About
More About How-Tos
Seasonal Tips
Pests & Diseases
More Info
Related Plants
How to Care for Silvervein Creeper
Silvervein creeper is a vigorous deciduous climber that is self-clinging and can attach to garden walls or trees. Its leaves are one of its most attractive qualities, as they have three to five leaflets with gorgeous silver veins running through them. The leaves have deep burgundy undersides and are sometimes flushed with purple.
Water
Every week
Sunlight
Partial sun
More About How-Tos
Water
Every week
For Silvervein creeper, originating from warm climates, it prefers well-draining soil and moderate watering, particularly during its growing season. Be cautious not to overwater as it can lead to root rot. Water only when the top inch of soil is dry.
Learn More 
Lighting
Partial sun
Silvervein creeper thrives in a location that receives a moderate amount of sunlight, though it can acclimatize to areas with either more or less exposure. Its origin habitat features variable light conditions, both in intensity and duration. Lack of adequate sunlight can hinder the lush growth, while excessive light may lead to leaf scorch.
Temperature
-10 to 35 ℃
Silvervein creeper is a native to milder climates, with temperatures typically ranging from 50 to 95 °F (10 to 35 ℃). In hotter seasons, it might need additional watering to cool down. In the cooler months, protect it from freezing.
Seasonal Care Tips
Spring
Summer
Fall
Winter
Temperate trees and shrubs like your plant require little care in the spring, but it is the best time for planting.
1
Wait to plant until the soil is warm in a protected area with partial sunlight.
2
Deeply water new specimens but leave mature ones alone except in severe droughts.
3
Fertilize every three or four weeks or apply a layer of compost once in early spring.
4
Prune back any dead growth and shape the plant.
5
If growing in a container, move the plant to a sunny location.
Hot summer temperatures are the reason temperate trees and shrubs like this plant thrive in partially shady areas.
1
Increase watering when rainfall is scarce, even with mature specimens. The soak and dry method work best.
2
Keep an eye out for pests and diseases and remove any debris from the area.
3
Apply another application of fertilizer or compost to the base of the plant.
4
Prune back any excessive growth but watch out for newly emerging leaf buds. Try to leave those on the plant for fall growth.
Continue caring for your plant through the fall, when it can add some decoration to gardens or rooms.
1
Add fertilizer and cold protection to your plant in the form of mulch to help it survive the colder weather, especially when it’s planted outdoors in colder locations.
2
You can plant new shrubs during this season.
3
Continue providing established plants with regular watering, soaking dry soil.
4
Look out for pests and diseases, including leaf spots and mealybugs.
5
Keep the shrubs in a shady locations, but make sure it gets some exposure to bright, indirect light, especially if it’s grown indoors.
While the plant is somewhat dormant during this season, it can also provide some lovely decoration and requires some care to keep it looking its best.
1
In the winter, you can take the opportunity to prune away overcrowding, dead, or diseased branches. Dormancy is the best time to perform these tidying tasks.
2
Sensitive plants can be brought indoors to overwinter away from frost and cold wind if they’re potted and able to be moved. Otherwise, the plant may do well outdoors in more tropical locations, where the temperature doesn’t plummet so much.
Common Pests & Diseases
Common issues for Silvervein creeper based on 10 million real cases
Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.
Solutions: Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers. For severe cases: Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects. Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans. Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps. For less severe cases: Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water. Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Solutions: Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it. Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find. Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray. Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Solutions: Each source of scarring requires a different approach to help your plant recover. Protect the trunk and leaves from physical damage like scrapes. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs. Frequent leaf or bud loss may be due to insufficient light or nutrients.
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Solutions: The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method. Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly. Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems. Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species. Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil. Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.
Overview
Caterpillars can cause problems for home gardeners. If not managed, these insects can defoliate a plant in just a matter of days. However, home gardeners face a challenge because these caterpillars eventually turn into beautiful butterflies and moths, which are important for pollination and the general ecosystem.
There are thousands of different species of caterpillars and many will only target certain plants. If caterpillars are posing a problem, they can be removed by hand, or gardeners can use insect-proof netting to protect their valuable plants.
Symptom Analysis
Caterpillars are the larvae of butterflies and moths. During the warmer months, butterflies and moths that visit gardens will lay their eggs on the underside of leaves.
When the tiny eggs hatch, the young larvae emerge and start feeding on the leaves of the plant. Depending on how many larvae have hatched, they can easily defoliate the plant in a very short period of time. Caterpillars will shed their skin as they grow, around 4 or 5 times during this feeding cycle.
Symptoms of caterpillars eating plants appear as holes in the leaves. The edges of the leaves may be eaten away as well, and flowers can be affected as well.
Some are easy to see, but others need to be searched for. This is because their bodies are often camouflaged to look like part of the plant. Gardeners need to look carefully along the stems of the plant as well as under the leaves. Also, look for tiny white, yellow, or brown eggs that can be found in groups on the underside of leaves.
Once the caterpillar is fully grown, it transforms into a pupa or chrysalis. Then, after a period of time that varies according to the species, a butterfly or moth will emerge from the pupa and the cycle begins again.
Solutions
Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers.
For severe cases:
- Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects.
- Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans.
- Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps.
For less severe cases:
- Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water.
- Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.
Prevention
Prevention may require less effort than attempts to eradicate infestations that have already begun. Here are our top steps for prevention:
- Monitor plants. Check plants regularly for caterpillar eggs on leaves. If they do not belong to an endangered species, they should be squished.
- Use insect netting. Cover plants with insect netting to prevent butterflies and moths from laying eggs on plants.
- Apply diatomaceous earth. Apply DE to plants early in the season and reapply after rain.
- Encourage plant diversity. This will attract predatory insects including parasitic wasps.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Symptom Analysis
Your plant has developed tiny yellowish spots scattered across the leaves that look like mold or mildew. If these marks won't wipe off, they are likely caused by sap-sucking insects like aphids, squash bugs, scale bugs, leafhoppers, whiteflies, mites, mealybugs, and more.
Each of these pests uses mouthparts to pierce leaf tissues and suck the sap. uses mouthparts to pierce leaf tissues and suck the sap. Signs of damage are difficult to spot at first, but a large infestation can quickly compromise the whole plant. You're most likely to see sap-sucking insects during the hottest months because plants make easier targets when already weakened from heat or drought.
Though sap-sucking insects are unlikely to kill your plant on their own, they can severely weaken it and make it more susceptible to disease. They may also spread viruses from one plant to another as they feed.
Solutions
Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it.
- Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find.
- Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray.
- Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Prevention
Healthy plants are less likely to suffer from sap-sucker attacks. Keep them fortified with fertilizer and the right amounts of water and sunlight. Plants that receive excess nitrogen are also more susceptible to attack, so don’t overfertilize. You should also remove weeds and tall grasses surrounding your outdoor plants so as not to create habitat space for the pests.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Symptom Analysis
Scars form when the plant repairs wounds. They can be the result of people or pets passing by and scraping the plant. Once the underlying issue is resolved, the plant will heal but a scar may remain.
Pests and pathogens can also cause scarring. Insects may attack the plant for a meal, resulting in extensive scarring when a few invaders turn into an infestation. Diseases such as fungus and bacteria can weaken the plant, causing brown spots, mushy areas, or blisters that lead to scars.
Scars occur on stems when a leaf or bud has been lost and the plant has healed. The harder tissue is like a scab that protects a wound.
On other occasions, scars can signal problems from environmental conditions, such as overexposure to sunlight or heat. It might surprise you to know that plants can suffer from sunburn, even desert dwellers like cactus!
Solutions
Each source of scarring requires a different approach to help your plant recover.
- Protect the trunk and leaves from physical damage like scrapes.
- If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray.
- Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs.
- Frequent leaf or bud loss may be due to insufficient light or nutrients.
Prevention
Preventing some sources of scarring is easier than others, but all start with careful attention to your plants once you decide to bring them home.
- Review specific guidelines for your plant, including soil drainage, watering, and fertilizer requirements.
- Inspect plants before planting and use sterile pots and fresh potting soil or media to limit transfer of fungi or bacteria.
- Once established, check your plants regularly for signs of scarring or the presence of pests, as it is better to catch problems as early as possible.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Symptom Analysis
Your plant has dried out and turned brown. It might be starting to wilt, with no noticeable green around the stems and leaves. Touch the leaves, and they may crinkle under your fingers.
Possible causes of a dried out plant include:
- Not enough water. A lack of water will lead to dry plant tissue.
- Too much water. Watering too much can lead to root rot which makes the plant struggle to take up water. Rotted, mushy roots are a sign of overeating.
- Entering dormancy. As perennial plants enter their resting period known as dormancy, their leaves dry out and may fall off. This happens during decreasing day length.
- Exposure to herbicides and other toxic substances. If a plant is hit with a large dose herbicide or other toxic chemical, the plant will turn brown.
- Too much fertility. An excess of fertilizer can prevent plants from taking up water, leading to drying.
- Improper sun exposure. Just like humans, plants can get sunburn by intense, direct light. Plants can also dry out if they don’t receive enough light.
To determine whether the plant is still alive and can be saved, you can:
- Bend a stem. If the stem is pliable, the plant is still alive. If the stem breaks, the plant is dead.
- Gently scratch the stem with your fingernail for signs of green inside. If your plant is dead, the stem will be brittle and brown throughout.
- Cut the stems back a little bit a time for visible green growth. If none of the stems have visible green growth, the plant is dead.
Solutions
The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method.
- Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly.
- Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems.
- Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species.
- Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil.
- Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Prevention
Prevention involves providing your plant with the proper environment.
- Provide the proper amount of water. The amount of water depends on a plant’s size, species, and environment. A general rule is to allow soil to dry out between waterings.
- Place plants in the proper environment. Provide the proper hours of sun and temperature for your individual plant.
- Provide proper fertility. Most plants only need to be fertilized once or twice a year; don’t overapply.
- Keep plants free from toxic substances. Keep herbicides and toxic household chemicals away from your plants.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
More About Silvervein Creeper
Plant Type
Vine
Lifespan
Perennial
Spread
3 m
Bloom Time
Late spring, Summer
Flower Color
Green
Leaf Color
Green
White
Red
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Plants with Same Care Needs
China rose
The china rose (Rosa chinensis) is a Southwest China native. The plant has been cultivated for so long that it has become hard to tell the difference between wild and cultivated varieties. With medium-sized clusters of flowers and a long blooming season, it is easy to see why the china rose was chosen as the basis for many rose hybrids.
Bloom Time
Late spring
Ditch lily
The ditch lily is a perennial plant known for its captivating lily-like blooms. Its natural habitats are meadows and forests, but it is also a common garden plant in temperate regions around the world. Each individual flower lasts only a day, but the plant will bloom new ones for weeks. Ditch lily's young buds and flowers are edible either raw or cooked. As a bonus to vegetarians, the flowers contain more fats than most vegetables.
Bloom Time
Late spring
Golden pothos
The golden pothos (Epipremnum aureum) is a popular houseplant that is commonly seen in Australia, Asia, and the West Indies. It goes by many nicknames, including "devil's ivy", because it is so hard to kill and can even grow in low light conditions. Golden pothos has poisonous sap, so it should be kept away from pets and children.
Pepper
The pepper are commonly used for cooking in places such as the Southern U.S. and Central America. Most are moderately spicy, though because there are so many variants, the spice level can vary dramatically. Cayenne powder is also a popular seasoning product made from pepper plants.
Bloom Time
Late spring
Eastern red cedar
Eastern red cedar is a coniferous evergreen tree that is native to North America. The fruit of this tree, juniper berries, is an important food source for birds in the winter. The wood of the eastern red cedar is used in fencing as it is resistant to rot, and it is also used to line closets and chests since it also resists moths.
Bloom Time
Late spring
Tree of heaven
While the tree of heaven has a lovely name, it has a bad reputation in many areas of the US. Several states consider it an invasive species because of its aggressive growth, rapid reproduction, and ability to thrive in poor conditions. The root system of this tree routinely damages sidewalks, sewer systems and other structures.
Bloom Time
Late spring
View More Plants
Botanist in your pocket
App
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
Botanist in your pocket
Scan QR code to download
About
More About How-Tos
Seasonal Tips
Pests & Diseases
More Info
How to Care for Silvervein Creeper
Silvervein creeper is a vigorous deciduous climber that is self-clinging and can attach to garden walls or trees. Its leaves are one of its most attractive qualities, as they have three to five leaflets with gorgeous silver veins running through them. The leaves have deep burgundy undersides and are sometimes flushed with purple.
Every week
Water ![]()
Partial sun
Sunlight ![]()
More About How-Tos
Seasonal Care Tips
Spring
Summer
Fall
Winter
Temperate trees and shrubs like your plant require little care in the spring, but it is the best time for planting.
1
Wait to plant until the soil is warm in a protected area with partial sunlight.
2
Deeply water new specimens but leave mature ones alone except in severe droughts.
3
Fertilize every three or four weeks or apply a layer of compost once in early spring.
4
Prune back any dead growth and shape the plant.
5
If growing in a container, move the plant to a sunny location.
Hot summer temperatures are the reason temperate trees and shrubs like this plant thrive in partially shady areas.
1
Increase watering when rainfall is scarce, even with mature specimens. The soak and dry method work best.
2
Keep an eye out for pests and diseases and remove any debris from the area.
3
Apply another application of fertilizer or compost to the base of the plant.
4
Prune back any excessive growth but watch out for newly emerging leaf buds. Try to leave those on the plant for fall growth.
Continue caring for your plant through the fall, when it can add some decoration to gardens or rooms.
1
Add fertilizer and cold protection to your plant in the form of mulch to help it survive the colder weather, especially when it’s planted outdoors in colder locations.
2
You can plant new shrubs during this season.
3
Continue providing established plants with regular watering, soaking dry soil.
4
Look out for pests and diseases, including leaf spots and mealybugs.
5
Keep the shrubs in a shady locations, but make sure it gets some exposure to bright, indirect light, especially if it’s grown indoors.
While the plant is somewhat dormant during this season, it can also provide some lovely decoration and requires some care to keep it looking its best.
1
In the winter, you can take the opportunity to prune away overcrowding, dead, or diseased branches. Dormancy is the best time to perform these tidying tasks.
2
Sensitive plants can be brought indoors to overwinter away from frost and cold wind if they’re potted and able to be moved. Otherwise, the plant may do well outdoors in more tropical locations, where the temperature doesn’t plummet so much.
Common Pests & Diseases
Common issues for Silvervein creeper based on 10 million real cases
Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.
Solutions: Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers. For severe cases: Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects. Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans. Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps. For less severe cases: Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water. Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.
Learn More ![more]()
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Solutions: Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it. Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find. Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray. Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Learn More ![more]()
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Solutions: Each source of scarring requires a different approach to help your plant recover. Protect the trunk and leaves from physical damage like scrapes. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs. Frequent leaf or bud loss may be due to insufficient light or nutrients.
Learn More ![more]()
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Solutions: The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method. Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly. Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems. Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species. Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil. Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Learn More ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.
Overview
Caterpillars can cause problems for home gardeners. If not managed, these insects can defoliate a plant in just a matter of days. However, home gardeners face a challenge because these caterpillars eventually turn into beautiful butterflies and moths, which are important for pollination and the general ecosystem.
There are thousands of different species of caterpillars and many will only target certain plants. If caterpillars are posing a problem, they can be removed by hand, or gardeners can use insect-proof netting to protect their valuable plants.
Symptom Analysis
Caterpillars are the larvae of butterflies and moths. During the warmer months, butterflies and moths that visit gardens will lay their eggs on the underside of leaves.
When the tiny eggs hatch, the young larvae emerge and start feeding on the leaves of the plant. Depending on how many larvae have hatched, they can easily defoliate the plant in a very short period of time. Caterpillars will shed their skin as they grow, around 4 or 5 times during this feeding cycle.
Symptoms of caterpillars eating plants appear as holes in the leaves. The edges of the leaves may be eaten away as well, and flowers can be affected as well.
Some are easy to see, but others need to be searched for. This is because their bodies are often camouflaged to look like part of the plant. Gardeners need to look carefully along the stems of the plant as well as under the leaves. Also, look for tiny white, yellow, or brown eggs that can be found in groups on the underside of leaves.
Once the caterpillar is fully grown, it transforms into a pupa or chrysalis. Then, after a period of time that varies according to the species, a butterfly or moth will emerge from the pupa and the cycle begins again.
Solutions
Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers.
For severe cases:
- Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects.
- Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans.
- Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps.
For less severe cases:
- Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water.
- Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.
Prevention
Prevention may require less effort than attempts to eradicate infestations that have already begun. Here are our top steps for prevention:
- Monitor plants. Check plants regularly for caterpillar eggs on leaves. If they do not belong to an endangered species, they should be squished.
- Use insect netting. Cover plants with insect netting to prevent butterflies and moths from laying eggs on plants.
- Apply diatomaceous earth. Apply DE to plants early in the season and reapply after rain.
- Encourage plant diversity. This will attract predatory insects including parasitic wasps.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Symptom Analysis
Your plant has developed tiny yellowish spots scattered across the leaves that look like mold or mildew. If these marks won't wipe off, they are likely caused by sap-sucking insects like aphids, squash bugs, scale bugs, leafhoppers, whiteflies, mites, mealybugs, and more.
Each of these pests uses mouthparts to pierce leaf tissues and suck the sap. uses mouthparts to pierce leaf tissues and suck the sap. Signs of damage are difficult to spot at first, but a large infestation can quickly compromise the whole plant. You're most likely to see sap-sucking insects during the hottest months because plants make easier targets when already weakened from heat or drought.
Though sap-sucking insects are unlikely to kill your plant on their own, they can severely weaken it and make it more susceptible to disease. They may also spread viruses from one plant to another as they feed.
Solutions
Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it.
- Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find.
- Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray.
- Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Prevention
Healthy plants are less likely to suffer from sap-sucker attacks. Keep them fortified with fertilizer and the right amounts of water and sunlight. Plants that receive excess nitrogen are also more susceptible to attack, so don’t overfertilize. You should also remove weeds and tall grasses surrounding your outdoor plants so as not to create habitat space for the pests.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Symptom Analysis
Scars form when the plant repairs wounds. They can be the result of people or pets passing by and scraping the plant. Once the underlying issue is resolved, the plant will heal but a scar may remain.
Pests and pathogens can also cause scarring. Insects may attack the plant for a meal, resulting in extensive scarring when a few invaders turn into an infestation. Diseases such as fungus and bacteria can weaken the plant, causing brown spots, mushy areas, or blisters that lead to scars.
Scars occur on stems when a leaf or bud has been lost and the plant has healed. The harder tissue is like a scab that protects a wound.
On other occasions, scars can signal problems from environmental conditions, such as overexposure to sunlight or heat. It might surprise you to know that plants can suffer from sunburn, even desert dwellers like cactus!
Solutions
Each source of scarring requires a different approach to help your plant recover.
- Protect the trunk and leaves from physical damage like scrapes.
- If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray.
- Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs.
- Frequent leaf or bud loss may be due to insufficient light or nutrients.
Prevention
Preventing some sources of scarring is easier than others, but all start with careful attention to your plants once you decide to bring them home.
- Review specific guidelines for your plant, including soil drainage, watering, and fertilizer requirements.
- Inspect plants before planting and use sterile pots and fresh potting soil or media to limit transfer of fungi or bacteria.
- Once established, check your plants regularly for signs of scarring or the presence of pests, as it is better to catch problems as early as possible.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Symptom Analysis
Your plant has dried out and turned brown. It might be starting to wilt, with no noticeable green around the stems and leaves. Touch the leaves, and they may crinkle under your fingers.
Possible causes of a dried out plant include:
- Not enough water. A lack of water will lead to dry plant tissue.
- Too much water. Watering too much can lead to root rot which makes the plant struggle to take up water. Rotted, mushy roots are a sign of overeating.
- Entering dormancy. As perennial plants enter their resting period known as dormancy, their leaves dry out and may fall off. This happens during decreasing day length.
- Exposure to herbicides and other toxic substances. If a plant is hit with a large dose herbicide or other toxic chemical, the plant will turn brown.
- Too much fertility. An excess of fertilizer can prevent plants from taking up water, leading to drying.
- Improper sun exposure. Just like humans, plants can get sunburn by intense, direct light. Plants can also dry out if they don’t receive enough light.
To determine whether the plant is still alive and can be saved, you can:
- Bend a stem. If the stem is pliable, the plant is still alive. If the stem breaks, the plant is dead.
- Gently scratch the stem with your fingernail for signs of green inside. If your plant is dead, the stem will be brittle and brown throughout.
- Cut the stems back a little bit a time for visible green growth. If none of the stems have visible green growth, the plant is dead.
Solutions
The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method.
- Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly.
- Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems.
- Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species.
- Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil.
- Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Prevention
Prevention involves providing your plant with the proper environment.
- Provide the proper amount of water. The amount of water depends on a plant’s size, species, and environment. A general rule is to allow soil to dry out between waterings.
- Place plants in the proper environment. Provide the proper hours of sun and temperature for your individual plant.
- Provide proper fertility. Most plants only need to be fertilized once or twice a year; don’t overapply.
- Keep plants free from toxic substances. Keep herbicides and toxic household chemicals away from your plants.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
More About Silvervein Creeper
Plant Type
Vine
Lifespan
Perennial
Spread
3 m
Bloom Time
Late spring, Summer
Flower Color
Green
Leaf Color
Green
White
Red
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Sign in/sign up
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Water
Indoor
Indoor
Outdoor potted
In the ground
Choose a site here for personalized care tips. Essentials
For Silvervein creeper, originating from warm climates, it prefers well-draining soil and moderate watering, particularly during its growing season. Be cautious not to overwater as it can lead to root rot. Water only when the top inch of soil is dry.
Watering check today
More
Spring
Summer
Autumn
Winter
Morning
Noonday
Evening
Morning watering can reduce the risk of fungal growth. Requirements
Every week
Watering Frequency
Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App
Just like people, each plant has its own preferences and needs. Devote time to understanding your plants so you can nurture them properly. Observe your plants attentively, learning from their growth patterns, and becoming more in tune with their needs as you grow together. Keep a watchful eye on new plants and seedlings, as they are sensitive to both overwatering and underwatering. Shower them with gentle love and attention, fostering their growth and strength. Let the rhythm of your local climate guide your watering habits, adapting your schedule to the changing weather and the needs of your plants. Amount and Approach
Watering from the soil
1. Gradually pour water to the soil from above.
2. Stop watering your plant once water begins to flow out of the drainage holes in the pot.
3. Allow it to rest for 1 minute, then discard any water remaining in the tray, making sure your plant is not sitting in the water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Watering from the bottom
1. Fill the tray with water, ensure that the soil makes contact with the water.
2. Let it rest for 10 minutes.
3. Drain excess water from the tray if the soil is uniformly damp.
4. Watering more to the tray if the soil remains dry.
5. Allow it to sit for an additional 20 minutes before draining any excess water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Soaking the water
1. Select a location for soaking your plants, such as a tray or bathtub.
2. Pour a few centimeters of fresh water into the bottom of your chosen container.
3. Soaking your plant pots within the water, allowing them to absorb moisture for 1 hour.
4. Remove the plants from the water and let them dry.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. 
For Silvervein creeper, outdoor watering can be done using a sprinkler head. This involves using a sprinkler or hose nozzle to evenly spray water over the surface of the plant's soil. The sprinkler head can be adjusted to control the flow of water and the spray range, catering to the watering needs of different-sized plants. Keep them running for 10-20 minutes to ensure that water adequately penetrates the soil.
Important Symptoms
Overwatering
Silvervein creeper is more susceptible to developing disease symptoms when overwatered because it prefers a soil environment with moderate humidity. Symptoms of overwatering include yellowing leaves, root rot, leaf drop...
View more
(Symptom details and solutions)
Yellowing leaves
When plants receive too much water, the roots become oxygen deprived and the bottom leaves of the plant gradually turn yellow.
Root rot
Excess water in the soil can lead to the growth of harmful fungi and bacteria, causing the roots to rot and eventually kill the plant.
Leaf drop
When plants are overwatered, they may shed their leaves as a response to stress, even if the leaves appear green and healthy.
Mold and mildew
Overwatered plants create a damp environment that can encourage the growth of mold and mildew on soil.
Increased susceptibility diseases
Overwatering plants may become more susceptible and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Adjust watering frequency based on seasons and soil dryness. Wait for soil to dry before watering.2. Increase soil aeration by loosening surface and gently stirring with a wooden stick or chopstick.3. Optimize environment with good ventilation and warmth to enhance water evaporation and prevent overwatering.
Underwatering
Silvervein creeper is more susceptible to plant health issues when lacking watering, as it can only tolerate short periods of drought. Symptoms of dehydration include wilting, yellowing leaves, leaf drop...
View more
(Symptom details and solutions)
Wilting
Due to the dry soil and insufficient water absorption by the roots, the leaves of the plant will appear limp, droopy, and lose vitality.
Root damage
Prolonged underwatering can cause root damage, making it difficult for the plant to absorb water even when it is available.
Dry stems
Due to insufficient water, plant stems may become dry or brittle, making the branches easy to break.
Dying plant
If underwatering continues for an extended period, the plant may ultimately die as a result of severe water stress and an inability to carry out essential functions.
Solutions
1. Thoroughly saturate soil with slow ring watering to ensure uniform and sufficient moisture for plants. 2. Increase air humidity with water trays or misting to slow leaf water evaporation. 3. Watering according to the recommended frequency.Adjust watering frequency based on seasons and soil dryness.
Discover care info about seasonal tips, plant diseases, and more?
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Partial sun
Ideal
About 3-6 hours sunlight
Full sun, Full shade
Tolerance
Above 6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
Silvervein creeper thrives in a location that receives a moderate amount of sunlight, though it can acclimatize to areas with either more or less exposure. Its origin habitat features variable light conditions, both in intensity and duration. Lack of adequate sunlight can hinder the lush growth, while excessive light may lead to leaf scorch.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Silvervein creeper is a versatile plant that thrives in full sunlight but can tolerate partial shade. While it can adapt to different light conditions, when grown indoors with insufficient light, subtle symptoms of light deficiency may arise.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your Silvervein creeper may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
Silvervein creeper enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To optimize plant growth, shift them to increasingly sunnier spots each week until they receive 3-6 hours of direct sunlight daily, enabling gradual adaptation to changing light conditions.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Silvervein creeper thrives in full sun exposure but can adapt to partial shade. Although sunburn symptoms occur occasionally, they are generally tolerant of different light conditions due to their resilience.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover care info about seasonal tips, plant diseases, and more?
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
Silvervein creeper is a native to milder climates, with temperatures typically ranging from 50 to 95 °F (10 to 35 ℃). In hotter seasons, it might need additional watering to cool down. In the cooler months, protect it from freezing.
Regional wintering strategies
Silvervein creeper has strong cold resistance, so special frost protection measures are usually not necessary during winter. However, if the winter temperatures are expected to drop below {Limit_growth_temperature}, it is still important to provide cold protection. This can be achieved by wrapping the trunk and branches with materials such as non-woven fabric or cloth. Before the first freeze in autumn, it is recommended to water the plant abundantly, ensuring the soil remains moist and enters a frozen state. This helps prevent drought and water scarcity for the plant during winter and early spring.
Important Symptoms
Low Temperature
Silvervein creeper is cold-tolerant and thrives best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, although there may not be any noticeable changes during winter, the branches may become brittle and dry during springtime, and no new shoots will emerge.
Solutions
In spring, prune away any dead branches that have failed to produce new leaves.
High Temperature
During summer, Silvervein creeper should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the leaves of the plant may become lighter in color, the tips may become dry and withered, and the plant becomes more susceptible to sunburn.
Solutions
Trim away the sunburned and dried-up parts. Move the plant to a location that provides shade from the midday and afternoon sun, or use a shade cloth to create shade. Water the plant in the morning and evening to keep the soil moist.
Discover care info about seasonal tips, plant diseases, and more?
