Careful observation of the plant will tell you if you have watering issues. If you overwater your plant you’ll notice: a. The leaves of the plant can appear yellow and are prone to yellow-brown patches at the tips of the leaves. b. If the situation is serious, severe drooping and curling of the leaves may be observed. This is due to the fact that overwatering can cause root rot and the plant is already having a hard time absorbing more water. If your Furry Feather Calathea is planted indoor, overwatering is all too easy to do with the plant as it cannot tolerate any standing water. The earlier you notice the overwatering the better. If you see standing water or some leaf change, stop watering! Allow the soil to air out over the course of 3-5 days. If you’re noticing signs of root rot, you’ll need to act fast. You’ll have to remove the plant from the pot or ground and then wash off the roots. Remove any dead or decaying roots while trying to keep as much intact as possible. Throw out all the old soil and clean out the pot then add in new soil. If you’re planting in your garden, remove the old soil and replant it in a new location. While overwatering is an issue, so is underwatering. The Furry Feather Calathea is very sensitive to drought conditions and will quickly decline if they don’t receive consistent watering. Signs of underwatering include: -Curled, pendulous, lifeless leaves; -Some leaves will gradually turn yellow from the bottom; -The edges of the leaves will turn brown. Underwatering tends to be easier to fix than overwatering. Simply increase how often you water the plant. If your plant is drying out quickly, the air might be too dry. Consider increasing the humidity so the soil stays moist for longer. You might also think about moving the plant to a different location if you notice it is getting too much sunlight or the spot is too hot in order to prevent extra evaporation.

Generally speaking, you should water the plant around once per week during spring. However, compared to spring you should increase the watering frequency during the summer but decrease that in winter. However, the timing might change based on a variety of factors such as humidity, temperature, soil type, and so on. To further determine the appropriate watering frequency for your Furry Feather Calathea, you should use your finger or Soil Moisture Meter more often to check the soil condition, remember to keep the soil moist but not soggy. Water after the top 1.5-2 inches or so of soil has dried out and build the watering schedule for your Furry Feather Calathea by continually testing. Potted plants are more prone to being overwatered than their outdoor counterparts since it's easier for the water to become contained. Make sure you use a pot with proper drainage holes and well-draining soil. Make sure there’s no excess water in the plant tray before watering. If your Furry Feather Calathea is planted in the ground, rain will allow it to grow better. The Furry Feather Calathea usually needs about 1 inch of rain per week to maintain growth. If rainfall is low, you may need to do additional watering once a week to ensure proper plant growth. Humidity also plays a role in keeping the plants properly watered. Plant can grow in normal room humidity, but it prefers higher humidity if possible - generally around 40 to 60 percent. More humidity means the soil will stay wetter for longer. With indoor plants, you can increase the humidity by placing a small humidifier next to the plant. For outdoor plants, you can mist the plant throughout the day.

There are plenty of viable ways to supply your Furry Feather Calathea with water. If you grow your plant in an indoor pot, for the Furry Feather Calathea in small pots, you can bring your potted plant to your kitchen sink. Then, use the faucet to add water to the container. By holding the pot in your hands, you should easily notice when the water begins to run through the pot’s drainage holes, at which point you can stop watering. The cold temperature will hurt the plants' root system, so please don't do this during winter or in cold climates. Most of the time, watering via your faucet is permissible for the Furry Feather Calathea. However, if the local tap water contains a high proportion of fluorine, chlorine or salts, you should consider using rainwater or lake water. Also, since the Furry Feather Calathea can respond well to overhead watering and watering directly into the soil, you can use a watering can, hose, or just about any tool you’d like to water it. For Furry Feather Calatheaed in the ground, when there is not enough rain, aim the hose at the root system and open the spout for more than 10 minutes to fully water. Tips: The Furry Feather Calathea is quite sensitive to the water you use. They are used to soft, acidic water found naturally. If you live in an area with hard water you can use an at-home water filter to remove any minerals and salts. To get rid of chemicals, you can let your tap water sit out for around 24 hours so that they dissipate. You can also purchase filtered water for your plants. Furry Feather Calathea likes water with 6.5 pH the best. Rainwater is a better choice than tap water, so you can store some rainwater when it's raining for your Furry Feather Calathea.

Furry Feather Calathea needs the humid conditions tend to keep the plants moist. They do not dry out completely between waterings. However, if soggy is retained, it will tend to make its root system rotten. So people will always water after the top 1.5-2 inches or so of soil has dried out. The depth of testing is often related to the depth of the soil. When the soil depth is around 5 inches, it is recommended to test about 1.5 inches or so (about one-third of the soil depth), and more for larger pots. If you have a Soil Moisture Meter, then watering becomes easy by inserting the same position and when the soil meter is found to be around 3, then watering can be done. If it is still greater than 3 then you will need to wait a little longer until it dries out. Keeping it this way will allow you to avoid overwatering your plants.

Pruning your Furry Feather Calathea is a fairly simple process. First, you will need a reliable set of hand pruners or hedge trimmers. You may use a clean pair of sharp scissors if you don’t have pruners or garden shears on hand. It’s important to always clean your gardening tools before and after using them to prevent the possibility of spreading disease or infection to other plants. To prune your Furry Feather Calathea simply allow your plant to go dormant over the Winter. Some time between late winter and early spring – or when new growth starts to appear – take your clean pruners or trimmers and cut away any dying, damaged, yellow or declining foliage. Repeat this process until you reach the base of the plant or until there are no dead pieces left to cut. When pruning, be careful not to damage the new growth that may be emerging near the base of your plant. These parts cannot be restored and pruning can increase the ventilation of the plants and facilitate their growth. Any pruning that is done to this plant should be cut straight across the blades or stems. No angled cuts are required. Diseased leaf blade foliage can be removed as it appears. This could be done anytime when your Furry Feather Calathea is growing.

Once you’ve pruned your plant, you should dispose of the stems and leaves either by composting the healthy ones or throwing out the diseased parts. You can also fertilize just before or after pruning, which gives Furry Feather Calathea a little vitamin boost that can provide it the nutrients needed to better protect itself from any nearby pathogens or diseases. Do not water the Furry Feather Calathea immediately after pruning as this can lead to fungal infestation of the plants through the wounds. You don’t need much after care when you’re done pruning. It might benefit from light watering and some liquid plant food to encourage new growth.

Early spring and late winter are the best times to prune your Furry Feather Calathea on a large scale. If you want to control the size of your Furry Feather Calathea, you can prune them as you wish, but be careful not to prune more than a third of the size of the plant. Yellow and diseased leaves may appear during the summer months when the Furry Feather Calathea is growing vigorously and these types of leaves need to be pruned back immediately. These parts of the Furry Feather Calathea cannot be restored and pruning increases the ventilation of the plant and facilitates its growth.

Strategic pruning is usually done at different times of the year or during certain stages of growth depending on the plant. However, knowing when to prune your Furry Feather Calathea depends on where you live and how established your plant is. For example, if your Furry Feather Calathea is a new resident, it’s a good idea to wait until the plant starts to grow back before you start pruning. On the other hand, if your plant is already established, you will want to prune the dry or dead parts in plant before new leafy growth appears in early spring or late winter. This is the time of year when plants are dormant and pruning causes the least damage to them. This is also the best time of year to do more extensive pruning. It’s important to note that if Furry Feather Calathea is pruned too late in the season, it can leave new growth at risk for damage or disease. However, if your Furry Feather Calathea is indoors this is not a problem and you can prune at any time. Since this can affect the long-term health and appearance of your plant, it’s important to keep this in mind when deciding when and how to prune. As your Furry Feather Calathea grows larger over time, you can trim it as needed after annual pruning. Dead, damaged, or diseased leaf blade foliage can be removed as it appears. This could be done anytime when your Furry Feather Calathea is growing.

Furry Feather Calathea typically needs full, indirect sunlight in order to thrive indoors. This means that the plant should be exposed to bright sunlight that doesn’t hit it directly from a window or another light source, like a grow light. You can easily protect it from direct sunlight by placing a sheer curtain between your Furry Feather Calathea and the window, or by placing it behind a part of the window with a dark screen.

If this is your first time bringing your Furry Feather Calathea home, then it might be a good idea to try to ease it into the sunlight it needs, rather than place it in bright, indirect light right away. Over the course of two weeks or so, you can slowly move your plant into the sunlight to avoid shock or burning of the leaves from sudden intense light exposure. By easing it into the light, your Furry Feather Calathea is much more likely to adapt to your home environment well.

Furry Feather Calathea is one that can easily sunburn with too much sunlight. In the wild, these plants only receive mild, dappled light, filtered down from tree canopies. While they need more light than that to grow in our homes, too much can certainly cause issues. If your Furry Feather Calathea is getting too much light, you’ll notice that the foliage begins to look bleached or washed out, the tips of leaves may turn yellow or brown and crispy, and it may even grow too quickly to support itself.

Sunburn for plants is much less severe than sunburn for people. While it may look unsightly, crispy, burnt leaves can be removed if they’re too far damaged to recover, or over half of the leaf is damaged. However, you can also try trimming back the leaves just to remove any sunburn damage in an effort to save them, if there’s not too much discoloration. Move your Furry Feather Calathea away from its light source to avoid future light damage.

While some plants may be ready to face the sweltering sun straight out of the ground, Furry Feather Calathea needs some time to build itself up enough to tolerate bright light. Propagated cuttings should receive only moderate indirect light, while new leaves during the growing season should be shielded a bit as well. The tender new leaves are more prone to sunburn than any other part of the plant.

Fortunately, plants can communicate in their own language to convey whether they have adequate sunlight or not. Like most plants, your Furry Feather Calathea will tell you if it isn’t getting enough sunlight. The most visible sign is when your plant becomes particularly dark, or there is no new growth on the plant from one season to the next. You’ll also notice that leaves that do grow in may remain smaller than others, since there isn’t enough light to photosynthesize to support large new leaves.

Depending on how bright the sunlight is that your Furry Feather Calathea gets, the number of hours in a day may vary. If you have your plant in bright, indirect light, then there’s no need to try to restrict or increase the amount of time your plant gets this light each day. However, if light is less bright or further away from your Furry Feather Calathea, then you can try to aim for at least eight hours of full light per day.

For this tropical plant to thrive, you’ll want to keep them between 75℉ and 90℉ (25-32℃). Each species can handle temperatures outside of this range, but keeping it within several degrees of these limits will ensure they grow to their maximum potential. As for its extreme temperature limits, any environment below 50℉ (10℃) or above 95℉ (35℃) will begin to hinder its growth and cause various aberrations to its leaves and stems. This is especially true with low temperatures; even a light frost can cause your tropical plants to perish. Cellular death can begin to happen at a rapid pace, with some species dying in as little as 12 to 24 hours.

While Furry Feather Calathea doesn’t require any changes in temperature to enter different growing phases, it is important to stay consistent. Wild temperature fluctuations can slow down its growth regardless of its current phase, so it's always better to keep them in a controlled environment. That optimal temperature range of 75℉ and 90℉ (25-32℃) is vital to maintain, especially staying above the lower limit. Going above 90℉(32℃) isn’t ideal, but as tropical plant it won’t suffer too much. On the other hand, going below 50℉ (10℃) (and especially 40℉/5℃) will begin to directly damage this heat-loving plant species.

Furry Feather Calathea does not need different temperatures for different growing seasons. The most important step in seasonal care is to keep the environment within the optimal temperature range. That's why it's always best to keep this plant indoors. That way, you can control the temperature no matter what the climate is like outside. Light is also important for tropical species, with all of these plants preferring a partial side level of sun exposure. This means any light they receive needs to be dappled or filtered, with bright but indirect light being the best option when growing your plants indoors. Too much direct sunlight can negatively affect your plant’s leaves, reducing its growth potential.

Tip #1: Don’t Leave Your Plant Near Windows in Colder Months If you want to make sure your plant isn’t exposed to colder temperatures, you may want to keep them away from windows. In colder months like late fall and winter, even the smallest draft can leak cold air into your home through cracks in your windows. While this air usually dissipates and warms up as it travels throughout your home, any plants placed in close proximity to the window will be affected. Move your tropical plants into an area where they will still get bright but indirect light, while making sure they won’t be affected by potential drafts. Tip #2: If You Find Dry Patches, Your Plant May Be Getting Too Much Sunlight or Heat You may notice the leaves become white or even scorched on a sunny day. These discolorations and unusual markings usually indicate that a plant is getting too much heat or sunlight, and it may be dehydrated. Excess light and heat will dry out the soil, stopping plants from getting the moisture they need to support their cellular structure. It also slows down or stops the process of photosynthesis, further hindering growth. If ignored for too long, these dry spots can spread and eventually result in the death of your plants. Tip #3: Avoid Frost at All Costs Colder temperatures and frost can damage your plants by causing ice crystals or disrupt normal physiological activity. This makes it nearly impossible for water to move freely throughout plant tissue, creating a deficit of moisture in their stems and leaves. You can tell a plant has been damaged by frost if it begins to suffer from hydrosis (it will appear as though it's soaked with water.) If the problem persists, your plants may begin shriveling and turning a dark brown or black hue. After that, the plant will almost certainly die.

The best way to maintain the right temperature range for Furry Feather Calathea is by keeping an eye on both the climate and humidity. You’ll want to try to keep each species in a room where you have access to climate control, keeping the heat in the temperature range best mimics its natural habitat. The humidity levels will also have a direct effect on temperature, so it's important to monitor these as well. You can artificially raise the humidity of your growing space by using a humidifier or lightly misting the leaves with water. If you intend to grow this species outside, you may find it difficult to maintain the right balance of temperature and humidity. If temperatures begin to drop or the air becomes too dry, your best option is to find room within your home and move your plant inside. An indoor growing space will allow you to control the climate more closely, helping your plant reach its full potential.

All plants rely on soil nutrients to facilitate their growth, and the Furry Feather Calathea is no exception. However, it is not always a guarantee that the soil in which your plants grow will have all of the nutrients required. Fertilization and soil amendments help ensure that the plants in your garden not only have the basic nutrients they need but also that they get the nutrients that are specifically necessary to them. Furry Feather Calathea needs fertilizer to ensure that its roots and stems continue to develop in a healthy way throughout the growing season. Fertilization will also help a Furry Feather Calathea a set of leaves that looks fantastic, which is especially important for this plant since its foliage is its main point of ornamental appeal.

A Furry Feather Calathea will need the greatest amount of fertilizer during the seasons in which it is actively growing. This active growth phase typically spans most of the months that make up spring, summer, and early fall. Once winter ends, you should plan to feed your Furry Feather Calathea about once every two to four weeks. Continue feeding at this rate until the fall months arrive. Once fall arrives, you can reduce your fertilization rate, reducing the amount of fertilizer you give gradually until you cease feedings entirely in anticipation of winter, when the Furry Feather Calathea will have far less active growth.

Throughout most of the year, including spring, summer, and most of the fall, you should continue feeding your Furry Feather Calathea regularly. The only exception to this is if you notice that your Furry Feather Calathea has received too much fertilizer or if you have managed to fertilize your Furry Feather Calathea incorrectly, causing fertilizer burn or some other issue that you'll need to remedy before returning to a regular feeding schedule. The only time of year when you should not fertilize a Furry Feather Calathea is during winter. If you grow this plant indoors in an area where the winters are cold, it will enter a dormant phase during the winter. Feeding this plant during its dormant phase is not only unnecessary and unhelpful to this plant's growth, but it is also very likely to cause fertilizer burn.

The fertilizer for a Furry Feather Calathea has a specific blend of nutrients, each of which is present in relatively low amounts. An ideal fertilizer will have an N-P-K ratio of 3-1-2. However, a general-purpose fertilizer that has an even blend of nutrients can work well in some cases. Still, even when using a balanced fertilizer, the ratio number representing the volume of each nutrient should be at 10 or lower. The fertilizer you use can be either granular or liquid based. If you choose to use a liquid-based fertilizer, it is often best to dilute the strength by half. While there is not much downside to granular fertilizer, it is often most sensible to use liquid fertilizer, especially if you feed your Furry Feather Calathea while you supply water.

The fertilizer that you purchase for your Furry Feather Calathea will likely come with application instructions that you should follow in most cases. However, for a Furry Feather Calathea, you should always fertilize just before or while you are watering the soil, as this will prevent the fertilizer from burning the plant's roots. If you use a slow-release granular fertilizer, you should sprinkle it on the soil and then provide water immediately after. If you use a liquid-based fertilizer, you should dilute it with water, apply it to the soil, then supply a bit more water. Diluting your fertilizer by at least half is especially important in spring and fall when the plant's growth is ramping up and decelerating, respectively.

Since it is advisable to fertilize your Furry Feather Calathea every few weeks throughout the growing season, overfertilization is not often an issue. However, it remains possible for this to occur. If you overfertilize your Furry Feather Calathea, you may notice accumulations of excess fertilizer on the soil’s surface and foliage discoloration. Fertilizer burn is the most common issue you should worry about when feeding a Furry Feather Calathea. This issue occurs when you overfertilize, fail to dilute your fertilizer, or when don’t water during and after fertilization. In any of those cases, the fertilizer can draw moisture out of your plant’s roots, causing it to dry out. Often, fertilizer burn will manifest with browning and yellowing of this plant’s leaves.