About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
Distribution
More Info
Related Plants
Related Articles
Add to My Garden Bear's paw
Cotyledon tomentosa
Bear's paw is a succulent evergreen shrub endemic to South Africa with thick, fuzzy leaves with noticeable "teeth" at their tips. During the spring, it blooms with huge orange bell-shaped flowers. The leaf of this plant turns a deep red when disturbed or agitated externally. Bear's paw is toxic to animals, pets, and people. 
Water
Every 2-3 weeks
Sunlight
Full sun
Care Guide for Bear's paw
As succulents, Bear's paw plants require little water. During the spring through fall, give these succulents enough water to soak through the soil, but then allow the soil to dry out completely before watering again. Never allow the roots to stand in water since they will rot.
Fertilize the bear's paw during the spring and summer months, on a biweekly basis. Apply a mineral, water-soluble fertilizer to make sure fertilizer is absorbed well, but don't get any on the paws. Avoid fertilizing in dormant winter months or when the weather turns freezing.
Trim the diseased, withered leaves once a month.
Flower Pots
Full sun, Partial sun
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Scan QR code to download
Bear's paw
Water
Every 2-3 weeks
Sunlight
Full sun
Hardiness Zones
9 to 11
Planting Time
Early spring
Download and print this plant care card and attach it to your plants
Download
Bear's paw
Water
Every 2-3 weeks
Sunlight
Full sun
Hardiness Zones
9 to 11
Planting Time
Early spring
Download
Bear's paw
Water
Every 2-3 weeks
Sunlight
Full sun
Hardiness Zones
9 to 11
Planting Time
Early spring
Download
Questions About Bear's paw
Watering 
Sunlight 
Temperature 
Fertilizing What is the best way to water my Bear's paw?
The proper way to water Bear's paw requires some timing. For example, you should wait until the spring, when the new leaves are beginning to grow, before considering adding water to this plant’s pot. Once that season arrives, you can add water when the soil inside the pot has become entirely dry. When watering, you can use either tap water or distilled water. It's best not to water this plant from overhead. Instead, you should water at the base of the plant by applying the water slowly and evenly across the entire surface of the soil. This method will allow you to moisten all parts of the soil consistently without dampening the above-ground portions of the plant, which your Bear's paw will appreciate. Typically, you can continue adding water until you notice a light stream of excess water draining from the pot’s hole.
Read More ![more]()
What should I do if I water my Bear's paw too much or too little?
An overwatered Bear's paw is a far more common occurrence than one that is underwatered. Overwatering is also incredibly detrimental to your plant's health as it can cause one Bear's paw to die quite quickly. One way to avoid overwatering is to allow the soil to dry entirely before adding water, as mentioned previously. Especially when it turns into dormancy, lots of people will just water it in the wrong way. As such, we’ll focus on how to remedy the problem of overwatering. When your Bear's paw shows signs of overwatering, it is often best to remove it from its current pot. After removal, you should access the roots of this plant and remove any that show signs of rot or some other moisture-related disease. While some roots should be removed, others will return to full health after a simple cleaning. After this stage, you should repot your Bear's paw in soil that has excellent drainage capabilities to lessen the odds of future overwatering.
While unlikely, underwatering can take place too. If that occurs for you, all you need to do is supply your plant with water on a slightly more frequent basis, ensuring that you don't overcorrect the issue and end up overwatering your plant.
Read More ![more]()
How often should I water my Bear's paw?
As a succulent plant, the water needs of Bear's paw are quite low compared to most other plants because this plant hails from a region that is constantly hot and dry.
To give this plant species proper care, you should allow its soil to dry out completely between waterings.
Typically, it will take anywhere from two weeks to a month for the soil to dry entirely, at which time you can add water. Watering frequency tends to be very seasonally related. During the spring to summer period, it will be in a growing state and it may take 2-3 weeks for the soil to dry completely, you can follow this watering frequency. During the summer time, the soil may dry out faster. However, when the temperature falls below 60 degrees or rises above 85 degrees Fahrenheit, most of them will be dormant or semi-dormant, which means that the plant does not need more watering at the moment. Instead, you should reduce or even stop watering to keep the soil dry until the temperature is appropriate again for Bear's paw to grow, and then restart watering.
Read More ![more]()
How much water does my Bear's paw need?
Overall, Bear's paw does not need a high volume of water. This is mainly due to the fact that this plant must go for a while without receiving water. However, when the time to water this plant does arrive, you should be ready to give it a lot of water. While there is no set amount of water to give this plant, you should not stop watering until the soil is completely moist. The best way to ensure this is the case, provided you grow this plant in a pot, is to water it until you see water trickling through the drainage holes at the bottom of the pot. You can also insert a pencil or some similar object deep into the soil to test if you have watered enough. If you remove the pencil and it is moist, then you have provided enough water.
Read More ![more]()
How can I tell if i'm watering my Bear's paw enough?
Generally, overwatering is a far more significant issue than underwatering is. When overwatering occurs, you should notice right away as the leaves will begin to lose their form, become mushy, and change colors. This will be a stark contrast to a healthy set of living stone leaves, which should be relatively sturdy and hold their shape. Underwatering is incredibly rare for Bear's paw, as this species can often survive with no water at all. However, if underwatering does occur, you will usually notice leaf discoloration and dryness.
Read More ![more]()
How should I water my Bear's paw through the seasons?
As mentioned, Bear's paw needs the most water during the times of year that it is actively growing. By contrast, in winter, when the plant is entirely dormant, you should reduce these already low watering needs. In fact, during winter, you should not water this plant at all. Once spring arrives, wait until your Bear's paws begin to develop new leaves. Once that occurs, you can return to your regular watering schedule. During the hottest parts of summer, your plant may enter another dormant growth phase, which means its water needs will be lower than normal. As summer ends and fall arrives, you can begin reducing your watering in anticipation of winter. By the time winter arrives, you should cease watering altogether.
Read More ![more]()
How should I water my Bear's paw at different growth stages?
By and large, the water needs of Bear's paw will remain consistent throughout each of its growth stages. Anyway, Bear's paw prefers dry soil conditions more than moist ones, so watering less is safer for it than watering a lot. However, there are some phases in which your Bear's paw may need slightly more water than usual. Despite being known for their foliage, Bear's paws can also provide flowers, but these flowers do not arrive until the plant is at least a few years old. Once flower development is possible, your Bear's paw may need a minimal uptick in its watering schedule to accommodate flower development. Otherwise, you should not expect to change your watering frequency significantly based on this plant’s growth stages.
Read More ![more]()
What's the difference between watering Bear's paw indoors and outdoors?
Growing Bear's paws outdoors is not an option for most gardeners in hardiness zones colder than zone 9, as this plant loves areas that have warm or hot weather year-round. Only in regions that do not have yearly temperatures that fall below 40 degrees Fahrenheit can this plant species survive. If you live in such an area, you should study the average rainfall in your area as well. If you live where it rains often, your Bear's paw will likely die from overwatering. But if you live in a warm climate in which it rains occasionally, you may not need to water your Bear's paws at all.
Those who live in cooler areas of the world should have no issue growing this plant indoors. If that is the approach you take, you can wait until all of the soil in your plant's container has dried out while also following the rest of the general watering advice we've laid out in the sections above.
Read More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
More Questions People Also Ask
More About How-Tos
Explore 5 of plant how-tos on Feng shui direction, Water, Lighting, Temperature, Transplant spacing, etc.
Feng shui direction
Northeast
The bear's paw exhibits a harmonious accord with the earth element of the Northeast direction, due to its succulent nature and sturdy leaves, symbolizing grounding and permanence. This Feng Shui compatibility might enhance stability and wisdom in a room. As with any Feng Shui advice, individual results may vary.
Water
Every 2-3 weeks
Bear's paw prefers well-drained soil and infrequent watering. Originating from arid habitats, it thrives with moderate moisture and occasional drought. Its succulent leaves store water, so avoid overwatering to prevent rot. Adjust watering schedules during seasonal shifts to mimic its natural environment.
Lighting
Full sun
Bear's paw fares well under extensive sunlight exposure, simulating its native habitat where daylight is plentiful. It can adapt to moderate light from shedding more intense rays, although the plant's health may be somewhat affected. Too much or too little light can hinder its growth or cause sunburn.
Temperature
10 to 35 ℃
Bear's paw is native to regions with warm temperature ranging from 20 to 38 ℃ (68 to 100 ℉). It prefers warm temperatures and thrives best in sunny, dry climates. During winter, it's best to provide the plant with a slight decrease in temperature, possibly around 18℃ (64℉) to encourage dormancy.
Transplant spacing
6-8 inches
The perfect time to transplant bear's paw is from early summer to mid-fall, offering optimal growth conditions. Choose a sunny spot with well-draining soil, and ensure the plant isn't over-watered. With these considerations, transplanting bear's paw will be a delightful experience for both the plant and the gardener!
Common Pests & Diseases
Common issues for Bear's paw based on 10 million real cases
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Solutions: Each source of scarring requires a different approach to help your plant recover. Protect the trunk and leaves from physical damage like scrapes. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs. Frequent leaf or bud loss may be due to insufficient light or nutrients.
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Solutions: Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed. Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn. Introduce appropriate artificial lighting. Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Black spot
Infection by the black spot pathogen causes black spots or patches to appear on leaves.
Solutions: Some steps to take to address black spot include: Prune away any infected leaves, cleaning the pruners between plants with a 10% bleach solution so that the fungus does not spread to healthy leaves. Don't compost pruned plant parts as the spores can linger in the soil for a long period of time - instead, dispose of them in the trash. Use an approved fungicide such as Trifloxystrobin, Chlorothalonil, Maneb, or Myclobutanil. Use a spreader in the fungicide spray to ensure better coverage.
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Solutions: If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Stem rot
Bacterial infection can cause the stems to become soft and rotten.
Solutions: If the plant is only infected a little, it can sometimes be saved. This mainly applies to houseplants that are grown in pots. Here's what to do. Remove the plant from the pot and gently shake off as much soil as possible. Using pruning tools that have been disinfected, remove any diseased foliage and roots. Be sure the new pot has good drainage holes and wash it with one part bleach and nine parts water to ensure that it is completely clean and sanitized. Dip the plant's roots in fungicide to kill off any remaining fungal spores before potting into the clean growing medium. Only water the plant when the top inch of the soil is dry and never let the plant sit in water. For plants that are grown in the ground, it's best just to remove the infected plants and destroy them. Do not plant in the same spot until the soil has been allowed to dry out and has been treated with a fungicide.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Symptom Analysis
Scars form when the plant repairs wounds. They can be the result of people or pets passing by and scraping the plant. Once the underlying issue is resolved, the plant will heal but a scar may remain.
Pests and pathogens can also cause scarring. Insects may attack the plant for a meal, resulting in extensive scarring when a few invaders turn into an infestation. Diseases such as fungus and bacteria can weaken the plant, causing brown spots, mushy areas, or blisters that lead to scars.
Scars occur on stems when a leaf or bud has been lost and the plant has healed. The harder tissue is like a scab that protects a wound.
On other occasions, scars can signal problems from environmental conditions, such as overexposure to sunlight or heat. It might surprise you to know that plants can suffer from sunburn, even desert dwellers like cactus!
Solutions
Each source of scarring requires a different approach to help your plant recover.
- Protect the trunk and leaves from physical damage like scrapes.
- If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray.
- Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs.
- Frequent leaf or bud loss may be due to insufficient light or nutrients.
Prevention
Preventing some sources of scarring is easier than others, but all start with careful attention to your plants once you decide to bring them home.
- Review specific guidelines for your plant, including soil drainage, watering, and fertilizer requirements.
- Inspect plants before planting and use sterile pots and fresh potting soil or media to limit transfer of fungi or bacteria.
- Once established, check your plants regularly for signs of scarring or the presence of pests, as it is better to catch problems as early as possible.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Overview
All plants require light, and if they do not receive it in the quantities that they require this distorts their growth in a process known as etiolation. In essence, etiolated plants are diverting all of their energy to growing taller in a desperate attempt to reach a position where they can meet their light requirements. Many other growth factors are harmed by this, and so light-deprived plants can become weak and distorted until they are almost unrecognizable. Low light symptoms are most commonly seen in houseplants, but outdoor specimens can also be affected.
Symptom Analysis
Although symptoms will vary in different plants, the general symptoms of low light are easy to spot.
- Plant stems grow tall and lanky.
- There are less leaves, and both leaves and stems tend to be pale and insipid looking. This is due to a shortage of chlorophyll.
- All plant parts become weakened and may droop, as energy is diverted toward too-fast growth as the plant stretches itself toward any source of light.
Disease Cause
Plants need sunlight in varying amounts for photosynthesis – a process that produces energy for growth and fruit and flower production. Low light causes a plant to divert all energy to upward (apical) growth in order to find better light. Plant hormones called auxins are transported from the actively-growing tip of the plant downwards, to suppress lateral growth. A drop in cellular pH triggers expansins, nonenzymatic cell wall proteins, to loosen cell walls and allow them to elongate. This elongation results in the abnormal lengthening of stems, especially internodes, or plant "legginess" which is observed in etoliated plants.
Solutions
Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed.
- Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn.
- Introduce appropriate artificial lighting.
- Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Prevention
To avoid etiolation, provide an adequate amount of light from the beginning.
- Choose a location that matches each plant's ideal light needs. Many indoor plants do best in or near a south-facing window, which will provide the longest hours of sunlight. Flowering plants and those with colored leaves typically need more light than purely-green plants, as photosynthesis occurs in the green portions of leaves.
- Select plants with light needs that match a location's conditions. Some cultivars and varieties require less light than others.
- Use a grow light. Darker locations may require artificial illumination. A grow light may also become more necessary during winter, when sunlit hours are at their shortest.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Black spot
Infection by the black spot pathogen causes black spots or patches to appear on leaves.
Overview
Black spot is a fungus that largely attacks leaves on a variety of ornamental plants, leaving them covered in dark spots ringed with yellow, and eventually killing them. The fungus is often simply unsightly, but if it infects the whole plant it can interfere with photosynthesis by killing too many leaves. Because of this, it is important to be aware of the best methods for preventing and treating this diseases should it occur in the garden.
Symptom Analysis
Here are a few of the most common symptoms of black spot:
- The plant has developed small black spots along the leaves.
- These spots be small, circular, and clustered together, or they may have a splotchy appearance and take up large portions of the leaves.
- The fungus may also affect plant canes, where lesions start purple and then turn black.
- The plant may suffer premature leaf drop.
Though most forms of black spot fungus pose little risk to a plant's overall health, many gardeners find them unsightly. Severe cases can also weaken a plant, so it becomes more susceptible to other pathogens and diseases.
Disease Cause
Black spot is spread by various types of fungi, which differ slightly depending on whether they are in their sexual or asexual stages.
The fungal spores linger over the winter in fallen leaves and lesions on canes. In the spring, the spores are splashed up onto the leaves, causing infection within seven hours of moisture and when temperatures range between 24 to 29 ℃ with a high relative humidity.
In just two weeks, thousands of additional spores are produced, making it easy for the disease to infect nearby healthy plants as well.
There are several factors that could make a plant more likely to suffer a black spot infection. Here are some of the most common:
- Exposure to infected plants or mulch (the fungus overwinters on dead leaves)
- Weakening from physical damage, pest infestation or other infections.
- Increased periods of wet, humid, warm weather – or exposure to overhead watering
- Plants growing too close together
Solutions
Some steps to take to address black spot include:
- Prune away any infected leaves, cleaning the pruners between plants with a 10% bleach solution so that the fungus does not spread to healthy leaves.
- Don't compost pruned plant parts as the spores can linger in the soil for a long period of time - instead, dispose of them in the trash.
- Use an approved fungicide such as Trifloxystrobin, Chlorothalonil, Maneb, or Myclobutanil.
- Use a spreader in the fungicide spray to ensure better coverage.
Prevention
Here are a few tips to prevent black spot outbreaks.
- Purchase resistant varieties: Invest in fungus-resistant plant varieties to reduce the chances for black spot diseases.
- Remove infected plant debris: Fungi can overwinter in contaminated plant debris, so remove all fallen leaves from infected plants as soon as possible.
- Rake and discard fallen leaves in the fall.
- Prune regularly.
- Water carefully: Fungal diseases spread when plants stay in moist conditions and when water droplets splash contaminated soil on plant leaves. Control these factors by only watering infected plants when the top few inches of soil are dry, and by watering at soil level to reduce splashback. Adding a layer of mulch to the soil will also reduce splashing.
- Grow plants in an open, sunny locations so the foliage dries quickly.
- Follow spacing guidelines when planting and avoid natural windbreaks for good air circulation.
- Use chemical control: Regular doses of a fungicide, especially in the spring, can stop an outbreak before it begins.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Overview
Regardless of the type of plant or where it is grown, at some point, it will begin to aged yellow and dry. This is a natural, unavoidable process that happens when the plant has completed all of the steps in its life.
Annual plants go through this process at the end of a single growing season. Perennial plants live for multiple years, if not tens or hundreds of years, but will still ultimately exhibit these symptoms.
Symptom Analysis
When plants have progressed through their natural developmental stages and are nearing the end of their lifecycle, they begin showing signs of decline. Leaves will start to yellow and droop, and over time they turn papery brown and dry.
Once completely dry, the leaves begin to fall from the plant until the entire plant has dried out.
Disease Cause
At the end of its life, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence or natural aging and death. Cell division stops, and the plant begins catabolizing resources to use in other parts of the plant.
As this happens, the tissues begin yellow and drying until the entire plant is desiccated and perishes.
Solutions
If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Prevention
Unfortunately, there is no way to prevent plants from dying of “old age.” To help prolong their life, and put off symptoms of aged yellow and dry for as long as possible, take care of them by giving them enough water, fertilizing them appropriately, and making sure they get enough sunlight.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Stem rot
Bacterial infection can cause the stems to become soft and rotten.
Overview
Stem rot is a serious disease and can affect many different types of plants. it can be particularly prevalent when the temperature of the soil is over 16 ℃ and there's a lot of moisture in the soil. This could be from unusually heavy rainfalls or too much irrigation. Once stem rot sets in, it's very difficult to get rid of the disease and most affected plants will have to be discarded. This is especially the case for vegetables, herbs, and other herbaceous plants that have soft stems. This is why it's important to ensure that the soil used for growing these plants is well-drained and that overwatering is avoided. Using good cultural practices also help in curbing these types of fungal diseases.
Symptom Analysis
Plants that have been affected by stem rot will first display a yellowing of the lower leaves. This is followed by obvious wilting and stunted growth.
If the stem of the affected plant is examined closely, there will be some dark discolorations starting near the base and moving upward. If the roots of affected plants are examined, they will appear dark and mushy instead of white and healthy-looking. Eventually, the entire plant will wilt and die.
Disease Cause
Stem rot is caused by a variety of soil-borne fungus pathogens. The type of fungus depends on the species of plant that is affected. Two fungi responsible for stem rot are Rhizoctonia and Fusarium. These fungal pathogens live in soil and migrate to the plant when conditions are optimum. This includes warm, humid weather and excessive soil moisture. Commonly, vegetable seedlings are affected by these fungi.
Sclerotinia sclerotiorum is another fungus that causes stem rot in plants. This fungus has a host range of over 350 different species of plants. Plants most susceptible to this fungus include many vegetable varieties such as cucumbers, beans, cilantro, carrots, cabbage, melons, lettuce, peas, onions, tomatoes, pumpkins, and squash. This fungus can produce different symptoms in different species. In some cases, the fungus causes irregular spots on stems and other plant material that appear water-soaked. On other plant species, the fungus appears as dry lesions that grow and girdle the stem of the plant.
The third type of fungus that causes stem rot is Phytophthora capsici. Plants that belong to the cucumber family are most susceptible to this fungal infection. This fungus manifests as water-soaked lesions on the stems that then turn brown and girdle the stem.
All of these fungal pathogens are transmitted to the plant by water splashing from the soil up onto the plant. That's because the fungal spores live in the soil where they wait for the right conditions to infect the plants.
Solutions
If the plant is only infected a little, it can sometimes be saved. This mainly applies to houseplants that are grown in pots. Here's what to do.
- Remove the plant from the pot and gently shake off as much soil as possible.
- Using pruning tools that have been disinfected, remove any diseased foliage and roots.
- Be sure the new pot has good drainage holes and wash it with one part bleach and nine parts water to ensure that it is completely clean and sanitized.
- Dip the plant's roots in fungicide to kill off any remaining fungal spores before potting into the clean growing medium.
- Only water the plant when the top inch of the soil is dry and never let the plant sit in water.
For plants that are grown in the ground, it's best just to remove the infected plants and destroy them. Do not plant in the same spot until the soil has been allowed to dry out and has been treated with a fungicide.
Prevention
For outdoor gardens:
- Raking the garden thoroughly in the springtime will help to cut down on pathogens that may be living in the soil.
- Using a copper fungicide on plants in the springtime will cut down on fungal growth and prevent the spread of infection.
- Placing a heavy layer of mulch on top of the soil will also prevent pathogens from splashing up onto the stems of plants.
- Place plants at the recommended spacing to encourage better air flow between them.
- Water plants at the base instead of overhead to prevent excessive moisture on foliage.
For indoor plants:
- Avoid overwatering houseplants and ensure the roots do not sit in water.
- Make sure that indoor plants receive adequate air circulation and light.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Distribution Map
Habitat
Arid thicket, slopes of sheltered ravines
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info
Plant Type
Succulent, Herb
Flower Color
Red
Yellow
Green
Orange
Bloom Time
Spring
Leaf Color
Green
Red
Name story
Bear's paw
Cotyledon tomentosa, native to Africa, produces large chunky ovate fuzzy green leaves with prominent "teeth" at the tips that give the impression of the bear's paws. Hence, the resemblance inspires the name, the bear's paw.
Symbolism
Towery, soft, messy
Usages
Garden Use
Bear's paw is a unique-looking species of succulent chosen by many gardeners in Mediterranean and desert climates for its glossy, paw-shaped leaves and small but pretty flowers. It is usually planted in low borders, succulent gardens, or rock gardens.
Scientific Classification
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Related Plants
Pocketbook plant
Pocketbook plant is named for the shape of its purse-like blooms. This annual is most often grown as a houseplant with bright indirect light. However, it can also be grown in flowerbeds outside.
Bloom Time
Summer
Pinkladies
Pinkladies natives to the grasslands in the Central United States but spread outside its native states quickly. Today, it has been naturalized in a total of 28 states in the US and spreading as far south as Chihuahua and Coahuila in Mexico. Pinkladies is commonly used as an ornamental ground cover plant but escaped out from the gardens quickly.
Bloom Time
Summer
Garden Usage
The genus Oenothera is characterized by sturdy plants that can grow in various conditions, commonly used for ornamental and landscaping purposes. They originate from the Americas and can be found anywhere from temperate to subtropical regions. Their size varies according to the species, and can be anywhere between 10 cm and 3 m., Their flowers are usually yellow, while different species have white, pink, red, or purple flowers. The flowering period lasts from the end of the spring to the end of the summer, and flowers bloom in the evening. The most popular species used in gardening is Oenothera biennis.
Pink rain lily
Pink rain lily (Zephyranthes carinata) is a perennial evergreen plant that can grow to be approximately 30 cm tall and 15 cm wide. It blooms from late spring to summer with white, pink or orange crocus-like flowers. It grows from a bulb and should be planted where it will get afternoon shade.
Bloom Time
Summer, Autumn
Garden Usage
Pink rain lily is a small, easy-to-care-for perennial flower. It is perfect for planting around other established perennials and will spread without harming other plants. It also works excellently in borders. You will find varieties with yellow, pink, orange, or white flowers that range from 15 to 30 cm tall. It flowers in late summer and early fall, adding a burst of color to your garden as other plants are finishing up for the season. Some varieties also attract nighttime pollinators to the garden.
Pink rain lily
Pink rain lily (Habranthus robustus) is a plant species native to Brazil. Pink rain lily blooms four to six times in a single summer. This species has blossoms that often bloom right after a rainstorm. Pink rain lily grows equally well in shaded areas and areas with plenty of sun.
Bloom Time
Summer
Pink rain lily
The pink rain lily (Zephyranthes rosea) is a delightful bulb addition to perennial gardens anywhere, although they are native to the tropics. Unlike other flowers of your landscape, the pink rain lily will only put on a floral show after a period of heavy rain. Of course, this can be mimicked with a heavy watering or proper irrigation system.
Bloom Time
Summer
Garden Usage
Pink rain lily is a small, easy-to-care-for perennial flower. It is perfect for planting around other established perennials and will spread without harming other plants. It also works excellently in borders. You will find varieties with yellow, pink, orange, or white flowers that range from 15 to 30 cm tall. It flowers in late summer and early fall, adding a burst of color to your garden as other plants are finishing up for the season. Some varieties also attract nighttime pollinators to the garden.
Ice plant
Ice plant is a small succulent plant. It has uniquely-shaped leaves that are like three-dimensional sickles with small thorns on the ridges which look like tiny monster's teeth. When the plant changes color, its leaf margins can turn pink.
Bloom Time
Spring
Garden Usage
Succulent plants are so popular with people for its low maintenance cost and different but interesting shape. They can be planted in window sills as a potted plant or placed on an office table as a house plant to decorate the environment. They can also be planted in drainable and ventilated corners of courtyard as undershrub to form a unique tropical landscape. They don't need much care, therefore being a perfect choice for busy people.
View More Plants
Related Articles
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow Orange daylily See More The Orange daylily is a perennial plant known for its captivating lily-like blooms. Its natural habitats are meadows and forests, but it is also a common garden plant in temperate regions around the world. Each individual flower lasts only a day, but the plantContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Suggested Plants to Build a Garden That Blooms All the Year Round
Plant Collection Suggested Plants to Build a Garden That Blooms All the Year Round Bearded iris See More BloomTime:Spring The Bearded iris is a flowering plant that appears in many different colors. It is a popular garden plant because it’s easy to grow. Though their native lands are in Europe, Bearded irises are often grownContinue reading “Suggested Plants to Build a Garden That Blooms All the Year Round”
Read More ![more]()
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow China rose See More The China rose (Rosa chinensis) is a Southwest China native. The plant has been cultivated for so long that it has become hard to tell the difference between wild and cultivated varieties. With medium-sized clusters of flowers and a long blooming season, it isContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Suggested Plants to Build a Garden That Blooms All the Year Round
Plant Collection Suggested Plants to Build a Garden That Blooms All the Year Round White mulberry See More BloomTime:Spring A unique and easy-to-grow edible landscaping plant, the White mulberry is prized for its tasty fruits as well as its exquisite ornamental appeal. Originally native to China, this plant was valued for its role in silkContinue reading “Suggested Plants to Build a Garden That Blooms All the Year Round”
Read More ![more]()
View More Articles
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
Distribution
More Info
Related Plants
Related Articles
Add to My Garden Bear's paw
Cotyledon tomentosa
Bear's paw is a succulent evergreen shrub endemic to South Africa with thick, fuzzy leaves with noticeable "teeth" at their tips. During the spring, it blooms with huge orange bell-shaped flowers. The leaf of this plant turns a deep red when disturbed or agitated externally. Bear's paw is toxic to animals, pets, and people.
Water
Every 2-3 weeks
Sunlight
Full sun
Care Guide for Bear's paw
Water
As succulents, Bear's paw plants require little water. During the spring through fall, give these succulents enough water to soak through the soil, but then allow the soil to dry out completely before watering again. Never allow the roots to stand in water since they will rot.
Fertilization
Fertilize the bear's paw during the spring and summer months, on a biweekly basis. Apply a mineral, water-soluble fertilizer to make sure fertilizer is absorbed well, but don't get any on the paws. Avoid fertilizing in dormant winter months or when the weather turns freezing.
Pruning
Trim the diseased, withered leaves once a month.
Potting Suggestions
Flower Pots
Sunlight
Full sun, Partial sun
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
Download
Questions About Bear's paw
Watering Sunlight Temperature Fertilizing What is the best way to water my Bear's paw?
What should I do if I water my Bear's paw too much or too little?
How often should I water my Bear's paw?
How much water does my Bear's paw need?
How can I tell if i'm watering my Bear's paw enough?
Show More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
Download the App
More Questions People Also Ask
More About How-Tos
Common Pests & Diseases
Common issues for Bear's paw based on 10 million real cases
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Solutions: Each source of scarring requires a different approach to help your plant recover. Protect the trunk and leaves from physical damage like scrapes. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs. Frequent leaf or bud loss may be due to insufficient light or nutrients.
Learn More ![more]()
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Solutions: Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed. Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn. Introduce appropriate artificial lighting. Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Learn More ![more]()
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More ![more]()
Black spot
Infection by the black spot pathogen causes black spots or patches to appear on leaves.
Solutions: Some steps to take to address black spot include: Prune away any infected leaves, cleaning the pruners between plants with a 10% bleach solution so that the fungus does not spread to healthy leaves. Don't compost pruned plant parts as the spores can linger in the soil for a long period of time - instead, dispose of them in the trash. Use an approved fungicide such as Trifloxystrobin, Chlorothalonil, Maneb, or Myclobutanil. Use a spreader in the fungicide spray to ensure better coverage.
Learn More ![more]()
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Solutions: If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Learn More ![more]()
Stem rot
Bacterial infection can cause the stems to become soft and rotten.
Solutions: If the plant is only infected a little, it can sometimes be saved. This mainly applies to houseplants that are grown in pots. Here's what to do. Remove the plant from the pot and gently shake off as much soil as possible. Using pruning tools that have been disinfected, remove any diseased foliage and roots. Be sure the new pot has good drainage holes and wash it with one part bleach and nine parts water to ensure that it is completely clean and sanitized. Dip the plant's roots in fungicide to kill off any remaining fungal spores before potting into the clean growing medium. Only water the plant when the top inch of the soil is dry and never let the plant sit in water. For plants that are grown in the ground, it's best just to remove the infected plants and destroy them. Do not plant in the same spot until the soil has been allowed to dry out and has been treated with a fungicide.
Learn More ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App
Scars
Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.
Symptom Analysis
Scars form when the plant repairs wounds. They can be the result of people or pets passing by and scraping the plant. Once the underlying issue is resolved, the plant will heal but a scar may remain.
Pests and pathogens can also cause scarring. Insects may attack the plant for a meal, resulting in extensive scarring when a few invaders turn into an infestation. Diseases such as fungus and bacteria can weaken the plant, causing brown spots, mushy areas, or blisters that lead to scars.
Scars occur on stems when a leaf or bud has been lost and the plant has healed. The harder tissue is like a scab that protects a wound.
On other occasions, scars can signal problems from environmental conditions, such as overexposure to sunlight or heat. It might surprise you to know that plants can suffer from sunburn, even desert dwellers like cactus!
Solutions
Each source of scarring requires a different approach to help your plant recover.
- Protect the trunk and leaves from physical damage like scrapes.
- If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray.
- Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs.
- Frequent leaf or bud loss may be due to insufficient light or nutrients.
Prevention
Preventing some sources of scarring is easier than others, but all start with careful attention to your plants once you decide to bring them home.
- Review specific guidelines for your plant, including soil drainage, watering, and fertilizer requirements.
- Inspect plants before planting and use sterile pots and fresh potting soil or media to limit transfer of fungi or bacteria.
- Once established, check your plants regularly for signs of scarring or the presence of pests, as it is better to catch problems as early as possible.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Overview
All plants require light, and if they do not receive it in the quantities that they require this distorts their growth in a process known as etiolation. In essence, etiolated plants are diverting all of their energy to growing taller in a desperate attempt to reach a position where they can meet their light requirements. Many other growth factors are harmed by this, and so light-deprived plants can become weak and distorted until they are almost unrecognizable. Low light symptoms are most commonly seen in houseplants, but outdoor specimens can also be affected.
Symptom Analysis
Although symptoms will vary in different plants, the general symptoms of low light are easy to spot.
- Plant stems grow tall and lanky.
- There are less leaves, and both leaves and stems tend to be pale and insipid looking. This is due to a shortage of chlorophyll.
- All plant parts become weakened and may droop, as energy is diverted toward too-fast growth as the plant stretches itself toward any source of light.
Disease Cause
Plants need sunlight in varying amounts for photosynthesis – a process that produces energy for growth and fruit and flower production. Low light causes a plant to divert all energy to upward (apical) growth in order to find better light. Plant hormones called auxins are transported from the actively-growing tip of the plant downwards, to suppress lateral growth. A drop in cellular pH triggers expansins, nonenzymatic cell wall proteins, to loosen cell walls and allow them to elongate. This elongation results in the abnormal lengthening of stems, especially internodes, or plant "legginess" which is observed in etoliated plants.
Solutions
Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed.
- Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn.
- Introduce appropriate artificial lighting.
- Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Prevention
To avoid etiolation, provide an adequate amount of light from the beginning.
- Choose a location that matches each plant's ideal light needs. Many indoor plants do best in or near a south-facing window, which will provide the longest hours of sunlight. Flowering plants and those with colored leaves typically need more light than purely-green plants, as photosynthesis occurs in the green portions of leaves.
- Select plants with light needs that match a location's conditions. Some cultivars and varieties require less light than others.
- Use a grow light. Darker locations may require artificial illumination. A grow light may also become more necessary during winter, when sunlit hours are at their shortest.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Black spot
Infection by the black spot pathogen causes black spots or patches to appear on leaves.
Overview
Black spot is a fungus that largely attacks leaves on a variety of ornamental plants, leaving them covered in dark spots ringed with yellow, and eventually killing them. The fungus is often simply unsightly, but if it infects the whole plant it can interfere with photosynthesis by killing too many leaves. Because of this, it is important to be aware of the best methods for preventing and treating this diseases should it occur in the garden.
Symptom Analysis
Here are a few of the most common symptoms of black spot:
- The plant has developed small black spots along the leaves.
- These spots be small, circular, and clustered together, or they may have a splotchy appearance and take up large portions of the leaves.
- The fungus may also affect plant canes, where lesions start purple and then turn black.
- The plant may suffer premature leaf drop.
Though most forms of black spot fungus pose little risk to a plant's overall health, many gardeners find them unsightly. Severe cases can also weaken a plant, so it becomes more susceptible to other pathogens and diseases.
Disease Cause
Black spot is spread by various types of fungi, which differ slightly depending on whether they are in their sexual or asexual stages.
The fungal spores linger over the winter in fallen leaves and lesions on canes. In the spring, the spores are splashed up onto the leaves, causing infection within seven hours of moisture and when temperatures range between 24 to 29 ℃ with a high relative humidity.
In just two weeks, thousands of additional spores are produced, making it easy for the disease to infect nearby healthy plants as well.
There are several factors that could make a plant more likely to suffer a black spot infection. Here are some of the most common:
- Exposure to infected plants or mulch (the fungus overwinters on dead leaves)
- Weakening from physical damage, pest infestation or other infections.
- Increased periods of wet, humid, warm weather – or exposure to overhead watering
- Plants growing too close together
Solutions
Some steps to take to address black spot include:
- Prune away any infected leaves, cleaning the pruners between plants with a 10% bleach solution so that the fungus does not spread to healthy leaves.
- Don't compost pruned plant parts as the spores can linger in the soil for a long period of time - instead, dispose of them in the trash.
- Use an approved fungicide such as Trifloxystrobin, Chlorothalonil, Maneb, or Myclobutanil.
- Use a spreader in the fungicide spray to ensure better coverage.
Prevention
Here are a few tips to prevent black spot outbreaks.
- Purchase resistant varieties: Invest in fungus-resistant plant varieties to reduce the chances for black spot diseases.
- Remove infected plant debris: Fungi can overwinter in contaminated plant debris, so remove all fallen leaves from infected plants as soon as possible.
- Rake and discard fallen leaves in the fall.
- Prune regularly.
- Water carefully: Fungal diseases spread when plants stay in moist conditions and when water droplets splash contaminated soil on plant leaves. Control these factors by only watering infected plants when the top few inches of soil are dry, and by watering at soil level to reduce splashback. Adding a layer of mulch to the soil will also reduce splashing.
- Grow plants in an open, sunny locations so the foliage dries quickly.
- Follow spacing guidelines when planting and avoid natural windbreaks for good air circulation.
- Use chemical control: Regular doses of a fungicide, especially in the spring, can stop an outbreak before it begins.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Overview
Regardless of the type of plant or where it is grown, at some point, it will begin to aged yellow and dry. This is a natural, unavoidable process that happens when the plant has completed all of the steps in its life.
Annual plants go through this process at the end of a single growing season. Perennial plants live for multiple years, if not tens or hundreds of years, but will still ultimately exhibit these symptoms.
Symptom Analysis
When plants have progressed through their natural developmental stages and are nearing the end of their lifecycle, they begin showing signs of decline. Leaves will start to yellow and droop, and over time they turn papery brown and dry.
Once completely dry, the leaves begin to fall from the plant until the entire plant has dried out.
Disease Cause
At the end of its life, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence or natural aging and death. Cell division stops, and the plant begins catabolizing resources to use in other parts of the plant.
As this happens, the tissues begin yellow and drying until the entire plant is desiccated and perishes.
Solutions
If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Prevention
Unfortunately, there is no way to prevent plants from dying of “old age.” To help prolong their life, and put off symptoms of aged yellow and dry for as long as possible, take care of them by giving them enough water, fertilizing them appropriately, and making sure they get enough sunlight.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Stem rot
Bacterial infection can cause the stems to become soft and rotten.
Overview
Stem rot is a serious disease and can affect many different types of plants. it can be particularly prevalent when the temperature of the soil is over 16 ℃ and there's a lot of moisture in the soil. This could be from unusually heavy rainfalls or too much irrigation. Once stem rot sets in, it's very difficult to get rid of the disease and most affected plants will have to be discarded. This is especially the case for vegetables, herbs, and other herbaceous plants that have soft stems. This is why it's important to ensure that the soil used for growing these plants is well-drained and that overwatering is avoided. Using good cultural practices also help in curbing these types of fungal diseases.
Symptom Analysis
Plants that have been affected by stem rot will first display a yellowing of the lower leaves. This is followed by obvious wilting and stunted growth.
If the stem of the affected plant is examined closely, there will be some dark discolorations starting near the base and moving upward. If the roots of affected plants are examined, they will appear dark and mushy instead of white and healthy-looking. Eventually, the entire plant will wilt and die.
Disease Cause
Stem rot is caused by a variety of soil-borne fungus pathogens. The type of fungus depends on the species of plant that is affected. Two fungi responsible for stem rot are Rhizoctonia and Fusarium. These fungal pathogens live in soil and migrate to the plant when conditions are optimum. This includes warm, humid weather and excessive soil moisture. Commonly, vegetable seedlings are affected by these fungi.
Sclerotinia sclerotiorum is another fungus that causes stem rot in plants. This fungus has a host range of over 350 different species of plants. Plants most susceptible to this fungus include many vegetable varieties such as cucumbers, beans, cilantro, carrots, cabbage, melons, lettuce, peas, onions, tomatoes, pumpkins, and squash. This fungus can produce different symptoms in different species. In some cases, the fungus causes irregular spots on stems and other plant material that appear water-soaked. On other plant species, the fungus appears as dry lesions that grow and girdle the stem of the plant.
The third type of fungus that causes stem rot is Phytophthora capsici. Plants that belong to the cucumber family are most susceptible to this fungal infection. This fungus manifests as water-soaked lesions on the stems that then turn brown and girdle the stem.
All of these fungal pathogens are transmitted to the plant by water splashing from the soil up onto the plant. That's because the fungal spores live in the soil where they wait for the right conditions to infect the plants.
Solutions
If the plant is only infected a little, it can sometimes be saved. This mainly applies to houseplants that are grown in pots. Here's what to do.
- Remove the plant from the pot and gently shake off as much soil as possible.
- Using pruning tools that have been disinfected, remove any diseased foliage and roots.
- Be sure the new pot has good drainage holes and wash it with one part bleach and nine parts water to ensure that it is completely clean and sanitized.
- Dip the plant's roots in fungicide to kill off any remaining fungal spores before potting into the clean growing medium.
- Only water the plant when the top inch of the soil is dry and never let the plant sit in water.
For plants that are grown in the ground, it's best just to remove the infected plants and destroy them. Do not plant in the same spot until the soil has been allowed to dry out and has been treated with a fungicide.
Prevention
For outdoor gardens:
- Raking the garden thoroughly in the springtime will help to cut down on pathogens that may be living in the soil.
- Using a copper fungicide on plants in the springtime will cut down on fungal growth and prevent the spread of infection.
- Placing a heavy layer of mulch on top of the soil will also prevent pathogens from splashing up onto the stems of plants.
- Place plants at the recommended spacing to encourage better air flow between them.
- Water plants at the base instead of overhead to prevent excessive moisture on foliage.
For indoor plants:
- Avoid overwatering houseplants and ensure the roots do not sit in water.
- Make sure that indoor plants receive adequate air circulation and light.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Distribution Map
Habitat
Arid thicket, slopes of sheltered ravines
Map
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info
Plant Type
Succulent, Herb
Flower Color
Red
Yellow
Green
Orange
Bloom Time
Spring
Leaf Color
Green
Red
Name story
Bear's paw
Cotyledon tomentosa, native to Africa, produces large chunky ovate fuzzy green leaves with prominent "teeth" at the tips that give the impression of the bear's paws. Hence, the resemblance inspires the name, the bear's paw.
Symbolism
Towery, soft, messy
Usages
Garden Use
Bear's paw is a unique-looking species of succulent chosen by many gardeners in Mediterranean and desert climates for its glossy, paw-shaped leaves and small but pretty flowers. It is usually planted in low borders, succulent gardens, or rock gardens.
Scientific Classification
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Download the App
Related Plants
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Sign in/sign up
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Water
Indoor
Indoor
Outdoor potted
In the ground
Choose a site here for personalized care tips. Essentials
Bear's paw prefers well-drained soil and infrequent watering. Originating from arid habitats, it thrives with moderate moisture and occasional drought. Its succulent leaves store water, so avoid overwatering to prevent rot. Adjust watering schedules during seasonal shifts to mimic its natural environment.
Watering check today
More
Spring
Summer
Autumn
Winter
Morning
Noonday
Evening
Morning watering can reduce the risk of fungal growth. Requirements
Every 2-3 weeks
Watering Frequency
Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App
Just like people, each plant has its own preferences and needs. Devote time to understanding your plants so you can nurture them properly. Observe your plants attentively, learning from their growth patterns, and becoming more in tune with their needs as you grow together. Keep a watchful eye on new plants and seedlings, as they are sensitive to both overwatering and underwatering. Shower them with gentle love and attention, fostering their growth and strength. Let the rhythm of your local climate guide your watering habits, adapting your schedule to the changing weather and the needs of your plants. Amount and Approach
Watering from the soil
1. Gradually pour water to the soil from above.
2. Stop watering your plant once water begins to flow out of the drainage holes in the pot.
3. Allow it to rest for 1 minute, then discard any water remaining in the tray, making sure your plant is not sitting in the water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Watering from the bottom
1. Fill the tray with water, ensure that the soil makes contact with the water.
2. Let it rest for 10 minutes.
3. Drain excess water from the tray if the soil is uniformly damp.
4. Watering more to the tray if the soil remains dry.
5. Allow it to sit for an additional 20 minutes before draining any excess water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Soaking the water
1. Select a location for soaking your plants, such as a tray or bathtub.
2. Pour a few centimeters of fresh water into the bottom of your chosen container.
3. Soaking your plant pots within the water, allowing them to absorb moisture for 1 hour.
4. Remove the plants from the water and let them dry.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. For Bear's paw, outdoor watering can be done using the method of sprinkling. It is a simple and direct approach. It involves pouring water onto the soil around the plant, allowing the water to naturally seep into the root zone. Typically, containers such as watering cans, buckets, or watering jugs are used for sprinkling. Depending on the size of the plant, usually, 1-2 gallons of water are required to ensure the soil around the roots is thoroughly moistened.
Important Symptoms
Overwatering
Overwatering can easily lead to disease symptoms in Bear's paw, as it has evolved mechanisms to survive drought conditions. For instance, the plant stores water in its tissues, closes its stomata, and reduces water loss. Symptoms of overwatering include yellowing leaves, brown or black spots, leaf rot...
View more
(Symptom details and solutions)
Brown or black spots
Excessive watering can damage the plant's root system, making it vulnerable to fungal infections. The plant may develop dark brown to black spots that spread upwards from the lower leaves which are usually the first to be affected.
Leaf rot
Overwatering can cause the leaves to become waterlogged, leading to rotting when the environment is humid.
Soft or mushy stems
Excess water can cause stems to become soft and mushy, as the cells become waterlogged and lose their structural integrity.
Root rot
Excess water in the soil can lead to the growth of harmful fungi and bacteria, causing the roots to rot and eventually kill the plant.
Increased susceptibility diseases
Overwatering plants may become more susceptible and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Adjust watering frequency based on seasons and soil dryness. Wait for soil to dry before watering.2. Increase soil aeration by loosening surface and gently stirring with a wooden stick or chopstick.3. Optimize environment with good ventilation and warmth to enhance water evaporation and prevent overwatering.
Underwatering
For Bear's paw, it is not prone to experiencing plant health issues due to lack of watering. However, it is possible to suffer from dehydration if watering is consistently forgotten for an extended period. Symptoms of dehydration include wilting, yellowing leaves, root damage...
View more
(Symptom details and solutions)
Wilting
Due to the dry soil and insufficient water absorption by the roots, the leaves of the plant will appear limp, droopy, and lose vitality.
Root damage
Prolonged underwatering can cause root damage, making it difficult for the plant to absorb water even when it is available.
Slow growth
The plant may exhibit delayed development or slow growth due to not receiving enough water to support its growth.
Increased susceptibility to pests and diseases
Underwatered plants may become more susceptible to pests and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Thoroughly saturate soil with slow ring watering to ensure uniform and sufficient moisture for plants. 2. Increase air humidity with water trays or misting to slow leaf water evaporation. 3. Watering according to the recommended frequency.Adjust watering frequency based on seasons and soil dryness.
Discover information about plant diseases, toxicity, weed control and more.
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Full sun
Ideal
Above 6 hours sunlight
Partial sun
Tolerance
About 3-6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
Bear's paw fares well under extensive sunlight exposure, simulating its native habitat where daylight is plentiful. It can adapt to moderate light from shedding more intense rays, although the plant's health may be somewhat affected. Too much or too little light can hinder its growth or cause sunburn.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Bear's paw is a beloved choice for indoor gardening, and they require strong light to thrive. However, when placed in rooms with suboptimal lighting, they may develop symptoms of light deficiency.
View more
(Symptom details and solutions)
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Leggy or sparse growth
The spaces between leaves or stems of your bear's paw may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Bear's paw require strong light to thrive, and some are remarkably resilient to sun exposure, rarely suffering from sunburn.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover information about plant diseases, toxicity, weed control and more.
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
Bear's paw is native to regions with warm temperature ranging from 20 to 38 ℃ (68 to 100 ℉). It prefers warm temperatures and thrives best in sunny, dry climates. During winter, it's best to provide the plant with a slight decrease in temperature, possibly around 18℃ (64℉) to encourage dormancy.
Regional wintering strategies
Winter is the growing season for Bear's paw, so it is important to maintain temperatures above {Suitable_growth_temperature_min} for optimal growth. When the outdoor temperature drops below {Tolerable_growing_temperature_min}, it is advisable to bring the plant indoors to a well-lit area. Increase watering when the temperature is higher and reduce watering when it approaches {Tolerable_growing_temperature_min}. If overwintering the plant outdoors, it should be placed in a sheltered area with ample sunlight. Consider setting up a temporary greenhouse for protection if the outdoor temperature is consistently low and keep the plant adequately moist.
Important Symptoms
Low Temperature
Bear's paw is not tolerant of extremely cold temperatures. It thrives best when the temperature is between {Suitable_growth_temperature_min} and {Suitable_growth_temperature_max}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, the leaves will exhibit water-soaked necrosis and wilting. In cases of mild frost damage, there may not be any initial symptoms, but after a week, the leaves will significantly wilt and eventually fall off.
Solutions
Trim off the frostbitten areas. Immediately move indoors to a warm environment or set up a makeshift greenhouse for cold protection. When placing the plant indoors, choose a location near a south-facing window to ensure ample sunlight. When using a makeshift greenhouse, pay attention to ventilation to avoid plant decay due to poor airflow.
High Temperature
During summer, Bear's paw should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the plant will enter a dormant state, and it becomes more prone to rot in high humidity conditions.
Solutions
Remove the dry and rotten parts. Move the plant to a partially shaded area, providing protection from direct sunlight during midday and afternoon. Stop watering the plant until the weather becomes cooler.
Discover information about plant diseases, toxicity, weed control and more.
Transplant spacing
How to Successfully Transplant Bear's paw?
The perfect time to transplant bear's paw is from early summer to mid-fall, offering optimal growth conditions. Choose a sunny spot with well-draining soil, and ensure the plant isn't over-watered. With these considerations, transplanting bear's paw will be a delightful experience for both the plant and the gardener!
What Preparations are Needed Before Transplanting Bear's paw?
What is the Ideal Time for Transplanting Bear's paw?
The most opportune period for transplanting bear's paw is from the commencement of summer into the heart of fall. This season offers the warmth and sunlight conducive to the growth of bear's paw. You'll observe bear's paw's thriving vibrancy as it feeds off the abundant solstice energy, making its transplanting worthwhile. This step-by-step pre-transplanting care will ensure a successful transplantation process you'll be proud of.
How Much Space Should You Leave Between Bear's paw Plants?
Giving bear's paw enough room to grow is important, so space them about 6-8 inches (15-20 cm) apart when transplanting. This ensures that they have enough space to thrive and spread out happily!
What is the Best Soil Mix for Bear's paw Transplanting?
For bear's paw, a well-draining soil mix is best, such as a blend of cactus or succulent potting mix with some extra perlite or sand. Also, adding a slow-release fertilizer into the soil will give your plants the nutrients they need for successful growth.
Where Should You Relocate Your Bear's paw?
Since bear's paw loves sunlight, choose a location that gets plenty of bright but indirect light. A spot with morning sun and afternoon shade would be ideal to keep your plants happy without being overexposed.
What Equipments Should You Prepare Before Transplantation Bear's paw?
Gardening Gloves
To protect your hands from harm while handling the soil and plant.
Shovel or Spade
Needed for digging holes and removing the plant from its original location.
Garden Trowel
Ideal for transferring the plant and its soil into the new location.
Watering Can
Used to water the plant before and after the transplant.
Pruning Shears
May be needed if the bear's paw plant has grown large and needs to be trimmed before transplanting.
How Do You Remove Bear's paw from the Soil?
Before starting, water your bear's paw plant to relieve its stress and make the transplant process easier. Also, water the new planting hole to prepare it for the new arrival.
Using a shovel or trowel, dig a hole in the ground. The hole should be twice the diameter of the plant's root ball and deep enough to accommodate it.
Place your plant into the hole carefully. The top part of the root ball should be level with the surrounding soil surface after the plant is inserted.
Slowly backfill the hole with the surrounding soil. Be careful not to bury the bear's paw's stem or leaves in the process.
After transplanting, give the bear's paw plant a good watering to settle the soil.
Step-by-Step Guide for Transplanting Bear's paw
Step1 Preparation
Before starting, water your bear's paw plant to relieve its stress and make the transplant process easier. Also, water the new planting hole to prepare it for the new arrival.
Step2 Digging
Using a shovel or trowel, dig a hole in the ground. The hole should be twice the diameter of the plant's root ball and deep enough to accommodate it.
Step3 Placing
Place your plant into the hole carefully. The top part of the root ball should be level with the surrounding soil surface after the plant is inserted.
Step4 Backfilling
Slowly backfill the hole with the surrounding soil. Be careful not to bury the bear's paw's stem or leaves in the process.
Step5 Watering
After transplanting, give the bear's paw plant a good watering to settle the soil.
How Do You Care For Bear's paw After Transplanting?
Immediate care
Water your bear's paw plant regularly until it's well-rooted and shows signs of new growth. The soil should be kept moist but not water-logged.
Pruning
Trim dead or damaged leaves to allow the plant to direct its energy toward healthy growth.
Monitoring
Watch out for any signs of stress, like leaf wilt or discoloration, and adjust your care routine accordingly. The bear's paw plant tends to droop when over or underwatered, so regulate the water supply as needed.
Protection
Make sure the plant is protected from extreme weather conditions, pests, and diseases during the early stages of its new life at the new location.
Troubleshooting Common Issues with Bear's paw Transplantation.
When is the best time to transplant bear's paw?
The optimal period to relocate bear's paw is early summer through mid-autumn. This allows the plant ample time to recover before winter conditions.
What's the proper spacing for bear's paw when transplanting?
To ensure healthy growth, maintain a gap of 6-8 inches (15-20 cm) between each plant. This grants bear's paw enough space to spread out its leaves.
What should I do if the leaves of my transplanted bear's paw start turning yellow?
Yellow leaves might indicate overwatering. Correct this situation by checking the moisture level before watering and making sure your pot or garden has sufficient drainage.
How do I prepare the soil for transplanting bear's paw?
Use well-draining soil, enriched with organic compost. Make sure the PH level is neutral to slightly acidic range, ideally suited for bear's paw.
What if my recently transplanted bear's paw looks rather droopy?
Drooping could be due to transplant shock. Keep it in a shaded location, maintain moisture and gradually introduce sunlight. The plant should recover in a couple of weeks.
Why are the leaves of my bear's paw browning after transplanting?
If you notice browning leaves, your bear's paw might be receiving too much direct sunlight. Move the plant to a location with bright but indirect light.
How often should I water bear's paw after transplanting?
Generally, water bear's paw thoroughly, then let the top inch (2.5 cm) of soil dry out before watering again. Overwatering can cause root rot, so be cautious.
Why isn't my transplanted bear's paw showing new growth?
Bear's paw might be in a resting phase. However, if the plant looks unhealthy, it might not be getting enough nutrition. Consider a balanced, slow-release fertilizer.
What if the roots of my transplanted bear's paw are turning black?
Black roots usually indicate root rot, a result of overwatering or poor drainage. If the condition persists, consider repotting the plant in fresh, well-drained soil.
How can I encourage root growth after transplanting bear's paw?
Stimulate root growth by maintaining a stable environment, providing proper watering, moderate light, and applying a suitable fertilizer. This promotes healthier and quicker root establishment.
Discover information about plant diseases, toxicity, weed control and more.
1 / 5
