About
Advanced Care
More About How-Tos
Seasonal Tips
Pests & Diseases
More Info
New Plant Care
Related Plants
How to Care for Texas Ranger
Leucophyllum frutescens or texas ranger is used often as an ornamental plant as it is fairly easy to grow. While it is sometimes known as Texas sage, it is not an actual sage as it belongs to the barometer bush genus (Leucophyllum).
Symbolism
Health, protection, weather divination
Water
Every 1-2 weeks
Sunlight
Full sun
Advanced Care Guide
Transplanting
Potting Suggestions
Transplant texas ranger ideally during early-to-late spring or late fall-to-early winter, as these ensure optimal root growth. Choose a sunny location with well-draining soil. For a thriving transplant, water consistently and avoid disturbing the roots when necessary.
Needs excellent drainage in pots.
More About How-Tos
Explore 6 of plant how-tos on Water, Lighting, Temperature, Transplant, Pollination, etc.
Water
Every 1-2 weeks
Lighting
Full sun
Texas ranger's development flourishes under a lavish amount of solar exposure, yet it can also withstand a moderately luminous environment. Excessive shadowing hinders growth and may lead to frail, unhealthy plants. Originating from an environment where it receives substantial sun, individual stages of progress remain unaffected by variations in light.
Temperature
-5 41 ℃
The native growth environment of texas ranger requires temperatures ranging from 15 to 35 ℃ (59 to 95 ℉) for optimal growth. It prefers warmer temperatures and can handle temperatures as high as 40 ℃ (104 ℉) in the summer. In the winter, it can tolerate temperatures as low as 5 ℃ (41 ℉). To keep the plant healthy during the winter, it is recommended to provide frost protection and avoid watering during colder months.
Transplant
4-6 feet
Transplant texas ranger ideally during early-to-late spring or late fall-to-early winter, as these ensure optimal root growth. Choose a sunny location with well-draining soil. For a thriving transplant, water consistently and avoid disturbing the roots when necessary.
Pollination
Normal
The captivating texas ranger enchants bees as its primary pollinators. Its vibrant blossoms secrete nectar; a sweet elixir irresistible to these tiny creatures. Their diligent dance between blooms helps transfer pollen, confirming the texas ranger's reliance on bee-assisted, or 'entomophilous', pollination. This orchestrated event usually happens during late summer, when the texas ranger flowers are most abundant, ensuring a successful pollination season.
Overwinter
15 ℃
Texas ranger thrives in desert-like conditions, naturally adapting to winter by going dormant and requiring little water. Gardeners should reduce watering further, protecting roots from potential frost. Shielding from direct winter sunlight might also keep the silvery foliage vibrant. Given texas ranger's Southwest U.S. origins, it's well-adapted to dry, cool winters. But in lower temperature regions, remember: less is more when it comes to water and warmth!
Seasonal Care Tips
Spring
Summer
Fall
Winter
This plant and other temperate flowering trees, vines, and shrubs often benefit from early spring care.
1
Spring care includes pruning to remove dead branches. Be careful not to cut away any buds, it will reduce flowering.
2
Apply a balanced, all-purpose fertilizer to support healthy growth.
3
Pay attention to soil moisture levels, and water whenever the top layer of soil is beginning to dry out.
4
Ensure container plants are receiving enough sunlight. Move the plants to a location receiving around six hours of sunlight a day.
Temperate flowering trees, vines, and shrubs like this plant require more care in the summer.
1
Frequent watering in the summer is a must in most climates, especially in the south. Check the soil’s moisture levels daily, watering when it is beginning to dry out.
2
Stop fertilizing in the summer while the plant is not in bloom.
3
summer is the ideal time to remove any spent blooms to encourage re-flowering in the fall.
4
Move container plants out of the bright sunlight.
5
Keep an eye out for pests and diseases. Removing plant debris from the area can help with any potential issues.
Your plant needs a bit of care in the autumn months to keep it looking its best and prepare it for winter.
1
In the late fall, you can give your plant a good prune. Remove any low-hanging or overcrowding branches, along with energy-sapping suckers, to keep the plant growing strong throughout the season.
2
Clean up any fallen leaves around the plant, as these leaves can cause harmful bacteria to grow around the plant.
3
Provide it with enough water to keep the soil moist, watering whenever the soil becomes dry.
4
Make sure it's exposed to strong sunlight and has some shade in the afternoon.
5
Watch out for any pests and diseases, such as mildew that looks like a powdery coating on the plant.
This plant requires some careful care during the winter.
1
It's important for your plant to be exposed to cold winter weather during this season, which will help boost its production in the spring, in a process sometimes called “chilling” your plant. Therefore, don't worry about keeping these plants warm or bringing them inside.
2
You may want to take this dormant time to prune away overcrowding, dead, or diseased parts, however.
Common Pests & Diseases
Common issues for Texas ranger based on 10 million real cases
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Solutions: If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Solutions: If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible. For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface. In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well. If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Solutions: There are several easy ways to remedy the nutrient deficiencies in soils. Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies. Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy. Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly. Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Underwatering
Leaves may wilt for a variety of reasons.
Solutions: The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with. Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock. In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Overview
Regardless of the type of plant or where it is grown, at some point, it will begin to aged yellow and dry. This is a natural, unavoidable process that happens when the plant has completed all of the steps in its life.
Annual plants go through this process at the end of a single growing season. Perennial plants live for multiple years, if not tens or hundreds of years, but will still ultimately exhibit these symptoms.
Symptom Analysis
When plants have progressed through their natural developmental stages and are nearing the end of their lifecycle, they begin showing signs of decline. Leaves will start to yellow and droop, and over time they turn papery brown and dry.
Once completely dry, the leaves begin to fall from the plant until the entire plant has dried out.
Disease Cause
At the end of its life, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence or natural aging and death. Cell division stops, and the plant begins catabolizing resources to use in other parts of the plant.
As this happens, the tissues begin yellow and drying until the entire plant is desiccated and perishes.
Solutions
If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Prevention
Unfortunately, there is no way to prevent plants from dying of “old age.” To help prolong their life, and put off symptoms of aged yellow and dry for as long as possible, take care of them by giving them enough water, fertilizing them appropriately, and making sure they get enough sunlight.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Overview
Flower withering occurs when flowers become weak, droopy, wilted, or faded until they can’t be revived. During withering, they begin to wrinkle and shrink until the flower becomes completely dry or dead.
Any flowers, regardless of the plant type or the climate they are grown in, are susceptible to withering. It is a worldwide problem across houseplants, herbs, flowering ornamentals, trees, shrubs, garden vegetables, and food crops.
Unlike wilting—which withering is often confused with—withering can be caused by different things and is often due to more than a lack of water. Withering can be fatal in severe cases.
Symptom Analysis
Flower withering progresses from very mild cases to severe occurrences that kill the flower. The severity of the symptoms is related to the cause and how long the condition is allowed to progress before action is taken.
- Wilted, droopy flowers
- Petals and leaves begin to wrinkle
- Brown papery streaks or spots appear on the petals and leaf tips
- Flowerhead shrink in size
- Petal color fades
- Yellowing leaves
- Complete death of the flower
Disease Cause
The main causes of flower withering include natural age progress, lack of water, nutritional deficiencies, and bacterial or fungal diseases. It’s critical to determine the underlying cause when flower withering is noticed. This will guide the best course of action, if treatment is possible.
Check the soil for moisture and then closely examine the entire plant for signs of nutrient deficiencies. If neither of those appears to be the cause then cut open the stem below a flower. If a cross-section reveals brown or rust-colored stains it is safe to assume that this is a bacterial or fungal infection.
If the flower is nearing the end of its normal lifespan, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence, or cell aging and death. Cell division stops and the plant begins breaking down resources within the flower to use in other parts of the plant.
In all other cases, flower withering happens when the plant seals off the stem as a defense mechanism, stopping transport within the vascular system. This prevents further water loss through the flowers but also stops bacteria and fungi from moving to healthy parts of the plant. Once water and nutrient transport stops, the flower begins to wither and ultimately die.
Solutions
If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface.
In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well.
If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Prevention
This is definitely one of those instances where prevention is more effective than cure. Here are some preventative measures for avoiding premature flower withering.
- Water plants according to their needs -- either keep the soil slightly moist or allow the top inch or two to dry out before watering again.
- Fertilize lightly on a consistent basis, depending upon the plant’s growth. Quick-growing plants and those that flower or develop fruit will need more frequent fertilizing than slow-growing plants.
- Purchase plants that are certified disease- or pathogen-free.
- Look for disease-resistant cultivars.
- Isolate plants showing disease symptoms to prevent the spread to neighboring plants.
- Practice good plant hygiene by removing any fallen plant material as soon as possible.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Overview
Nutrient deficiencies can be seen in many different ways on plants. Basically, the lack of nutrients will inhibit plant growth, produce weak stems and leaves, and leave plants open to infection from pests and diseases. Plants use the nutrients from the soil to help them with photosynthesis. This, in turn, produces healthy plant growth. Plants that lack adequate amounts of nutrients will look lackluster and unhealthy. Eventually, if this is not addressed, it will cause the plants to die. The most important nutrients that plants need are nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur. Additionally, plants require small amounts of micronutrients such as iron, boron, manganese, zinc, copper, and molybdenum.
Symptom Analysis
A common sign that plants are experiencing nutrient deficiencies is the yellowing of leaves. This may be an overall yellowing or leaves that are yellow but still have green veins. These leaves will eventually brown off and die.
Another sign is the loss of plant vigor. The plants may not be growing as well as they should or their growth may be stunted.
Below are some common symptoms that appear when plants are lacking in nutrients.
Nitrogen (N): Inner, older leaves yellow first. If the deficiency is severe, yellowing progresses outward to newer growth.
Potassium (K): Leaf edges may turn brown and crinkly, with a yellowing layer forming just inside of the edge. Older leaves tend to be impacted first.
Phosphorus (P): Lack of vigorous growth. Plants will appear stunted.
Zinc (Zn): Yellowing tends to occur first at the base of the leaf.
Copper (Cu): Newer leaves begin to yellow first, with older leaves yellowing only if the deficiency becomes severe.
Boron (B): Newer leaves are impacted first. Foliage may also become particularly brittle in cases of boron deficiency.
Disease Cause
There are several factors that can lead to nutrient deficiencies, a situation where plants are not receiving the nutrients that they need. This could be because they are planted in nutrient-deficient soils, or that the soil's pH is too high or low. Incorrect soil pH can lock up certain nutrients, thus making them unavailable to plants. Lack of soil moisture can also be a problem, because plants need water to be able to absorb the nutrients from the soil.
Solutions
There are several easy ways to remedy the nutrient deficiencies in soils.
- Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies.
- Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy.
- Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly.
- Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Prevention
There are several easy ways to prevent nutrient deficiencies in plants.
- Regular fertilizing. Regular addition of fertilizer to the soil is one of the simplest and most effective ways to prevent deficiencies.
- Proper watering. Both over and under watering can adversely impact a plant's roots, which in turn makes it harder for them to properly take up nutrients.
- Testing the soil's pH. A soil's acidity or alkalinity will impact the degree to which certain nutrients are available to be taken up by plants. Knowing the soil's pH means it can be amended to suit the needs of the individual plants.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Underwatering
Leaves may wilt for a variety of reasons.
Overview
Underwatering plants is one of the quickest ways to kill them. This is something that most gardeners are well aware of. Unfortunately, knowing exactly how much water a plant needs can be tricky, especially considering that underwatering and overwatering present similar symptoms in plants.
Therefore, it’s important to be vigilant and attentive to each plants’ individual needs.
Symptom Analysis
As mentioned earlier, overwatering and underwatering present similar symptoms in plants. These symptoms include poor growth, wilted leaves, defoliation, and brown leaf tips or margins. Ultimately, both underwatering and overwatering can lead to the death of a plant.
The easiest way to determine whether a plant has too much water or too little is to look at the leaves. If underwatering is the culprit, the leaves will look brown and crunchy, while if it’s overwatering, they will appear yellow or a pale green in color.
When this issue first begins, there may be no noticeable symptoms at all, particularly in hardy or drought-tolerant plants. However, they will begin to wilt once they start suffering from a lack of water. The edges of the plant’s leaves will become brown or curled. Soil pulling away from the edges of the planter is a telltale sign, or a crispy, brittle stem.
Prolonged underwatering can cause a plant’s growth to become stunted. The leaves might drop and the plant can be more susceptible to pest infestations, too.
Disease Cause
Underwatering is caused by, quite simply, not watering plants often or deeply enough. There is a heightened risk of underwatering if any of these situations apply:
- Extreme heat and dry weather (when growing outdoors)
- Grow lights or indoor lighting that is too bright or intense for the type of plant
- Using fast-draining growing media such as sand
Solutions
The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with.
Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock.
In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Prevention
Always check the soil before watering. If the top inch of soil feels moist, though not wet, the watering is perfect. If it’s dry, water it immediately. If it feels soggy, you avoid watering until it dries out a bit more.
Also, make sure the lighting is sufficient for the species. Plants grow faster and need more water when there is intense light or lots of heat. Being aware of these conditions and modifying them, if possible, is a good way to prevent underwatering. Many container plants are potted in soil mixtures mean to be well-draining. Adding materials that retain moisture, like compost or peat moss, can also prevent these symptoms.
Other tips to prevent underwatering include:
- Choose pots with adequately-sized drainage holes
- Avoid warm temperatures
- Use large pots with additional soil (these take longer to dry out)
- Avoid terracotta pots, which lose water quickly
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
More About Texas Ranger
Plant Type
Shrub
Lifespan
Perennial
Spread
1.2 to 1.8 m
Bloom Time
Summer
Flower Color
Purple
Pink
Lavender
Leaf Color
Green
Silver
Gray
Flower Size
2.5 cm
Plant Height
1.5 to 2.5 m
Name story
Texas sage
Although it may be called sage, it is not really a plant from the Salvia genus. Its purple flowers and silver-green leaves make it an excellent plant for any scenic landscapes. Furthermore, it's called Texas sage because it's native to Texas. It's also called the barometer plant locally because the shrub will bloom once it starts to get humid after a long drought.
Usages
Garden Use
Texas ranger is a wild flowering shrub that has great ornamental appeal with its gray-green leaves and abundant flowers. The plant's dense growth makes it a good choice for hedging, but it is showy enough to be grown as a standalone specimen. Texas ranger makes a great addition to a Mediterranean garden but also does well in containers. It grows well with other dry climate plants like agaves and yuccas.
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Caring for a New Plant
The following pictures and instructions for woody plant are aimed to help your plants adapt and thrive in a new environment.
1
Picking a Healthy Woody Plant
Check Its Health
Whole Plant
Symmetrical crown, evenly distributed branches, full and compact shape, no excessive growth, close internodes, and uniform leaf size.
Branches
The branches are not withered, and the trunk is free of boreholes or damage.
Leaves
Check the inside of the plant, shaded and overlapping areas, back of leaves. Even colour, no yellowing, no brown spots, no crawling insects, no cobwebs, no deformities, no wilting.
Stems
No mold, browning or soft rot at the base of the plant.
Health Troubleshooting
Whole Plant ![trouble-image]()
![more]()
1 Asymmetrical crown or missing, uneven branching: prune the weak and slender branches of the larger portion of the asymmetrical crown. ![trouble-image]()
![more]()
2 Internodes are longer in the upper part, leaves are sparse and smaller on top: increase light intensity or duration.
1 Asymmetrical crown or missing, uneven branching: prune the weak and slender branches of the larger portion of the asymmetrical crown. 
2 Internodes are longer in the upper part, leaves are sparse and smaller on top: increase light intensity or duration. Branches ![trouble-image]()
![more]()
1 Dry branches: check if the branch is still alive by peeling back a small section of bark and trim away any dry branches. Watch out for signs of insect infestation inside the branch. ![trouble-image]()
![more]()
2 Bark with holes: inject insecticide into the holes and apply systemic insecticide to the roots. ![trouble-image]()
![more]()
3 Damaged bark: brush on a wound-healing agent, and avoid getting it wet.
1 Dry branches: check if the branch is still alive by peeling back a small section of bark and trim away any dry branches. Watch out for signs of insect infestation inside the branch. 
2 Bark with holes: inject insecticide into the holes and apply systemic insecticide to the roots. 
3 Damaged bark: brush on a wound-healing agent, and avoid getting it wet. Stems ![trouble-image]()
Mildew, browning, or soft rot at the base: place the plant in a ventilated, dry environment and water with fungicide.
Leaves ![trouble-image]()
![more]()
1 Uneven leaf color and yellowing: prune yellow leaves and check if there are signs of rot at the base of the plant. Spray with fungicide for severe cases. ![trouble-image]()
![more]()
2 Brown spots or small yellow spots: place the plant in a ventilated area and avoid watering the leaves. Spray with fungicide for severe cases. ![trouble-image]()
![more]()
3 Tiny crawling insects on the back of leaves or spider webs between leaves: increase light exposure and spray with insecticide for severe cases. ![trouble-image]()
![more]()
4 Deformations or missing parts on leaves: determine if it's physical damage or pest infestation. Linear or tearing damage is physical, while the rest are pests. Spray with insecticide. ![trouble-image]()
![more]()
5 Wilting leaves: provide partial shade and avoid excessive sun exposure. Remove 1/3 to 1/2 of the leaves for severe cases.
1 Uneven leaf color and yellowing: prune yellow leaves and check if there are signs of rot at the base of the plant. Spray with fungicide for severe cases. 
2 Brown spots or small yellow spots: place the plant in a ventilated area and avoid watering the leaves. Spray with fungicide for severe cases. 
3 Tiny crawling insects on the back of leaves or spider webs between leaves: increase light exposure and spray with insecticide for severe cases. 
4 Deformations or missing parts on leaves: determine if it's physical damage or pest infestation. Linear or tearing damage is physical, while the rest are pests. Spray with insecticide. 
5 Wilting leaves: provide partial shade and avoid excessive sun exposure. Remove 1/3 to 1/2 of the leaves for severe cases. Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Check Its Growing Conditions
Soil Check
Soil should smell fresh like after a rain and no musty odor.
Light Check
Check the light requirement of the plant and if it match with planting location.
Temperature Check
Check if the current outdoor temperature is too low or too high.
Condition Troubleshooting
Soil
Potting mix soil, Peat moss mix soil
Soil smells musty or foul: check the root system for decay, place the plant in a ventilated, dry environment, and water with fungicide.
Ideal Temperature
0℃ to 35℃
Outdoor temperature is not suitable for the plant: wait until it's a more favorable temperature for growth.
Suitable Light
Full sun, Partial sun
Insufficient light: Lack of light can result in fewer leaves and branches, and prevent flowering. Move plant to sunnier spot if possible.
Transplant recovery: After 3 days without severe wilting, slowly increase light to normal levels over a week. If plant droops or sheds leaves, keep it in shade. Once wilting stops, give shade until the plant stands up again. Lots of yellowing and leaf loss mean the light is too low and needs to be increased.
2
Adapting Your New Woody Plant
Step 1
Repotting
Plant your plant promptly in its final location or in a new pot, if conditions are suitable. When transplanting, clean the roots of the plant and keep the root system intact. Prune any blackened or rotten roots, spread out a heavily tangled root system, and mix in some well-rotted organic fertilizer. Use permeable soil and water thoroughly after planting.
show more ![show-more]()
Step 2
Pruning
Remove yellow or diseased leaves immediately. If leaves are crowded and appear wilted or falling off, remove some of them. For bare-root plants, cut off at least half of the leaves. Pruning is not typically required.
show more ![show-more]()
Step 3
Watering
Increase watering in the first week to keep soil moist. Water when soil is slightly dry, for at least 2 weeks. Avoid over-watering. Do not water when there is water on your fingers after touching the soil.
show more ![show-more]()
Step 4
Fertilizing
Add a small amount of base fertilizer during transplanting or repotting. No other fertilizer needed for the first month.
show more ![show-more]()
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Texas Ranger
Repotting
Plant promptly in final location or new pot. Clean roots, use organic fertilizer, permeable soil, and water thoroughly.
Pruning
Cut off yellow or diseased leaves and crowded leaves that appear wilted or falling.
Watering
Water new plants more often for 2 weeks. Avoid over/under watering by checking the soil.
Fertilizing
Add base fertilizer during transplanting. No other fertilizer is needed for the first month.
Sunlight
Regular sun exposure for indoor plants. Shade after transplanting/repotting, then gradually increase light if there is no wilting. Increase light if yellowing and leaf drop occur.
Save and print our adaptation tips card for quick and easy reference.
Download Texas Ranger
Repotting
Plant promptly in final location or new pot. Clean roots, use organic fertilizer, permeable soil, and water thoroughly.
Pruning
Cut off yellow or diseased leaves and crowded leaves that appear wilted or falling.
Watering
Water new plants more often for 2 weeks. Avoid over/under watering by checking the soil.
Fertilizing
Add base fertilizer during transplanting. No other fertilizer is needed for the first month.
Sunlight
Regular sun exposure for indoor plants. Shade after transplanting/repotting, then gradually increase light if there is no wilting. Increase light if yellowing and leaf drop occur.
Plants with Same Care Needs
Pokeweed
Although its berries look juicy and tempting, the fruits and the root of pokeweed are toxic and should not be eaten. Pokeweed is considered a pest species by farmers but is nevertheless often grown as an ornamental plant. Its berries can be made into pokeberry ink as well.
Bloom Time
Summer
Golden pothos
The golden pothos (Epipremnum aureum) is a popular houseplant that is commonly seen in Australia, Asia, and the West Indies. It goes by many nicknames, including "devil's ivy", because it is so hard to kill and can even grow in low light conditions. Golden pothos has poisonous sap, so it should be kept away from pets and children.
Bigleaf hydrangea
The bigleaf hydrangea is a deciduous shrub native to Japan, and is known for its lush, oval, colorful inflorescence. The two types of Hydrangea macrophylla are mopheads - with large, ball-shaped, sterile flower clusters, and lace capes - with small round fertile flowers in the center, and sterile flowers on the outer side of each inflorescence. Depending on soil pH, blooms can change color from pink to blue.
Bloom Time
Summer
Song of india
The song of india has distinctive leaves that stay green year-round. The plant's unique appearance and low-maintenance nature make it popular as a houseplant. The song of india is native to Indian Ocean islands including Madagascar, though not, oddly, to India itself.
Bloom Time
Summer
August lily
The trademark feature of Asia-native plantain lilies is the numerous glossy oval leaves with deep parallel veins. The august lily is additionally decorated with strongly fragrant, trumpet-shaped, large white flowers, which are unique in the genus. Hosta plantaginea is one of the favorite cultivated plants for north-facing and shady gardens, but it also tolerates high humidity and temperatures.
Bloom Time
Summer
Tomato
Solanum lycopersicum is an annual or perennial herbaceous vine native to Central and South America that produces a large, juicy, edible fruit known as tomato. Today there are over 10000 cultivated varieties. Although tomato is the world’s most popular vegetable, botanically it is a fruit.
Bloom Time
Summer
View More Plants
Botanist in your pocket
App
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
Botanist in your pocket
Scan QR code to download
About
Advanced Care
More About How-Tos
Seasonal Tips
Pests & Diseases
More Info
New Plant Care
How to Care for Texas Ranger
Leucophyllum frutescens or texas ranger is used often as an ornamental plant as it is fairly easy to grow. While it is sometimes known as Texas sage, it is not an actual sage as it belongs to the barometer bush genus (Leucophyllum).
Symbolism
Health, protection, weather divination
Every 1-2 weeks
Water ![Water detail]()
Full sun
Sunlight ![Sunlight detail]()
Advanced Care Guide
Transplanting
Potting Suggestions
Transplant texas ranger ideally during early-to-late spring or late fall-to-early winter, as these ensure optimal root growth. Choose a sunny location with well-draining soil. For a thriving transplant, water consistently and avoid disturbing the roots when necessary.
Needs excellent drainage in pots.
Seasonal Care Tips
Spring
Summer
Fall
Winter
This plant and other temperate flowering trees, vines, and shrubs often benefit from early spring care.
1
Spring care includes pruning to remove dead branches. Be careful not to cut away any buds, it will reduce flowering.
2
Apply a balanced, all-purpose fertilizer to support healthy growth.
3
Pay attention to soil moisture levels, and water whenever the top layer of soil is beginning to dry out.
4
Ensure container plants are receiving enough sunlight. Move the plants to a location receiving around six hours of sunlight a day.
Temperate flowering trees, vines, and shrubs like this plant require more care in the summer.
1
Frequent watering in the summer is a must in most climates, especially in the south. Check the soil’s moisture levels daily, watering when it is beginning to dry out.
2
Stop fertilizing in the summer while the plant is not in bloom.
3
summer is the ideal time to remove any spent blooms to encourage re-flowering in the fall.
4
Move container plants out of the bright sunlight.
5
Keep an eye out for pests and diseases. Removing plant debris from the area can help with any potential issues.
Your plant needs a bit of care in the autumn months to keep it looking its best and prepare it for winter.
1
In the late fall, you can give your plant a good prune. Remove any low-hanging or overcrowding branches, along with energy-sapping suckers, to keep the plant growing strong throughout the season.
2
Clean up any fallen leaves around the plant, as these leaves can cause harmful bacteria to grow around the plant.
3
Provide it with enough water to keep the soil moist, watering whenever the soil becomes dry.
4
Make sure it's exposed to strong sunlight and has some shade in the afternoon.
5
Watch out for any pests and diseases, such as mildew that looks like a powdery coating on the plant.
This plant requires some careful care during the winter.
1
It's important for your plant to be exposed to cold winter weather during this season, which will help boost its production in the spring, in a process sometimes called “chilling” your plant. Therefore, don't worry about keeping these plants warm or bringing them inside.
2
You may want to take this dormant time to prune away overcrowding, dead, or diseased parts, however.
Common Pests & Diseases
Common issues for Texas ranger based on 10 million real cases
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Solutions: If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Learn More ![more]()
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Solutions: If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible. For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface. In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well. If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Learn More ![more]()
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Solutions: There are several easy ways to remedy the nutrient deficiencies in soils. Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies. Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy. Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly. Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Learn More ![more]()
Underwatering
Leaves may wilt for a variety of reasons.
Solutions: The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with. Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock. In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Learn More ![more]()
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Overview
Regardless of the type of plant or where it is grown, at some point, it will begin to aged yellow and dry. This is a natural, unavoidable process that happens when the plant has completed all of the steps in its life.
Annual plants go through this process at the end of a single growing season. Perennial plants live for multiple years, if not tens or hundreds of years, but will still ultimately exhibit these symptoms.
Symptom Analysis
When plants have progressed through their natural developmental stages and are nearing the end of their lifecycle, they begin showing signs of decline. Leaves will start to yellow and droop, and over time they turn papery brown and dry.
Once completely dry, the leaves begin to fall from the plant until the entire plant has dried out.
Disease Cause
At the end of its life, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence or natural aging and death. Cell division stops, and the plant begins catabolizing resources to use in other parts of the plant.
As this happens, the tissues begin yellow and drying until the entire plant is desiccated and perishes.
Solutions
If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Prevention
Unfortunately, there is no way to prevent plants from dying of “old age.” To help prolong their life, and put off symptoms of aged yellow and dry for as long as possible, take care of them by giving them enough water, fertilizing them appropriately, and making sure they get enough sunlight.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Overview
Flower withering occurs when flowers become weak, droopy, wilted, or faded until they can’t be revived. During withering, they begin to wrinkle and shrink until the flower becomes completely dry or dead.
Any flowers, regardless of the plant type or the climate they are grown in, are susceptible to withering. It is a worldwide problem across houseplants, herbs, flowering ornamentals, trees, shrubs, garden vegetables, and food crops.
Unlike wilting—which withering is often confused with—withering can be caused by different things and is often due to more than a lack of water. Withering can be fatal in severe cases.
Symptom Analysis
Flower withering progresses from very mild cases to severe occurrences that kill the flower. The severity of the symptoms is related to the cause and how long the condition is allowed to progress before action is taken.
- Wilted, droopy flowers
- Petals and leaves begin to wrinkle
- Brown papery streaks or spots appear on the petals and leaf tips
- Flowerhead shrink in size
- Petal color fades
- Yellowing leaves
- Complete death of the flower
Disease Cause
The main causes of flower withering include natural age progress, lack of water, nutritional deficiencies, and bacterial or fungal diseases. It’s critical to determine the underlying cause when flower withering is noticed. This will guide the best course of action, if treatment is possible.
Check the soil for moisture and then closely examine the entire plant for signs of nutrient deficiencies. If neither of those appears to be the cause then cut open the stem below a flower. If a cross-section reveals brown or rust-colored stains it is safe to assume that this is a bacterial or fungal infection.
If the flower is nearing the end of its normal lifespan, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence, or cell aging and death. Cell division stops and the plant begins breaking down resources within the flower to use in other parts of the plant.
In all other cases, flower withering happens when the plant seals off the stem as a defense mechanism, stopping transport within the vascular system. This prevents further water loss through the flowers but also stops bacteria and fungi from moving to healthy parts of the plant. Once water and nutrient transport stops, the flower begins to wither and ultimately die.
Solutions
If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface.
In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well.
If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Prevention
This is definitely one of those instances where prevention is more effective than cure. Here are some preventative measures for avoiding premature flower withering.
- Water plants according to their needs -- either keep the soil slightly moist or allow the top inch or two to dry out before watering again.
- Fertilize lightly on a consistent basis, depending upon the plant’s growth. Quick-growing plants and those that flower or develop fruit will need more frequent fertilizing than slow-growing plants.
- Purchase plants that are certified disease- or pathogen-free.
- Look for disease-resistant cultivars.
- Isolate plants showing disease symptoms to prevent the spread to neighboring plants.
- Practice good plant hygiene by removing any fallen plant material as soon as possible.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Overview
Nutrient deficiencies can be seen in many different ways on plants. Basically, the lack of nutrients will inhibit plant growth, produce weak stems and leaves, and leave plants open to infection from pests and diseases. Plants use the nutrients from the soil to help them with photosynthesis. This, in turn, produces healthy plant growth. Plants that lack adequate amounts of nutrients will look lackluster and unhealthy. Eventually, if this is not addressed, it will cause the plants to die. The most important nutrients that plants need are nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur. Additionally, plants require small amounts of micronutrients such as iron, boron, manganese, zinc, copper, and molybdenum.
Symptom Analysis
A common sign that plants are experiencing nutrient deficiencies is the yellowing of leaves. This may be an overall yellowing or leaves that are yellow but still have green veins. These leaves will eventually brown off and die.
Another sign is the loss of plant vigor. The plants may not be growing as well as they should or their growth may be stunted.
Below are some common symptoms that appear when plants are lacking in nutrients.
Nitrogen (N): Inner, older leaves yellow first. If the deficiency is severe, yellowing progresses outward to newer growth.
Potassium (K): Leaf edges may turn brown and crinkly, with a yellowing layer forming just inside of the edge. Older leaves tend to be impacted first.
Phosphorus (P): Lack of vigorous growth. Plants will appear stunted.
Zinc (Zn): Yellowing tends to occur first at the base of the leaf.
Copper (Cu): Newer leaves begin to yellow first, with older leaves yellowing only if the deficiency becomes severe.
Boron (B): Newer leaves are impacted first. Foliage may also become particularly brittle in cases of boron deficiency.
Disease Cause
There are several factors that can lead to nutrient deficiencies, a situation where plants are not receiving the nutrients that they need. This could be because they are planted in nutrient-deficient soils, or that the soil's pH is too high or low. Incorrect soil pH can lock up certain nutrients, thus making them unavailable to plants. Lack of soil moisture can also be a problem, because plants need water to be able to absorb the nutrients from the soil.
Solutions
There are several easy ways to remedy the nutrient deficiencies in soils.
- Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies.
- Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy.
- Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly.
- Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Prevention
There are several easy ways to prevent nutrient deficiencies in plants.
- Regular fertilizing. Regular addition of fertilizer to the soil is one of the simplest and most effective ways to prevent deficiencies.
- Proper watering. Both over and under watering can adversely impact a plant's roots, which in turn makes it harder for them to properly take up nutrients.
- Testing the soil's pH. A soil's acidity or alkalinity will impact the degree to which certain nutrients are available to be taken up by plants. Knowing the soil's pH means it can be amended to suit the needs of the individual plants.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Underwatering
Leaves may wilt for a variety of reasons.
Overview
Underwatering plants is one of the quickest ways to kill them. This is something that most gardeners are well aware of. Unfortunately, knowing exactly how much water a plant needs can be tricky, especially considering that underwatering and overwatering present similar symptoms in plants.
Therefore, it’s important to be vigilant and attentive to each plants’ individual needs.
Symptom Analysis
As mentioned earlier, overwatering and underwatering present similar symptoms in plants. These symptoms include poor growth, wilted leaves, defoliation, and brown leaf tips or margins. Ultimately, both underwatering and overwatering can lead to the death of a plant.
The easiest way to determine whether a plant has too much water or too little is to look at the leaves. If underwatering is the culprit, the leaves will look brown and crunchy, while if it’s overwatering, they will appear yellow or a pale green in color.
When this issue first begins, there may be no noticeable symptoms at all, particularly in hardy or drought-tolerant plants. However, they will begin to wilt once they start suffering from a lack of water. The edges of the plant’s leaves will become brown or curled. Soil pulling away from the edges of the planter is a telltale sign, or a crispy, brittle stem.
Prolonged underwatering can cause a plant’s growth to become stunted. The leaves might drop and the plant can be more susceptible to pest infestations, too.
Disease Cause
Underwatering is caused by, quite simply, not watering plants often or deeply enough. There is a heightened risk of underwatering if any of these situations apply:
- Extreme heat and dry weather (when growing outdoors)
- Grow lights or indoor lighting that is too bright or intense for the type of plant
- Using fast-draining growing media such as sand
Solutions
The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with.
Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock.
In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Prevention
Always check the soil before watering. If the top inch of soil feels moist, though not wet, the watering is perfect. If it’s dry, water it immediately. If it feels soggy, you avoid watering until it dries out a bit more.
Also, make sure the lighting is sufficient for the species. Plants grow faster and need more water when there is intense light or lots of heat. Being aware of these conditions and modifying them, if possible, is a good way to prevent underwatering. Many container plants are potted in soil mixtures mean to be well-draining. Adding materials that retain moisture, like compost or peat moss, can also prevent these symptoms.
Other tips to prevent underwatering include:
- Choose pots with adequately-sized drainage holes
- Avoid warm temperatures
- Use large pots with additional soil (these take longer to dry out)
- Avoid terracotta pots, which lose water quickly
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
More About Texas Ranger
Plant Type
Shrub
Lifespan
Perennial
Spread
1.2 to 1.8 m
Bloom Time
Summer
Flower Color
Purple
Pink
Lavender
Leaf Color
Green
Silver
Gray
Flower Size
2.5 cm
Plant Height
1.5 to 2.5 m
Name story
Texas sage
Although it may be called sage, it is not really a plant from the Salvia genus. Its purple flowers and silver-green leaves make it an excellent plant for any scenic landscapes. Furthermore, it's called Texas sage because it's native to Texas. It's also called the barometer plant locally because the shrub will bloom once it starts to get humid after a long drought.
Usages
Garden Use
Texas ranger is a wild flowering shrub that has great ornamental appeal with its gray-green leaves and abundant flowers. The plant's dense growth makes it a good choice for hedging, but it is showy enough to be grown as a standalone specimen. Texas ranger makes a great addition to a Mediterranean garden but also does well in containers. It grows well with other dry climate plants like agaves and yuccas.
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Caring for a New Plant
The following pictures and instructions for woody plant are aimed to help your plants adapt and thrive in a new environment.
1
Picking a Healthy Woody Plant
Check Its Health
Whole Plant
Symmetrical crown, evenly distributed branches, full and compact shape, no excessive growth, close internodes, and uniform leaf size.
Branches
The branches are not withered, and the trunk is free of boreholes or damage.
Leaves
Check the inside of the plant, shaded and overlapping areas, back of leaves. Even colour, no yellowing, no brown spots, no crawling insects, no cobwebs, no deformities, no wilting.
Stems
No mold, browning or soft rot at the base of the plant.
Health Troubleshooting
Whole Plant
Branches
Stems
Leaves
1 Asymmetrical crown or missing, uneven branching: prune the weak and slender branches of the larger portion of the asymmetrical crown. 
2 Internodes are longer in the upper part, leaves are sparse and smaller on top: increase light intensity or duration. 
1 Dry branches: check if the branch is still alive by peeling back a small section of bark and trim away any dry branches. Watch out for signs of insect infestation inside the branch. 
2 Bark with holes: inject insecticide into the holes and apply systemic insecticide to the roots. 
3 Damaged bark: brush on a wound-healing agent, and avoid getting it wet. 
Mildew, browning, or soft rot at the base: place the plant in a ventilated, dry environment and water with fungicide.
1 Uneven leaf color and yellowing: prune yellow leaves and check if there are signs of rot at the base of the plant. Spray with fungicide for severe cases. 
2 Brown spots or small yellow spots: place the plant in a ventilated area and avoid watering the leaves. Spray with fungicide for severe cases. 
3 Tiny crawling insects on the back of leaves or spider webs between leaves: increase light exposure and spray with insecticide for severe cases. 
4 Deformations or missing parts on leaves: determine if it's physical damage or pest infestation. Linear or tearing damage is physical, while the rest are pests. Spray with insecticide. 
5 Wilting leaves: provide partial shade and avoid excessive sun exposure. Remove 1/3 to 1/2 of the leaves for severe cases. Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Check Its Growing Conditions
Soil Check
Soil should smell fresh like after a rain and no musty odor.
Light Check
Check the light requirement of the plant and if it match with planting location.
Temperature Check
Check if the current outdoor temperature is too low or too high.
Condition Troubleshooting
Soil
Ideal Temperature
Suitable Light
Potting mix soil, Peat moss mix soil
Soil
Soil smells musty or foul: check the root system for decay, place the plant in a ventilated, dry environment, and water with fungicide.
0℃ to 35℃
Ideal Temperature
Outdoor temperature is not suitable for the plant: wait until it's a more favorable temperature for growth.
Full sun, Partial sun
Suitable Light
Insufficient light: Lack of light can result in fewer leaves and branches, and prevent flowering. Move plant to sunnier spot if possible.
Transplant recovery: After 3 days without severe wilting, slowly increase light to normal levels over a week. If plant droops or sheds leaves, keep it in shade. Once wilting stops, give shade until the plant stands up again. Lots of yellowing and leaf loss mean the light is too low and needs to be increased.
2
Adapting Your New Woody Plant
Step 1
Repotting
Plant your plant promptly in its final location or in a new pot, if conditions are suitable. When transplanting, clean the roots of the plant and keep the root system intact. Prune any blackened or rotten roots, spread out a heavily tangled root system, and mix in some well-rotted organic fertilizer. Use permeable soil and water thoroughly after planting.
Step 2
Pruning
Remove yellow or diseased leaves immediately. If leaves are crowded and appear wilted or falling off, remove some of them. For bare-root plants, cut off at least half of the leaves. Pruning is not typically required.
Step 3
Watering
Increase watering in the first week to keep soil moist. Water when soil is slightly dry, for at least 2 weeks. Avoid over-watering. Do not water when there is water on your fingers after touching the soil.
Step 4
Fertilizing
Add a small amount of base fertilizer during transplanting or repotting. No other fertilizer needed for the first month.
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Sign in/sign up
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Water
How Often Should I Water Texas Ranger?
Every 1-2 weeks
Watering Frequency
Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App
Just like people, each plant has its own preferences and needs. Devote time to understanding your plants so you can nurture them properly. Observe your plants attentively, learning from their growth patterns, and becoming more in tune with their needs as you grow together. Keep a watchful eye on new plants and seedlings, as they are sensitive to both overwatering and underwatering. Shower them with gentle love and attention, fostering their growth and strength. Let the rhythm of your local climate guide your watering habits, adapting your schedule to the changing weather and the needs of your plants. Important Symptoms
Overwatering
Texas ranger is more susceptible to developing disease symptoms when overwatered because it prefers a soil environment with moderate humidity. Symptoms of overwatering include yellowing leaves, root rot, leaf drop...
View more
(Symptom details and solutions)
Yellowing leaves
When plants receive too much water, the roots become oxygen deprived and the bottom leaves of the plant gradually turn yellow.
Root rot
Excess water in the soil can lead to the growth of harmful fungi and bacteria, causing the roots to rot and eventually kill the plant.
Leaf drop
When plants are overwatered, they may shed their leaves as a response to stress, even if the leaves appear green and healthy.
Mold and mildew
Overwatered plants create a damp environment that can encourage the growth of mold and mildew on soil.
Increased susceptibility diseases
Overwatering plants may become more susceptible and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Adjust watering frequency based on seasons and soil dryness. Wait for soil to dry before watering.2. Increase soil aeration by loosening surface and gently stirring with a wooden stick or chopstick.3. Optimize environment with good ventilation and warmth to enhance water evaporation and prevent overwatering.
Underwatering
Texas ranger is more susceptible to plant health issues when lacking watering, as it can only tolerate short periods of drought. Symptoms of dehydration include wilting, yellowing leaves, leaf drop...
View more
(Symptom details and solutions)
Wilting
Due to the dry soil and insufficient water absorption by the roots, the leaves of the plant will appear limp, droopy, and lose vitality.
Root damage
Prolonged underwatering can cause root damage, making it difficult for the plant to absorb water even when it is available.
Dry stems
Due to insufficient water, plant stems may become dry or brittle, making the branches easy to break.
Dying plant
If underwatering continues for an extended period, the plant may ultimately die as a result of severe water stress and an inability to carry out essential functions.
Solutions
1. Thoroughly saturate soil with slow ring watering to ensure uniform and sufficient moisture for plants. 2. Increase air humidity with water trays or misting to slow leaf water evaporation. 3. Watering according to the recommended frequency.Adjust watering frequency based on seasons and soil dryness.
Discover care info about seasonal tips, plant diseases, and more?
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Full sun
Ideal
Above 6 hours sunlight
Partial sun
Tolerance
About 3-6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
Texas ranger's development flourishes under a lavish amount of solar exposure, yet it can also withstand a moderately luminous environment. Excessive shadowing hinders growth and may lead to frail, unhealthy plants. Originating from an environment where it receives substantial sun, individual stages of progress remain unaffected by variations in light.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Texas ranger thrives in full sunlight but is sensitive to heat. As a plant commonly grown outdoors with abundant sunlight, it may exhibit subtle symptoms of light deficiency when placed in rooms with suboptimal lighting.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your texas ranger may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
Texas ranger enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Texas ranger thrives in full sun exposure but is sensitive to heat. Although sunburn symptoms occasionally occur, they are unable to withstand intense sunlight in high-temperature environments.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover care info about seasonal tips, plant diseases, and more?
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
The native growth environment of texas ranger requires temperatures ranging from 15 to 35 ℃ (59 to 95 ℉) for optimal growth. It prefers warmer temperatures and can handle temperatures as high as 40 ℃ (104 ℉) in the summer. In the winter, it can tolerate temperatures as low as 5 ℃ (41 ℉). To keep the plant healthy during the winter, it is recommended to provide frost protection and avoid watering during colder months.
Regional wintering strategies
Texas ranger has some cold tolerance and generally does not require any additional measures when the temperature is above {Tolerable_growing_temperature_min}. However, if the temperature is expected to drop below {Tolerable_growing_temperature_min}, it is necessary to take some temporary measures for cold protection, such as wrapping the plant with plastic film, fabric, or other materials. Once the temperature rises again, the protective measures should be removed promptly.
Important Symptoms
Low Temperature
Texas ranger has moderate tolerance to low temperatures and thrives best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, the leaves may start to droop. In mild cases, they can recover, but in severe cases, the leaves will wilt and eventually fall off.
Solutions
Trim off the frost-damaged parts. Prior to encountering low temperatures again, wrap the plant with materials such as non-woven fabric or cloth, and construct a wind barrier to protect it from the cold wind.
High Temperature
During summer, Texas ranger should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the color of the leaves becomes lighter, the leaf tips may become dry and withered, the leaves may curl, and the plant becomes more susceptible to sunburn.
Solutions
Trim away the sunburned and dried-up parts. Move the plant to a location that provides shade from the midday and afternoon sun, or use a shade cloth to create shade. Water the plant in the morning and evening to keep the soil moist.
Discover care info about seasonal tips, plant diseases, and more?
Transplant
How to Successfully Transplant Texas Ranger?
Transplant texas ranger ideally during early-to-late spring or late fall-to-early winter, as these ensure optimal root growth. Choose a sunny location with well-draining soil. For a thriving transplant, water consistently and avoid disturbing the roots when necessary.
What Preparations are Needed Before Transplanting Texas Ranger?
What is the Ideal Time for Transplanting Texas Ranger?
Ideally, transplant your texas ranger either from early dew-kissed spring till the lush late spring, or between the serene late fall and frost-kissed early winter. This timing allows the plant to establish its roots in moderate temperatures offering the advantage of minimizing transplant shock. With my friendly advice, your texas ranger will thrive when carefully transplanted in these seasons.
How Much Space Should You Leave Between Texas Ranger Plants?
To give your texas ranger enough space to grow, it's ideal to maintain a distance of 4-6 feet (1.2-1.8 meters) between each plant. This will ensure they have ample room to thrive and spread their beautiful foliage.
What is the Best Soil Mix for Texas Ranger Transplanting?
For a successful transplant, prepare your soil by making it well-draining and add a base of organic compost or slow-release fertilizer to provide essential nutrients. Texas ranger can tolerate a variety of soil types, including clay, loam, and sandy soils.
Where Should You Relocate Your Texas Ranger?
An important aspect of transplanting your texas ranger is finding the right sunlight exposure. Make sure to pick a location that receives full sun to partial shade, meaning at least 6 hours of direct sunlight per day for optimal growth.
What Equipments Should You Prepare Before Transplantation Texas Ranger?
Gardening Gloves
To protect your hands while working with plant and soil.
Shovel or Spade
Necessary for digging the plant from its original location and making a hole in the new transplanting spot.
Trowel
Useful for fine adjustments when placing texas ranger into its new hole.
Garden Rake
To smooth the soil surface over the plant.
Watering Can
For watering texas ranger before, during, and after transplanting process.
Mulch
Helps retains moisture and prevents weed growth.
Stakes/ties
To provide support to the plant if required.
How Do You Remove Texas Ranger from the Soil?
Step1 Preparation
Once texas ranger plant is safely removed from its original location, prepare the new planting area. The hole should be twice as wide and as deep as the root ball of the plant.
Step2 Placement
Gently place the texas ranger plant in the hole. The top of the root ball should be level with the soil surface. Adjust the soil underneath if necessary to ensure proper plant height.
Step3 Soil Refill
Start refilling the hole with soil, firming it gently around the root ball. Try to keep the plant upright and make sure it's not planted too deep.
Step4 Water
Water thoroughly immediately after planting.
Step5 Mulching
Spread a layer of mulch around the base of the plant but avoid covering the stem.
Step6 Staking
If texas ranger requires support, stake the plant gently but avoid harming the roots or stem.
Step-by-Step Guide for Transplanting Texas Ranger
Step1 Preparation
Once texas ranger plant is safely removed from its original location, prepare the new planting area. The hole should be twice as wide and as deep as the root ball of the plant.
Step2 Placement
Gently place the texas ranger plant in the hole. The top of the root ball should be level with the soil surface. Adjust the soil underneath if necessary to ensure proper plant height.
Step3 Soil Refill
Start refilling the hole with soil, firming it gently around the root ball. Try to keep the plant upright and make sure it's not planted too deep.
Step4 Water
Water thoroughly immediately after planting.
Step5 Mulching
Spread a layer of mulch around the base of the plant but avoid covering the stem.
Step6 Staking
If texas ranger requires support, stake the plant gently but avoid harming the roots or stem.
How Do You Care For Texas Ranger After Transplanting?
Watering
Ensure that texas ranger receives regular and deep watering, especially during dry periods. Don't let the soil around the plant dry out completely.
Pruning
Encourage bushier growth by pinching off the tips of the branches during the first few months after transplanting.
Avoid Fertilizing
Wait for texas ranger to establish in its new location before adding any fertilizer. Monitor the plant's condition and growth.
Troubleshooting Common Issues with Texas Ranger Transplantation.
Which is the best time of the year to transplant texas ranger?
The ideal time for transplanting texas ranger is from the onset of spring (March-May) to early winter (October-December).
How much space does texas ranger require between plants for optimum growth?
Leave a generous distance of about 4 to 6 feet (approximately 1.2 to 1.8 meters) between each texas ranger for best results.
What type of soil does texas ranger prefer when transplanting?
Texas ranger isn't picky about soil. It thrives in any well-drained soil, but prefers slightly acidic to neutral pH levels.
What are the watering instructions post-transplanting for texas ranger?
Water texas ranger thoroughly after transplanting, then let the soil partially dry before watering again. Overwatering can lead to root rot.
How frequently should I inspect my transplanted texas ranger?
Inspect your texas ranger weekly in the first few months after transplanting. Monitor for pests and signs of diseases or stress.
Are there any special care instructions for texas ranger after it's transplanted?
Trim texas ranger sparingly. It's a naturally compact plant. Over-trimming can discourage blooming and will reduce its unique natural form.
What do I do if the new growth on my transplanted texas ranger is wilting or yellowing?
If new growth is yellowish or wilting, it might signal too much water. Allow the soils to dry out between watering sessions.
How quickly should texas ranger start to grow after transplanting?
Typically, texas ranger shows signs of new growth within 2-3 weeks of transplanting. Be patient and provide necessary care.
Should I stake texas ranger after transplanting to help it establish?
Texas ranger is a fairly sturdy plant, so staking isn't usually necessary. However, if the plant appears unstable, consider light staking for support.
What depth should I plant texas ranger when transplanting?
When transplanting, plant texas ranger at the same depth as it was in its previous pot. Deeper planting can lead to rot.
Discover care info about seasonal tips, plant diseases, and more?
