About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
More Info
Related Plants
Related Articles
Add to My Garden Moonglow
Crassula 'Moonglow'
Also known as: Split Rock Plant, Ivory Tower
The moonglow is a hybrid variety of the Crassula deceptor and the Propeller plant. It inherits its light, sage-green hue from the Propeller plant, while the arrangement of its leaves and their thick plump shape are more similar to that of the Crassula deceptor. Its leaves are almost the same size from top to bottom, and the plant is nearly square when looked at from the top down, with a pagoda-like profile that presents a distinctive appearance.
Planting Time
Spring, Summer
Care Guide for Moonglow
Drought-tolerant. Allow the soil to dry completely between watering.
Fertilization once a month during the growing season.
Deadhead (or remove) withered flowers after flowering.
Flower Pots
Full sun, Partial sun
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Scan QR code to download
Moonglow
Water
Every 3 weeks
Sunlight
Full sun
Planting Time
Spring, Summer
Download and print this plant care card and attach it to your plants
Download
Moonglow
Water
Every 3 weeks
Sunlight
Full sun
Planting Time
Spring, Summer
Download
Moonglow
Water
Every 3 weeks
Sunlight
Full sun
Planting Time
Spring, Summer
Download
Questions About Moonglow
Watering 
Sunlight 
Temperature 
Fertilizing What should I do if I water my Moonglow too much or too little?
Underwatered Moonglow
Moonglow and other succulents can endure long periods without water, so it’s unusual to find one of these suffering from underwatering. But, if you somehow forgot about your plant and neglected to water it for a month or more, you’ll probably find your Moonglow looking thirsty or with some damage from lack of watering.
It is very easy to identify an underwatered Moonglow. Plant look lacklustre and wrinkled. Some may have dried up completely, turned brown and crispy, or dropped off the plant. And of course, the soil will be completely dried out.
If your Moonglow is thirsty and underwatered, give it plenty of water as soon as possible. Submerging the pot entirely in water for about 5-10 minutes is a good way to make sure the soil and plant are rehydrated properly. When you feel a sense of moisture on the surface of the soil with your finger, it means the watering is done properly.
Overwatered Moonglow
Overwatering is dangerous to Moonglow and can be fatal to your plant if you don’t remedy the situation. Too much moisture over time leads to root rot, which prevents the roots from being able to absorb nutrients and water from the soil. Root rot occurs when wet conditions allow fungi and bacteria to flourish in the soil and feed on roots. When you find that it's overwatered, you'd better change the growing conditions, place it somewhere with more air ventilation and adjust water frequency, for example.
The symptoms of overwatering are yellow, swollen, and translucent organs that may even burst open from being over-full with water. If the problem continues without being treated, plant might turn brown or black, and fall off the plant at the slightest touch. Be sure to check the soil to determine if overwatering is the culprit, as some other issues can cause similar symptoms.
It’s a bit difficult (but not impossible) to save an overwatered plant. The key is catching it early before a lot of damage has occurred. If the roots become rotten, it is likely to kill the entire plant. If you suspect you have overwatered your Moonglow, the first step is to remove it from its pot and check the roots and soil.
After removing the plant from its pot, gently remove wet soil from around the roots and then rinse them clean in room-temperature water. This helps with removing fungus that might be lurking in the soil and allows you to get a better sense of how healthy the roots are. If your plant has already developed root rot, you will see roots that are dark brown or black, soft, mushy, or slimy.
If the majority of the roots are already affected by root rot, it may not be possible to save the plant. In this case, it is best to remove any healthy stem and try to use these to propagate a new Moonglow. If, on the other hand, only a portion of the roots have succumbed to rot and other healthy roots still remain, there is a chance it can be saved.
Use a sterilized cutting tool to remove any unhealthy-looking roots. Once you're left with only the firm, pale roots, it’s a good idea to dip them in a fungicide to kill off any remaining spores. After that you can repot your Moonglow in fresh, free-draining potting soil. While this does not always work to save a succulent with root rot, in most cases this plant will be able to make a full recovery and will put out new growth starting in the next growing season.
Read More ![more]()
How often should I water my Moonglow?
There’s not a hard-and-fast rule for how often to water Moonglow. The best way to determine this is to check the soil and only water when it’s bone dry. You can either stick your finger in the pot or use a moisture meter to check the soil below the surface. When you plant it in a deep pot, you can do this with a stick or chopstick. If it feels even a little bit moist, wait a few days and check it again.
Most people will need to water Moonglow about every two weeks in summer and once a month in winter, but there are several factors that can change the frequency. The section below lists some considerations that can help you to determine how often to water.
Read More ![more]()
What should I consider when watering my Moonglow?
There are several environmental conditions that will affect how your Moonglow needs to be watered, including the container size, soil type, temperature, and humidity.
First off, the container and soil you use will determine how often to water and how much water to use each time. Be sure you use a container with plenty of drainage holes in the bottom so extra water can escape the pot. A small container has less room for soil, meaning it won’t hold as much moisture, while a larger pot will stay wet longer and need to be watered less often. It’s important not to keep your Moonglow in an oversized pot as this can easily lead to overwatering. When repotting, move to just one size larger than the current container. A shallow container works better than a deep one, since Moonglow has shallow root systems.
Moonglow will need to be watered less often in winter and more often in the active growing season in spring and autumn. During the winter, growth slows down considerably and the plant isn’t using much energy or water. There is less water lost to evaporation in cooler winter air, meaning that soil stays wet for much longer than it would in the summer.
This also applies to the general climate around your home. If you live in a humid location with a lot of rain, you will need to water less often than if you live in a dry, arid climate. Remember that conditions at the same geographic location can vary significantly with the season and the use of indoor heating and air conditioning.
Outdoor Planting
If Moonglow is planted in the ground, after establishing a root system, it shouldn’t need supplemental water beyond what it receives through precipitation and dew. But if there is a long dry period, you may want to water occasionally. In other areas where Moonglow can only be grown in a container, this plant can be moved outside in the spring and summer when the temperature is proper and then brought back inside when temperatures start to drop. A potted Moonglow kept outside usually needs more water than the same plant kept indoors, because there is a lot more sun exposure even on a shaded porch.
Read More ![more]()
How to water Moonglow?
The best way to water Moonglow is to soak it thoroughly and then allow it to dry out before it gets watered again. Since this plant is somewhat drought tolerant, you can let it get quite dry before watering again. It is always better to give this type of plant too little water over too much.
When you water, make sure the soil gets thoroughly soaked throughout the whole pot. Don’t pour the water in just one spot, but rather try to go around the whole rim of the planter to be sure that it has a chance to get wet on all sides of the plant. The correct amount of water will depend on the size of your container and how much water your soil absorbs. Give your Moonglow enough water that it drains out from the drainage holes and then (ideally) leave the drained water in the saucer for about 20-30 minutes to absorb into dry pockets of soil. After that, discard any excess water that’s still in the saucer to avoid the soil getting waterlogged.
Bottom-watering is also an excellent method for Moonglow, as you can be sure that the soil gets thoroughly moistened. This process involves placing the pot into a saucer of water and allowing the soil to absorb moisture through the drainage holes. You will know that the soil has absorbed enough water when the top layer is moist. This takes a bit more time than top-watering, but is almost foolproof in getting an even distribution of water throughout the pot.
The original habitat of Moonglow is relatively dry with little rain, but when it rains, the soil will be thoroughly moistened. So you can mimic this situation by bottom-watering your plant when the soil is totally dry. Deep soil bathing is better than frequent light watering for Moonglow.
Read More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
More Questions People Also Ask
More About How-Tos
Explore 5 of plant how-tos on Feng shui direction, Water, Lighting, Temperature, Transplant, etc.
Feng shui direction
Southwest
The moonglow mirrors the earthy energy of the Southwest direction, implying a promising harmony. The plant's chunky leaves symbolize good fortune and stability, elements key to enhancing love and interactions in this zone. However, this synergy is inherently complex, subject to differing interpretations.
Water
Every 3 weeks
Moonglow originates from arid environments, preferring infrequent and thorough watering. Allow the soil to dry completely between waterings to mimic its natural habitat and prevent overwatering. It is always better to give this type of plant too little water over too much.
Learn More 
Lighting
Full sun
Moonglow thrives in conditions where the sun's rays can reach it intensively. However, it clarifies that even though it prefers continuous sun exposure, it still flourishes in environments where the solar luminescence is slightly softer. Overexposure may cause stress, while insufficient exposure can lead to suppressed growth. Its origin habitat is sun-loved.
Temperature
15 to 35 ℃
Moonglow is accustomed to a native growth environment having a temperature range of 68 to 100 °F (20 to 38 ℃). Being a heat lover, optimal growth occurs within this range. In colder seasons, temperature adjustment may be necessary to emulate this.
Transplant
0.5-1 feet
Transplanting 'moonglow' is ideally executed during its dormancy period, typically late autumn to early spring (S3-S4). This is due to the cooler temperatures and increased rainfall which assist root establishment. Transplant 'moonglow' in a location with well-drained soil and full to partial sun exposure for best outcomes. Don't disturb the roots unnecessarily during transplanting - it's imperative to be gentle!
Common Pests & Diseases
Common issues for Moonglow based on 10 million real cases
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Solutions: Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed. Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn. Introduce appropriate artificial lighting. Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Solutions: If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Solutions: If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible. For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface. In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well. If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Leaf rot
This pathogen can cause the leaves to rot.
Solutions: Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden. In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label. In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Overview
All plants require light, and if they do not receive it in the quantities that they require this distorts their growth in a process known as etiolation. In essence, etiolated plants are diverting all of their energy to growing taller in a desperate attempt to reach a position where they can meet their light requirements. Many other growth factors are harmed by this, and so light-deprived plants can become weak and distorted until they are almost unrecognizable. Low light symptoms are most commonly seen in houseplants, but outdoor specimens can also be affected.
Symptom Analysis
Although symptoms will vary in different plants, the general symptoms of low light are easy to spot.
- Plant stems grow tall and lanky.
- There are less leaves, and both leaves and stems tend to be pale and insipid looking. This is due to a shortage of chlorophyll.
- All plant parts become weakened and may droop, as energy is diverted toward too-fast growth as the plant stretches itself toward any source of light.
Disease Cause
Plants need sunlight in varying amounts for photosynthesis – a process that produces energy for growth and fruit and flower production. Low light causes a plant to divert all energy to upward (apical) growth in order to find better light. Plant hormones called auxins are transported from the actively-growing tip of the plant downwards, to suppress lateral growth. A drop in cellular pH triggers expansins, nonenzymatic cell wall proteins, to loosen cell walls and allow them to elongate. This elongation results in the abnormal lengthening of stems, especially internodes, or plant "legginess" which is observed in etoliated plants.
Solutions
Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed.
- Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn.
- Introduce appropriate artificial lighting.
- Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Prevention
To avoid etiolation, provide an adequate amount of light from the beginning.
- Choose a location that matches each plant's ideal light needs. Many indoor plants do best in or near a south-facing window, which will provide the longest hours of sunlight. Flowering plants and those with colored leaves typically need more light than purely-green plants, as photosynthesis occurs in the green portions of leaves.
- Select plants with light needs that match a location's conditions. Some cultivars and varieties require less light than others.
- Use a grow light. Darker locations may require artificial illumination. A grow light may also become more necessary during winter, when sunlit hours are at their shortest.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Overview
Regardless of the type of plant or where it is grown, at some point, it will begin to aged yellow and dry. This is a natural, unavoidable process that happens when the plant has completed all of the steps in its life.
Annual plants go through this process at the end of a single growing season. Perennial plants live for multiple years, if not tens or hundreds of years, but will still ultimately exhibit these symptoms.
Symptom Analysis
When plants have progressed through their natural developmental stages and are nearing the end of their lifecycle, they begin showing signs of decline. Leaves will start to yellow and droop, and over time they turn papery brown and dry.
Once completely dry, the leaves begin to fall from the plant until the entire plant has dried out.
Disease Cause
At the end of its life, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence or natural aging and death. Cell division stops, and the plant begins catabolizing resources to use in other parts of the plant.
As this happens, the tissues begin yellow and drying until the entire plant is desiccated and perishes.
Solutions
If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Prevention
Unfortunately, there is no way to prevent plants from dying of “old age.” To help prolong their life, and put off symptoms of aged yellow and dry for as long as possible, take care of them by giving them enough water, fertilizing them appropriately, and making sure they get enough sunlight.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Overview
Flower withering occurs when flowers become weak, droopy, wilted, or faded until they can’t be revived. During withering, they begin to wrinkle and shrink until the flower becomes completely dry or dead.
Any flowers, regardless of the plant type or the climate they are grown in, are susceptible to withering. It is a worldwide problem across houseplants, herbs, flowering ornamentals, trees, shrubs, garden vegetables, and food crops.
Unlike wilting—which withering is often confused with—withering can be caused by different things and is often due to more than a lack of water. Withering can be fatal in severe cases.
Symptom Analysis
Flower withering progresses from very mild cases to severe occurrences that kill the flower. The severity of the symptoms is related to the cause and how long the condition is allowed to progress before action is taken.
- Wilted, droopy flowers
- Petals and leaves begin to wrinkle
- Brown papery streaks or spots appear on the petals and leaf tips
- Flowerhead shrink in size
- Petal color fades
- Yellowing leaves
- Complete death of the flower
Disease Cause
The main causes of flower withering include natural age progress, lack of water, nutritional deficiencies, and bacterial or fungal diseases. It’s critical to determine the underlying cause when flower withering is noticed. This will guide the best course of action, if treatment is possible.
Check the soil for moisture and then closely examine the entire plant for signs of nutrient deficiencies. If neither of those appears to be the cause then cut open the stem below a flower. If a cross-section reveals brown or rust-colored stains it is safe to assume that this is a bacterial or fungal infection.
If the flower is nearing the end of its normal lifespan, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence, or cell aging and death. Cell division stops and the plant begins breaking down resources within the flower to use in other parts of the plant.
In all other cases, flower withering happens when the plant seals off the stem as a defense mechanism, stopping transport within the vascular system. This prevents further water loss through the flowers but also stops bacteria and fungi from moving to healthy parts of the plant. Once water and nutrient transport stops, the flower begins to wither and ultimately die.
Solutions
If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface.
In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well.
If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Prevention
This is definitely one of those instances where prevention is more effective than cure. Here are some preventative measures for avoiding premature flower withering.
- Water plants according to their needs -- either keep the soil slightly moist or allow the top inch or two to dry out before watering again.
- Fertilize lightly on a consistent basis, depending upon the plant’s growth. Quick-growing plants and those that flower or develop fruit will need more frequent fertilizing than slow-growing plants.
- Purchase plants that are certified disease- or pathogen-free.
- Look for disease-resistant cultivars.
- Isolate plants showing disease symptoms to prevent the spread to neighboring plants.
- Practice good plant hygiene by removing any fallen plant material as soon as possible.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Leaf rot
This pathogen can cause the leaves to rot.
Overview
Leaf rot is very common among both house plants and garden plants. It affects foliage and occurs mainly when the leaves become wet due to rain or misting by the gardener. The cause is fungal disease and this is facilitated by the fungal spores adhering to wet leaves then penetrating the leaf and expanding rapidly. Damp conditions and poor air circulation will increase chances of infection taking place. Another factor are leaves that are damaged or have been penetrated by sap sucking insects that facilitate plant penetration.
Symptom Analysis
- Spores are able to cling to a damp leaf and penetrate, often through an existing wound.
- A small dark brown mark appears which expands rapidly as sporulation starts to take place.
- Quite quickly these bull's eye like circles can link together and the whole leaf turns dark and loses texture.
- Leaf drop occurs.
Disease Cause
These symptoms are caused by a bacterial infection invading the plant. Bacteria from many sources in the environment (air, water, soil, diseased plants) enter a plant through wounds, or in some cases the stomata when they are open. Once inside the leaf tissue, the bacteria feed and reproduce quickly, breaking down healthy leaves.
Bacterial infections threaten most plant species, and are more prominent in wet weather that more easily transfers the bacteria from plant to plant, or from soil to plant.
Solutions
Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden.
In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label.
In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Prevention
- Clean up garden debris at the end of the season, especially if it contains any diseased plant tissue. Diseases can overwinter from season to season and infect new plants.
- Avoid overhead watering to prevent transferring pathogens from one plant to another, and to keep foliage dry.
- Mulch around the base of plants to prevent soil-borne bacteria from splashing up onto uninfected plants.
- Sterilize cutting tools using a 10% bleach solution when gardening and moving from one plant to another.
- Do not work in your garden when it is wet.
- Rotate crops to prevent the buildup of bacteria in one site due to continuous cropping.
- Use a copper or streptomycin-containing bactericide in early spring to prevent infection. Read label directions carefully as they are not suitable for all plants.
- Ensure plants are well spaced and thin leaves on densely leaved plants so that air circulation is maximised.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
More Info
Leaf Color
Green
Blue
Scientific Classification
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Related Plants
Arrowroot
Arrowroot (Maranta arundinacea) is a perennial herb found in rainforest environments. Currently, this species is grown mostly in St. Vincent in the series of Caribbean islands. This plant is commercially viable because the root starch extract is used to make foods, makeup, and glue.
Bloom Time
Summer
Garden Usage
Plants in genus Maranta are common and popular indoor plants that serve as beautiful indoor foliage plants and are easy to care for. As perennial and evergreen herbs, they have beautiful leaf shapes, varied leaf colors, and unique patterns.
Lipstick plant
Lipstick plant (Aeschynanthus pulcher) is an evergreen perennial vine that will grow to 71 cm high. Often called the lipstick plant, its pointy, waxy leaves provide the perfect foliage while brilliant red blossoms emerge from a tubular-shaped bud to look like a tube of lipstick. It blooms from summer through winter with clusters of brilliant red trumpet-shaped flowers. Prefers partial shade in humus-rich, well-drained soil.
Bloom Time
Spring
Paperplant
The paperplant, commonly grown as an ornamental and houseplant in warm temperate countries, has lustrous leaves with eight lobes resembling a hand. Because the sap from this plant might cause allergies in certain people, it must be handled with caution. This plant will occasionally produce black berries that birds will enjoy.
Bloom Time
Autumn
Plectranthus 'Cerveza 'n Lime'
The entirety of plectranthus 'Cerveza 'n Lime' is covered in fine white tomenta. The plant emits a lovely smell that can linger on your fingers for a while after touching. Its leaves grow thick and compact in a sunlight-ample environment, but when light is insufficient, exhaustive growth will occur and its leaves will flatten. It can be cared for in the open in seasons with mild weather as long as it has proper shade to protect it from scorching sunlight.
Bloom Time
Spring, Summer, Autumn
Elephant's ear
Elephant's ear is an Australian member of the 'Elephant's Ear' family native to the tropical parts of the east coast. Growing to nearly 2 m tall, elephant's ear is a spectacular garden feature for tropical home gardens. Exercise caution, however, as the sap, berries, leaves, and roots are all toxic to mammals.
Bloom Time
Summer
Garden Usage
Plants of genus Alocasia are usually grown in green spaces, wall corners, or gardens for interior and exterior decoration. Their very distinctive leaves are shaped like arrows or hearts and have prominent veins. Leaves may have black, dark purple, or bronze markings. In some species, they can grow up to 4 to 5 m high. Their tall green or mottled-striped stems and peculiar leaves make these plants an excellent choice for interior and exterior decoration.
Surattense Nightshade
Surattense Nightshade (Solanum virginianum) is an herbaceous flowering plant species also known as Thorny nightshade or yellow-fruit nightshade. Surattense Nightshade is native to India and Nepal. Some parts of this species, like the fruit, are poisonous.
Bloom Time
Spring, Summer, Winter
View More Plants
Related Articles
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow Orange daylily See More The Orange daylily is a perennial plant known for its captivating lily-like blooms. Its natural habitats are meadows and forests, but it is also a common garden plant in temperate regions around the world. Each individual flower lasts only a day, but the plantContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow China rose See More The China rose (Rosa chinensis) is a Southwest China native. The plant has been cultivated for so long that it has become hard to tell the difference between wild and cultivated varieties. With medium-sized clusters of flowers and a long blooming season, it isContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Most Common Succulent
Plant Collection Most Common Succulent Aloe vera See More Aloe vera is an evergreen succulent species native to the Arabian Peninsula. The thick leaves are filled with gooey flesh that stores water for survival in its native desert territories. Aloe vera has become a popular houseplant and is also incorporated into a wide range ofContinue reading “Most Common Succulent”
Read More ![more]()
View More Articles
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
More Info
Related Plants
Related Articles
Add to My Garden Moonglow
Crassula 'Moonglow'
Also known as: Split Rock Plant, Ivory Tower
The moonglow is a hybrid variety of the Crassula deceptor and the Propeller plant. It inherits its light, sage-green hue from the Propeller plant, while the arrangement of its leaves and their thick plump shape are more similar to that of the Crassula deceptor. Its leaves are almost the same size from top to bottom, and the plant is nearly square when looked at from the top down, with a pagoda-like profile that presents a distinctive appearance.
Planting Time
Spring, Summer
Care Guide for Moonglow
Water
Drought-tolerant. Allow the soil to dry completely between watering.
Fertilization
Fertilization once a month during the growing season.
Pruning
Deadhead (or remove) withered flowers after flowering.
Potting Suggestions
Flower Pots
Sunlight
Full sun, Partial sun
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
Download
Questions About Moonglow
Watering Sunlight Temperature Fertilizing What should I do if I water my Moonglow too much or too little?
How often should I water my Moonglow?
What should I consider when watering my Moonglow?
How to water Moonglow?
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
Download the App
More Questions People Also Ask
More About How-Tos
Common Pests & Diseases
Common issues for Moonglow based on 10 million real cases
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Solutions: Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed. Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn. Introduce appropriate artificial lighting. Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Learn More ![more]()
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Solutions: If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Learn More ![more]()
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Solutions: If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible. For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface. In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well. If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Learn More ![more]()
Leaf rot
This pathogen can cause the leaves to rot.
Solutions: Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden. In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label. In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Learn More ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Overview
All plants require light, and if they do not receive it in the quantities that they require this distorts their growth in a process known as etiolation. In essence, etiolated plants are diverting all of their energy to growing taller in a desperate attempt to reach a position where they can meet their light requirements. Many other growth factors are harmed by this, and so light-deprived plants can become weak and distorted until they are almost unrecognizable. Low light symptoms are most commonly seen in houseplants, but outdoor specimens can also be affected.
Symptom Analysis
Although symptoms will vary in different plants, the general symptoms of low light are easy to spot.
- Plant stems grow tall and lanky.
- There are less leaves, and both leaves and stems tend to be pale and insipid looking. This is due to a shortage of chlorophyll.
- All plant parts become weakened and may droop, as energy is diverted toward too-fast growth as the plant stretches itself toward any source of light.
Disease Cause
Plants need sunlight in varying amounts for photosynthesis – a process that produces energy for growth and fruit and flower production. Low light causes a plant to divert all energy to upward (apical) growth in order to find better light. Plant hormones called auxins are transported from the actively-growing tip of the plant downwards, to suppress lateral growth. A drop in cellular pH triggers expansins, nonenzymatic cell wall proteins, to loosen cell walls and allow them to elongate. This elongation results in the abnormal lengthening of stems, especially internodes, or plant "legginess" which is observed in etoliated plants.
Solutions
Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed.
- Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn.
- Introduce appropriate artificial lighting.
- Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Prevention
To avoid etiolation, provide an adequate amount of light from the beginning.
- Choose a location that matches each plant's ideal light needs. Many indoor plants do best in or near a south-facing window, which will provide the longest hours of sunlight. Flowering plants and those with colored leaves typically need more light than purely-green plants, as photosynthesis occurs in the green portions of leaves.
- Select plants with light needs that match a location's conditions. Some cultivars and varieties require less light than others.
- Use a grow light. Darker locations may require artificial illumination. A grow light may also become more necessary during winter, when sunlit hours are at their shortest.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Overview
Regardless of the type of plant or where it is grown, at some point, it will begin to aged yellow and dry. This is a natural, unavoidable process that happens when the plant has completed all of the steps in its life.
Annual plants go through this process at the end of a single growing season. Perennial plants live for multiple years, if not tens or hundreds of years, but will still ultimately exhibit these symptoms.
Symptom Analysis
When plants have progressed through their natural developmental stages and are nearing the end of their lifecycle, they begin showing signs of decline. Leaves will start to yellow and droop, and over time they turn papery brown and dry.
Once completely dry, the leaves begin to fall from the plant until the entire plant has dried out.
Disease Cause
At the end of its life, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence or natural aging and death. Cell division stops, and the plant begins catabolizing resources to use in other parts of the plant.
As this happens, the tissues begin yellow and drying until the entire plant is desiccated and perishes.
Solutions
If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Prevention
Unfortunately, there is no way to prevent plants from dying of “old age.” To help prolong their life, and put off symptoms of aged yellow and dry for as long as possible, take care of them by giving them enough water, fertilizing them appropriately, and making sure they get enough sunlight.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Overview
Flower withering occurs when flowers become weak, droopy, wilted, or faded until they can’t be revived. During withering, they begin to wrinkle and shrink until the flower becomes completely dry or dead.
Any flowers, regardless of the plant type or the climate they are grown in, are susceptible to withering. It is a worldwide problem across houseplants, herbs, flowering ornamentals, trees, shrubs, garden vegetables, and food crops.
Unlike wilting—which withering is often confused with—withering can be caused by different things and is often due to more than a lack of water. Withering can be fatal in severe cases.
Symptom Analysis
Flower withering progresses from very mild cases to severe occurrences that kill the flower. The severity of the symptoms is related to the cause and how long the condition is allowed to progress before action is taken.
- Wilted, droopy flowers
- Petals and leaves begin to wrinkle
- Brown papery streaks or spots appear on the petals and leaf tips
- Flowerhead shrink in size
- Petal color fades
- Yellowing leaves
- Complete death of the flower
Disease Cause
The main causes of flower withering include natural age progress, lack of water, nutritional deficiencies, and bacterial or fungal diseases. It’s critical to determine the underlying cause when flower withering is noticed. This will guide the best course of action, if treatment is possible.
Check the soil for moisture and then closely examine the entire plant for signs of nutrient deficiencies. If neither of those appears to be the cause then cut open the stem below a flower. If a cross-section reveals brown or rust-colored stains it is safe to assume that this is a bacterial or fungal infection.
If the flower is nearing the end of its normal lifespan, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence, or cell aging and death. Cell division stops and the plant begins breaking down resources within the flower to use in other parts of the plant.
In all other cases, flower withering happens when the plant seals off the stem as a defense mechanism, stopping transport within the vascular system. This prevents further water loss through the flowers but also stops bacteria and fungi from moving to healthy parts of the plant. Once water and nutrient transport stops, the flower begins to wither and ultimately die.
Solutions
If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface.
In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well.
If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Prevention
This is definitely one of those instances where prevention is more effective than cure. Here are some preventative measures for avoiding premature flower withering.
- Water plants according to their needs -- either keep the soil slightly moist or allow the top inch or two to dry out before watering again.
- Fertilize lightly on a consistent basis, depending upon the plant’s growth. Quick-growing plants and those that flower or develop fruit will need more frequent fertilizing than slow-growing plants.
- Purchase plants that are certified disease- or pathogen-free.
- Look for disease-resistant cultivars.
- Isolate plants showing disease symptoms to prevent the spread to neighboring plants.
- Practice good plant hygiene by removing any fallen plant material as soon as possible.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Leaf rot
This pathogen can cause the leaves to rot.
Overview
Leaf rot is very common among both house plants and garden plants. It affects foliage and occurs mainly when the leaves become wet due to rain or misting by the gardener. The cause is fungal disease and this is facilitated by the fungal spores adhering to wet leaves then penetrating the leaf and expanding rapidly. Damp conditions and poor air circulation will increase chances of infection taking place. Another factor are leaves that are damaged or have been penetrated by sap sucking insects that facilitate plant penetration.
Symptom Analysis
- Spores are able to cling to a damp leaf and penetrate, often through an existing wound.
- A small dark brown mark appears which expands rapidly as sporulation starts to take place.
- Quite quickly these bull's eye like circles can link together and the whole leaf turns dark and loses texture.
- Leaf drop occurs.
Disease Cause
These symptoms are caused by a bacterial infection invading the plant. Bacteria from many sources in the environment (air, water, soil, diseased plants) enter a plant through wounds, or in some cases the stomata when they are open. Once inside the leaf tissue, the bacteria feed and reproduce quickly, breaking down healthy leaves.
Bacterial infections threaten most plant species, and are more prominent in wet weather that more easily transfers the bacteria from plant to plant, or from soil to plant.
Solutions
Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden.
In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label.
In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Prevention
- Clean up garden debris at the end of the season, especially if it contains any diseased plant tissue. Diseases can overwinter from season to season and infect new plants.
- Avoid overhead watering to prevent transferring pathogens from one plant to another, and to keep foliage dry.
- Mulch around the base of plants to prevent soil-borne bacteria from splashing up onto uninfected plants.
- Sterilize cutting tools using a 10% bleach solution when gardening and moving from one plant to another.
- Do not work in your garden when it is wet.
- Rotate crops to prevent the buildup of bacteria in one site due to continuous cropping.
- Use a copper or streptomycin-containing bactericide in early spring to prevent infection. Read label directions carefully as they are not suitable for all plants.
- Ensure plants are well spaced and thin leaves on densely leaved plants so that air circulation is maximised.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
More Info
Leaf Color
Green
Blue
Scientific Classification
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Download the App
Related Plants
Related Articles
Best Perennial Plant to Grow
# Useful Tips
Best Perennial Plant to Grow
# Useful Tips
Most Common Succulent
# Useful Tips
Discover more articles?
Read More 
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Sign in/sign up
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Water
Indoor
Indoor
Outdoor potted
In the ground
Choose a site here for personalized care tips. Essentials
Moonglow originates from arid environments, preferring infrequent and thorough watering. Allow the soil to dry completely between waterings to mimic its natural habitat and prevent overwatering. It is always better to give this type of plant too little water over too much.
Watering check today
More
Spring
Summer
Autumn
Winter
Morning
Noonday
Evening
Morning watering can reduce the risk of fungal growth. Requirements
Every 3 weeks
Watering Frequency
Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App
Just like people, each plant has its own preferences and needs. Devote time to understanding your plants so you can nurture them properly. Observe your plants attentively, learning from their growth patterns, and becoming more in tune with their needs as you grow together. Keep a watchful eye on new plants and seedlings, as they are sensitive to both overwatering and underwatering. Shower them with gentle love and attention, fostering their growth and strength. Let the rhythm of your local climate guide your watering habits, adapting your schedule to the changing weather and the needs of your plants. Amount and Approach
Watering from the soil
1. Gradually pour water to the soil from above.
2. Stop watering your plant once water begins to flow out of the drainage holes in the pot.
3. Allow it to rest for 1 minute, then discard any water remaining in the tray, making sure your plant is not sitting in the water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Watering from the bottom
1. Fill the tray with water, ensure that the soil makes contact with the water.
2. Let it rest for 10 minutes.
3. Drain excess water from the tray if the soil is uniformly damp.
4. Watering more to the tray if the soil remains dry.
5. Allow it to sit for an additional 20 minutes before draining any excess water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Soaking the water
1. Select a location for soaking your plants, such as a tray or bathtub.
2. Pour a few centimeters of fresh water into the bottom of your chosen container.
3. Soaking your plant pots within the water, allowing them to absorb moisture for 1 hour.
4. Remove the plants from the water and let them dry.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. For Moonglow, outdoor watering can be done using the method of sprinkling. It is a simple and direct approach. It involves pouring water onto the soil around the plant, allowing the water to naturally seep into the root zone. Typically, containers such as watering cans, buckets, or watering jugs are used for sprinkling. Depending on the size of the plant, usually, 1-2 gallons of water are required to ensure the soil around the roots is thoroughly moistened.
Important Symptoms
Overwatering
Overwatering can easily lead to disease symptoms in Moonglow, as it has evolved mechanisms to survive drought conditions. For instance, the plant stores water in its tissues, closes its stomata, and reduces water loss. Symptoms of overwatering include yellowing leaves, brown or black spots, leaf rot...
View more
(Symptom details and solutions)
Brown or black spots
Excessive watering can damage the plant's root system, making it vulnerable to fungal infections. The plant may develop dark brown to black spots that spread upwards from the lower leaves which are usually the first to be affected.
Leaf rot
Overwatering can cause the leaves to become waterlogged, leading to rotting when the environment is humid.
Soft or mushy stems
Excess water can cause stems to become soft and mushy, as the cells become waterlogged and lose their structural integrity.
Root rot
Excess water in the soil can lead to the growth of harmful fungi and bacteria, causing the roots to rot and eventually kill the plant.
Increased susceptibility diseases
Overwatering plants may become more susceptible and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Adjust watering frequency based on seasons and soil dryness. Wait for soil to dry before watering.2. Increase soil aeration by loosening surface and gently stirring with a wooden stick or chopstick.3. Optimize environment with good ventilation and warmth to enhance water evaporation and prevent overwatering.
Underwatering
For Moonglow, it is not prone to experiencing plant health issues due to lack of watering. However, it is possible to suffer from dehydration if watering is consistently forgotten for an extended period. Symptoms of dehydration include wilting, yellowing leaves, root damage...
View more
(Symptom details and solutions)
Wilting
Due to the dry soil and insufficient water absorption by the roots, the leaves of the plant will appear limp, droopy, and lose vitality.
Yellowing leaves
The leaves may begin to yellow or develop dry tips as a result of water stress and reduced nutrient uptake.
Root damage
Prolonged underwatering can cause root damage, making it difficult for the plant to absorb water even when it is available.
Loss of turgor pressure
When plants are underwatered, their cells lose water, causing a loss of turgor pressure. This can result in the plant appearing limp or deflated.
Slow growth
The plant may exhibit delayed development or slow growth due to not receiving enough water to support its growth.
Solutions
1. Thoroughly saturate soil with slow ring watering to ensure uniform and sufficient moisture for plants. 2. Increase air humidity with water trays or misting to slow leaf water evaporation. 3. Watering according to the recommended frequency.Adjust watering frequency based on seasons and soil dryness.
Discover information about plant diseases, toxicity, weed control and more.
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Full sun
Ideal
Above 6 hours sunlight
Partial sun
Tolerance
About 3-6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
Moonglow thrives in conditions where the sun's rays can reach it intensively. However, it clarifies that even though it prefers continuous sun exposure, it still flourishes in environments where the solar luminescence is slightly softer. Overexposure may cause stress, while insufficient exposure can lead to suppressed growth. Its origin habitat is sun-loved.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Moonglow is a beloved choice for indoor gardening, and they require strong light to thrive. However, when placed in rooms with suboptimal lighting, they may develop symptoms of light deficiency.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your Moonglow may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
Moonglow enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Moonglow require strong light to thrive, and some are remarkably resilient to sun exposure, rarely suffering from sunburn.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover information about plant diseases, toxicity, weed control and more.
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
Moonglow is accustomed to a native growth environment having a temperature range of 68 to 100 °F (20 to 38 ℃). Being a heat lover, optimal growth occurs within this range. In colder seasons, temperature adjustment may be necessary to emulate this.
Regional wintering strategies
Moonglow is a heat-loving plant that gradually stops growing and enters a dormant state during the winter. When the outdoor temperature drops below {Tolerable_growing_temperature_min}, it should be moved indoors for cultivation. Choose a location near a south-facing window to provide as much sunlight as possible. If there is insufficient natural light, supplemental lighting can be used. When the temperature falls below {Suitable_growth_temperature_min}, the plant's growth slows down, and watering should be reduced or stopped to prevent root rot. For Moonglow grown outdoors, watering should be completely halted during low temperatures. If feasible, you can set up a temporary greenhouse for insulation or use materials such as plastic film or fabric to wrap the plant during cold temperatures.
Important Symptoms
Low Temperature
Moonglow thrives in high temperatures and is not tolerant of low temperatures. It grows best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, the plant may become weak, wilt, and be prone to root rot. In cases of mild frost damage, there may not be any initial symptoms, but after a week, the plant will gradually wither.
Solutions
Trim off the frostbitten areas, paying attention to whether the roots have rotted. If the roots have rotted, they need to be cut off, and the plant can be propagated through cuttings. Immediately move indoors to a warm environment and place the plant near a south-facing window to ensure ample sunlight. If there is insufficient light, you can use supplemental lighting.
High Temperature
During summer, Moonglow should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the plant's growth will cease, it will experience water loss, wilting, and becomes more susceptible to sunburn.
Solutions
Remove the sunburned and rotten parts. Shield the plant from afternoon sunlight until it recovers and starts growing again. For plants with root rot, stop watering until new roots begin to emerge.
Discover information about plant diseases, toxicity, weed control and more.
Transplant
How to Successfully Transplant Moonglow?
Transplanting 'moonglow' is ideally executed during its dormancy period, typically late autumn to early spring (S3-S4). This is due to the cooler temperatures and increased rainfall which assist root establishment. Transplant 'moonglow' in a location with well-drained soil and full to partial sun exposure for best outcomes. Don't disturb the roots unnecessarily during transplanting - it's imperative to be gentle!
What Preparations are Needed Before Transplanting Moonglow?
What is the Ideal Time for Transplanting Moonglow?
The best period to relocate your moonglow is during the late spring to early summer. This timing provides the perfect climate for the plant's growth. Transplanting in this season significantly enhances your moonglow survival rate due to optimum temperatures and prolonged daylight. This stage sets a stronger root system for your plant, ensuring it thrives in its new site. Relocating your moonglow during this period is truly rewarding and utterly worthwhile.
How Much Space Should You Leave Between Moonglow Plants?
For a happy moonglow, make sure to give it room to grow. Aim to leave about 0.5-1 feet (15-30 centimeters) of space when transplanting. This allows adequate room for the roots to spread and the plant to flourish!
What is the Best Soil Mix for Moonglow Transplanting?
Moonglow loves well-draining soil, so consider a mix of equal parts potting soil, coarse sand, and peat moss. Using a base fertilizer will also give your plant a healthy head start. Remember, balanced nutrition is key for vibrant growth!
Where Should You Relocate Your Moonglow?
Location is everything! Try to find a spot with a nice balance of sun and shade for your moonglow. Full sunlight is great, but too much can be harmful, so aim for a location where it'll get morning sun and afternoon shade.
What Equipments Should You Prepare Before Transplantation Moonglow?
Spade or Shovel
To dig a hole in the soil to place your moonglow plant in.
Garden Gloves
To protect your hands while handling the plant and working with the soil.
Watering Can
To water the plant during and after the transplanting process.
Pruning Shears
To trim any damaged or dead leaves from your moonglow.
Measuring Tape
To ensure correct spacing between plants if you are planting multiple moonglow.
How Do You Remove Moonglow from the Soil?
Prepare the new planting hole before removing moonglow from its original location. The hole should be twice as wide and deep as the plant's root ball for optimal growth.
Follow the above mentioned methods to safely remove the moonglow from its original location.
Put the plant into the prepared hole, ensuring the top of the root ball is level with or slightly above the surrounding soil so it isn’t sitting too deep.
Fill the hole around the root ball with soil, lightly packing it in as you go.
Give the plant a good watering right after transplanting.
Step-by-Step Guide for Transplanting Moonglow
Step1 Preparation
Prepare the new planting hole before removing moonglow from its original location. The hole should be twice as wide and deep as the plant's root ball for optimal growth.
Step2 Removing moonglow
Follow the above mentioned methods to safely remove the moonglow from its original location.
Step3 Planting moonglow
Put the plant into the prepared hole, ensuring the top of the root ball is level with or slightly above the surrounding soil so it isn’t sitting too deep.
Step4 Backfilling
Fill the hole around the root ball with soil, lightly packing it in as you go.
Step5 Watering
Give the plant a good watering right after transplanting.
How Do You Care For Moonglow After Transplanting?
Watering
Regularly water the moonglow for the first few weeks after transplantation. Ensure the soil is moist, not waterlogged.
Pruning
Trim away any dead or dying leaves to encourage new growth and overall plant health.
Monitoring
Keep a close eye on your moonglow over the following weeks to identify any signs of transplant shock, such as wilted or yellowed leaves.
Troubleshooting Common Issues with Moonglow Transplantation.
When is the best time to transplant moonglow?
Transplant moonglow during the late growing season to early dormant season. This is typically between the third and fourth quarter of the year.
What is the ideal space between each moonglow when planting?
Ideal planting distance for each moonglow should be around 0.5-1 feet (15-30 cm). Give them space to grow and avoid overcrowding.
How do I prepare the soil before transplanting moonglow?
Ensure the soil drains well. You can improve soil structure by adding organic matter like compost. It improves moisture retention and nutrient availability.
How deep should the holes be for moonglow transplantation?
Make a hole twice the diameter of the container the moonglow is in. The depth should match its current root ball height.
How often should I water moonglow after transplantation?
Moonglow requires moderate watering after transplanting, usually once every 7-10 days. Ensure the water drains well to prevent root rot.
Should I prune moonglow before transplanting it?
It's not necessary, but you can remove any damaged or diseased leaves. This helps the plant to focus its energy on establishing its root system.
Can I transplant moonglow using its cuttings?
Yes, moonglow can be grown from cuttings. Make sure the cuttings are dried out and healed before you plant them in prepared soil.
How do I protect my transplanted moonglow from pests?
Pest management includes regular monitoring, using natural pesticides, and ensuring your plant is healthy since a robust moonglow can better fend off pests.
What should I do if the leaves of my transplanted moonglow turn yellow?
Yellowing leaves may indicate overwatering. Reduce your watering frequency and ensure the soil has good drainage. If the condition persists, consult a professional.
Does moonglow need to be fertilized after transplantation?
Light fertilizing with low-nitrogen plant food can promote root development. Be careful not to over-fertilize as it might burn the roots.
Discover information about plant diseases, toxicity, weed control and more.
1 / 5
