Water fern requires about 6 hours of direct and continuous sunlight daily. These are desirable to help them grow healthily, and this will help them grow faster. You might also want to provide these species with supplemental light during the winter with the help of lamps. The species need several hours of unobstructed sunlight to have vibrant foliage, so you might want to place them in the brightest areas of your garden or indoor nursery.

They are suited to a full sun and don't tend to tolerate shady areas. It's best to have at least 8 inches of space for each plant especially if you’re planting a lot of them so each can get a lot of sunlight. Generally, the Water fern has a high demand for direct, full, and abundant sunlight. During summers, you can place them outside in the morning sun, so they will have enough light to grow. They don't do well with partial sunlight and don't tolerate filtered or part shade. They might also not grow well when a huge tree constantly provides shade, so plant them in areas without obstruction.

The Water fern should never avoid sun exposure because they seek and love the bright light. They love the sun so much that they require at least 6 hours of exposure regardless of the climate. Some areas, especially during the fall and spring, don't need protection because they require full sunlight. However, if you're located in a tropical climate or if the summer sun is too much, it's always possible to transfer the potted species inside until the temperature cools down again. Overall, you don't need to plant them near buildings, tall trees, and other structures because they need full sun for at least 6 hours.

If there's insufficient light, the Water fern will not thrive. This is going to result in poor growth. Fungi and bacteria can feed on the plants' tissues, which are generally common for the plants grown in shady areas. When the plants receive too little sunlight, they tend to become spindly. They will have weaker stems because they are constantly seeking to receive light, and this can result in wilting or brown leaves. You might want to see if there are insects present or a rhizome rot in Water fern as this can be another sign that they are not receiving enough sunlight. If this is the case, put them in another area where they will receive bright and direct light to see if it will make a difference.

During their growing phase, you need to expose the plants to the sun so that they don't have to stretch and grow upwards. You can avoid the process of etiolation and prevent the stems of Water fern from growing weak. This is generally prevalent for those that are receiving no sun or are in a partially shaded area when they are young. When they are already established and have matured, you also need to continuously expose them to a full sun because they need photosynthesis to grow more. When they are placed inside a greenhouse or a nursery for a very long time, and you decide to transfer them into a garden, you need to gradually introduce them to the bright lights. Still, you should never suddenly place them in direct heat, especially if it's mid-afternoon. They need a period to adapt and to become used to the intensity of sunlight in your area, so give them some much-needed time.

As mentioned, the Water fern needs 6 to 7 hours of direct sunlight to do the process of photosynthesis. This helps them produce enough food to grow. You can make this easier for yourself when you group them together and plant them in the same spot in your garden. This way, they will get enough of their light requirements to produce flowers, grow sturdy stems, and produce the glucose that they need for their food.

As mentioned, the Water fern loves the sun, but sometimes too much can hurt it. However, too much harsh sunlight can actually burn the leaves in the summer. When planted in the ground, you might want to add to their watering schedule so they will have protection. Exposure to the blades can result in sunburn, especially when the day's sun is too strong. It's highly recommended to spray some water to cool down the leaves a bit.

You need to minimize transplanting shock, especially for the young and newly-planted Water fern. These species will need time to adjust to their new environment but make sure to choose a location where they will get the full sunlight they need. The amount of sunlight matters as well as the season. Water them during the hottest days to reduce stress, and you might want to cover the young ones when the temperatures are extremely high. Row covers and shade cloths might be applicable for the younger ones, but the mature plants might not need them, especially if they already have established roots and stems. When you see that the Water fern begins to lose its color, this might be because it is not receiving enough sunlight to do photosynthesis. There's not enough chlorophyll to depict a green color; if this is the case, you need to transfer it to an area receiving bright sunlight.

Colder temperatures can affect plants since they have the same temperature as the air around them. When they are exposed to the sun, they can start to get warm again, but this is not the case during winter. The temperature range for the Water fern is often 70~85℉(21~30℃). They might tolerate 20~30℉(-6~0℃) even 15℉(-10℃), but not for long since this can result in frost damage. Maximum temperatures should be around 70~85℉(21~30℃), but make sure that you spray them with water from time to time and give them some shade to prevent wilting.

Do some research and make sure that the temperature is right when growing Water fern. Some growers might consider decreasing the plants' thermostats during the growing season to reduce HVAC costs. However, it's vital to understand that the temperature can affect the flowering, pest management, and quality of the plants. There will be a temperature point where the Water fern will stop growing, and this can happen during the winter when some species might go into a dormant state. The base temperature becomes warmer when the season changes and the Water fern can grow faster. The species that are naturally growing in warm habitats have higher optimum temperatures when you compare them to the ones that thrive in a cooler climate. When the seeds of Water fern are exposed to cool temperatures, this can cause a decrease in uniformity and delays. You might also want to lower the temperature during flowering but not at other phases. Cooler temperatures at night will also require less water, so adjust the irrigation as needed.

Stop fertilizing the plant to avoid new growth and allow the old ones to become hardy. This way, they can endure colder temperature when it begins to drop. To keep them warm, you can build structures around the Water fern like cages or trellises. There are also options to use heat mats that can gently warm the soil since they can consistently maintain an ideal temperature range for the Water fern.

During winter, you can protect the Water fern from frost by covering it with cloths, tarps, burlaps, sheets, or plastic buckets. Make sure to keep them down so they continue to act as insulators and the wind will not blow them away. However, ensure that the plastic sheets or burlap covers should not touch any part of the fruit or foliage, or the cold temperatures can transfer to the material and cause burns. When the temperatures begin to rise during the daytime, remove the covers.

When growing the Water fern in spring, you might want to increase humidity since the air temperature tends to be cooler at this time. A dry temperature can be a stressful growing environment for various species, which can help. If summer arrives, the large cover of the greenhouse and the warm temperature will mean that there will be a higher humidity level in the air. Some signs to look for are the condensation that is often found on the walls of the greenhouse, and this can cause issues with pollination and the development of infections when the water begins to fall on the leaves. Make adjustments according to the temperature and do some spraying during the hotter days of the year.

Generally, the first cold snap can destroy the Water fern and others might go into a dormant state when the temperature is low. Some plants can get chilled when the temperatures range from 20~30℉(-6~0℃). They can freeze when the temperature begins to drop below 32℉(0℃). Those species that hide most of their parts under the soil might lose their structures above ground, but they can recover in spring. Some of the associated issues with too low temperatures are the lack of availability of resources like water, and nutrients, and those subtropical plants can suffer when the temperature reaches below 20℉(-6℃). The plants can also get damaged because of extreme heat stress when it's too high. This can reduce the transpiration rate that can affect the growth and productivity of Water fern.

You need to cover the plants at night since these can add about 5 degrees more to protect the species from frost and freezing temperatures. The cloth rows can work well as blankets and ensure that there are no openings where the heat could escape. When using the covers, avoid the plastic from touching the foliage because this can cause the Water fern to freeze. Remember to keep the covers during the day and stop using heat pads during the summer. It will always be worth the effort to protect the cold-intolerant plants from freezing temperatures to help them survive.

If you prefer not to use a heat pad, bring the Water fern inside, especially if it's freezing outdoors. During spring, consider the ones you need to bring indoors and plant them in moveable pots and containers.

Most often, the ones caring for the Water fern will grow them in greenhouses. This is because they can provide adequate temperature in these areas that won't affect the photosynthesis process of a specific process. Some install the proper HVAC systems to control the temperatures of Water fern. This can handle many species' cooling and heating needs, especially during the summer and winter. They generally place the cooling or heating pad under the plants rather than above to achieve their desired temperatures. If outdoors, you can protect the Water fern from frost by covering it with cloths, tarps, burlaps, sheets, or plastic buckets.

Heat mats are often left on Water fern to set the temperatures at a more consistent level. When the weather becomes warmer during the day, you can remove them, especially if the species are exposed to the sun. Put the pads away once the plants are established and when they start growing flowers and fruits.