Overwatering is all too easy with the Formosa lily. It doesn’t require a lot of water in the first place and overwatering can lead to bulb rot. Some symptoms include:

-Mushy bulb

-Spotted, flopping stems

-Droopy flowers

-Yellowed stalk

It is normal for yellow leaves to develop when Formosa lily has reached the end of their blooming period. However, if the leaves turn yellow before the flowers have bloomed, it is a sign of over watering.

Bulb rot is common and cannot be reversed, unfortunately. If you catch it early on, you will need to dig up the bulb and carefully remove the rotten portions. From there, you should remove all the soil that the plant grew in. If you use a pot, thoroughly disinfect it and any tools you use to avoid spreading the fungus. For outdoor plants, you should plant them in a different location.

There’s not as much of an issue if you underwater this plant. Of course, you don’t want the soil to dry out entirely, but it’s much easier to solve an underwatering problem than an overwatering one. Some signs that your plant is underwatered include:

-No blooms

-Sagging, wizened stalks

-Browning around the edges of the flower petals

If you have given your Formosa lily too little water, then do not panic. It has a level of drought tolerance. Once you have realised, give it a good drink but do not saturate the surrounding soil. Just make sure it is moist.But do not give them too much and overwater them, you just need to let the soil to be mosit. Extended periods in water can lead to root rot and fungus growing on the bulb. The fungus can cause serious damage to the bulb which is noticed through spots that appear on the leaves and buds. The tips of the leaves may also discolor and die.

Formosa lily is fairly hardy and doesn’t need a ton of attention. While you can grow it in a pot, it does the best grown directly into the ground in the hottest/brightest part of your garden. Since this is a bulb plant, you’ll need to be extra careful about overwatering while the plant is growing as it will rot the bulb. Once you have planted your Formosa lily, water them well once and then leave them. That initial watering will kick start their growth, but after that you can leave them be until you see shoots appear.

For the best results, you’ll want to check the moisture of the soil after the growth of new leaves. Put your finger about an 2-3 inch below the surface of the soil. If it’s still wet, you don’t have to water the plant. For potted plants, you should also check the water collection train to see if there’s any standing water. If there is, you should avoid watering the plant. For a more accurate moisture reading, stick a moisture sensor about 2-3 inches into the soil. The reading should be in the middle of the ‘moist’ category. The recommended frequency of watering your Formosa lily is once per week.

The Formosa lily is a hardy plant and can survive a variety of harsh conditions. If you plant outdoors, you can usually get away with letting mother nature take the reins. It doesn’t require much in the way of water maintenance and can survive long periods of drought. You should just make sure that the soil you plant it in provides adequate drainage.

When it comes to potted Formosa lily, you need to be a bit more careful with your watering. Since this is a bulb plant, it is prone to bulb rot if it is overwatered. You can get away with watering your plant less inside. And, of course, make sure your pots have proper drainage holes! Use good quality, well-drained soil. Add some sand or rocks to increase drainage.

The most you’ll be watering the Formosa lily is during its growing phase. You should water about one inch per week to encourage the flowers to bloom. Withhold water until the stalk appears and then begin watering as normal.

Of course, how much you water during the growing phase also depends on the overall humidity and temperature. If you live in a hot, dry climate, the water will evaporate faster so you might need to water your Formosa lily more often. If you’re in a more humid climate, you can probably water your Formosa lily less. Always check the soil moisture level to make sure it’s not too wet. These plants prefer well-drained, moist soil.

Fertilization is important to the Formosa lily for several general reasons. Mainly, fertilization helps Formosa lily and other plants by providing key nutrients that help the plant grow both above and below ground. However, the overall fertilization needs for a Formosa lily are relatively low.

At times, a Formosa lily may survive well without fertilization. However, annual fertilization is can be very beneficial to the Formosa lily, as it will help keep the plant alive and may also encourage your Formosa lily to create better flowers that last for longer. As such, those interested in helping their Formosa lily look its best should keep up with annual fertilization.

The ideal time to fertilize a Formosa lily is in the late winter to early spring. During that time, your Formosa lily will be exiting its dormant phase and entering a phase of active growth. Fertilization at this time allows the plant to get off to a great start for the season by encouraging healthy growth.

While it is generally most advantageous to fertilize a Formosa lily during the early spring, it is also permissible to fertilize a Formosa lily during the fall too. However, summer and winter remain the seasons in which it is not a good idea to feed a Formosa lily.

You should not fertilize your Formosa lily during any time of the year except during the late winter and early spring. The low fertilization needs of this plant allow a single annual feeding to suffice. Continuing to fertilize throughout spring, summer, and fall can easily lead to overfertilization and all of the complications that can come with it. The only exception is if you did not fertilize in spring, which means that it is permissible to feed this plant in fall.

Along with refraining from fertilizing for most of the growing season, there is also no reason to fertilize this plant during the winter. In winter, the Formosa lily will be in a dormant growth phase, meaning that it does not put forth new growth. With that being the case, fertilization during most of the winter is not advisable.

Nearly any kind of general-purpose fertilizer with a balanced amount of the three main plant nutrients will work well for a Formosa lily. However, there are a few specific nutrient blends that can be even more beneficial. For instance, many gardeners follow the belief that higher volumes of phosphorus make for stronger roots and better flowers. Since Formosa lily is a flowering plant, applying a phosphorus-rich fertilizer may be the best approach.

You can use a fertilizer that comes in a granular form or a liquid form as long as there are plenty of nutrients present. Outside of manufactured fertilizers, you can also use more organic means to improve the soil for your Formosa lily. Mainly, compost, manure, and similar materials can go a long way towards creating a healthy growing medium for your Formosa lily.

The most common way to fertilize a Formosa lily is to apply a granular or pellet fertilizer to the soil around your plant. Remember that the ideal time to fertilize is as the plant is exiting its winter dormant growth phase and entering a phase of active growth. In early spring, wait until the plant begins to send shoots through the soil, and then apply your fertilizer.

Some people may choose to use a liquid fertilizer instead of a granular one. In that case, you should dilute the fertilizer with water before applying it. Regardless of whether you use granular or liquid fertilizer, it is always best to moisten the soil before, during, and after you apply fertilizer.

As you care for your Formosa lily, recall that this plant does not need a lot of fertilizer each year and will begin to suffer if it receives too much. Firstly, any overfertilized plant runs the risk of fertilizer burn, a condition in which excessive amounts of fertilizer draw nutrients and moisture out of the plant's roots, causing its decline.

Also, overfertilizing a Formosa lily is also a way of weakening your plant and making disease far more likely. There is also a potential that overfertilization could cause your Formosa lily to flower less or not at all, which is a significant detriment considering the blooms of this plant are what make it so valuable and sought after by so many gardeners.

Formosa lily needs full sun every day, and these plants rely on a minimum of six hours of sunlight to keep their leaves, roots, and blooms in a healthy state. Even though most perennials need six hours of sunlight a day, plants like the Orange Daylily or Giant Coreopsis could live off less sun for a minimum of three hours daily. Even though these perennial flowering plants can live with only three hours of direct sunlight, they won't be able to thrive like they would in sunnier conditions.

The few Perennial Flowering Plants that don't like excessive heat in warm climates might react poorly to too much sun if they have heat damage. These plants may wilt or dry out from too much sun and may also develop growth issues if they're regularly in the sun during the most intense heat of the day. Some plants don't need protection from the light afternoon sun, but those that are harmed by intense afternoon exposure should be provided some shade in warmer climates. Gardeners could give these plants plenty of shade by planting them in spots that don't receive direct heat during the afternoon, like under trees or behind bushes.

While many perennial plants need plenty of sun to bloom to their fullest extent, some of them benefit from less sun in warmer climates. For example, people who live in hotter climates might want to provide shade for their flowering perennials in the hot afternoon sun, and this is even more true for months in the summer.

Even though some perennial flowering plants will benefit from partially shaded in the hottest climates, plants like the Giant Coreopsis aren't intimidated by too much sun. They might sit outside in the full sun in hot weather and still thrive.

If you're growing Formosa lily and you aren't getting enough sunlight, you'll notice signs of inadequate requirements in your plants. Most plants won't produce as many blooms as they would if they had full sun exposure. Some plants will develop dry spots on their leaves, but most of these plants will still bloom in the inadequate sun. Even though they bloom, the flowers will be smaller and less full.

Formosa lily is great flowers in gardens and will have optimum blooming if it gets six hours of sunlight a day minimum. Sometimes, flowers stay fresh longer if they're partially shaded during the really hot parts of the day. When Formosa lily is young, gardeners want to ensure their younger plants are getting plenty of sunlight but don't have to endure intense heat during the afternoon sunlight. If you have a fully mature plant, provide it with plenty of sun so it may keep up its growth properly.

Formosa lily will need a minimum of six hours of light to best support their photosynthesis cycles. These flowering plants need the sun to help their foliage and blooms grow. However, certain perennial flowering plants like the Giant Coreopsis might need anywhere from eight to twelve hours of full sun a day to maintain their large flowers and healthy foliage.

If you want your Formosa lily to grow healthy and bloom as much as possible during its blooming season, you should try to give your plant six hours of direct sunlight. Some perennial plants might even do more sunlight and could sit in the sun for up to twelve hours, depending on the heat in the area and the general environment. Plants like the Red Hot Poker and Giant Coreopsis thrive in much hotter climates and might sit in all types of strong sunlight.

Some home gardeners have to use grow lights because their spaces don't allow for tons of outdoor sunlight. Most perennials could grow happily in grow lights, but they will need anywhere from eight to fourteen hours of artificial light to stay strong since these lights don't have as much power as the sun.

Far from damaging the plant, regular pruning will actually encourage Formosa lily to produce more blooms. There are two primary forms of pruning for Formosa lily. The first is deadheading, which is the gardening term for removing spent flower heads once they start to wither. This concentrates the nutrients for the other flowers and allows the plant to flower better. The final process for pruning Formosa lily is the removal of yellow and diseased leaves, which increases plant ventilation and light penetration and facilitates plant growth. When nature runs its course, Formosa lily will bloom once, produce seed heads, and attempt to reproduce for the rest of the year. But, by consistently removing flower heads before they go to seed, you encourage the plant to continue producing more blooms for a longer flowering time. When the plant starts to wilt during the full, you should cut off the wilted part above the soil as well.

There are two primary forms of pruning for Formosa lily. The first is deadheading, which is the gardening term for removing spent flower heads once they start to wither. This concentrates the nutrients for the other flowers and allows the plant to flower better. The final process for pruning Formosa lily is the removal of yellow and diseased leaves, which increases plant ventilation and light penetration and facilitates plant growth. Since Formosa lily requires two types of pruning, you’ll be trimming your plants throughout the growing season. Pinching is most effective in the early spring before the plant develops any flower buds. Removal of yellowing or diseased leaves can be done at any time during the growing season. When nature runs its course, Formosa lily will bloom once, produce seed heads, and attempt to reproduce for the rest of the year. But, by consistently removing flower heads before they go to seed, you encourage the plant to continue producing more blooms for a longer flowering time. Finally, deadheading takes place as soon as the plants are producing full flower heads. Expect to take off spent blossoms from mid-summer through the first frosts of fall. When the plant starts to wilt during the full, you should cut off the wilted part above the soil as well.

Formosa lily doesn’t take much special equipment for pruning. A basic pair of scissors or garden shears should do the trick. It’s a good idea to ensure they are clean before use—you can soak them for thirty minutes in a solution of one part bleach diluted in nine parts water. This reduces the risk of spreading disease lingering on contaminated equipment into your flower garden. Some gardeners avoid using tools altogether and merely pinch off the blossoms with their fingertips. That can be a faster technique, but you run a larger risk of bruising the plant stems or accidentally pulling them out of the ground completely.

Here’s an overview of pruning instructions for Formosa lily based on which of the two types you’re completing. By completing these two types of pruning over the lifespan of your Formosa lily, you’ll encourage them to produce bigger, better flowers for far longer than the plants would otherwise. It only takes a few minutes to complete each step of the pruning process, and you’ll reap the rewards of your efforts for weeks to come. Deadheading Deadheading is a fast, easy way to refresh your garden by removing old flowers and providing space for new ones to take their place. You can use your fingers to pop off old flower heads as soon as they look tired, although you’re less likely to damage the plant if you use shears instead. When deadheading, make sure you cut well below the flower so that you aren’t left with a long, flowerless stem sticking out in your garden bed. Instead, cut the stem to just above the point where the side stem joins the main plant. Remove yellow and diseased leaves, this increases the ventilation and light penetration of the plant and facilitates its growth. When pruning, the leaves need to be trimmed off together with the petiole. It is best to use sterilised scissors to cut them off. Note: It’s a good idea to ensure scissors or garden shears are clean before use—you can soak them for thirty minutes in a solution of one part bleach diluted in nine parts water. This reduces the risk of spreading disease lingering on contaminated equipment into your flower garden.