Also known as : Three-cornered palm, Three-sided palm
The triangle palm is a remarkably attractive palm tree native to Madagascar. It gets its common name because of the triangular shape formed by the three unique points from which its fronds emerge. It's a popular choice as a showpiece due to its dramatic presence in any landscape.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Common Pests & Diseases About Triangle palm
Feedback
Common issues for Triangle palm based on 10 million real cases
Anthracnose
Anthracnose causes grey-brown spots with black margins on leaves and stems.
Solutions: For less serious cases when only a few leaves are affected, complete the following: Prune affected leaves. Using pruning shears, remove leaves that have spots. Dispose of these leaves to avoid spreading the disease to other plants. Clear debris. To stop the spread of disease, remove debris and weeds from around plants. For serious cases when many leaves are infected with large splotches: Apply a fungicide. Fungicides won't cure current infections, but they will prevent anthracnose from spreading to uninfected tissue. Apply a fungicide before a dry period following product instructions. Products containing copper diammonia diacetate are most likely to be effective.
Underwatering
Leaves may wilt for a variety of reasons.
Solutions: The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with. Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock. In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Solutions: There are several easy ways to remedy the nutrient deficiencies in soils. Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies. Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy. Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly. Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Anthracnose
Anthracnose causes grey-brown spots with black margins on leaves and stems.
Overview
Anthracnose is a group of fungal diseases that affects foliage, twigs, and stems. It can affect a wide variety of plants including trees, shrubs, vegetables, grasses, and flowers and is most likely to occur in cool, wet conditions. It often occurs in the spring when rain splashes on overwintering fungi.
Some varieties of plants are bred to be resistant to anthracnose. If plants are not resistant, they can become infected year after year. Plants can also recover from infection only to be reinfected later that year.
In most cases, anthracnose only causes minor damage. However, young plants are susceptible to major damage. In the worst-case scenarios, this disease can cause major defoliation.
Symptom Analysis
Plant leaves will show gray or brown blotches that may be surrounded by black edges. Blotches may be only one small spot or many spots that cover an entire leaf. If these symptoms progress, leaves may drop prematurely.
Anthracnose can also cause small lesions on twigs and stems. These often appear as brown, gray, or orange blisters. If left untreated, twigs may drop.
Disease Cause
Anthracnose is caused by one of several possible fungi. These pathogens overwinter on plant debris. When water hits these fungi in the spring, spores release and land on plant tissue. When the spores germinate on leaf or twig tissue, they cause anthracnose symptoms.
These fungi need moist conditions to live. Therefore, they will not be a problem in dry conditions.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Underwatering
Leaves may wilt for a variety of reasons.
Overview
Underwatering plants is one of the quickest ways to kill them. This is something that most gardeners are well aware of. Unfortunately, knowing exactly how much water a plant needs can be tricky, especially considering that underwatering and overwatering present similar symptoms in plants.
Therefore, it’s important to be vigilant and attentive to each plants’ individual needs.
Symptom Analysis
As mentioned earlier, overwatering and underwatering present similar symptoms in plants. These symptoms include poor growth, wilted leaves, defoliation, and brown leaf tips or margins. Ultimately, both underwatering and overwatering can lead to the death of a plant.
The easiest way to determine whether a plant has too much water or too little is to look at the leaves. If underwatering is the culprit, the leaves will look brown and crunchy, while if it’s overwatering, they will appear yellow or a pale green in color.
When this issue first begins, there may be no noticeable symptoms at all, particularly in hardy or drought-tolerant plants. However, they will begin to wilt once they start suffering from a lack of water. The edges of the plant’s leaves will become brown or curled. Soil pulling away from the edges of the planter is a telltale sign, or a crispy, brittle stem.
Prolonged underwatering can cause a plant’s growth to become stunted. The leaves might drop and the plant can be more susceptible to pest infestations, too.
Disease Cause
Underwatering is caused by, quite simply, not watering plants often or deeply enough. There is a heightened risk of underwatering if any of these situations apply:
Extreme heat and dry weather (when growing outdoors)
Grow lights or indoor lighting that is too bright or intense for the type of plant
Using fast-draining growing media such as sand
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Overview
Nutrient deficiencies can be seen in many different ways on plants. Basically, the lack of nutrients will inhibit plant growth, produce weak stems and leaves, and leave plants open to infection from pests and diseases. Plants use the nutrients from the soil to help them with photosynthesis. This, in turn, produces healthy plant growth. Plants that lack adequate amounts of nutrients will look lackluster and unhealthy. Eventually, if this is not addressed, it will cause the plants to die. The most important nutrients that plants need are nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur. Additionally, plants require small amounts of micronutrients such as iron, boron, manganese, zinc, copper, and molybdenum.
Symptom Analysis
A common sign that plants are experiencing nutrient deficiencies is the yellowing of leaves. This may be an overall yellowing or leaves that are yellow but still have green veins. These leaves will eventually brown off and die.
Another sign is the loss of plant vigor. The plants may not be growing as well as they should or their growth may be stunted.
Below are some common symptoms that appear when plants are lacking in nutrients.
Nitrogen (N): Inner, older leaves yellow first. If the deficiency is severe, yellowing progresses outward to newer growth.
Potassium (K): Leaf edges may turn brown and crinkly, with a yellowing layer forming just inside of the edge. Older leaves tend to be impacted first.
Phosphorus (P): Lack of vigorous growth. Plants will appear stunted.
Zinc (Zn): Yellowing tends to occur first at the base of the leaf.
Copper (Cu): Newer leaves begin to yellow first, with older leaves yellowing only if the deficiency becomes severe.
Boron (B): Newer leaves are impacted first. Foliage may also become particularly brittle in cases of boron deficiency.
Disease Cause
There are several factors that can lead to nutrient deficiencies, a situation where plants are not receiving the nutrients that they need. This could be because they are planted in nutrient-deficient soils, or that the soil's pH is too high or low. Incorrect soil pH can lock up certain nutrients, thus making them unavailable to plants. Lack of soil moisture can also be a problem, because plants need water to be able to absorb the nutrients from the soil.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Distribution of Triangle palm
Feedback
Distribution Map of Triangle palm
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
About
Care Guide
More Info
Pests & Diseases
Distribution
Triangle palm
Dypsis decaryi
Also known as: Three-cornered palm, Three-sided palm
The triangle palm is a remarkably attractive palm tree native to Madagascar. It gets its common name because of the triangular shape formed by the three unique points from which its fronds emerge. It's a popular choice as a showpiece due to its dramatic presence in any landscape.
Hardiness Zones
10 to 11
Instantly identify plants with a snap
Snap a photo for instant plant ID, gaining quick insights on disease prevention, treatment, toxicity, care, uses, and symbolism, etc.
Plant care made easier than ever with our tailor-made smart care reminder.
Download the App for Free
Common Pests & Diseases About Triangle palm
Feedback
Common issues for Triangle palm based on 10 million real cases
Anthracnose
Anthracnose causes grey-brown spots with black margins on leaves and stems.
Solutions: For less serious cases when only a few leaves are affected, complete the following: Prune affected leaves. Using pruning shears, remove leaves that have spots. Dispose of these leaves to avoid spreading the disease to other plants. Clear debris. To stop the spread of disease, remove debris and weeds from around plants. For serious cases when many leaves are infected with large splotches: Apply a fungicide. Fungicides won't cure current infections, but they will prevent anthracnose from spreading to uninfected tissue. Apply a fungicide before a dry period following product instructions. Products containing copper diammonia diacetate are most likely to be effective.
Learn More About the Anthracnose
Underwatering
Leaves may wilt for a variety of reasons.
Solutions: The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with. Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock. In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Learn More About the Underwatering
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Solutions: There are several easy ways to remedy the nutrient deficiencies in soils. Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies. Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy. Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly. Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Learn More About the Nutrient deficiencies
Anthracnose
Anthracnose causes grey-brown spots with black margins on leaves and stems.
Overview
Anthracnose is a group of fungal diseases that affects foliage, twigs, and stems. It can affect a wide variety of plants including trees, shrubs, vegetables, grasses, and flowers and is most likely to occur in cool, wet conditions. It often occurs in the spring when rain splashes on overwintering fungi.
Some varieties of plants are bred to be resistant to anthracnose. If plants are not resistant, they can become infected year after year. Plants can also recover from infection only to be reinfected later that year.
In most cases, anthracnose only causes minor damage. However, young plants are susceptible to major damage. In the worst-case scenarios, this disease can cause major defoliation.
Symptom Analysis
Plant leaves will show gray or brown blotches that may be surrounded by black edges. Blotches may be only one small spot or many spots that cover an entire leaf. If these symptoms progress, leaves may drop prematurely.
Anthracnose can also cause small lesions on twigs and stems. These often appear as brown, gray, or orange blisters. If left untreated, twigs may drop.
Disease Cause
Anthracnose is caused by one of several possible fungi. These pathogens overwinter on plant debris. When water hits these fungi in the spring, spores release and land on plant tissue. When the spores germinate on leaf or twig tissue, they cause anthracnose symptoms.
These fungi need moist conditions to live. Therefore, they will not be a problem in dry conditions.
Solutions
For less serious cases when only a few leaves are affected, complete the following:
Prune affected leaves. Using pruning shears, remove leaves that have spots. Dispose of these leaves to avoid spreading the disease to other plants.
Clear debris. To stop the spread of disease, remove debris and weeds from around plants.
For serious cases when many leaves are infected with large splotches:
Apply a fungicide. Fungicides won't cure current infections, but they will prevent anthracnose from spreading to uninfected tissue. Apply a fungicide before a dry period following product instructions. Products containing copper diammonia diacetate are most likely to be effective.
Prevention
Since anthracnose is difficult to treat once it appears, it's important to prevent it from infecting your plants.
Remove debris. Clear all old plant material and weeds from under and around plants in the fall. This material can harbor anthracnose spores that will later infect plants.
Select resistant varieties. When adding new plants, choose varieties that are resistant to anthracnose.
Increase airflow. Anthracnose thrives in wet conditions, so space plants far enough apart to allow for good airflow.
Avoid overhead irrigation. To keep plant tissue dry, avoid using overhead irrigation. Instead, water at the base of plants or install drip irrigation.
Use a preventative fungicide. If there is a reason to suspect future anthracnose outbreaks, apply a fungicide in the early spring.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Underwatering
Leaves may wilt for a variety of reasons.
Overview
Underwatering plants is one of the quickest ways to kill them. This is something that most gardeners are well aware of. Unfortunately, knowing exactly how much water a plant needs can be tricky, especially considering that underwatering and overwatering present similar symptoms in plants.
Therefore, it’s important to be vigilant and attentive to each plants’ individual needs.
Symptom Analysis
As mentioned earlier, overwatering and underwatering present similar symptoms in plants. These symptoms include poor growth, wilted leaves, defoliation, and brown leaf tips or margins. Ultimately, both underwatering and overwatering can lead to the death of a plant.
The easiest way to determine whether a plant has too much water or too little is to look at the leaves. If underwatering is the culprit, the leaves will look brown and crunchy, while if it’s overwatering, they will appear yellow or a pale green in color.
When this issue first begins, there may be no noticeable symptoms at all, particularly in hardy or drought-tolerant plants. However, they will begin to wilt once they start suffering from a lack of water. The edges of the plant’s leaves will become brown or curled. Soil pulling away from the edges of the planter is a telltale sign, or a crispy, brittle stem.
Prolonged underwatering can cause a plant’s growth to become stunted. The leaves might drop and the plant can be more susceptible to pest infestations, too.
Disease Cause
Underwatering is caused by, quite simply, not watering plants often or deeply enough. There is a heightened risk of underwatering if any of these situations apply:
Extreme heat and dry weather (when growing outdoors)
Grow lights or indoor lighting that is too bright or intense for the type of plant
Using fast-draining growing media such as sand
Solutions
The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with.
Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock.
In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Prevention
Always check the soil before watering. If the top inch of soil feels moist, though not wet, the watering is perfect. If it’s dry, water it immediately. If it feels soggy, you avoid watering until it dries out a bit more.
Also, make sure the lighting is sufficient for the species. Plants grow faster and need more water when there is intense light or lots of heat. Being aware of these conditions and modifying them, if possible, is a good way to prevent underwatering. Many container plants are potted in soil mixtures mean to be well-draining. Adding materials that retain moisture, like compost or peat moss, can also prevent these symptoms.
Other tips to prevent underwatering include:
Choose pots with adequately-sized drainage holes
Avoid warm temperatures
Use large pots with additional soil (these take longer to dry out)
Avoid terracotta pots, which lose water quickly
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Overview
Nutrient deficiencies can be seen in many different ways on plants. Basically, the lack of nutrients will inhibit plant growth, produce weak stems and leaves, and leave plants open to infection from pests and diseases. Plants use the nutrients from the soil to help them with photosynthesis. This, in turn, produces healthy plant growth. Plants that lack adequate amounts of nutrients will look lackluster and unhealthy. Eventually, if this is not addressed, it will cause the plants to die. The most important nutrients that plants need are nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur. Additionally, plants require small amounts of micronutrients such as iron, boron, manganese, zinc, copper, and molybdenum.
Symptom Analysis
A common sign that plants are experiencing nutrient deficiencies is the yellowing of leaves. This may be an overall yellowing or leaves that are yellow but still have green veins. These leaves will eventually brown off and die.
Another sign is the loss of plant vigor. The plants may not be growing as well as they should or their growth may be stunted.
Below are some common symptoms that appear when plants are lacking in nutrients.
Nitrogen (N): Inner, older leaves yellow first. If the deficiency is severe, yellowing progresses outward to newer growth.
Potassium (K): Leaf edges may turn brown and crinkly, with a yellowing layer forming just inside of the edge. Older leaves tend to be impacted first.
Phosphorus (P): Lack of vigorous growth. Plants will appear stunted.
Zinc (Zn): Yellowing tends to occur first at the base of the leaf.
Copper (Cu): Newer leaves begin to yellow first, with older leaves yellowing only if the deficiency becomes severe.
Boron (B): Newer leaves are impacted first. Foliage may also become particularly brittle in cases of boron deficiency.
Disease Cause
There are several factors that can lead to nutrient deficiencies, a situation where plants are not receiving the nutrients that they need. This could be because they are planted in nutrient-deficient soils, or that the soil's pH is too high or low. Incorrect soil pH can lock up certain nutrients, thus making them unavailable to plants. Lack of soil moisture can also be a problem, because plants need water to be able to absorb the nutrients from the soil.
Solutions
There are several easy ways to remedy the nutrient deficiencies in soils.
Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies.
Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy.
Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly.
Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Prevention
There are several easy ways to prevent nutrient deficiencies in plants.
Regular fertilizing. Regular addition of fertilizer to the soil is one of the simplest and most effective ways to prevent deficiencies.
Proper watering. Both over and under watering can adversely impact a plant's roots, which in turn makes it harder for them to properly take up nutrients.
Testing the soil's pH. A soil's acidity or alkalinity will impact the degree to which certain nutrients are available to be taken up by plants. Knowing the soil's pH means it can be amended to suit the needs of the individual plants.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App for Free
Distribution of Triangle palm
Feedback
Distribution Map of Triangle palm
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Cookie Management Tool
In addition to managing cookies through your browser or device, you can change your cookie settings below.
Necessary Cookies
Necessary cookies enable core functionality. The website cannot function properly without these cookies, and can only be disabled by changing your browser preferences.
Analytical Cookies
Analytical cookies help us to improve our application/website by collecting and reporting information on its usage.
Cookie Name
Source
Purpose
Lifespan
_ga
Google Analytics
These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here.
1 Year
_pta
PictureThis Analytics
We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience.
1 Year
Cookie Name
_ga
Source
Google Analytics
Purpose
These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here.
Lifespan
1 Year
Cookie Name
_pta
Source
PictureThis Analytics
Purpose
We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience.
Lifespan
1 Year
Marketing Cookies
Marketing cookies are used by advertising companies to serve ads that are relevant to your interests.
Cookie Name
Source
Purpose
Lifespan
_fbp
Facebook Pixel
A conversion pixel tracking that we use for retargeting campaigns. Learn more here.
1 Year
_adj
Adjust
This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here.
1 Year
Cookie Name
_fbp
Source
Facebook Pixel
Purpose
A conversion pixel tracking that we use for retargeting campaigns. Learn more here.
Lifespan
1 Year
Cookie Name
_adj
Source
Adjust
Purpose
This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here.