Misting can be a good way to keep the leaves hydrated but not too soggy. Always make sure that there's good drainage to prevent root rot. The plant can be sensitive to fluoride, which is often common in the public water supply, and this species does not tolerate hard water, especially if it's in its growing stages. Use a watering can or a sprinkler with purified or distilled water. Make sure to evenly water the entire surface of the soil so the stems won't rot. Use distilled water from time to time to avoid the death of the plant, leaf burn, or stunted growth instead of tap water. Another option is to utilize rainwater whenever it's available. Keep the soil moist every time but prevent it from being too soggy if the Dragon blood tree is planted in a pot. If it's outside planted in your garden, you need to have proper drainage and allow the soil to dry completely before you turn on the sprinkler or the garden hose, as this can lead to root rot and yellowing leaves. Some use hydrogen peroxide as a treatment in the water, but this is not recommended for regular use. The hydrogen peroxide will stimulate rainwater but only do this occasionally. A filtration system might also be valuable for removing nitrates, salt, and lead that might be contained in the water.

Some signs that the plants are not getting enough water are the brown tips on the plant. These species are very sensitive to boron and fluoride that are usually found in tap water, and you might be able to see that they have too much of the minerals when the leaves begin to droop. When the Dragon blood tree is underwatered, the stems also show wrinkles. The leaves can become brown, crispy, and start to dry out. When this happens, water as soon as possible. Another thing about overwatering is that if this happens, then root rot can begin to set in. You need to remove all the damaged roots from the soil, especially if they appear mushy, fragile, and black. To help with these issues, it's important to cut off a larger part of the root. Overwatering can also leave the leaves looking brown and ready to fall off. This can happen very early, so you should drain the excess water and wait for the soil to dry before watering to help the plant recover. Throw away the soil from the pot if there are signs of root rot. Clean everything thoroughly and make sure to put in the pebbles so it will help with proper drainage. Discard any excess water at the base of the pot if you notice tan rings or reddish-brown spots on the leaves.

The Dragon blood tree is a relatively tough species that is pretty tolerant to drought. This is why you need to water this only about every 1-2 weeks when you feel the soil is bone dry, especially if it is planted in a pot. Water generously until you see that the water begins to trickle down the pot's drainage holes. Make sure to remove the water from the saucer after an hour, and don't let it stand on the pot. When they are planted in your garden, you need to consider the rainfall the plant is receiving. The roots don't like to sit in the water, so make sure to have proper irrigation as part of the landscape. Water 1 time every 2 weeks, especially if you live in a tropical area with plenty of rain and monsoons.

As a general rule of thumb, you should water Dragon blood tree when you notice that about 2 inch of the top soil is already dry, especially when you grow it outdoors. When planted in the garden, you need to make sure that the Dragon blood tree is getting its watering needs at least once every two weeks. There’s rainwater, seasonal changes, and moisture around the environment to consider so never overwater. This can also apply when the pot is approximately 2 inches dry when it is grown indoors. If they are inside the house or grown in the nursery, try watering more frequently at least once a week since they might not be able to get the rainwater or extra moisture that they need indoors. As long as you notice that the plant leaves are sagging, then don’t hesitate to give them a drink. The roots should be kept moist but not soggy. The best way to water them is to soak the pot and allow the water to drain. Make sure to water only when the soil is partially dry, and don't give them a specific schedule. They are not very thirsty plants, so wait a couple of days before giving them a drink. Well-draining soils can also help them grow and always put them in place with high humidity. Water them every 1 to 2 weeks during the summer when it’s very hot outside. During the growing season and in spring, use the same amount of water as well. They need a lot of water when they are growing so you might want to give them a drink regularly. If it’s winter or fall, know that you should only water every 2 to 4 weeks. This is when you notice that the soil is completely dried out.

Most of the time, schedules of bi-weekly or weekly watering should be more than enough for the Dragon blood tree. Wait until the soil is 2 to 4 inches dry, especially if you have adult plants, to avoid excess watering. Pour generously until you see that the water comes out of the drainage holes. No standing water should be allowed, and remove the excess from the saucers. Root rot can happen if there's too much water, so it's always better to give too little than too much for this species. The soak and dry method is more than enough for the plants whether they are indoors or outdoors. The soil around the plant should be completely soaked and make sure to record on an app or in your calendar each time you water. Allow the soil to dry to prevent root rot and help them develop a healthier root system. Water with a sprinkle or a can deep enough to reach the roots to prevent the plant from wilting.

The soil bed or the pots should be moist during the spring or fall. However, prevent them from getting soggy. Reduce watering during winter or towards the end of the fall. Remember that soil that's too dry or too wet might result in plant issues. Allow the Dragon blood tree to dry out before watering, especially in the winter. When there's too much dryness in the soil, use distilled water and saturate them thoroughly. Avoid cold water as much as possible. Occasional misting during the summer or the winter, as well as fertilizer in the spring, can help.

Water at least twice a week during its growing season, and you'll find that they can grow quicker. When they are in their early stages, the Dragon blood tree is very sensitive to the minerals in tap water, so it's best to expose them to rainwater or filtered water. While they are young, exposure to unnecessary chemicals can result in stunted growth and discoloration. A balanced fertilizer and watering whenever the soil is dry can help during the growing season. In the growing season, the watering should be 1 to 2 times a week. When it's already established, you might want to water it once every 3 weeks. When you report a grown Dragon blood tree, you need to water the soil well to make it damp. You can also wipe the leaves with a wet cloth to keep the insects away and to help them have more humidity during summer.

Depending on the location of the plants, it's best to water them frequently when they are indoors. Just make sure that they are far away from any heating appliances. The natural humidity of the room can be enough, but the plant might prefer the high humidity outdoors during the summer, especially if it resembles that of a rainforest's habitat. Water the plants once every two weeks and lightly mist them at least thrice every seven days to keep them healthy if they are planted in a pot. One way of checking it is by removing the pot and seeing if the roots are already dry. This is possible with plastic pots, but you can always check with a moisture meter if you can't remove the pot. When grown outdoors, you need to consider the plant's rainwater, especially in spring and summer. You might want to water this once every 1-2 weeks during the summer. Avoid watering this during the late fall and winter, and only provide them a drink when you see brown spots on the leaves. They only need occasional watering when planted in your garden, and you need to transplant them indoors so they can survive the cool conditions during the winter. Some use a lot of mulch during the fall, but when growing in a cold zone, you should consider digging it and transplanting it, watering it occasionally, and waiting for the frost to pass.

The Dragon blood tree loves high humidity and thrive in it. However, winter is when the humidity is low, and the indoor ones are more susceptible to wilting. Lightly mist the leaves with sprays so you can maintain the healthy growth of the plant in the spring and summer. It would also help to place the plants on trays that are filled with water and pebbles to create humidity around the Dragon blood tree during winter but make sure to drain the saucer afterwards. A high-quality humidifier might also help during winter. Also, use cold water on the plants during winter as this can cause permanent damage and root shock. Allow the water to warm at room temperature before you put it on the plants. Using heating appliances can dehydrate indoor air, so you might want to add more mist. Place the pots near it and let them absorb the mist. Use bottled distilled water whenever possible since these are sensitive to fluoride. When you notice that the tips begin to turn yellow, this is where you might want to do the light misting several times a week. Another thing is when you're using tap water from the local supply, just let it sit overnight. This will reduce chlorine and other chemicals that might be mixed into the water. Distilled water is always the best alternative. During the summer, be careful with overwatering. The brown tips suggest that there's not enough moisture in the air, and you should add some when the Dragon blood tree shows an indication that it’s thirsty.

Watering the Dragon blood tree will help them grow beautiful foliage. This species can bring beauty all year round, and you might want to ensure that the leaves remain green regardless of the season. Watering it according to its needs can prevent many problems often associated with too much soil moisture. You can prevent root rot, fungal diseases, and brown tips on the potted plants and those planted on the ground. It's best to use a watering can with tepid water when you notice that the soil is dry on the ground and in the pot. Use lukewarm water and look for signs of yellow foliage. The yellowing leaves are typically a sign that this species needs water. On the other hand, the brown tips indicate that you might be overwatering, so it's best to stop and give the soil time to dry regardless of whether they were planted outdoors or indoors.

Dragon blood tree, like most other evergreen trees, absolutely need to be pruned in order for them to grow as happy, healthy trees. Of course, there are lots of reasons that pruning is important, so we’ll talk about those in greater detail. Pruning opens up the inner canopy to airflow and sunlight. Without keeping these pathways open, the inner canopy will be starved of sunlight and air. Therefore, pruning your Dragon blood tree is not only advantageous, but it also weakens the impact of pests and infections by separating branches from one another. These benefits are far too easy to reap with Dragon blood tree to neglect them. Aside from keeping your Dragon blood tree happier and healthier, pruning just makes things look nice and tidy. Who doesn’t love a well-kept tree, anyway?

Dragon blood tree can be pruned at different times depending on whether they’re grown indoors or outdoors. For outdoor trees, pruning and trimming should be done when the tree is not actively growing; this generally falls under the colder months of winter, but can vary depending on where you live. However, if you’re growing your Dragon blood tree indoors, there are lots of different times of the year when it’s okay to trim lightly. For example, if you’re planning on trimming a bit off the top of just one or two smaller branches, then you can trim nearly anytime. For heavier pruning on indoor Dragon blood tree, it’s best to wait until those same colder months when outdoor Dragon blood tree wouldn’t normally be actively growing. Dragon blood tree should be pruned as needed. Typically, these trees should be pruned to remove any damaged, yellowing, dying, or dead foliage. It is also necessary to prune this plant to remove any shoots that are congested or are crossing.

In order to keep your Dragon blood tree growing strong, remove any branches or debris that landed at the base of the tree. Keeping the area clear can prevent weeds and underbrush from crowding out the tree, especially if it’s young. Another great tip is to use raw, organic honey to treat large open wounds on the Dragon blood tree where branches were trimmed. The use of honey prevents any pathogens or potential pests from making their way in. It’s also a good idea to water a little extra after pruning for a week or two. Providing them with a little extra water helps them build natural calluses over the exposed core faster, so they can get back to growing into large, Dragon blood tree!

While most of the Dragon blood tree won’t need to be pruned until they develop some substantial height, sometimes their branches get a little carried away in the wrong direction. This is why this part of the Dragon blood tree needs to be pruned in good time. Tools In order to prune your Dragon blood tree properly, you’ll need the proper pruning tools. While smaller plant shears and garden scissors may not cut it (pun intended), handheld clippers, pruners and loppers will certainly help out. For very tall branches that are out of safe reach, use a pole saw with the necessary safety equipment. It’s also a good idea to wear gloves while pruning to avoid any splinters or cuts in general. How to Prune To prune your Dragon blood tree, first cut away any dead, dying or diseased branches. Look for pests, irregular growth patterns, and brittle branches or leaves. Snip these off at the branch collar, where the branch intersection is, without scoring the main branch. Next, be on the lookout for extra long branches or leaves that may not be able to support a lot of weight. These branches or leaves will be too heavy and grow downwards, so this can be trimmed back if necessary. Try to find all of the branches that grow either directly up (that are not the primary trunk) and those that grow directly downward. These branches will become an issue because they can effectively block out light and air from inner branches. Trim these back to the branches they stem from as well. If there’s not much space within the canopy for light to reach the center of the tree, you can trim away some excess foliage to make windows for light to shine in.

Tropical ornamental plants that prefer full sun need a minimum of 6 hours of direct sunlight per day. These plants are adapted to growing in areas with intense, direct sunlight and require this type of light to thrive. In their natural habitats, they are often found growing in open fields or along the edges of forests, where they receive ample sunlight throughout the day.

If tropical ornamental plants that prefer full sun do not receive enough sunlight, they may become leggy and weak. They may also develop yellow or pale leaves, and may stop producing flowers. Over time, these plants may die if they are not given the amount of direct sunlight they need.

While tropical ornamental plants that prefer full sun need a lot of direct sunlight, they can be damaged by too much sun. If these plants are exposed to intense sunlight for prolonged periods, they may develop sunburned leaves or brown spots. They may also become dehydrated if the soil dries out too quickly in full sun.

To protect tropical ornamental plants that prefer full sun from excessive sunlight, it is important to choose a location that gets plenty of direct sunlight but also has some protection from the hottest part of the day. If you are growing these plants in containers, you can move them to a more shaded location during the hottest part of the day to protect them from the sun's rays. You can also provide some shade by using a shade cloth or umbrella during the hottest part of the day.

It is important to gradually acclimate tropical ornamental plants that prefer full sun gradually to direct sunlight, especially if they have been grown indoors or in a shaded area. Start by placing the plant in direct sunlight for an hour or two each day, gradually increasing the amount of time it spends in direct sunlight over a period of several days or weeks. Be sure to keep an eye on the plant's soil moisture levels when it is exposed to full sun. These plants may require more frequent watering in full sun than they would in a more shaded location. Use a moisture meter or check the soil with your finger to determine when the plant needs to be watered.

For this tropical plant to thrive, you’ll want to keep them between 75℉ and 90℉ (25-32℃). Each species can handle temperatures outside of this range, but keeping it within several degrees of these limits will ensure they grow to their maximum potential. As for its extreme temperature limits, any environment below 50℉ (10℃) or above 95℉ (35℃) will begin to hinder its growth and cause various aberrations to its leaves and stems. This is especially true with low temperatures; even a light frost can cause your tropical plants to perish. Cellular death can begin to happen at a rapid pace, with some species dying in as little as 12 to 24 hours.

While Dragon blood tree doesn’t require any changes in temperature to enter different growing phases, it is important to stay consistent. Wild temperature fluctuations can slow down its growth regardless of its current phase, so it's always better to keep them in a controlled environment. That optimal temperature range of 75℉ and 90℉ (25-32℃) is vital to maintain, especially staying above the lower limit. Going above 90℉(32℃) isn’t ideal, but as tropical plant it won’t suffer too much. On the other hand, going below 50℉ (10℃) (and especially 40℉/5℃) will begin to directly damage this heat-loving plant species.

Dragon blood tree does not need different temperatures for different growing seasons. The most important step in seasonal care is to keep the environment within the optimal temperature range. That's why it's always best to keep this plant indoors. That way, you can control the temperature no matter what the climate is like outside. Light is also important for tropical species, with all of these plants preferring a partial side level of sun exposure. This means any light they receive needs to be dappled or filtered, with bright but indirect light being the best option when growing your plants indoors. Too much direct sunlight can negatively affect your plant’s leaves, reducing its growth potential.

Tip #1: Don’t Leave Your Plant Near Windows in Colder Months If you want to make sure your plant isn’t exposed to colder temperatures, you may want to keep them away from windows. In colder months like late fall and winter, even the smallest draft can leak cold air into your home through cracks in your windows. While this air usually dissipates and warms up as it travels throughout your home, any plants placed in close proximity to the window will be affected. Move your tropical plants into an area where they will still get bright but indirect light, while making sure they won’t be affected by potential drafts. Tip #2: If You Find Dry Patches, Your Plant May Be Getting Too Much Sunlight or Heat You may notice the leaves become white or even scorched on a sunny day. These discolorations and unusual markings usually indicate that a plant is getting too much heat or sunlight, and it may be dehydrated. Excess light and heat will dry out the soil, stopping plants from getting the moisture they need to support their cellular structure. It also slows down or stops the process of photosynthesis, further hindering growth. If ignored for too long, these dry spots can spread and eventually result in the death of your plants. Tip #3: Avoid Frost at All Costs Colder temperatures and frost can damage your plants by causing ice crystals or disrupt normal physiological activity. This makes it nearly impossible for water to move freely throughout plant tissue, creating a deficit of moisture in their stems and leaves. You can tell a plant has been damaged by frost if it begins to suffer from hydrosis (it will appear as though it's soaked with water.) If the problem persists, your plants may begin shriveling and turning a dark brown or black hue. After that, the plant will almost certainly die.

The best way to maintain the right temperature range for Dragon blood tree is by keeping an eye on both the climate and humidity. You’ll want to try to keep each species in a room where you have access to climate control, keeping the heat in the temperature range best mimics its natural habitat. The humidity levels will also have a direct effect on temperature, so it's important to monitor these as well. You can artificially raise the humidity of your growing space by using a humidifier or lightly misting the leaves with water. If you intend to grow this species outside, you may find it difficult to maintain the right balance of temperature and humidity. If temperatures begin to drop or the air becomes too dry, your best option is to find room within your home and move your plant inside. An indoor growing space will allow you to control the climate more closely, helping your plant reach its full potential.

The primary reason why Dragon blood tree needs regular fertilization is that they have showy leaves that require a lot of energy to produce and maintain. The challenge is that your Dragon blood tree must not only allot enough energy to keep its leaves in good shape, but it must also find enough energy to support the growth of its stems, branches, roots, and all its other vital structures. If you neglect fertilization, there are two outcomes that are likely to take place. The first is that the leaves of your Dragon blood tree will begin to lose their natural color or texture while looking somewhat unhealthy overall, which detracts greatly from its ornamental appeal. The other outcome is that your Dragon blood tree will begin to slow its growth overall or produce weak growth that could be prone to breakage.

Dragon blood tree will benefit from occasionally feedings , which is why you do not need to set a standard feeding schedule upon planting one of these plants. One of the easiest ways to fertilize your Dragon blood tree is to simply apply your fertilizer when you water this plant sometimes. During the growing season, your Dragon blood tree will also need a decent amount of water. You could feed this plant once every two-three weeks. This feeding rate should continue during the entire time that your plant is producing new growth.

Throughout most of the year, it is permissible to maintain a regular fertilization schedule for your Dragon blood tree. During the active growing season of spring, summer, and early fall. However, during the winter, this plant should not receive fertilizer at all. During winter, Dragon blood tree will enter a dormant growth phase. In that phase, the plant will either put forth no new growth or very little new growth. That lack of active growth means that your Dragon blood tree will be using less energy overall, which is why fertilization is not needed at that time.

The fertilizer for a Dragon blood tree has a specific blend of nutrients, each of which is present in relatively low amounts. An ideal fertilizer will have an N-P-K ratio of 3-1-2. However, a general-purpose fertilizer that has an even blend of nutrients can work well in some cases. Still, even when using a balanced fertilizer, the ratio number representing the volume of each nutrient should be at 3 or lower. The fertilizer you use can be either granular or liquid based. If you choose to use a liquid-based fertilizer, it is often best to dilute the strength by half. While there is not much downside to granular fertilizer, it is often most sensible to use liquid fertilizer, especially if you feed your Dragon blood tree while you supply water.

One of the easiest ways to fertilize a Dragon blood tree is to feed it anytime that you water it. To perform this method, gather your fertilizer and a water container, such as a watering can. Then mix the fertilizer with water to dilute its strength. Then, simply pour the water with the fertilizer onto the soil and allow it to soak down to the roots. Alternatively, you could use a granular fertilizer. If you use a granular fertilizer, all you need to do is sprinkle some of the fertilizer on the soil in which your Dragon blood tree lives. Granular fertilizers are usually slow-release fertilizers which means you won't need to fertilize as often as you would with a liquid fertilizer. In either case, it is beneficial to water while you feed your Dragon blood tree.

The signs of improper fertilization for a Dragon blood tree should become obvious relatively quickly. Overfertilization is specifically harmful to this plant, and it can cause several visible signs. The most common signs are browning leaf margins, yellowing leaves, wilting leaves, excess fertilizer build-up in the soil, and loss of foliage. Dragon blood tree are also vulnerable to a complication known as fertilizer burn, in which a plant receives too many nutrients, which causes the roots to dry out and cease their main function. However, if you give your Dragon blood tree water while you feed it, it is far less likely that fertilizer burn will occur.