About
More About How-Tos
Seasonal Tips
Pests & Diseases
More Info
Related Plants
How to Care for Arrowleaf Sida
Arrowleaf sida (Sida rhombifolia) is a perennial plant with delicate yellow blooms on stiff, almost woody stems. The stems are used to make brooms, giving it the common name "broom jute." It is also used to make cord and twine.
Symbolism
Bushy, wiry, solitary
Water
Every week
Sunlight
Full sun
More About How-Tos
Water
Every week
Arrowleaf sida prefers moderately moist soil conditions and can tolerate short periods of drought. This plant thrives in a habitat where its roots have access to consistent moisture, but without standing water.
Lighting
Full sun
Arrowleaf sida thrives under an abundant exposure to sun rays throughout the day, allowing for better growth and health. Lively growth happens in areas that receive a good deal of sun light, though it can endure places with modest sun exposure. Extreme sun deprivation can lead to poor growth.
Temperature
10 to 35 ℃
The arrowleaf sida plant prefers a temperature range of 68 to 100 ℉ (20 to 38 ℃) with optimal growth occurring in the mid-range of this temperature spectrum. In its native growth environment, it thrives in areas with warm temperatures and receives ample sunlight. In the winter, it may require protection from frost, and during the summer months, it can benefit from occasional watering to prevent dehydration.
Seasonal Care Tips
Spring
Summer
Fall
Winter
Tropical herbs like your plant are easy to care for throughout the year but require a little extra attention in the spring.
1
Spring is the ideal time to repot root-bound plants and propagate new ones by cutting off some of the trailing vines.
2
Water once every week or so when the soil is drying out and fertilize with balanced, all-purpose plant food.
3
Ensure the plant is receiving enough sunlight but be careful to not burn the leaves.
4
Spring is also a good time for propagation. Carefully remove a green stem and place it in water. When roots appear, transplant the cutting to a container.
Your plant and other tropical herbs may require more frequent watering in the summer.
1
Check the soil weekly to see if it is drying out.
2
Continue feeding the plant monthly with an all-purpose fertilizer.
3
Remove any dead or yellowing leaves and keep the plant out of direct sunlight to avoid burning the foliage.
4
Check the plant and surrounding area for pests. Gardeners also want to check the leaves and stem for any signs of disease.
5
New growth can be removed from the parent plant for propagation. Place the cutting in water and replant when roots appear.
As your plant continues growing through the fall, continue your care of this plant.
1
Fertilize it on a monthly basis with an all-purpose fertilizer
2
Make sure the soil is kept moist through regular watering, giving the plant water whenever the soil becomes dry.
3
You can take cuttings and propagate more plants during this season as well, repotting fresh-cut stems and letting them grow.
4
Give your plant plenty of indirect light, which will continue to encourage growth throughout the season.
5
However, you must watch out for pests and other diseases, as with all other seasons of growth.
This plant needs only minimal care during these cold winter months.
1
At this time, provide less water and reduce or stop fertilization.
2
The plant will require no extra pruning, but will require strong indirect sunlight, so ensure it’s placed in an ideal location to keep the plant thriving and ready for spring.
3
It's best to ensure the plant isn't exposed to freezing temperatures and kept in warm indoor rooms. Otherwise, you can leave this plant alone until the weather warms up and the plant awakens.
Common Pests & Diseases
Common issues for Arrowleaf sida based on 10 million real cases
Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.
Solutions: For less serious cases: Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread. To treat more serious infestations: Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions. Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Solutions: Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it. Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find. Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray. Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Solutions: Each source of scarring requires a different approach to help your plant recover. Protect the trunk and leaves from physical damage like scrapes. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs. Frequent leaf or bud loss may be due to insufficient light or nutrients.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.
Overview
Leaf beetles range in size from 1.5 mm to 2 cm. Both adult beetles and their larvae eat the leaves of many different types of plants. There are over 35,000 different species of leaf beetles, in a variety of colors including gold, green, yellow-striped, and red striped. Some of these have been mistaken for ladybirds because of their shape and coloring. They can be oval, round, or elongated in shape. These insect pests are most active in spring and summer.
If not controlled, leaf beetles can do a lot of damage to vegetable crops and ornamental plants. They feed on the leaves, flowers, stems, roots, and fruits of different plants. They can fly, which means it's easy for them to move from one plant to another. Some species of leaf beetles only target one specific crop, while others will target many different types of plants. Although a lot of the damage that they cause is cosmetic, an infestation can weaken a plant and leave it prone to other more problematic diseases.
Symptom Analysis
The first signs of a leaf beetles infestation are small visible holes in leaves. Leaves then become discolored and dark beetle droppings can be seen. As the leaves turn yellow and brown, they will drop off the plant onto the ground. Some leaves will appear skeletonized with only the veins still remaining.
Infestation begins in spring, when the adult beetles emerge from the soil and lay their eggs on the leaves of plants. When these eggs hatch, the young nymphs start munching on the leaves as they grow up. Once leaf beetles are large and mature, they'll fall to the ground and pupate in the soil over winter before starting the cycle all over again.
Leaf beetles also eat holes in fruits and vegetables. These can be seen as small round holes that sometimes have a larger brown area surrounding them.
Solutions
For less serious cases:
- Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread.
To treat more serious infestations:
- Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions.
- Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.
Prevention
To prevent infestations of leaf beetles, follow these practices.
- Regularly check for beetles. To prevent large pest infestations, be proactive about frequently checking plants for pests and removing them quickly.
- Clear debris. Clear weeds and debris to remove areas where these beetles may overwinter and hide.
- Attract natural predators. Birds and other insects, such as wasps and ladybugs, are effective natural predators of leaf beetles. Encourage them to visit by including a diverse array of plants to provide habitat and food. Also, avoid applying broad-spectrum herbicides that can harm and kill beneficial insects.
- Plant aromatic herbs like mint, garlic, or rosemary, as these can repel leaf beetles.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Symptom Analysis
Your plant has developed tiny yellowish spots scattered across the leaves that look like mold or mildew. If these marks won't wipe off, they are likely caused by sap-sucking insects like aphids, squash bugs, scale bugs, leafhoppers, whiteflies, mites, mealybugs, and more.
Each of these pests uses mouthparts to pierce leaf tissues and suck the sap. uses mouthparts to pierce leaf tissues and suck the sap. Signs of damage are difficult to spot at first, but a large infestation can quickly compromise the whole plant. You're most likely to see sap-sucking insects during the hottest months because plants make easier targets when already weakened from heat or drought.
Though sap-sucking insects are unlikely to kill your plant on their own, they can severely weaken it and make it more susceptible to disease. They may also spread viruses from one plant to another as they feed.
Solutions
Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it.
- Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find.
- Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray.
- Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Prevention
Healthy plants are less likely to suffer from sap-sucker attacks. Keep them fortified with fertilizer and the right amounts of water and sunlight. Plants that receive excess nitrogen are also more susceptible to attack, so don’t overfertilize. You should also remove weeds and tall grasses surrounding your outdoor plants so as not to create habitat space for the pests.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Symptom Analysis
Scars form when the plant repairs wounds. They can be the result of people or pets passing by and scraping the plant. Once the underlying issue is resolved, the plant will heal but a scar may remain.
Pests and pathogens can also cause scarring. Insects may attack the plant for a meal, resulting in extensive scarring when a few invaders turn into an infestation. Diseases such as fungus and bacteria can weaken the plant, causing brown spots, mushy areas, or blisters that lead to scars.
Scars occur on stems when a leaf or bud has been lost and the plant has healed. The harder tissue is like a scab that protects a wound.
On other occasions, scars can signal problems from environmental conditions, such as overexposure to sunlight or heat. It might surprise you to know that plants can suffer from sunburn, even desert dwellers like cactus!
Solutions
Each source of scarring requires a different approach to help your plant recover.
- Protect the trunk and leaves from physical damage like scrapes.
- If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray.
- Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs.
- Frequent leaf or bud loss may be due to insufficient light or nutrients.
Prevention
Preventing some sources of scarring is easier than others, but all start with careful attention to your plants once you decide to bring them home.
- Review specific guidelines for your plant, including soil drainage, watering, and fertilizer requirements.
- Inspect plants before planting and use sterile pots and fresh potting soil or media to limit transfer of fungi or bacteria.
- Once established, check your plants regularly for signs of scarring or the presence of pests, as it is better to catch problems as early as possible.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
More About Arrowleaf Sida
Plant Type
Herb, Shrub
Bloom Time
Late spring, Summer, Early fall, Mid fall
Flower Color
Yellow
Cream
Orange
Leaf Color
Green
Flower Size
1 cm
Plant Height
50 to 120 cm
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Plants with Same Care Needs
China rose
The china rose (Rosa chinensis) is a Southwest China native. The plant has been cultivated for so long that it has become hard to tell the difference between wild and cultivated varieties. With medium-sized clusters of flowers and a long blooming season, it is easy to see why the china rose was chosen as the basis for many rose hybrids.
Bloom Time
Late spring
Ditch lily
The ditch lily is a perennial plant known for its captivating lily-like blooms. Its natural habitats are meadows and forests, but it is also a common garden plant in temperate regions around the world. Each individual flower lasts only a day, but the plant will bloom new ones for weeks. Ditch lily's young buds and flowers are edible either raw or cooked. As a bonus to vegetarians, the flowers contain more fats than most vegetables.
Bloom Time
Late spring
Golden pothos
The golden pothos (Epipremnum aureum) is a popular houseplant that is commonly seen in Australia, Asia, and the West Indies. It goes by many nicknames, including "devil's ivy", because it is so hard to kill and can even grow in low light conditions. Golden pothos has poisonous sap, so it should be kept away from pets and children.
Pepper
The pepper are commonly used for cooking in places such as the Southern U.S. and Central America. Most are moderately spicy, though because there are so many variants, the spice level can vary dramatically. Cayenne powder is also a popular seasoning product made from pepper plants.
Bloom Time
Late spring
Eastern red cedar
Eastern red cedar is a coniferous evergreen tree that is native to North America. The fruit of this tree, juniper berries, is an important food source for birds in the winter. The wood of the eastern red cedar is used in fencing as it is resistant to rot, and it is also used to line closets and chests since it also resists moths.
Bloom Time
Late spring
Tree of heaven
While the tree of heaven has a lovely name, it has a bad reputation in many areas of the US. Several states consider it an invasive species because of its aggressive growth, rapid reproduction, and ability to thrive in poor conditions. The root system of this tree routinely damages sidewalks, sewer systems and other structures.
Bloom Time
Late spring
View More Plants
Botanist in your pocket
App
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
Botanist in your pocket
Scan QR code to download
About
More About How-Tos
Seasonal Tips
Pests & Diseases
More Info
How to Care for Arrowleaf Sida
Arrowleaf sida (Sida rhombifolia) is a perennial plant with delicate yellow blooms on stiff, almost woody stems. The stems are used to make brooms, giving it the common name "broom jute." It is also used to make cord and twine.
Symbolism
Bushy, wiry, solitary
Every week
Water ![]()
Full sun
Sunlight ![]()
More About How-Tos
Seasonal Care Tips
Spring
Summer
Fall
Winter
Tropical herbs like your plant are easy to care for throughout the year but require a little extra attention in the spring.
1
Spring is the ideal time to repot root-bound plants and propagate new ones by cutting off some of the trailing vines.
2
Water once every week or so when the soil is drying out and fertilize with balanced, all-purpose plant food.
3
Ensure the plant is receiving enough sunlight but be careful to not burn the leaves.
4
Spring is also a good time for propagation. Carefully remove a green stem and place it in water. When roots appear, transplant the cutting to a container.
Your plant and other tropical herbs may require more frequent watering in the summer.
1
Check the soil weekly to see if it is drying out.
2
Continue feeding the plant monthly with an all-purpose fertilizer.
3
Remove any dead or yellowing leaves and keep the plant out of direct sunlight to avoid burning the foliage.
4
Check the plant and surrounding area for pests. Gardeners also want to check the leaves and stem for any signs of disease.
5
New growth can be removed from the parent plant for propagation. Place the cutting in water and replant when roots appear.
As your plant continues growing through the fall, continue your care of this plant.
1
Fertilize it on a monthly basis with an all-purpose fertilizer
2
Make sure the soil is kept moist through regular watering, giving the plant water whenever the soil becomes dry.
3
You can take cuttings and propagate more plants during this season as well, repotting fresh-cut stems and letting them grow.
4
Give your plant plenty of indirect light, which will continue to encourage growth throughout the season.
5
However, you must watch out for pests and other diseases, as with all other seasons of growth.
This plant needs only minimal care during these cold winter months.
1
At this time, provide less water and reduce or stop fertilization.
2
The plant will require no extra pruning, but will require strong indirect sunlight, so ensure it’s placed in an ideal location to keep the plant thriving and ready for spring.
3
It's best to ensure the plant isn't exposed to freezing temperatures and kept in warm indoor rooms. Otherwise, you can leave this plant alone until the weather warms up and the plant awakens.
Common Pests & Diseases
Common issues for Arrowleaf sida based on 10 million real cases
Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.
Solutions: For less serious cases: Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread. To treat more serious infestations: Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions. Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.
Learn More ![more]()
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Solutions: Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it. Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find. Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray. Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Learn More ![more]()
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Solutions: Each source of scarring requires a different approach to help your plant recover. Protect the trunk and leaves from physical damage like scrapes. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs. Frequent leaf or bud loss may be due to insufficient light or nutrients.
Learn More ![more]()
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.
Overview
Leaf beetles range in size from 1.5 mm to 2 cm. Both adult beetles and their larvae eat the leaves of many different types of plants. There are over 35,000 different species of leaf beetles, in a variety of colors including gold, green, yellow-striped, and red striped. Some of these have been mistaken for ladybirds because of their shape and coloring. They can be oval, round, or elongated in shape. These insect pests are most active in spring and summer.
If not controlled, leaf beetles can do a lot of damage to vegetable crops and ornamental plants. They feed on the leaves, flowers, stems, roots, and fruits of different plants. They can fly, which means it's easy for them to move from one plant to another. Some species of leaf beetles only target one specific crop, while others will target many different types of plants. Although a lot of the damage that they cause is cosmetic, an infestation can weaken a plant and leave it prone to other more problematic diseases.
Symptom Analysis
The first signs of a leaf beetles infestation are small visible holes in leaves. Leaves then become discolored and dark beetle droppings can be seen. As the leaves turn yellow and brown, they will drop off the plant onto the ground. Some leaves will appear skeletonized with only the veins still remaining.
Infestation begins in spring, when the adult beetles emerge from the soil and lay their eggs on the leaves of plants. When these eggs hatch, the young nymphs start munching on the leaves as they grow up. Once leaf beetles are large and mature, they'll fall to the ground and pupate in the soil over winter before starting the cycle all over again.
Leaf beetles also eat holes in fruits and vegetables. These can be seen as small round holes that sometimes have a larger brown area surrounding them.
Solutions
For less serious cases:
- Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread.
To treat more serious infestations:
- Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions.
- Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.
Prevention
To prevent infestations of leaf beetles, follow these practices.
- Regularly check for beetles. To prevent large pest infestations, be proactive about frequently checking plants for pests and removing them quickly.
- Clear debris. Clear weeds and debris to remove areas where these beetles may overwinter and hide.
- Attract natural predators. Birds and other insects, such as wasps and ladybugs, are effective natural predators of leaf beetles. Encourage them to visit by including a diverse array of plants to provide habitat and food. Also, avoid applying broad-spectrum herbicides that can harm and kill beneficial insects.
- Plant aromatic herbs like mint, garlic, or rosemary, as these can repel leaf beetles.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Symptom Analysis
Your plant has developed tiny yellowish spots scattered across the leaves that look like mold or mildew. If these marks won't wipe off, they are likely caused by sap-sucking insects like aphids, squash bugs, scale bugs, leafhoppers, whiteflies, mites, mealybugs, and more.
Each of these pests uses mouthparts to pierce leaf tissues and suck the sap. uses mouthparts to pierce leaf tissues and suck the sap. Signs of damage are difficult to spot at first, but a large infestation can quickly compromise the whole plant. You're most likely to see sap-sucking insects during the hottest months because plants make easier targets when already weakened from heat or drought.
Though sap-sucking insects are unlikely to kill your plant on their own, they can severely weaken it and make it more susceptible to disease. They may also spread viruses from one plant to another as they feed.
Solutions
Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it.
- Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find.
- Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray.
- Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Prevention
Healthy plants are less likely to suffer from sap-sucker attacks. Keep them fortified with fertilizer and the right amounts of water and sunlight. Plants that receive excess nitrogen are also more susceptible to attack, so don’t overfertilize. You should also remove weeds and tall grasses surrounding your outdoor plants so as not to create habitat space for the pests.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Symptom Analysis
Scars form when the plant repairs wounds. They can be the result of people or pets passing by and scraping the plant. Once the underlying issue is resolved, the plant will heal but a scar may remain.
Pests and pathogens can also cause scarring. Insects may attack the plant for a meal, resulting in extensive scarring when a few invaders turn into an infestation. Diseases such as fungus and bacteria can weaken the plant, causing brown spots, mushy areas, or blisters that lead to scars.
Scars occur on stems when a leaf or bud has been lost and the plant has healed. The harder tissue is like a scab that protects a wound.
On other occasions, scars can signal problems from environmental conditions, such as overexposure to sunlight or heat. It might surprise you to know that plants can suffer from sunburn, even desert dwellers like cactus!
Solutions
Each source of scarring requires a different approach to help your plant recover.
- Protect the trunk and leaves from physical damage like scrapes.
- If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray.
- Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs.
- Frequent leaf or bud loss may be due to insufficient light or nutrients.
Prevention
Preventing some sources of scarring is easier than others, but all start with careful attention to your plants once you decide to bring them home.
- Review specific guidelines for your plant, including soil drainage, watering, and fertilizer requirements.
- Inspect plants before planting and use sterile pots and fresh potting soil or media to limit transfer of fungi or bacteria.
- Once established, check your plants regularly for signs of scarring or the presence of pests, as it is better to catch problems as early as possible.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
More About Arrowleaf Sida
Plant Type
Herb, Shrub
Bloom Time
Late spring, Summer, Early fall, Mid fall
Flower Color
Yellow
Cream
Orange
Leaf Color
Green
Flower Size
1 cm
Plant Height
50 to 120 cm
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Sign in/sign up
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Water
Indoor
Indoor
Outdoor potted
In the ground
Choose a site here for personalized care tips. Essentials
Arrowleaf sida prefers moderately moist soil conditions and can tolerate short periods of drought. This plant thrives in a habitat where its roots have access to consistent moisture, but without standing water.
Watering check today
More
Spring
Summer
Autumn
Winter
Morning
Noonday
Evening
Morning watering can reduce the risk of fungal growth. Requirements
Every week
Watering Frequency
Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App
Just like people, each plant has its own preferences and needs. Devote time to understanding your plants so you can nurture them properly. Observe your plants attentively, learning from their growth patterns, and becoming more in tune with their needs as you grow together. Keep a watchful eye on new plants and seedlings, as they are sensitive to both overwatering and underwatering. Shower them with gentle love and attention, fostering their growth and strength. Let the rhythm of your local climate guide your watering habits, adapting your schedule to the changing weather and the needs of your plants. Amount and Approach
Watering from the soil
1. Gradually pour water to the soil from above.
2. Stop watering your plant once water begins to flow out of the drainage holes in the pot.
3. Allow it to rest for 1 minute, then discard any water remaining in the tray, making sure your plant is not sitting in the water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Watering from the bottom
1. Fill the tray with water, ensure that the soil makes contact with the water.
2. Let it rest for 10 minutes.
3. Drain excess water from the tray if the soil is uniformly damp.
4. Watering more to the tray if the soil remains dry.
5. Allow it to sit for an additional 20 minutes before draining any excess water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Soaking the water
1. Select a location for soaking your plants, such as a tray or bathtub.
2. Pour a few centimeters of fresh water into the bottom of your chosen container.
3. Soaking your plant pots within the water, allowing them to absorb moisture for 1 hour.
4. Remove the plants from the water and let them dry.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. 
For Arrowleaf sida, outdoor watering can be done using the method of sprinkling. It is a simple and direct approach. It involves pouring water onto the soil around the plant, allowing the water to naturally seep into the root zone. Typically, containers such as watering cans, buckets, or watering jugs are used for sprinkling. Depending on the size of the plant, usually, 1-2 gallons of water are required to ensure the soil around the roots is thoroughly moistened.
Important Symptoms
Overwatering
Arrowleaf sida is more susceptible to developing disease symptoms when overwatered because it prefers a soil environment with moderate humidity. Symptoms of overwatering include yellowing leaves, brown or black spots, root rot...
View more
(Symptom details and solutions)
Brown or black spots
Excessive watering can damage the plant's root system, making it vulnerable to fungal infections. The plant may develop dark brown to black spots that spread upwards from the lower leaves which are usually the first to be affected.
Root rot
Excess water in the soil can lead to the growth of harmful fungi and bacteria, causing the roots to rot and eventually kill the plant.
Soft or mushy stems
Excess water can cause stems to become soft and mushy, as the cells become waterlogged and lose their structural integrity.
Increased susceptibility diseases
Overwatering plants may become more susceptible and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Adjust watering frequency based on seasons and soil dryness. Wait for soil to dry before watering.2. Increase soil aeration by loosening surface and gently stirring with a wooden stick or chopstick.3. Optimize environment with good ventilation and warmth to enhance water evaporation and prevent overwatering.
Underwatering
Arrowleaf sida is more susceptible to plant health issues when lacking watering, as it can only tolerate short periods of drought. Symptoms of dehydration include wilting, leaf curling, yellowing leaves...
View more
(Symptom details and solutions)
Wilting
Due to the dry soil and insufficient water absorption by the roots, the leaves of the plant will appear limp, droopy, and lose vitality.
Leaf curling
Leaves may curl inward or downward as they attempt to conserve water and minimize water loss through transpiration.
Increased susceptibility to pests and diseases
Underwatered plants may become more susceptible to pests and diseases as their overall health declines, weakening their natural defenses.
Dying plant
If underwatering continues for an extended period, the plant may ultimately die as a result of severe water stress and an inability to carry out essential functions.
Solutions
1. Thoroughly saturate soil with slow ring watering to ensure uniform and sufficient moisture for plants. 2. Increase air humidity with water trays or misting to slow leaf water evaporation. 3. Watering according to the recommended frequency.Adjust watering frequency based on seasons and soil dryness.
Discover care info about seasonal tips, plant diseases, and more?
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Full sun
Ideal
Above 6 hours sunlight
Partial sun
Tolerance
About 3-6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
Arrowleaf sida thrives under an abundant exposure to sun rays throughout the day, allowing for better growth and health. Lively growth happens in areas that receive a good deal of sun light, though it can endure places with modest sun exposure. Extreme sun deprivation can lead to poor growth.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Arrowleaf sida thrives in full sunlight but is often cultivated indoors during winter due to sensitivity to cold. This increases the chance of being placed in rooms with inadequate lighting, leading to noticeable symptoms of light deficiency.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your arrowleaf sida may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
Arrowleaf sida enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Arrowleaf sida thrives in full sun exposure and can tolerate intense sunlight. With their remarkable resilience, symptoms of sunburn may not be easily visible, as they rarely suffer from it.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover care info about seasonal tips, plant diseases, and more?
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
The arrowleaf sida plant prefers a temperature range of 68 to 100 ℉ (20 to 38 ℃) with optimal growth occurring in the mid-range of this temperature spectrum. In its native growth environment, it thrives in areas with warm temperatures and receives ample sunlight. In the winter, it may require protection from frost, and during the summer months, it can benefit from occasional watering to prevent dehydration.
Regional wintering strategies
Arrowleaf sida is extremely heat-loving, and any cold temperatures can cause harm to it. In the autumn, it is recommended to bring outdoor-grown Arrowleaf sida indoors and place it near a bright window, but it should be kept at a certain distance from heaters. Maintaining temperatures above {Suitable_growth_temperature_min} during winter is beneficial for plant growth. Any temperatures approaching {Tolerable_growing_temperature_min} are detrimental to the plant.
Important Symptoms
Low Temperature
Arrowleaf sida prefers warm temperatures and is not tolerant of low temperatures. It thrives best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, the leaves may lighten in color. After frost damage, the color gradually turns brown or black, and symptoms such as wilting and drooping may occur.
Solutions
Trim off the frost-damaged parts. Immediately move indoors to a warm environment for cold protection. Choose a spot near a south-facing window to place the plant, ensuring ample sunlight. Additionally, avoid placing the plant near heaters or air conditioning vents to prevent excessive dryness in the air.
High Temperature
During summer, Arrowleaf sida should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the color of the leaves becomes lighter, and the plant becomes more susceptible to sunburn.
Solutions
Trim away the sunburned and dried-up parts. Move the plant to a location that provides shade from the midday and afternoon sun. Water the plant in the morning and evening to keep the soil moist.
Discover care info about seasonal tips, plant diseases, and more?
