Careful observation of the plant will tell you if you have watering issues. If you overwater your plant you’ll notice:

a. The leaves of the plant can appear yellow and are prone to yellow-brown patches at the tips of the leaves.

b. If the situation is serious, severe drooping and curling of the leaves may be observed. This is due to the fact that overwatering can cause root rot and the plant is already having a hard time absorbing more water.

If your Zebra Plant is planted indoor, overwatering is all too easy to do with the plant as it cannot tolerate any standing water. The earlier you notice the overwatering the better. If you see standing water or some leaf change, stop watering! Allow the soil to air out over the course of 3-5 days.

If you’re noticing signs of root rot, you’ll need to act fast. You’ll have to remove the plant from the pot or ground and then wash off the roots. Remove any dead or decaying roots while trying to keep as much intact as possible. Throw out all the old soil and clean out the pot then add in new soil. If you’re planting in your garden, remove the old soil and replant it in a new location.

While overwatering is an issue, so is underwatering. The Zebra Plant is very sensitive to drought conditions and will quickly decline if they don’t receive consistent watering. Signs of underwatering include:

-Curled, pendulous, lifeless leaves;

-Some leaves will gradually turn yellow from the bottom;

-The edges of the leaves will turn brown.

Underwatering tends to be easier to fix than overwatering. Simply increase how often you water the plant. If your plant is drying out quickly, the air might be too dry. Consider increasing the humidity so the soil stays moist for longer. You might also think about moving the plant to a different location if you notice it is getting too much sunlight or the spot is too hot in order to prevent extra evaporation.

Generally speaking, you should water the plant around once per week during spring. However, compared to spring you should increase the watering frequency during the summer but decrease that in winter. However, the timing might change based on a variety of factors such as humidity, temperature, soil type, and so on.

To further determine the appropriate watering frequency for your Zebra Plant, you should use your finger or Soil Moisture Meter more often to check the soil condition, remember to keep the soil moist but not soggy. Water after the top 1.5-2 inches or so of soil has dried out and build the watering schedule for your Zebra Plant by continually testing. Potted plants are more prone to being overwatered than their outdoor counterparts since it's easier for the water to become contained. Make sure you use a pot with proper drainage holes and well-draining soil. Make sure there’s no excess water in the plant tray before watering.

If your Zebra Plant is planted in the ground, rain will allow it to grow better. The Zebra Plant usually needs about 1 inch of rain per week to maintain growth. If rainfall is low, you may need to do additional watering once a week to ensure proper plant growth.

Humidity also plays a role in keeping the plants properly watered. Plant can grow in normal room humidity, but it prefers higher humidity if possible - generally around 40 to 60 percent. More humidity means the soil will stay wetter for longer. With indoor plants, you can increase the humidity by placing a small humidifier next to the plant. For outdoor plants, you can mist the plant throughout the day.

There are plenty of viable ways to supply your Zebra Plant with water. If you grow your plant in an indoor pot, for the Zebra Plant in small pots, you can bring your potted plant to your kitchen sink. Then, use the faucet to add water to the container. By holding the pot in your hands, you should easily notice when the water begins to run through the pot’s drainage holes, at which point you can stop watering. The cold temperature will hurt the plants' root system, so please don't do this during winter or in cold climates. Most of the time, watering via your faucet is permissible for the Zebra Plant. However, if the local tap water contains a high proportion of fluorine, chlorine or salts, you should consider using rainwater or lake water.

Also, since the Zebra Plant can respond well to overhead watering and watering directly into the soil, you can use a watering can, hose, or just about any tool you’d like to water it.

For Zebra Planted in the ground, when there is not enough rain, aim the hose at the root system and open the spout for more than 10 minutes to fully water.

Tips:

The Zebra Plant is quite sensitive to the water you use. They are used to soft, acidic water found naturally. If you live in an area with hard water you can use an at-home water filter to remove any minerals and salts. To get rid of chemicals, you can let your tap water sit out for around 24 hours so that they dissipate. You can also purchase filtered water for your plants. Zebra Plant likes water with 6.5 pH the best. Rainwater is a better choice than tap water, so you can store some rainwater when it's raining for your Zebra Plant.

Zebra Plant needs the humid conditions tend to keep the plants moist. They do not dry out completely between waterings. However, if soggy is retained, it will tend to make its root system rotten. So people will always water after the top 1.5-2 inches or so of soil has dried out. The depth of testing is often related to the depth of the soil. When the soil depth is around 5 inches, it is recommended to test about 1.5 inches or so (about one-third of the soil depth), and more for larger pots. If you have a Soil Moisture Meter, then watering becomes easy by inserting the same position and when the soil meter is found to be around 3, then watering can be done. If it is still greater than 3 then you will need to wait a little longer until it dries out. Keeping it this way will allow you to avoid overwatering your plants.

Pruning your Zebra Plant is a fairly simple process. First, you will need a reliable set of hand pruners or hedge trimmers. You may use a clean pair of sharp scissors if you don’t have pruners or garden shears on hand. It’s important to always clean your gardening tools before and after using them to prevent the possibility of spreading disease or infection to other plants. To prune your Zebra Plant simply allow your plant to go dormant over the Winter. Some time between late winter and early spring – or when new growth starts to appear – take your clean pruners or trimmers and cut away any dying, damaged, yellow or declining foliage. Repeat this process until you reach the base of the plant or until there are no dead pieces left to cut. When pruning, be careful not to damage the new growth that may be emerging near the base of your plant. These parts cannot be restored and pruning can increase the ventilation of the plants and facilitate their growth. Any pruning that is done to this plant should be cut straight across the blades or stems. No angled cuts are required. Diseased leaf blade foliage can be removed as it appears. This could be done anytime when your Zebra Plant is growing.

Once you’ve pruned your plant, you should dispose of the stems and leaves either by composting the healthy ones or throwing out the diseased parts. You can also fertilize just before or after pruning, which gives Zebra Plant a little vitamin boost that can provide it the nutrients needed to better protect itself from any nearby pathogens or diseases. Do not water the Zebra Plant immediately after pruning as this can lead to fungal infestation of the plants through the wounds. You don’t need much after care when you’re done pruning. It might benefit from light watering and some liquid plant food to encourage new growth.

Early spring and late winter are the best times to prune your Zebra Plant on a large scale. If you want to control the size of your Zebra Plant, you can prune them as you wish, but be careful not to prune more than a third of the size of the plant. Yellow and diseased leaves may appear during the summer months when the Zebra Plant is growing vigorously and these types of leaves need to be pruned back immediately. These parts of the Zebra Plant cannot be restored and pruning increases the ventilation of the plant and facilitates its growth.

Strategic pruning is usually done at different times of the year or during certain stages of growth depending on the plant. However, knowing when to prune your Zebra Plant depends on where you live and how established your plant is. For example, if your Zebra Plant is a new resident, it’s a good idea to wait until the plant starts to grow back before you start pruning. On the other hand, if your plant is already established, you will want to prune the dry or dead parts in plant before new leafy growth appears in early spring or late winter. This is the time of year when plants are dormant and pruning causes the least damage to them. This is also the best time of year to do more extensive pruning. It’s important to note that if Zebra Plant is pruned too late in the season, it can leave new growth at risk for damage or disease. However, if your Zebra Plant is indoors this is not a problem and you can prune at any time. Since this can affect the long-term health and appearance of your plant, it’s important to keep this in mind when deciding when and how to prune. As your Zebra Plant grows larger over time, you can trim it as needed after annual pruning. Dead, damaged, or diseased leaf blade foliage can be removed as it appears. This could be done anytime when your Zebra Plant is growing.

Zebra Plant typically needs full, indirect sunlight in order to thrive indoors. This means that the plant should be exposed to bright sunlight that doesn’t hit it directly from a window or another light source, like a grow light. You can easily protect it from direct sunlight by placing a sheer curtain between your Zebra Plant and the window, or by placing it behind a part of the window with a dark screen.

If this is your first time bringing your Zebra Plant home, then it might be a good idea to try to ease it into the sunlight it needs, rather than place it in bright, indirect light right away. Over the course of two weeks or so, you can slowly move your plant into the sunlight to avoid shock or burning of the leaves from sudden intense light exposure. By easing it into the light, your Zebra Plant is much more likely to adapt to your home environment well.

Zebra Plant is one that can easily sunburn with too much sunlight. In the wild, these plants only receive mild, dappled light, filtered down from tree canopies. While they need more light than that to grow in our homes, too much can certainly cause issues. If your Zebra Plant is getting too much light, you’ll notice that the foliage begins to look bleached or washed out, the tips of leaves may turn yellow or brown and crispy, and it may even grow too quickly to support itself.

Sunburn for plants is much less severe than sunburn for people. While it may look unsightly, crispy, burnt leaves can be removed if they’re too far damaged to recover, or over half of the leaf is damaged. However, you can also try trimming back the leaves just to remove any sunburn damage in an effort to save them, if there’s not too much discoloration. Move your Zebra Plant away from its light source to avoid future light damage.

While some plants may be ready to face the sweltering sun straight out of the ground, Zebra Plant needs some time to build itself up enough to tolerate bright light. Propagated cuttings should receive only moderate indirect light, while new leaves during the growing season should be shielded a bit as well. The tender new leaves are more prone to sunburn than any other part of the plant.

Fortunately, plants can communicate in their own language to convey whether they have adequate sunlight or not. Like most plants, your Zebra Plant will tell you if it isn’t getting enough sunlight. The most visible sign is when your plant becomes particularly dark, or there is no new growth on the plant from one season to the next. You’ll also notice that leaves that do grow in may remain smaller than others, since there isn’t enough light to photosynthesize to support large new leaves.

Depending on how bright the sunlight is that your Zebra Plant gets, the number of hours in a day may vary. If you have your plant in bright, indirect light, then there’s no need to try to restrict or increase the amount of time your plant gets this light each day. However, if light is less bright or further away from your Zebra Plant, then you can try to aim for at least eight hours of full light per day.

Colder temperatures can affect plants since they have the same temperature as the air around them. When they are exposed to the sun, they can start to get warm again, but this is not the case during winter. The temperature range for the Zebra Plant is often 70~85℉(21~30℃). They might tolerate 20~30℉(-6~0℃) even 15℉(-10℃), but not for long since this can result in frost damage. Maximum temperatures should be around 70~85℉(21~30℃), but make sure that you spray them with water from time to time and give them some shade to prevent wilting.

Do some research and make sure that the temperature is right when growing Zebra Plant. Some growers might consider decreasing the plants' thermostats during the growing season to reduce HVAC costs. However, it's vital to understand that the temperature can affect the flowering, pest management, and quality of the plants.

There will be a temperature point where the Zebra Plant will stop growing, and this can happen during the winter when some species might go into a dormant state. The base temperature becomes warmer when the season changes and the Zebra Plant can grow faster. The species that are naturally growing in warm habitats have higher optimum temperatures when you compare them to the ones that thrive in a cooler climate.

When the seeds of Zebra Plant are exposed to cool temperatures, this can cause a decrease in uniformity and delays. You might also want to lower the temperature during flowering but not at other phases. Cooler temperatures at night will also require less water, so adjust the irrigation as needed.

Stop fertilizing the plant to avoid new growth and allow the old ones to become hardy. This way, they can endure colder temperature when it begins to drop. To keep them warm, you can build structures around the Zebra Plant like cages or trellises. There are also options to use heat mats that can gently warm the soil since they can consistently maintain an ideal temperature range for the Zebra Plant.

During winter, you can protect the Zebra Plant from frost by covering it with cloths, tarps, burlaps, sheets, or plastic buckets. Make sure to keep them down so they continue to act as insulators and the wind will not blow them away. However, ensure that the plastic sheets or burlap covers should not touch any part of the fruit or foliage, or the cold temperatures can transfer to the material and cause burns. When the temperatures begin to rise during the daytime, remove the covers.

When growing the Zebra Plant in spring, you might want to increase humidity since the air temperature tends to be cooler at this time. A dry temperature can be a stressful growing environment for various species, which can help. If summer arrives, the large cover of the greenhouse and the warm temperature will mean that there will be a higher humidity level in the air. Some signs to look for are the condensation that is often found on the walls of the greenhouse, and this can cause issues with pollination and the development of infections when the water begins to fall on the leaves. Make adjustments according to the temperature and do some spraying during the hotter days of the year.

Generally, the first cold snap can destroy the Zebra Plant and others might go into a dormant state when the temperature is low. Some plants can get chilled when the temperatures range from 20~30℉(-6~0℃). They can freeze when the temperature begins to drop below 32℉(0℃). Those species that hide most of their parts under the soil might lose their structures above ground, but they can recover in spring. Some of the associated issues with too low temperatures are the lack of availability of resources like water, and nutrients, and those subtropical plants can suffer when the temperature reaches below 20℉(-6℃). The plants can also get damaged because of extreme heat stress when it's too high. This can reduce the transpiration rate that can affect the growth and productivity of Zebra Plant.

You need to cover the plants at night since these can add about 5 degrees more to protect the species from frost and freezing temperatures. The cloth rows can work well as blankets and ensure that there are no openings where the heat could escape.

When using the covers, avoid the plastic from touching the foliage because this can cause the Zebra Plant to freeze. Remember to keep the covers during the day and stop using heat pads during the summer. It will always be worth the effort to protect the cold-intolerant plants from freezing temperatures to help them survive.

If you prefer not to use a heat pad, bring the Zebra Plant inside, especially if it's freezing outdoors. During spring, consider the ones you need to bring indoors and plant them in moveable pots and containers.

Most often, the ones caring for the Zebra Plant will grow them in greenhouses. This is because they can provide adequate temperature in these areas that won't affect the photosynthesis process of a specific process.

Some install the proper HVAC systems to control the temperatures of Zebra Plant. This can handle many species' cooling and heating needs, especially during the summer and winter. They generally place the cooling or heating pad under the plants rather than above to achieve their desired temperatures.

If outdoors, you can protect the Zebra Plant from frost by covering it with cloths, tarps, burlaps, sheets, or plastic buckets.

Heat mats are often left on Zebra Plant to set the temperatures at a more consistent level. When the weather becomes warmer during the day, you can remove them, especially if the species are exposed to the sun. Put the pads away once the plants are established and when they start growing flowers and fruits.