolerable_growing_temperature_min}, it is advisable to bring the plant indoors to a well-lit area. Increase watering when the temperature is higher and reduce watering when it approaches {Tolerable_growing_temperature_min}. If overwintering the plant outdoors, it should be placed in a sheltered area with ample sunlight. Consider setting up a temporary greenhouse for protection if the outdoor temperature is consistently low and keep the plant adequately moist.
Important Symptoms
Symptoms of Low Temperature in %s
Mother of millions is not tolerant of extremely cold temperatures. It thrives best when the temperature is between {Suitable_growth_temperature_min} and {Suitable_growth_temperature_max}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, the leaves will exhibit water-soaked necrosis and wilting. In cases of mild frost damage, there may not be any initial symptoms, but after a week, the leaves will significantly wilt and eventually fall off.
Solutions
Trim off the frostbitten areas. Immediately move indoors to a warm environment or set up a makeshift greenhouse for cold protection. When placing the plant indoors, choose a location near a south-facing window to ensure ample sunlight. When using a makeshift greenhouse, pay attention to ventilation to avoid plant decay due to poor airflow.
Symptoms of High Temperature in %s
During summer, Mother of millions should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the plant will enter a dormant state, and it becomes more prone to rot in high humidity conditions.
Solutions
Remove the dry and rotten parts. Move the plant to a partially shaded area, providing protection from direct sunlight during midday and afternoon. Stop watering the plant until the weather becomes cooler.
Discover care info about seasonal tips, plant diseases, and more?
Transplant
close
How to Successfully Transplant Mother Of Millions?
The perfect time to transplant mother of millions is during the early to mid-spring, as warmer temperatures promote root growth. Choose a location with well-draining soil and bright, indirect sunlight. If needed, gently loosen the roots before placing in the new site for a seamless transition.
What Preparations are Needed Before Transplanting Mother Of Millions?
What is the Ideal Time for Transplanting Mother Of Millions?
Transferring mother of millions in the nascent to peak spring period allows optimal growth. This time offers a great start for the plant because of the ideal temperature and moisture conditions. You're giving mother of millions a headstart, ensuring it thrives, demonstrating the value of timely transplantation. Remember, proper pre-transplant care is key to seamless growth.
How Much Space Should You Leave Between Mother Of Millions Plants?
When transplanting mother of millions, aim to space them about 8-12 inches (20-30 cm) apart. This spacing will give the plants enough room to establish strong root systems and allow for optimal growth.
What is the Best Soil Mix for Mother Of Millions Transplanting?
Before transplanting mother of millions, prepare the soil with a well-draining mix, such as a blend of potting soil, coarse sand, and perlite. A slow-release granular fertilizer can also be added to provide essential nutrients.
Where Should You Relocate Your Mother Of Millions?
Choose a location where mother of millions will receive plenty of bright but indirect sunlight, as this plant enjoys dappled sun throughout the day. A spot with morning sun and afternoon shade is perfect for mother of millions's growth.
What Equipments Should You Prepare Before Transplantation Mother Of Millions?
Gardening Gloves
To protect your hands while working with the soil and mother of millions.
Shovel or Spade
To dig around and under mother of millions during removal from its original location.
Garden Trowel
For use in digging the new hole for mother of millions and filling in with soil after transplanting.
Garden Hose or Watering Can
To moisten the soil and mother of millions before and after transplantation.
Gardening Fork
To carefully loosen the soil if mother of millions is in a pot or seedling tray.
Wheelbarrow or Sturdy Container
To transport mother of millions from its original location to the new transplanting site safely.
How Do You Remove Mother Of Millions from the Soil?
From Ground: Initially, water mother of millions to dampen the soil slightly which will make it easier to remove. Subsequently, use a shovel or spade to dig a wide circle around the plant, keeping the root ball intact. Gently work the spade underneath the root ball to lift mother of millions from its original location, ensuring not to damage the roots.
From Pot: If mother of millions is potted, firstly water the plant. Then, using a gardening fork, carefully loosen the soil around the edges of the pot. Gently tip the pot sideways, holding mother of millions at the base, and ease it out. Avoid tugging or pulling harshly on the plant.
From Seedling Tray: Water the seedlings first. Then carefully separate mother of millions from other seedlings by using a small tool like a popsicle stick or a thin trowel. Support the seedling by the root ball (not the stem) when lifting it from the tray.
Step-by-Step Guide for Transplanting Mother Of Millions
Preparation
Start by digging a wide and deep enough hole to accommodate the root ball of mother of millions. The hole should be twice the width and the same depth as the root ball of mother of millions. Make sure not to dig too deep as the top of the root ball should be level with the ground.
Placing the Plant
Place mother of millions gently into the hole making sure it is in an upright position. The top of the root ball should match the ground level.
Back-Filling
Start back-filling the hole with the soil removed earlier, firming the soil around mother of millions as you go to eliminate any air pockets. Continue until the hole is filled and the base of mother of millions is secure.
Watering
Thoroughly water mother of millions until the ground is saturated. This will help the roots to settle in their new environment.
How Do You Care For Mother Of Millions After Transplanting?
Regular Check
For the first few weeks after transplanting mother of millions, check regularly to ensure that the plant is not under stress. Look out for signs of wilting, discoloration, or stunted growth.
Over-Watering
Be cautious not to over-water mother of millions. The soil should be kept slightly moist, but not waterlogged.
Pruning
Pruning may be required if mother of millions shows signs of stress such as browning or dying leaves. Pruning these parts will help the plant save energy for new growth and reduce the risk of disease.
Protection
Protect mother of millions from extreme weather conditions such as frost or strong wind. Temporary covers or windbreaks can be helpful.
Patience
Remember, it can take some time for mother of millions to establish in its new location and start growing vigorously. Be patient and give your plant the care it needs.
Troubleshooting Common Issues with Mother Of Millions Transplantation.
When would be an ideal time to overseed mother of millions?
The perfect time for overseeding mother of millions is the turn of early to mid-spring.
How distant should my mother of millions be from each other when transplanting?
You should offer mother of millions about 8-12 inches (20-30 cm) of space each to flourish.
Why isn't my transplanted mother of millions thriving in its new pot?
Possible reasons could be insufficient light, incorrect water quantities, or a change in temperature. Mother of millions prefers bright, indirect light and consistent temperatures.
What type of soil mix should I use when repotting mother of millions?
Mother of millions prefers a soil that drains well. Use sandy soil with a bit of peat moss or other organic matter.
Should I water my mother of millions immediately after transplanting?
Wait a few days after transplanting before watering mother of millions to lessen the risk of root rot.
What are some signs of successful transplantation in mother of millions?
Signs of successful transplantation include new leaf growth and a healthy root system. Also, the plant should stand upright without support.
I've transplanted mother of millions recently, but the leaves are turning yellow. What might be the reason?
Yellowing leaves may suggest overwatering. Ensure the soil is well-draining and only water when the topsoil feels dry to touch.
Do roots need trimming when repotting mother of millions?
If the roots of mother of millions are overly tangled or browning, carefully trim them before repotting.
How deep should the new pot be to transplant mother of millions properly?
The pot should be deep enough to allow mother of millions's roots to spread out. Aim for a pot that's twice as deep as the root's length.
Can I use a fertilizer during the transplanting process of mother of millions?
Yes, but it's advised to wait a few weeks after transplanting. Opt for a balanced, water-soluble fertilizer.
Discover care info about seasonal tips, plant diseases, and more?
Cookie Management Tool
In addition to managing cookies through your browser or device, you can change your cookie settings below.
Necessary Cookies
Necessary cookies enable core functionality. The website cannot function properly without these cookies, and can only be disabled by changing your browser preferences.
Analytical Cookies
Analytical cookies help us to improve our application/website by collecting and reporting information on its usage.
Cookie Name Source Purpose Lifespan
_ga Google Analytics These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here. 1 Year
_pta PictureThis Analytics We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience. 1 Year
Cookie Name
_ga
Source
Google Analytics
Purpose
These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here.
Lifespan
1 Year

Cookie Name
_pta
Source
PictureThis Analytics
Purpose
We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience.
Lifespan
1 Year
Marketing Cookies
Marketing cookies are used by advertising companies to serve ads that are relevant to your interests.
Cookie Name Source Purpose Lifespan
_fbp Facebook Pixel A conversion pixel tracking that we use for retargeting campaigns. Learn more here. 1 Year
_adj Adjust This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here. 1 Year
Cookie Name
_fbp
Source
Facebook Pixel
Purpose
A conversion pixel tracking that we use for retargeting campaigns. Learn more here.
Lifespan
1 Year

Cookie Name
_adj
Source
Adjust
Purpose
This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here.
Lifespan
1 Year
This page looks better in the app
Open