To water Watersprite, you can use a garden hose with a spray nozzle, a watering can, or just about any other common watering tool. Generally, Watersprite is not too picky about how they receive their water, as they can live off of rainwater, tap water, or filtered water. Often, you should try not to water this plant from overhead, as doing so can damage the leaves and flowers and may lead to disease as well. At times, the best method for watering this plant is to set up a drip irrigation system. These systems work well for Watersprite as they apply water evenly and directly to the soil. For one Watersprite that grows in a container, you can use a similar watering approach while changing the tools you use. To water a container-grown Watersprite, use a cup, watering can, or your tap to apply water directly to the soil.

The remedy for underwatering Watersprite is somewhat obvious. When you notice that your plant lacks moisture, simply begin watering it on a more regular basis. The issue of overwatering can be a much more dire situation, especially if you fail to notice it early. When your Watersprite is overwatered, it may contract diseases that lead to its decline and death. The best way to prevent this outcome is to choose a proper growing location, one that receives plenty of sunlight to help dry the soil and has good enough drainage to allow excess water to drain rather than pooling and causing waterlogged soils. If you overwater your Watersprite that lives in a pot, you may need to consider changing it to a new pot. Your previous container may not have contained soil with good drainage or may not have had sufficient drainage holes. As you repot your overwatered Watersprite, make sure to add loose soils and to use a pot that drains efficiently.

Watersprite needs water regularly throughout the growing season. Beginning in spring, you should plan to water this plant about once per week. As the season presses on and grows warmer, you may need to increase your watering rate to about two to three times per week. Exceeding at this rate can be detrimental to your Watersprite. With that said, you should also ensure that the soil in which your Watersprite grows remains relatively moist but not wet, regardless of how often you must water to make that the case. Watering Watersprite that lives in a pot is a bit different. Generally, you'll need to increase your watering frequency, as the soil in a pot can heat up and dry out a bit faster than ground soil. As such, you should plan to water a container-grown Watersprite a few times per week in most cases, versus just once per week for an in-ground plant.

There are a few different ways you can go about determining how much water to give to your Watersprite. Some gardeners choose to pick their water volume based on feeling the soil for moisture. That method suggests that you should water until you feel that the first six inches of soil have become moist. Alternatively, you can use a set measurement to determine how much to water your Watersprite. Typically, you should give your Watersprite about two gallons of water per week, depending on how hot it is and how quickly the soil becomes dry. However, following strict guidelines like that can lead to overwatering if your plant requires less than two gallons per week for whatever reason. When growing Watersprite in a container, you will need to use a different method to determine how much water to supply. Typically, you should give enough water to moisten all of the layers of soil that have become dry. To test if that is the case, you can simply stick your finger in the soil to feel for moisture. You can also water the soil until you notice a slight trickle of excess water exiting the drainage holes of your pot.

It can be somewhat difficult to avoid overwatering your Watersprite. On the one hand, these plants have relatively deep roots that require you to moisten the soil weekly. On the other hand, Watersprite are plants that are incredibly susceptible to root rot. Along with root rot, your Watersprite may also experience browning as a result of overwatering. Underwatering is far less likely for your Watersprite as these plants can survive for a while in the absence of supplemental watering. However, if you go too long without giving this plant water, it will likely begin to wilt. You may also notice dry leaves.

You can expect your Watersprite’s water needs to increase as the season moves on. During spring, you should water about once per week. Then, as the summer heat arrives, you will likely need to give a bit more water to your Watersprite, at times increasing to about three times per week. This is especially true of Watersprite that grow in containers, as the soil in a container is far more likely to dry out faster than ground soil when the weather is warm. In autumn, while your Watersprite is still in bloom, it may need a bit less water as the temperature has likely declined, and the sun is no longer as strong as it was in summer.

Watersprite will move through several different growth stages throughout the year, some of which may require more water than others. For example, you will probably start your Watersprite as a seed. While the seed germinates, you should plant to give more water than your Watersprite will need later in life, watering often enough to maintain consistent soil moisture. After a few weeks, your Watersprite will grow above the soil and may need slightly less water than at the seedling phase. Then, once this plant is mature, you can begin to use the regular watering frequency of about once per week. As flower development takes place, you may need to give slightly more water to aid the process.

There are several reasons why most Watersprite grow outdoors rather than indoors. The first is that these plants typically grow to tall. The second reason is that Watersprite needs more daily sunlight than most indoor growing locations can provide. If you are able to provide a suitable indoor growing location, you may find that you need to give your Watersprite water a bit more often than you would in an outdoor growing location. Part of the reason for this is that indoor growing locations tend to be a lot drier than outdoor ones due to HVAC units. The other reason for this is that soil in containers can dry out relatively quickly as well compared to soil in the ground.

Watersprite is a kind of annual plant so it doesn't need much pruning. You only need to cut off and clean the diseased, yellow or dropped leaves and stems during its growing period. This will help your Watersprite to stay away from pathogens infection.

During the growth of the plant, yellowing, drying and spotted leaves are produced, and these spotted and discolored leaves need to be trimmed off. If the whole piece of leave is discolored or infected, you will need to cut it off completely. In other situations, you will only need to cut off the discolored or infected part on certain leaves. Watersprite above the ground will die and dry up in the winter, and the dead plants need to be cleaned up.

Watersprite leaves are delicate, so take care not to score or bruise them. Unless the leaves are withered or heavily discolored, do not prune the leaves from the lowermost branches unless they’re damaged. They typically grow the largest, so they supply the plant with critical energy to keep it growing right. Please prevent the wounds from water after pruning until they are fully recovered. Remember always sterilize the tools before pruning. When the pruning is finished, please throw all the waste leaves and stems into the trashbins to avoid diseases and bugs.

Sterilize all the tools before pruning; unclean tools will pass pathogens to the plant through wounds; Prune on sunny days because the new cuts will be infected by pathogens if they're distained by rain or water. Throw all the waste leaves and stems into trashbins, they will easily rot and attract diseases and bugs

Expect to prune your Watersprite every week if it’s growing well or every two weeks if it grows slowly. It is always good to prune it on sunny days because if you prune it on rainy days, the rainwater will distain the cuts and cause the whole plant to be infected.

Because Watersprite is an annual plant, the pruning should take place basically during the seasons that the plant grows rapidly. During the growth of the plant, yellowing, drying and spotted leaves are produced, and these spotted and discolored leaves need to be trimmed off.

You must expose the plants to at least 6 to 8 hours of sunlight daily. They prefer more exposure to the morning light, especially in the summer. The Watersprite needs full sun and more sunlight that it can get. The more light these species get, the more they can manufacture food, produce beautiful blooms, and survive.

The Watersprite grows best under full sunlight. It's best not to crowd them together so they can get exposure to the sun evenly. The leaves shouldn't be starved with sunlight. If planted in pots, try to expose the herbaceous flowers in windows with direct sun and ensure they receive full sunlight regardless of the months. They don't tend to do well in partial or filtered light as this will not produce strong stems and healthy flowers. It's best if the Watersprite is always exposed to the sun.

When the temperature rises above 90℉(32℃), the Watersprite can get damaged by extreme temperatures, especially if they are exposed to many hours of sun. It's always ideal for providing some shade from the light in the afternoon in the summer. It's always important to keep in mind that the sunlight in the summer is stronger than the one in the winter. Sunlight exposure is also 50% longer in the summer than in the winter. If the Watersprite is too stressed with sunlight, you might want to keep them fully hydrated. Water them when the top of the soil is about 2 inches dry, and move the plants indoors if it's too hot outside. This is the case if they are planted in containers. It can be normal for the plant leaves to wilt during the day. Generally, they can recover at night. However, when you notice that the Watersprite is still drooping, this means that the plant is losing water fast, and you need to water them.

The Watersprite does not need any protection from the sun. In fact, they love the sun, and some species are heliotropic. Plant them in south-facing gardens whenever possible so they can be exposed from morning to afternoon. While the sun can benefit them, some may experience a sunburn. You might offer protection from the afternoon and midday sun through a shade of a tree or a wall. Growing the Watersprite in shady areas is impossible because the larger flowers would require a lot of energy to grow and produce. Always provide the lighting conditions and set them in an area with full sun for best results.

When the Watersprite does not get adequate sunlight, or they are not placed in full sun locations, it's worth noting that the photosynthetic process will slow down. A lack of sunlight will cause the stems to become more leggy since they become thin and long since they tend to seek too much sunlight. They will not bloom and produce seeds in the shade. Inadequate sunlight will also mean that the older leaves can die, the color of the new ones is lighter than the old foliage, and the new growth is smaller than the last ones. The Watersprite indeed loves the sun so much. However, they can wilt when exposed to excessive heat and ultraviolet light during the extreme summer months, so be careful. You might want to cover them with a net that has a green shade, especially in the summer, to prevent the leaves and the flowers from scorching. When they are indoors, reduce the heat with the help of a fan.

When the Watersprite is growing, they need more light than their mature counterparts. The younger ones should receive adequate light, but they might not be prepared for sudden full sunlight, especially if they are grown in a nursery. They can be more sensitive to the summer sun, so the lighting should be gradual and slow.

During summer or late spring, the Watersprite needs 6 to 8 hours of direct light every single day. This is whether they are planted outdoors. If the Watersprite is planted in pots or you're growing them in the winter, they need direct fluorescent lights that help them grow better. Make sure to place them in an indoor area where they are facing south or east so they can have enough sunlight for photosynthesis.

When transplanting the plants, they should not be exposed to sudden sunlight. Give the Watersprite to grow and mature before transplanting outside. Some species of herbaceous plants can grow taller and might cast a shade on other young plants. Allow between 80 to 100 days of growing season before planting another batch to ensure that every plant receives more than enough sunlight for at least 6 hours a day. Make sure that the Watersprite receives the best light possible, especially if it's planted in a nursery. These are sun-loving plants, but too much sunlight with a very hot temperature is also detrimental to their growth. Indoor lights should be replaced with natural sunlight as much as possible since these species crave this every day.

For this tropical plant to thrive, you’ll want to keep them between 75℉ and 90℉ (25-32℃). Each species can handle temperatures outside of this range, but keeping it within several degrees of these limits will ensure they grow to their maximum potential. As for its extreme temperature limits, any environment below 50℉ (10℃) or above 95℉ (35℃) will begin to hinder its growth and cause various aberrations to its leaves and stems. This is especially true with low temperatures; even a light frost can cause your tropical plants to perish. Cellular death can begin to happen at a rapid pace, with some species dying in as little as 12 to 24 hours.

While Watersprite doesn’t require any changes in temperature to enter different growing phases, it is important to stay consistent. Wild temperature fluctuations can slow down its growth regardless of its current phase, so it's always better to keep them in a controlled environment. That optimal temperature range of 75℉ and 90℉ (25-32℃) is vital to maintain, especially staying above the lower limit. Going above 90℉(32℃) isn’t ideal, but as tropical plant it won’t suffer too much. On the other hand, going below 50℉ (10℃) (and especially 40℉/5℃) will begin to directly damage this heat-loving plant species.

Watersprite does not need different temperatures for different growing seasons. The most important step in seasonal care is to keep the environment within the optimal temperature range. That's why it's always best to keep this plant indoors. That way, you can control the temperature no matter what the climate is like outside. Light is also important for tropical species, with all of these plants preferring a partial side level of sun exposure. This means any light they receive needs to be dappled or filtered, with bright but indirect light being the best option when growing your plants indoors. Too much direct sunlight can negatively affect your plant’s leaves, reducing its growth potential.

Tip #1: Don’t Leave Your Plant Near Windows in Colder Months If you want to make sure your plant isn’t exposed to colder temperatures, you may want to keep them away from windows. In colder months like late fall and winter, even the smallest draft can leak cold air into your home through cracks in your windows. While this air usually dissipates and warms up as it travels throughout your home, any plants placed in close proximity to the window will be affected. Move your tropical plants into an area where they will still get bright but indirect light, while making sure they won’t be affected by potential drafts. Tip #2: If You Find Dry Patches, Your Plant May Be Getting Too Much Sunlight or Heat You may notice the leaves become white or even scorched on a sunny day. These discolorations and unusual markings usually indicate that a plant is getting too much heat or sunlight, and it may be dehydrated. Excess light and heat will dry out the soil, stopping plants from getting the moisture they need to support their cellular structure. It also slows down or stops the process of photosynthesis, further hindering growth. If ignored for too long, these dry spots can spread and eventually result in the death of your plants. Tip #3: Avoid Frost at All Costs Colder temperatures and frost can damage your plants by causing ice crystals or disrupt normal physiological activity. This makes it nearly impossible for water to move freely throughout plant tissue, creating a deficit of moisture in their stems and leaves. You can tell a plant has been damaged by frost if it begins to suffer from hydrosis (it will appear as though it's soaked with water.) If the problem persists, your plants may begin shriveling and turning a dark brown or black hue. After that, the plant will almost certainly die.

The best way to maintain the right temperature range for Watersprite is by keeping an eye on both the climate and humidity. You’ll want to try to keep each species in a room where you have access to climate control, keeping the heat in the temperature range best mimics its natural habitat. The humidity levels will also have a direct effect on temperature, so it's important to monitor these as well. You can artificially raise the humidity of your growing space by using a humidifier or lightly misting the leaves with water. If you intend to grow this species outside, you may find it difficult to maintain the right balance of temperature and humidity. If temperatures begin to drop or the air becomes too dry, your best option is to find room within your home and move your plant inside. An indoor growing space will allow you to control the climate more closely, helping your plant reach its full potential.

All plants need nutrients to grow, but some types are able to take what they need and don’t need any supplementation with fertilizers. Watersprite, like other plants, use nutrients to support growth and all internal processes. Each of the main nutrients that plants use (nitrogen, phosphorus, and potassium) contribute to one or more of a plant’s essential functions, and in the case of foliage it is nitrogen that provides the most support. It can be difficult for a Watersprite to get enough nitrogen from the soil, which is why many gardeners prefer to supplement by feeding Watersprite with a source of nitrogen.

Watersprite generally grows well, but a fertilizer can be applied about once a month to give the plant a boost when it is actively growing. You should fertilize Watersprite about once a month only during the spring and summer months, but not during fall and winter when it becomes less active and does not use as many nutrients. You’ll know when to start fertilizing Watersprite if you see signs of new growth. The fertilization schedule remains the same whether the plant is grown outside or indoors in a container. However, if your Watersprite is in a container, you probably will not need to fertilize for the first one to two months. Potting soil made for container plants already contains plenty of nutrients, so you should only start to fertilize after your plant has been in the same soil for a while.

Never fertilize your Watersprite if it is not healthy, for example if it has developed a disease or has insect pests on it. Also do not fertilize a dehydrated plant, since the fertilizer will make this problem even worse. Only fertilize healthy plants. Do not splash fertilizer onto the leaves or stem of this plant when watering, since it can cause burned spots. Be careful not to allow the fertilizer to make direct contact with the plant, unless you are usually a special fertilizer designed to be applied to the foliage.

Fertilizers contain high levels of nitrogen, potassium and phosphorus, along with other essential nutrients such as iron, manganese and zinc. These are all necessary elements that promote growth in Watersprite. A balanced fertilizer works well for Watersprite, for example an all-purpose fertilizer with a 10-10-10 NPK number. For natural fertilizers, blood meal or worm castings work well. You may also choose a fertilizer that is higher in nitrogen than other nutrients, such as fish fertilizer. Nitrogen provides support to leaves, which are the main feature that people want from Watersprite. There is no point in providing a lot of supplements for flowers or seeds if that is not your purpose in growing the plant.

Apply fertilizer based on the instructions on the particular type you have purchased. It is generally a good idea to start with half-strength fertilizer to avoid accidentally over-fertilizing your Watersprite. Since this plant requires frequent fertilization, it is common to accidentally fertilize too much. Remember that it’s always easier to add more fertilizer than it is to try to save an over-fertilized plant. Don’t apply fertilizer to dry soil - it should already be at least somewhat moist before fertilizing. This helps the fertilizer absorb more easily and helps avoid fertilizer burn. You should also water after applying dry fertilizers to your soil. Some fertilizers are meant to be mixed into the soil when planting, while others are applied on top of the soil and then watered in. For most types of Watersprite, a water soluble fertilizer is an easy choice. Simply mix the fertilizer solution into your watering can at the recommended dosage for Watersprite and then water the plant as usual. Slow-release granules or fertilizer spikes can also work well if you prefer not to remember to fertilize monthly.

Over-fertilization leads to a build-up of salts in the soil which leads to a lack of vitality overall and pale coloration in the leaves. Leaves may also wilt or develop brown tips as the excess salt from the fertilizer tries to make its way out of the leaves. Too much fertilizer makes it impossible for the plant to take up water and nutrients, which will eventually kill it if you don’t take steps to save your Watersprite. If the Watersprite is in a container, you could either remove it from the pot and repot it in fresh potting mix, or flush out the soil by running a lot of water through and letting it drain out thoroughly. If your Watersprite is outdoors, the same theory applies, although it can be more difficult to flush outdoor soil. Water thoroughly and hold off on fertilizing again for a while. You may want to perform a soil test before you add any more fertilizer to make sure you don’t provide too much of any one nutrient.