

About


More About How-Tos


Seasonal Tips


Pests & Diseases


More Info
How to Care for Woodbine
Woodbine (Parthenocissus vitacea) is a plant species native to the United States. This plant species attracts tumbling flower beetles and sweat bees. These insects collect pollen from its flowers.

Symbolism
Intellectual achievement, fertility

Water
Every week


Sunlight
Full sun







More About How-Tos

Water
Every week
The woodbine prefers well-drained soil with moderate moisture, making it quite drought-tolerant. It can adapt to its original woodland habitat's varying moisture levels. Water thoroughly, avoiding the plant's base to prevent rot. Adjust watering based on seasonal changes, reducing during winter months.

Lighting
Full sun
Woodbine thrives under expansive or unobstructed sun exposure throughout the day, and can still grow adequately in conditions where sunlight is available only for a limited duration. Its evolution in open yet shaded environments supports this duality. Extreme exposure or lack thereof may slow growth or cause leaf discoloration.

Temperature
-10 to 35 ℃
Woodbine is a temperate woody plant that prefers a temperature range of 32 to 95 ℉ (0 to 35 ℃). It is native to North America and can be found in various habitats, including woodlands, meadows, and along streams. In hot summer months, it may benefit from providing partial shade to prevent stress.

Seasonal Care Tips

Spring

Summer

Fall

Winter
Temperate trees and shrubs like your plant require little care in the spring, but it is the best time for planting.

1
Wait to plant until the soil is warm in a protected area with partial sunlight.

2
Deeply water new specimens but leave mature ones alone except in severe droughts.

3
Fertilize every three or four weeks or apply a layer of compost once in early spring.

4
Prune back any dead growth and shape the plant.

5
If growing in a container, move the plant to a sunny location.
Hot summer temperatures are the reason temperate trees and shrubs like this plant thrive in partially shady areas.

1
Increase watering when rainfall is scarce, even with mature specimens. The soak and dry method work best.

2
Keep an eye out for pests and diseases and remove any debris from the area.

3
Apply another application of fertilizer or compost to the base of the plant.

4
Prune back any excessive growth but watch out for newly emerging leaf buds. Try to leave those on the plant for fall growth.
Continue caring for your plant through the fall, when it can add some decoration to gardens or rooms.

1
Add fertilizer and cold protection to your plant in the form of mulch to help it survive the colder weather, especially when it’s planted outdoors in colder locations.

2
You can plant new shrubs during this season.

3
Continue providing established plants with regular watering, soaking dry soil.

4
Look out for pests and diseases, including leaf spots and mealybugs.

5
Keep the shrubs in a shady locations, but make sure it gets some exposure to bright, indirect light, especially if it’s grown indoors.
While the plant is somewhat dormant during this season, it can also provide some lovely decoration and requires some care to keep it looking its best.

1
In the winter, you can take the opportunity to prune away overcrowding, dead, or diseased branches. Dormancy is the best time to perform these tidying tasks.

2
Sensitive plants can be brought indoors to overwinter away from frost and cold wind if they’re potted and able to be moved. Otherwise, the plant may do well outdoors in more tropical locations, where the temperature doesn’t plummet so much.

Common Pests & Diseases
Common issues for Woodbine based on 10 million real cases



Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.
Solutions: For less serious cases: Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread. To treat more serious infestations: Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions. Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.



Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.



Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.
Solutions: Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers. For severe cases: Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects. Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans. Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps. For less severe cases: Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water. Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.



Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Solutions: The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method. Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly. Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems. Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species. Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil. Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.

Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.



Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.

Overview
Leaf beetles range in size from 1.5 mm to 2 cm. Both adult beetles and their larvae eat the leaves of many different types of plants. There are over 35,000 different species of leaf beetles, in a variety of colors including gold, green, yellow-striped, and red striped. Some of these have been mistaken for ladybirds because of their shape and coloring. They can be oval, round, or elongated in shape. These insect pests are most active in spring and summer.
If not controlled, leaf beetles can do a lot of damage to vegetable crops and ornamental plants. They feed on the leaves, flowers, stems, roots, and fruits of different plants. They can fly, which means it's easy for them to move from one plant to another. Some species of leaf beetles only target one specific crop, while others will target many different types of plants. Although a lot of the damage that they cause is cosmetic, an infestation can weaken a plant and leave it prone to other more problematic diseases.

Symptom Analysis
The first signs of a leaf beetles infestation are small visible holes in leaves. Leaves then become discolored and dark beetle droppings can be seen. As the leaves turn yellow and brown, they will drop off the plant onto the ground. Some leaves will appear skeletonized with only the veins still remaining.
Infestation begins in spring, when the adult beetles emerge from the soil and lay their eggs on the leaves of plants. When these eggs hatch, the young nymphs start munching on the leaves as they grow up. Once leaf beetles are large and mature, they'll fall to the ground and pupate in the soil over winter before starting the cycle all over again.
Leaf beetles also eat holes in fruits and vegetables. These can be seen as small round holes that sometimes have a larger brown area surrounding them.

Solutions
For less serious cases:
- Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread.
To treat more serious infestations:
- Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions.
- Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.

Prevention
To prevent infestations of leaf beetles, follow these practices.
- Regularly check for beetles. To prevent large pest infestations, be proactive about frequently checking plants for pests and removing them quickly.
- Clear debris. Clear weeds and debris to remove areas where these beetles may overwinter and hide.
- Attract natural predators. Birds and other insects, such as wasps and ladybugs, are effective natural predators of leaf beetles. Encourage them to visit by including a diverse array of plants to provide habitat and food. Also, avoid applying broad-spectrum herbicides that can harm and kill beneficial insects.
- Plant aromatic herbs like mint, garlic, or rosemary, as these can repel leaf beetles.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...

Scan the QR code with your phone camera to download the app
Sign in/sign up

Sign in with Apple
Sign in with Google


Brown spot
This infection can cause brown spots or patches to appear on the plant.

Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.

Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases

Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.

Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.

Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...

Scan the QR code with your phone camera to download the app
Sign in/sign up

Sign in with Apple
Sign in with Google


Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.

Overview
Caterpillars can cause problems for home gardeners. If not managed, these insects can defoliate a plant in just a matter of days. However, home gardeners face a challenge because these caterpillars eventually turn into beautiful butterflies and moths, which are important for pollination and the general ecosystem.
There are thousands of different species of caterpillars and many will only target certain plants. If caterpillars are posing a problem, they can be removed by hand, or gardeners can use insect-proof netting to protect their valuable plants.

Symptom Analysis
Caterpillars are the larvae of butterflies and moths. During the warmer months, butterflies and moths that visit gardens will lay their eggs on the underside of leaves.
When the tiny eggs hatch, the young larvae emerge and start feeding on the leaves of the plant. Depending on how many larvae have hatched, they can easily defoliate the plant in a very short period of time. Caterpillars will shed their skin as they grow, around 4 or 5 times during this feeding cycle.
Symptoms of caterpillars eating plants appear as holes in the leaves. The edges of the leaves may be eaten away as well, and flowers can be affected as well.
Some are easy to see, but others need to be searched for. This is because their bodies are often camouflaged to look like part of the plant. Gardeners need to look carefully along the stems of the plant as well as under the leaves. Also, look for tiny white, yellow, or brown eggs that can be found in groups on the underside of leaves.
Once the caterpillar is fully grown, it transforms into a pupa or chrysalis. Then, after a period of time that varies according to the species, a butterfly or moth will emerge from the pupa and the cycle begins again.

Solutions
Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers.
For severe cases:
- Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects.
- Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans.
- Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps.
For less severe cases:
- Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water.
- Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.

Prevention
Prevention may require less effort than attempts to eradicate infestations that have already begun. Here are our top steps for prevention:
- Monitor plants. Check plants regularly for caterpillar eggs on leaves. If they do not belong to an endangered species, they should be squished.
- Use insect netting. Cover plants with insect netting to prevent butterflies and moths from laying eggs on plants.
- Apply diatomaceous earth. Apply DE to plants early in the season and reapply after rain.
- Encourage plant diversity. This will attract predatory insects including parasitic wasps.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...

Scan the QR code with your phone camera to download the app
Sign in/sign up

Sign in with Apple
Sign in with Google


Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.

Symptom Analysis
Your plant has dried out and turned brown. It might be starting to wilt, with no noticeable green around the stems and leaves. Touch the leaves, and they may crinkle under your fingers.
Possible causes of a dried out plant include:
- Not enough water. A lack of water will lead to dry plant tissue.
- Too much water. Watering too much can lead to root rot which makes the plant struggle to take up water. Rotted, mushy roots are a sign of overeating.
- Entering dormancy. As perennial plants enter their resting period known as dormancy, their leaves dry out and may fall off. This happens during decreasing day length.
- Exposure to herbicides and other toxic substances. If a plant is hit with a large dose herbicide or other toxic chemical, the plant will turn brown.
- Too much fertility. An excess of fertilizer can prevent plants from taking up water, leading to drying.
- Improper sun exposure. Just like humans, plants can get sunburn by intense, direct light. Plants can also dry out if they don’t receive enough light.
To determine whether the plant is still alive and can be saved, you can:
- Bend a stem. If the stem is pliable, the plant is still alive. If the stem breaks, the plant is dead.
- Gently scratch the stem with your fingernail for signs of green inside. If your plant is dead, the stem will be brittle and brown throughout.
- Cut the stems back a little bit a time for visible green growth. If none of the stems have visible green growth, the plant is dead.

Solutions
The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method.
- Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly.
- Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems.
- Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species.
- Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil.
- Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.

Prevention
Prevention involves providing your plant with the proper environment.
- Provide the proper amount of water. The amount of water depends on a plant’s size, species, and environment. A general rule is to allow soil to dry out between waterings.
- Place plants in the proper environment. Provide the proper hours of sun and temperature for your individual plant.
- Provide proper fertility. Most plants only need to be fertilized once or twice a year; don’t overapply.
- Keep plants free from toxic substances. Keep herbicides and toxic household chemicals away from your plants.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...

Scan the QR code with your phone camera to download the app
Sign in/sign up

Sign in with Apple
Sign in with Google

More About Woodbine

Plant Type
Vine

Lifespan
Perennial

Spread
15 to 20 m

Leaf Color
Green
Blue
White

Flower Size
6 to 12 cm

Plant Height
20 m
Name story
Thicket creeper
It is a climbing and sprawling woody vine and the shrubs are formed through the climbing and spreading. These berries contain oxalates while the plant may tend to cause dermatitis in direct contact. Since it has a growing habit of a creeper, it is called thicket creeper.
Usages
Garden Use
Although it looks like one of the best-known garden vines, the Virginia Creeper, woodbine is its less vigorous, less attractive cousin. Still, it grows swiftly and can be used in native, informal, and cottage gardens to grow over trellises and fences, or as a ground cover to conceal unsightly surfaces quickly. However, it can't cling to walls.

Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.


Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
About
More About How-Tos
Seasonal Tips
Pests & Diseases
More Info





How to Care for Woodbine
Woodbine (Parthenocissus vitacea) is a plant species native to the United States. This plant species attracts tumbling flower beetles and sweat bees. These insects collect pollen from its flowers.

Symbolism
Intellectual achievement, fertility

Every week
Water


Full sun
Sunlight


More About How-Tos

Seasonal Care Tips

Spring

Summer

Fall

Winter
Temperate trees and shrubs like your plant require little care in the spring, but it is the best time for planting.

1
Wait to plant until the soil is warm in a protected area with partial sunlight.

2
Deeply water new specimens but leave mature ones alone except in severe droughts.

3
Fertilize every three or four weeks or apply a layer of compost once in early spring.

4
Prune back any dead growth and shape the plant.

5
If growing in a container, move the plant to a sunny location.
Hot summer temperatures are the reason temperate trees and shrubs like this plant thrive in partially shady areas.

1
Increase watering when rainfall is scarce, even with mature specimens. The soak and dry method work best.

2
Keep an eye out for pests and diseases and remove any debris from the area.

3
Apply another application of fertilizer or compost to the base of the plant.

4
Prune back any excessive growth but watch out for newly emerging leaf buds. Try to leave those on the plant for fall growth.
Continue caring for your plant through the fall, when it can add some decoration to gardens or rooms.

1
Add fertilizer and cold protection to your plant in the form of mulch to help it survive the colder weather, especially when it’s planted outdoors in colder locations.

2
You can plant new shrubs during this season.

3
Continue providing established plants with regular watering, soaking dry soil.

4
Look out for pests and diseases, including leaf spots and mealybugs.

5
Keep the shrubs in a shady locations, but make sure it gets some exposure to bright, indirect light, especially if it’s grown indoors.
While the plant is somewhat dormant during this season, it can also provide some lovely decoration and requires some care to keep it looking its best.

1
In the winter, you can take the opportunity to prune away overcrowding, dead, or diseased branches. Dormancy is the best time to perform these tidying tasks.

2
Sensitive plants can be brought indoors to overwinter away from frost and cold wind if they’re potted and able to be moved. Otherwise, the plant may do well outdoors in more tropical locations, where the temperature doesn’t plummet so much.

Common Pests & Diseases
Common issues for Woodbine based on 10 million real cases
Leaf beetles



Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.
Solutions: For less serious cases: Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread. To treat more serious infestations: Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions. Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.
Learn More

Brown spot



This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More

Caterpillars



Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.
Solutions: Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers. For severe cases: Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects. Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans. Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps. For less severe cases: Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water. Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.
Learn More

Plant dried up



The entire plant may dry out due to dieback or normal seasonal dormancy.
Solutions: The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method. Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly. Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems. Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species. Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil. Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Learn More


Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.



Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.

Overview
Leaf beetles range in size from 1.5 mm to 2 cm. Both adult beetles and their larvae eat the leaves of many different types of plants. There are over 35,000 different species of leaf beetles, in a variety of colors including gold, green, yellow-striped, and red striped. Some of these have been mistaken for ladybirds because of their shape and coloring. They can be oval, round, or elongated in shape. These insect pests are most active in spring and summer.
If not controlled, leaf beetles can do a lot of damage to vegetable crops and ornamental plants. They feed on the leaves, flowers, stems, roots, and fruits of different plants. They can fly, which means it's easy for them to move from one plant to another. Some species of leaf beetles only target one specific crop, while others will target many different types of plants. Although a lot of the damage that they cause is cosmetic, an infestation can weaken a plant and leave it prone to other more problematic diseases.

Symptom Analysis
The first signs of a leaf beetles infestation are small visible holes in leaves. Leaves then become discolored and dark beetle droppings can be seen. As the leaves turn yellow and brown, they will drop off the plant onto the ground. Some leaves will appear skeletonized with only the veins still remaining.
Infestation begins in spring, when the adult beetles emerge from the soil and lay their eggs on the leaves of plants. When these eggs hatch, the young nymphs start munching on the leaves as they grow up. Once leaf beetles are large and mature, they'll fall to the ground and pupate in the soil over winter before starting the cycle all over again.
Leaf beetles also eat holes in fruits and vegetables. These can be seen as small round holes that sometimes have a larger brown area surrounding them.

Solutions
For less serious cases:
- Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread.
To treat more serious infestations:
- Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions.
- Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.

Prevention
To prevent infestations of leaf beetles, follow these practices.
- Regularly check for beetles. To prevent large pest infestations, be proactive about frequently checking plants for pests and removing them quickly.
- Clear debris. Clear weeds and debris to remove areas where these beetles may overwinter and hide.
- Attract natural predators. Birds and other insects, such as wasps and ladybugs, are effective natural predators of leaf beetles. Encourage them to visit by including a diverse array of plants to provide habitat and food. Also, avoid applying broad-spectrum herbicides that can harm and kill beneficial insects.
- Plant aromatic herbs like mint, garlic, or rosemary, as these can repel leaf beetles.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up




Brown spot
This infection can cause brown spots or patches to appear on the plant.

Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.

Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases

Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.

Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.

Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up




Caterpillars
Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.

Overview
Caterpillars can cause problems for home gardeners. If not managed, these insects can defoliate a plant in just a matter of days. However, home gardeners face a challenge because these caterpillars eventually turn into beautiful butterflies and moths, which are important for pollination and the general ecosystem.
There are thousands of different species of caterpillars and many will only target certain plants. If caterpillars are posing a problem, they can be removed by hand, or gardeners can use insect-proof netting to protect their valuable plants.

Symptom Analysis
Caterpillars are the larvae of butterflies and moths. During the warmer months, butterflies and moths that visit gardens will lay their eggs on the underside of leaves.
When the tiny eggs hatch, the young larvae emerge and start feeding on the leaves of the plant. Depending on how many larvae have hatched, they can easily defoliate the plant in a very short period of time. Caterpillars will shed their skin as they grow, around 4 or 5 times during this feeding cycle.
Symptoms of caterpillars eating plants appear as holes in the leaves. The edges of the leaves may be eaten away as well, and flowers can be affected as well.
Some are easy to see, but others need to be searched for. This is because their bodies are often camouflaged to look like part of the plant. Gardeners need to look carefully along the stems of the plant as well as under the leaves. Also, look for tiny white, yellow, or brown eggs that can be found in groups on the underside of leaves.
Once the caterpillar is fully grown, it transforms into a pupa or chrysalis. Then, after a period of time that varies according to the species, a butterfly or moth will emerge from the pupa and the cycle begins again.

Solutions
Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers.
For severe cases:
- Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects.
- Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans.
- Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps.
For less severe cases:
- Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water.
- Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.

Prevention
Prevention may require less effort than attempts to eradicate infestations that have already begun. Here are our top steps for prevention:
- Monitor plants. Check plants regularly for caterpillar eggs on leaves. If they do not belong to an endangered species, they should be squished.
- Use insect netting. Cover plants with insect netting to prevent butterflies and moths from laying eggs on plants.
- Apply diatomaceous earth. Apply DE to plants early in the season and reapply after rain.
- Encourage plant diversity. This will attract predatory insects including parasitic wasps.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up




Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.

Symptom Analysis
Your plant has dried out and turned brown. It might be starting to wilt, with no noticeable green around the stems and leaves. Touch the leaves, and they may crinkle under your fingers.
Possible causes of a dried out plant include:
- Not enough water. A lack of water will lead to dry plant tissue.
- Too much water. Watering too much can lead to root rot which makes the plant struggle to take up water. Rotted, mushy roots are a sign of overeating.
- Entering dormancy. As perennial plants enter their resting period known as dormancy, their leaves dry out and may fall off. This happens during decreasing day length.
- Exposure to herbicides and other toxic substances. If a plant is hit with a large dose herbicide or other toxic chemical, the plant will turn brown.
- Too much fertility. An excess of fertilizer can prevent plants from taking up water, leading to drying.
- Improper sun exposure. Just like humans, plants can get sunburn by intense, direct light. Plants can also dry out if they don’t receive enough light.
To determine whether the plant is still alive and can be saved, you can:
- Bend a stem. If the stem is pliable, the plant is still alive. If the stem breaks, the plant is dead.
- Gently scratch the stem with your fingernail for signs of green inside. If your plant is dead, the stem will be brittle and brown throughout.
- Cut the stems back a little bit a time for visible green growth. If none of the stems have visible green growth, the plant is dead.

Solutions
The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method.
- Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly.
- Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems.
- Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species.
- Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil.
- Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.

Prevention
Prevention involves providing your plant with the proper environment.
- Provide the proper amount of water. The amount of water depends on a plant’s size, species, and environment. A general rule is to allow soil to dry out between waterings.
- Place plants in the proper environment. Provide the proper hours of sun and temperature for your individual plant.
- Provide proper fertility. Most plants only need to be fertilized once or twice a year; don’t overapply.
- Keep plants free from toxic substances. Keep herbicides and toxic household chemicals away from your plants.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up


More About Woodbine

Plant Type
Vine

Lifespan
Perennial

Spread
15 to 20 m

Leaf Color
Green
Blue
White

Flower Size
6 to 12 cm

Plant Height
20 m
Name story
Thicket creeper
It is a climbing and sprawling woody vine and the shrubs are formed through the climbing and spreading. These berries contain oxalates while the plant may tend to cause dermatitis in direct contact. Since it has a growing habit of a creeper, it is called thicket creeper.
Usages
Garden Use
Although it looks like one of the best-known garden vines, the Virginia Creeper, woodbine is its less vigorous, less attractive cousin. Still, it grows swiftly and can be used in native, informal, and cottage gardens to grow over trellises and fences, or as a ground cover to conceal unsightly surfaces quickly. However, it can't cling to walls.

Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.


Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!

17,000 local species +400,000 global species studied

Nearly 5 years of research

80+ scholars in botany and gardening
Sign in/sign up



Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up

Water


Indoor

Indoor

Outdoor potted

In the ground



Essentials
The woodbine prefers well-drained soil with moderate moisture, making it quite drought-tolerant. It can adapt to its original woodland habitat's varying moisture levels. Water thoroughly, avoiding the plant's base to prevent rot. Adjust watering based on seasonal changes, reducing during winter months.
Watering check today
More

Spring
Summer
Autumn
Winter
Morning



Noonday



Evening




Requirements

Every week
Watering Frequency

Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App

Amount and Approach
Watering from the soil

1. Gradually pour water to the soil from above.
2. Stop watering your plant once water begins to flow out of the drainage holes in the pot.
3. Allow it to rest for 1 minute, then discard any water remaining in the tray, making sure your plant is not sitting in the water.

Watering from the bottom

1. Fill the tray with water, ensure that the soil makes contact with the water.
2. Let it rest for 10 minutes.
3. Drain excess water from the tray if the soil is uniformly damp.
4. Watering more to the tray if the soil remains dry.
5. Allow it to sit for an additional 20 minutes before draining any excess water.

Soaking the water

1. Select a location for soaking your plants, such as a tray or bathtub.
2. Pour a few centimeters of fresh water into the bottom of your chosen container.
3. Soaking your plant pots within the water, allowing them to absorb moisture for 1 hour.
4. Remove the plants from the water and let them dry.

For Woodbine, outdoor watering can be done using a sprinkler head. This involves using a sprinkler or hose nozzle to evenly spray water over the surface of the plant's soil. The sprinkler head can be adjusted to control the flow of water and the spray range, catering to the watering needs of different-sized plants. Keep them running for 10-20 minutes to ensure that water adequately penetrates the soil.
Important Symptoms
Overwatering
Woodbine is more susceptible to developing disease symptoms when overwatered because it prefers a soil environment with moderate humidity. Symptoms of overwatering include yellowing leaves, root rot, leaf drop...
View more

(Symptom details and solutions)
Yellowing leaves

When plants receive too much water, the roots become oxygen deprived and the bottom leaves of the plant gradually turn yellow.
Root rot

Excess water in the soil can lead to the growth of harmful fungi and bacteria, causing the roots to rot and eventually kill the plant.
Leaf drop

When plants are overwatered, they may shed their leaves as a response to stress, even if the leaves appear green and healthy.
Mold and mildew

Overwatered plants create a damp environment that can encourage the growth of mold and mildew on soil.
Increased susceptibility diseases

Overwatering plants may become more susceptible and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Adjust watering frequency based on seasons and soil dryness. Wait for soil to dry before watering.2. Increase soil aeration by loosening surface and gently stirring with a wooden stick or chopstick.3. Optimize environment with good ventilation and warmth to enhance water evaporation and prevent overwatering.
Underwatering
Woodbine is more susceptible to plant health issues when lacking watering, as it can only tolerate short periods of drought. Symptoms of dehydration include wilting, yellowing leaves, leaf drop...
View more

(Symptom details and solutions)
Wilting

Due to the dry soil and insufficient water absorption by the roots, the leaves of the plant will appear limp, droopy, and lose vitality.
Root damage

Prolonged underwatering can cause root damage, making it difficult for the plant to absorb water even when it is available.
Dry stems

Due to insufficient water, plant stems may become dry or brittle, making the branches easy to break.
Dying plant

If underwatering continues for an extended period, the plant may ultimately die as a result of severe water stress and an inability to carry out essential functions.
Solutions
1. Thoroughly saturate soil with slow ring watering to ensure uniform and sufficient moisture for plants. 2. Increase air humidity with water trays or misting to slow leaf water evaporation. 3. Watering according to the recommended frequency.Adjust watering frequency based on seasons and soil dryness.

Discover care info about seasonal tips, plant diseases, and more?
Lighting


Indoor

Indoor

Outdoor



Requirements

Full sun
Ideal
Above 6 hours sunlight

Partial sun
Tolerance
About 3-6 hours sunlight

Essentials
Woodbine thrives under expansive or unobstructed sun exposure throughout the day, and can still grow adequately in conditions where sunlight is available only for a limited duration. Its evolution in open yet shaded environments supports this duality. Extreme exposure or lack thereof may slow growth or cause leaf discoloration.








Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more

Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Woodbine thrives in full sunlight but is sensitive to heat. As a plant commonly grown outdoors with abundant sunlight, it may exhibit subtle symptoms of light deficiency when placed in rooms with suboptimal lighting.
View more

(Symptom details and solutions)
Small leaves

New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth

The spaces between leaves or stems of your woodbine may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop

When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth

Woodbine enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves

Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Woodbine thrives in full sun exposure but is sensitive to heat. Although sunburn symptoms occasionally occur, they are unable to withstand intense sunlight in high-temperature environments.
View more

(Symptom details and solutions)
Chlorosis

Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald

Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling

Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting

Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching

Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.

Discover care info about seasonal tips, plant diseases, and more?
Temperature


Indoor

Indoor

Outdoor



Requirements

Ideal
Tolerable
Unsuitable

Essentials
Woodbine is a temperate woody plant that prefers a temperature range of 32 to 95 ℉ (0 to 35 ℃). It is native to North America and can be found in various habitats, including woodlands, meadows, and along streams. In hot summer months, it may benefit from providing partial shade to prevent stress.

Regional wintering strategies
Woodbine has strong cold resistance, so special frost protection measures are usually not necessary during winter. However, if the winter temperatures are expected to drop below {Limit_growth_temperature}, it is still important to provide cold protection. This can be achieved by wrapping the trunk and branches with materials such as non-woven fabric or cloth. Before the first freeze in autumn, it is recommended to water the plant abundantly, ensuring the soil remains moist and enters a frozen state. This helps prevent drought and water scarcity for the plant during winter and early spring.
Important Symptoms
Low Temperature
Woodbine is cold-tolerant and thrives best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, although there may not be any noticeable changes during winter, the branches may become brittle and dry during springtime, and no new shoots will emerge.
Solutions
In spring, prune away any dead branches that have failed to produce new leaves.
High Temperature
During summer, Woodbine should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the leaves of the plant may become lighter in color, the tips may become dry and withered, and the plant becomes more susceptible to sunburn.
Solutions
Trim away the sunburned and dried-up parts. Move the plant to a location that provides shade from the midday and afternoon sun, or use a shade cloth to create shade. Water the plant in the morning and evening to keep the soil moist.

Discover care info about seasonal tips, plant diseases, and more?