About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
More Info
Related Plants
Related Articles
Add to My Garden Graptopetalum 'Mirinae'
Graptopetalum 'Mirinae'
The Graptopetalum 'Mirinae' is a small variety often confused with Graptpetalm mendoza. The main difference is that each Graptopetalum 'Mirinae' leaf is smaller and looks pink when the plant is at its best. There are also distinct red dots on its white petals.
Hardiness Zones
9 to 11
Care Guide for Graptopetalum 'Mirinae'
Average water needs,watering when the top 3 cm of soil has dried out.
Fertilization once in spring.
Deadhead (or remove) withered flowers after flowering.
Full sun
9 to 11
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Scan QR code to download
Graptopetalum 'Mirinae'
Sunlight
Full sun
Hardiness Zones
9 to 11
Download and print this plant care card and attach it to your plants
Download
Graptopetalum 'Mirinae'
Sunlight
Full sun
Hardiness Zones
9 to 11
Download
Graptopetalum 'Mirinae'
Sunlight
Full sun
Hardiness Zones
9 to 11
Download
Questions About Graptopetalum 'Mirinae'
Watering 
Sunlight 
Temperature 
Fertilizing What should I do if I water my Graptopetalum 'Mirinae' too much or too little?
Underwatered Graptopetalum 'Mirinae'
Graptopetalum 'Mirinae' and other succulents can endure long periods without water, so it’s unusual to find one of these suffering from underwatering. But, if you somehow forgot about your plant and neglected to water it for a month or more, you’ll probably find your Graptopetalum 'Mirinae' looking thirsty or with some damage from lack of watering.
It is very easy to identify an underwatered Graptopetalum 'Mirinae' . Plant look lacklustre and wrinkled. Some may have dried up completely, turned brown and crispy, or dropped off the plant. And of course, the soil will be completely dried out.
If your Graptopetalum 'Mirinae' is thirsty and underwatered, give it plenty of water as soon as possible. Submerging the pot entirely in water for about 5-10 minutes is a good way to make sure the soil and plant are rehydrated properly. When you feel a sense of moisture on the surface of the soil with your finger, it means the watering is done properly.
Overwatered Graptopetalum 'Mirinae'
Overwatering is dangerous to Graptopetalum 'Mirinae' and can be fatal to your plant if you don’t remedy the situation. Too much moisture over time leads to root rot, which prevents the roots from being able to absorb nutrients and water from the soil. Root rot occurs when wet conditions allow fungi and bacteria to flourish in the soil and feed on roots. When you find that it's overwatered, you'd better change the growing conditions, place it somewhere with more air ventilation and adjust water frequency, for example.
The symptoms of overwatering are yellow, swollen, and translucent organs that may even burst open from being over-full with water. If the problem continues without being treated, plant might turn brown or black, and fall off the plant at the slightest touch. Be sure to check the soil to determine if overwatering is the culprit, as some other issues can cause similar symptoms.
It’s a bit difficult (but not impossible) to save an overwatered plant. The key is catching it early before a lot of damage has occurred. If the roots become rotten, it is likely to kill the entire plant. If you suspect you have overwatered your Graptopetalum 'Mirinae' , the first step is to remove it from its pot and check the roots and soil.
After removing the plant from its pot, gently remove wet soil from around the roots and then rinse them clean in room-temperature water. This helps with removing fungus that might be lurking in the soil and allows you to get a better sense of how healthy the roots are. If your plant has already developed root rot, you will see roots that are dark brown or black, soft, mushy, or slimy.
If the majority of the roots are already affected by root rot, it may not be possible to save the plant. In this case, it is best to remove any healthy stem and try to use these to propagate a new Graptopetalum 'Mirinae' . If, on the other hand, only a portion of the roots have succumbed to rot and other healthy roots still remain, there is a chance it can be saved.
Use a sterilized cutting tool to remove any unhealthy-looking roots. Once you're left with only the firm, pale roots, it’s a good idea to dip them in a fungicide to kill off any remaining spores. After that you can repot your Graptopetalum 'Mirinae' in fresh, free-draining potting soil. While this does not always work to save a succulent with root rot, in most cases this plant will be able to make a full recovery and will put out new growth starting in the next growing season.
Read More ![more]()
How often should I water my Graptopetalum 'Mirinae' ?
There’s not a hard-and-fast rule for how often to water Graptopetalum 'Mirinae' . The best way to determine this is to check the soil and only water when it’s bone dry. You can either stick your finger in the pot or use a moisture meter to check the soil below the surface. When you plant it in a deep pot, you can do this with a stick or chopstick. If it feels even a little bit moist, wait a few days and check it again.
Most people will need to water Graptopetalum 'Mirinae' about every two weeks in summer and once a month in winter, but there are several factors that can change the frequency. The section below lists some considerations that can help you to determine how often to water.
Read More ![more]()
What should I consider when watering my Graptopetalum 'Mirinae' ?
There are several environmental conditions that will affect how your Graptopetalum 'Mirinae' needs to be watered, including the container size, soil type, temperature, and humidity.
First off, the container and soil you use will determine how often to water and how much water to use each time. Be sure you use a container with plenty of drainage holes in the bottom so extra water can escape the pot. A small container has less room for soil, meaning it won’t hold as much moisture, while a larger pot will stay wet longer and need to be watered less often. It’s important not to keep your Graptopetalum 'Mirinae' in an oversized pot as this can easily lead to overwatering. When repotting, move to just one size larger than the current container. A shallow container works better than a deep one, since Graptopetalum 'Mirinae' has shallow root systems.
Graptopetalum 'Mirinae' will need to be watered less often in winter and more often in the active growing season in spring and autumn. During the winter, growth slows down considerably and the plant isn’t using much energy or water. There is less water lost to evaporation in cooler winter air, meaning that soil stays wet for much longer than it would in the summer.
This also applies to the general climate around your home. If you live in a humid location with a lot of rain, you will need to water less often than if you live in a dry, arid climate. Remember that conditions at the same geographic location can vary significantly with the season and the use of indoor heating and air conditioning.
Outdoor Planting
If Graptopetalum 'Mirinae' is planted in the ground, after establishing a root system, it shouldn’t need supplemental water beyond what it receives through precipitation and dew. But if there is a long dry period, you may want to water occasionally. In other areas where Graptopetalum 'Mirinae' can only be grown in a container, this plant can be moved outside in the spring and summer when the temperature is proper and then brought back inside when temperatures start to drop. A potted Graptopetalum 'Mirinae' kept outside usually needs more water than the same plant kept indoors, because there is a lot more sun exposure even on a shaded porch.
Read More ![more]()
How to water Graptopetalum 'Mirinae' ?
The best way to water Graptopetalum 'Mirinae' is to soak it thoroughly and then allow it to dry out before it gets watered again. Since this plant is somewhat drought tolerant, you can let it get quite dry before watering again. It is always better to give this type of plant too little water over too much.
When you water, make sure the soil gets thoroughly soaked throughout the whole pot. Don’t pour the water in just one spot, but rather try to go around the whole rim of the planter to be sure that it has a chance to get wet on all sides of the plant. The correct amount of water will depend on the size of your container and how much water your soil absorbs. Give your Graptopetalum 'Mirinae' enough water that it drains out from the drainage holes and then (ideally) leave the drained water in the saucer for about 20-30 minutes to absorb into dry pockets of soil. After that, discard any excess water that’s still in the saucer to avoid the soil getting waterlogged.
Bottom-watering is also an excellent method for Graptopetalum 'Mirinae' , as you can be sure that the soil gets thoroughly moistened. This process involves placing the pot into a saucer of water and allowing the soil to absorb moisture through the drainage holes. You will know that the soil has absorbed enough water when the top layer is moist. This takes a bit more time than top-watering, but is almost foolproof in getting an even distribution of water throughout the pot.
The original habitat of Graptopetalum 'Mirinae' is relatively dry with little rain, but when it rains, the soil will be thoroughly moistened. So you can mimic this situation by bottom-watering your plant when the soil is totally dry. Deep soil bathing is better than frequent light watering for Graptopetalum 'Mirinae' .
Read More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
More Questions People Also Ask
More About How-Tos
Explore 5 of plant how-tos on Feng shui direction, Water, Lighting, Temperature, Transplant, etc.
Feng shui direction
South
The graptopetalum 'Mirinae' furthers Feng Shui by bringing forth a harmonious balance of yin and yang energies. It is compatible with the South facing direction, potentially due to its resilience in withstanding ample sunlight. However, remember each Feng Shui scenario is personal and the effects might vary.
Water
Every 3 weeks
Graptopetalum 'Mirinae' originates from arid environments, preferring infrequent and thorough watering. Allow the soil to dry completely between waterings to mimic its natural habitat and prevent overwatering. It is always better to give this type of plant too little water over too much.
Learn More 
Lighting
Full sun
Graptopetalum 'Mirinae' yearns for an environment generously kissed by the sun, helping it to flourish. However, it can pull through even under scanty light conditions. Originating from a sun-drenched habitat, its growth remains undeterred if exposed to intense rays. Over or underexposure to light might lead to suboptimal growth.
Temperature
15 to 35 ℃
Graptopetalum 'Mirinae' is native to areas where the temperature fluctuates between 68 to 100.4°F (20 to 38°C). It thrives in warmer conditions, hence, adjustments to maintain this range should be made during colder seasons.
Transplant
1 foot
Graptopetalum 'Mirinae' 's knack for transplantation is best harnessed during the 'late summer to early autumn' season. The reason being the pleasant balance of temperature and humidity, optimal for root establishment. For locations, choose spots with bright, indirect light. One tip, always provide good drainage to prevent rot.
Common Pests & Diseases
Common issues for Graptopetalum 'Mirinae' based on 10 million real cases
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Solutions: Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed. Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn. Introduce appropriate artificial lighting. Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Solutions: If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Leaf rot
This pathogen can cause the leaves to rot.
Solutions: Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden. In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label. In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Overview
All plants require light, and if they do not receive it in the quantities that they require this distorts their growth in a process known as etiolation. In essence, etiolated plants are diverting all of their energy to growing taller in a desperate attempt to reach a position where they can meet their light requirements. Many other growth factors are harmed by this, and so light-deprived plants can become weak and distorted until they are almost unrecognizable. Low light symptoms are most commonly seen in houseplants, but outdoor specimens can also be affected.
Symptom Analysis
Although symptoms will vary in different plants, the general symptoms of low light are easy to spot.
- Plant stems grow tall and lanky.
- There are less leaves, and both leaves and stems tend to be pale and insipid looking. This is due to a shortage of chlorophyll.
- All plant parts become weakened and may droop, as energy is diverted toward too-fast growth as the plant stretches itself toward any source of light.
Disease Cause
Plants need sunlight in varying amounts for photosynthesis – a process that produces energy for growth and fruit and flower production. Low light causes a plant to divert all energy to upward (apical) growth in order to find better light. Plant hormones called auxins are transported from the actively-growing tip of the plant downwards, to suppress lateral growth. A drop in cellular pH triggers expansins, nonenzymatic cell wall proteins, to loosen cell walls and allow them to elongate. This elongation results in the abnormal lengthening of stems, especially internodes, or plant "legginess" which is observed in etoliated plants.
Solutions
Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed.
- Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn.
- Introduce appropriate artificial lighting.
- Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Prevention
To avoid etiolation, provide an adequate amount of light from the beginning.
- Choose a location that matches each plant's ideal light needs. Many indoor plants do best in or near a south-facing window, which will provide the longest hours of sunlight. Flowering plants and those with colored leaves typically need more light than purely-green plants, as photosynthesis occurs in the green portions of leaves.
- Select plants with light needs that match a location's conditions. Some cultivars and varieties require less light than others.
- Use a grow light. Darker locations may require artificial illumination. A grow light may also become more necessary during winter, when sunlit hours are at their shortest.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Overview
Regardless of the type of plant or where it is grown, at some point, it will begin to aged yellow and dry. This is a natural, unavoidable process that happens when the plant has completed all of the steps in its life.
Annual plants go through this process at the end of a single growing season. Perennial plants live for multiple years, if not tens or hundreds of years, but will still ultimately exhibit these symptoms.
Symptom Analysis
When plants have progressed through their natural developmental stages and are nearing the end of their lifecycle, they begin showing signs of decline. Leaves will start to yellow and droop, and over time they turn papery brown and dry.
Once completely dry, the leaves begin to fall from the plant until the entire plant has dried out.
Disease Cause
At the end of its life, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence or natural aging and death. Cell division stops, and the plant begins catabolizing resources to use in other parts of the plant.
As this happens, the tissues begin yellow and drying until the entire plant is desiccated and perishes.
Solutions
If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Prevention
Unfortunately, there is no way to prevent plants from dying of “old age.” To help prolong their life, and put off symptoms of aged yellow and dry for as long as possible, take care of them by giving them enough water, fertilizing them appropriately, and making sure they get enough sunlight.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Leaf rot
This pathogen can cause the leaves to rot.
Overview
Leaf rot is very common among both house plants and garden plants. It affects foliage and occurs mainly when the leaves become wet due to rain or misting by the gardener. The cause is fungal disease and this is facilitated by the fungal spores adhering to wet leaves then penetrating the leaf and expanding rapidly. Damp conditions and poor air circulation will increase chances of infection taking place. Another factor are leaves that are damaged or have been penetrated by sap sucking insects that facilitate plant penetration.
Symptom Analysis
- Spores are able to cling to a damp leaf and penetrate, often through an existing wound.
- A small dark brown mark appears which expands rapidly as sporulation starts to take place.
- Quite quickly these bull's eye like circles can link together and the whole leaf turns dark and loses texture.
- Leaf drop occurs.
Disease Cause
These symptoms are caused by a bacterial infection invading the plant. Bacteria from many sources in the environment (air, water, soil, diseased plants) enter a plant through wounds, or in some cases the stomata when they are open. Once inside the leaf tissue, the bacteria feed and reproduce quickly, breaking down healthy leaves.
Bacterial infections threaten most plant species, and are more prominent in wet weather that more easily transfers the bacteria from plant to plant, or from soil to plant.
Solutions
Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden.
In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label.
In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Prevention
- Clean up garden debris at the end of the season, especially if it contains any diseased plant tissue. Diseases can overwinter from season to season and infect new plants.
- Avoid overhead watering to prevent transferring pathogens from one plant to another, and to keep foliage dry.
- Mulch around the base of plants to prevent soil-borne bacteria from splashing up onto uninfected plants.
- Sterilize cutting tools using a 10% bleach solution when gardening and moving from one plant to another.
- Do not work in your garden when it is wet.
- Rotate crops to prevent the buildup of bacteria in one site due to continuous cropping.
- Use a copper or streptomycin-containing bactericide in early spring to prevent infection. Read label directions carefully as they are not suitable for all plants.
- Ensure plants are well spaced and thin leaves on densely leaved plants so that air circulation is maximised.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
More Info
Flower Color
White
Green
Scientific Classification
Phylum
Vascular plants Class
Dicotyledons Family
Stonecrop Genus
Leatherpetal Species
Graptopetalum 'Mirinae' 
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Related Plants
Calabash tree
In some areas, the dried fruit of the tropical calabash tree is used to make coffee cups and musical instruments such as maracas. Artisans paint the gourd-like fruit to sell to tourists and fisherman use them to carry fish.
Bloom Time
Spring, Summer
Cabbage tree
Cabbage tree is a large tree found throughout much of sub-Saharan Africa. It grows as much as 15 m tall, blooms with showy yellow flowers, and is a favorite food of African elephants.
Bloom Time
Spring, Summer
Cabbage tree
Cabbage tree’s flowers attract pollinating insects while the seeds are a food source for local bat colonies. Found growing primarily along streams and other waterways, the tree is easily identifiable by its bark which smells like cabbage. It is also why it is referred to as the 'cabbage tree.'
Bloom Time
Summer
Bunny succulent
After awakening from dormancy into its growth period, the leaves of the bunny succulent begin to grow, and look like a very cute pair of slowly elongating bunny ears. Planted in large pots, it can easily become caespitose, but it may look a bit cluttered during the growing period and appear less ornamental.
Bloom Time
Summer
Garden Usage
Succulent plants are so popular with people for its low maintenance cost and different but interesting shape. They can be planted in window sills as a potted plant or placed on an office table as a house plant to decorate the environment. They can also be planted in drainable and ventilated corners of courtyard as undershrub to form a unique tropical landscape. They don't need much care, therefore being a perfect choice for busy people.
Bottle gentian
Bottle gentian or Gentiana andrewsii, gets its common name from the shape of its blooms. These late-season flowers are shaped like bottles. They are mostly pollinated by bumblebees, the only insect with enough strength to pry open their buds.
Bloom Time
Summer, Autumn
Bottle gentian
Bottle gentian has small blue flowers that never fully open, but instead remain sealed like bottles. Only certain insects, such as bumblebees, are strong enough to open the petals. *Gentiana clausa* gets its scientific name from King Gentius, a Greek ruler from the 2nd century BCE.
Bloom Time
Summer, Autumn
View More Plants
Related Articles
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow Orange daylily See More The Orange daylily is a perennial plant known for its captivating lily-like blooms. Its natural habitats are meadows and forests, but it is also a common garden plant in temperate regions around the world. Each individual flower lasts only a day, but the plantContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow China rose See More The China rose (Rosa chinensis) is a Southwest China native. The plant has been cultivated for so long that it has become hard to tell the difference between wild and cultivated varieties. With medium-sized clusters of flowers and a long blooming season, it isContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Most Common Succulent
Plant Collection Most Common Succulent Aloe vera See More Aloe vera is an evergreen succulent species native to the Arabian Peninsula. The thick leaves are filled with gooey flesh that stores water for survival in its native desert territories. Aloe vera has become a popular houseplant and is also incorporated into a wide range ofContinue reading “Most Common Succulent”
Read More ![more]()
View More Articles
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
More Info
Related Plants
Related Articles
Add to My Garden Graptopetalum 'Mirinae'
Graptopetalum 'Mirinae'
The Graptopetalum 'Mirinae' is a small variety often confused with Graptpetalm mendoza. The main difference is that each Graptopetalum 'Mirinae' leaf is smaller and looks pink when the plant is at its best. There are also distinct red dots on its white petals.
Hardiness Zones
9 to 11
Care Guide for Graptopetalum 'Mirinae'
Water
Average water needs,watering when the top 3 cm of soil has dried out.
Fertilization
Fertilization once in spring.
Pruning
Deadhead (or remove) withered flowers after flowering.
Sunlight
Full sun
Hardiness Zones
9 to 11
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
Download
Questions About Graptopetalum 'Mirinae'
Watering Sunlight Temperature Fertilizing What should I do if I water my Graptopetalum 'Mirinae' too much or too little?
How often should I water my Graptopetalum 'Mirinae' ?
What should I consider when watering my Graptopetalum 'Mirinae' ?
How to water Graptopetalum 'Mirinae' ?
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
Download the App
More Questions People Also Ask
More About How-Tos
Common Pests & Diseases
Common issues for Graptopetalum 'Mirinae' based on 10 million real cases
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Solutions: Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed. Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn. Introduce appropriate artificial lighting. Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Learn More ![more]()
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More ![more]()
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Solutions: If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Learn More ![more]()
Leaf rot
This pathogen can cause the leaves to rot.
Solutions: Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden. In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label. In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Learn More ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App
Low light
A lack of sunlight will cause the stems and leaves to elongate and appear lighter in color.
Overview
All plants require light, and if they do not receive it in the quantities that they require this distorts their growth in a process known as etiolation. In essence, etiolated plants are diverting all of their energy to growing taller in a desperate attempt to reach a position where they can meet their light requirements. Many other growth factors are harmed by this, and so light-deprived plants can become weak and distorted until they are almost unrecognizable. Low light symptoms are most commonly seen in houseplants, but outdoor specimens can also be affected.
Symptom Analysis
Although symptoms will vary in different plants, the general symptoms of low light are easy to spot.
- Plant stems grow tall and lanky.
- There are less leaves, and both leaves and stems tend to be pale and insipid looking. This is due to a shortage of chlorophyll.
- All plant parts become weakened and may droop, as energy is diverted toward too-fast growth as the plant stretches itself toward any source of light.
Disease Cause
Plants need sunlight in varying amounts for photosynthesis – a process that produces energy for growth and fruit and flower production. Low light causes a plant to divert all energy to upward (apical) growth in order to find better light. Plant hormones called auxins are transported from the actively-growing tip of the plant downwards, to suppress lateral growth. A drop in cellular pH triggers expansins, nonenzymatic cell wall proteins, to loosen cell walls and allow them to elongate. This elongation results in the abnormal lengthening of stems, especially internodes, or plant "legginess" which is observed in etoliated plants.
Solutions
Low light can only be addressed by increasing light availability, and these measures will only stop further etoliation; current distortion cannot be reversed.
- Move plant to a position where it receives more light. Check the requirements for specific species, as too much sunlight can cause a plant to burn.
- Introduce appropriate artificial lighting.
- Some people choose to prune the longest stems so the plant can concentrate on healthy new growth under the improved lighting.
Prevention
To avoid etiolation, provide an adequate amount of light from the beginning.
- Choose a location that matches each plant's ideal light needs. Many indoor plants do best in or near a south-facing window, which will provide the longest hours of sunlight. Flowering plants and those with colored leaves typically need more light than purely-green plants, as photosynthesis occurs in the green portions of leaves.
- Select plants with light needs that match a location's conditions. Some cultivars and varieties require less light than others.
- Use a grow light. Darker locations may require artificial illumination. A grow light may also become more necessary during winter, when sunlit hours are at their shortest.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Overview
Regardless of the type of plant or where it is grown, at some point, it will begin to aged yellow and dry. This is a natural, unavoidable process that happens when the plant has completed all of the steps in its life.
Annual plants go through this process at the end of a single growing season. Perennial plants live for multiple years, if not tens or hundreds of years, but will still ultimately exhibit these symptoms.
Symptom Analysis
When plants have progressed through their natural developmental stages and are nearing the end of their lifecycle, they begin showing signs of decline. Leaves will start to yellow and droop, and over time they turn papery brown and dry.
Once completely dry, the leaves begin to fall from the plant until the entire plant has dried out.
Disease Cause
At the end of its life, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence or natural aging and death. Cell division stops, and the plant begins catabolizing resources to use in other parts of the plant.
As this happens, the tissues begin yellow and drying until the entire plant is desiccated and perishes.
Solutions
If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Prevention
Unfortunately, there is no way to prevent plants from dying of “old age.” To help prolong their life, and put off symptoms of aged yellow and dry for as long as possible, take care of them by giving them enough water, fertilizing them appropriately, and making sure they get enough sunlight.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Leaf rot
This pathogen can cause the leaves to rot.
Overview
Leaf rot is very common among both house plants and garden plants. It affects foliage and occurs mainly when the leaves become wet due to rain or misting by the gardener. The cause is fungal disease and this is facilitated by the fungal spores adhering to wet leaves then penetrating the leaf and expanding rapidly. Damp conditions and poor air circulation will increase chances of infection taking place. Another factor are leaves that are damaged or have been penetrated by sap sucking insects that facilitate plant penetration.
Symptom Analysis
- Spores are able to cling to a damp leaf and penetrate, often through an existing wound.
- A small dark brown mark appears which expands rapidly as sporulation starts to take place.
- Quite quickly these bull's eye like circles can link together and the whole leaf turns dark and loses texture.
- Leaf drop occurs.
Disease Cause
These symptoms are caused by a bacterial infection invading the plant. Bacteria from many sources in the environment (air, water, soil, diseased plants) enter a plant through wounds, or in some cases the stomata when they are open. Once inside the leaf tissue, the bacteria feed and reproduce quickly, breaking down healthy leaves.
Bacterial infections threaten most plant species, and are more prominent in wet weather that more easily transfers the bacteria from plant to plant, or from soil to plant.
Solutions
Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden.
In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label.
In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Prevention
- Clean up garden debris at the end of the season, especially if it contains any diseased plant tissue. Diseases can overwinter from season to season and infect new plants.
- Avoid overhead watering to prevent transferring pathogens from one plant to another, and to keep foliage dry.
- Mulch around the base of plants to prevent soil-borne bacteria from splashing up onto uninfected plants.
- Sterilize cutting tools using a 10% bleach solution when gardening and moving from one plant to another.
- Do not work in your garden when it is wet.
- Rotate crops to prevent the buildup of bacteria in one site due to continuous cropping.
- Use a copper or streptomycin-containing bactericide in early spring to prevent infection. Read label directions carefully as they are not suitable for all plants.
- Ensure plants are well spaced and thin leaves on densely leaved plants so that air circulation is maximised.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
More Info
Flower Color
White
Green
Scientific Classification
Phylum
Vascular plants Class
Dicotyledons Family
Stonecrop Genus
Leatherpetal Species
Graptopetalum 'Mirinae' 
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Download the App
Related Plants
Related Articles
Best Perennial Plant to Grow
# Useful Tips
Best Perennial Plant to Grow
# Useful Tips
Most Common Succulent
# Useful Tips
Discover more articles?
Read More 
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Sign in/sign up
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Water
Indoor
Indoor
Outdoor potted
In the ground
Choose a site here for personalized care tips. Essentials
Graptopetalum 'Mirinae' originates from arid environments, preferring infrequent and thorough watering. Allow the soil to dry completely between waterings to mimic its natural habitat and prevent overwatering. It is always better to give this type of plant too little water over too much.
Watering check today
More
Spring
Summer
Autumn
Winter
Morning
Noonday
Evening
Morning watering can reduce the risk of fungal growth. Requirements
Every 3 weeks
Watering Frequency
Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App
Just like people, each plant has its own preferences and needs. Devote time to understanding your plants so you can nurture them properly. Observe your plants attentively, learning from their growth patterns, and becoming more in tune with their needs as you grow together. Keep a watchful eye on new plants and seedlings, as they are sensitive to both overwatering and underwatering. Shower them with gentle love and attention, fostering their growth and strength. Let the rhythm of your local climate guide your watering habits, adapting your schedule to the changing weather and the needs of your plants. Amount and Approach
Watering from the soil
1. Gradually pour water to the soil from above.
2. Stop watering your plant once water begins to flow out of the drainage holes in the pot.
3. Allow it to rest for 1 minute, then discard any water remaining in the tray, making sure your plant is not sitting in the water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Watering from the bottom
1. Fill the tray with water, ensure that the soil makes contact with the water.
2. Let it rest for 10 minutes.
3. Drain excess water from the tray if the soil is uniformly damp.
4. Watering more to the tray if the soil remains dry.
5. Allow it to sit for an additional 20 minutes before draining any excess water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Soaking the water
1. Select a location for soaking your plants, such as a tray or bathtub.
2. Pour a few centimeters of fresh water into the bottom of your chosen container.
3. Soaking your plant pots within the water, allowing them to absorb moisture for 1 hour.
4. Remove the plants from the water and let them dry.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. For Graptopetalum 'Mirinae' , outdoor watering can be done using the method of sprinkling. It is a simple and direct approach. It involves pouring water onto the soil around the plant, allowing the water to naturally seep into the root zone. Typically, containers such as watering cans, buckets, or watering jugs are used for sprinkling. Depending on the size of the plant, usually, 1-2 gallons of water are required to ensure the soil around the roots is thoroughly moistened.
Important Symptoms
Overwatering
Overwatering can easily lead to disease symptoms in Graptopetalum 'Mirinae' , as it has evolved mechanisms to survive drought conditions. For instance, the plant stores water in its tissues, closes its stomata, and reduces water loss. Symptoms of overwatering include yellowing leaves, brown or black spots, leaf rot...
View more
(Symptom details and solutions)
Brown or black spots
Excessive watering can damage the plant's root system, making it vulnerable to fungal infections. The plant may develop dark brown to black spots that spread upwards from the lower leaves which are usually the first to be affected.
Leaf rot
Overwatering can cause the leaves to become waterlogged, leading to rotting when the environment is humid.
Soft or mushy stems
Excess water can cause stems to become soft and mushy, as the cells become waterlogged and lose their structural integrity.
Root rot
Excess water in the soil can lead to the growth of harmful fungi and bacteria, causing the roots to rot and eventually kill the plant.
Increased susceptibility diseases
Overwatering plants may become more susceptible and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Adjust watering frequency based on seasons and soil dryness. Wait for soil to dry before watering.2. Increase soil aeration by loosening surface and gently stirring with a wooden stick or chopstick.3. Optimize environment with good ventilation and warmth to enhance water evaporation and prevent overwatering.
Underwatering
For Graptopetalum 'Mirinae' , it is not prone to experiencing plant health issues due to lack of watering. However, it is possible to suffer from dehydration if watering is consistently forgotten for an extended period. Symptoms of dehydration include wilting, yellowing leaves, root damage...
View more
(Symptom details and solutions)
Wilting
Due to the dry soil and insufficient water absorption by the roots, the leaves of the plant will appear limp, droopy, and lose vitality.
Yellowing leaves
The leaves may begin to yellow or develop dry tips as a result of water stress and reduced nutrient uptake.
Root damage
Prolonged underwatering can cause root damage, making it difficult for the plant to absorb water even when it is available.
Loss of turgor pressure
When plants are underwatered, their cells lose water, causing a loss of turgor pressure. This can result in the plant appearing limp or deflated.
Slow growth
The plant may exhibit delayed development or slow growth due to not receiving enough water to support its growth.
Solutions
1. Thoroughly saturate soil with slow ring watering to ensure uniform and sufficient moisture for plants. 2. Increase air humidity with water trays or misting to slow leaf water evaporation. 3. Watering according to the recommended frequency.Adjust watering frequency based on seasons and soil dryness.
Discover information about plant diseases, toxicity, weed control and more.
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Full sun
Ideal
Above 6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
Graptopetalum 'Mirinae' yearns for an environment generously kissed by the sun, helping it to flourish. However, it can pull through even under scanty light conditions. Originating from a sun-drenched habitat, its growth remains undeterred if exposed to intense rays. Over or underexposure to light might lead to suboptimal growth.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Graptopetalum 'Mirinae' is a beloved choice for indoor gardening, and they require strong light to thrive. However, when placed in rooms with suboptimal lighting, they may develop symptoms of light deficiency.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your Graptopetalum 'Mirinae' may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
Graptopetalum 'Mirinae' enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Graptopetalum 'Mirinae' require strong light to thrive, and some are remarkably resilient to sun exposure, rarely suffering from sunburn.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover information about plant diseases, toxicity, weed control and more.
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
Graptopetalum 'Mirinae' is native to areas where the temperature fluctuates between 68 to 100.4°F (20 to 38°C). It thrives in warmer conditions, hence, adjustments to maintain this range should be made during colder seasons.
Regional wintering strategies
Graptopetalum 'Mirinae' is a heat-loving plant that gradually stops growing and enters a dormant state during the winter. When the outdoor temperature drops below {Tolerable_growing_temperature_min}, it should be moved indoors for cultivation. Choose a location near a south-facing window to provide as much sunlight as possible. If there is insufficient natural light, supplemental lighting can be used. When the temperature falls below {Suitable_growth_temperature_min}, the plant's growth slows down, and watering should be reduced or stopped to prevent root rot. For Graptopetalum 'Mirinae' grown outdoors, watering should be completely halted during low temperatures. If feasible, you can set up a temporary greenhouse for insulation or use materials such as plastic film or fabric to wrap the plant during cold temperatures.
Important Symptoms
Low Temperature
Graptopetalum 'Mirinae' thrives in high temperatures and is not tolerant of low temperatures. It grows best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, the plant may become weak, wilt, and be prone to root rot. In cases of mild frost damage, there may not be any initial symptoms, but after a week, the plant will gradually wither.
Solutions
Trim off the frostbitten areas, paying attention to whether the roots have rotted. If the roots have rotted, they need to be cut off, and the plant can be propagated through cuttings. Immediately move indoors to a warm environment and place the plant near a south-facing window to ensure ample sunlight. If there is insufficient light, you can use supplemental lighting.
High Temperature
During summer, Graptopetalum 'Mirinae' should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the plant's growth will cease, it will experience water loss, wilting, and becomes more susceptible to sunburn.
Solutions
Remove the sunburned and rotten parts. Shield the plant from afternoon sunlight until it recovers and starts growing again. For plants with root rot, stop watering until new roots begin to emerge.
Discover information about plant diseases, toxicity, weed control and more.
Transplant
How to Successfully Transplant Graptopetalum 'Mirinae' ?
Graptopetalum 'Mirinae' 's knack for transplantation is best harnessed during the 'late summer to early autumn' season. The reason being the pleasant balance of temperature and humidity, optimal for root establishment. For locations, choose spots with bright, indirect light. One tip, always provide good drainage to prevent rot.
What Preparations are Needed Before Transplanting Graptopetalum 'Mirinae' ?
What is the Ideal Time for Transplanting Graptopetalum 'Mirinae' ?
The perfect period to transplant graptopetalum 'Mirinae' would be in the late summer to early autumn, as its roots can establish well in the cool, stable soils. Relocating the graptopetalum 'Mirinae' at this epoch not only bolsters its resistance to diseases, but it also gives it a head start when spring arrives. It's a stepping stone to healthier, sturdier growth that will indeed reward you with beautiful displays in the coming year.
How Much Space Should You Leave Between Graptopetalum 'Mirinae' Plants?
To give your graptopetalum 'Mirinae' enough room to grow, you should space each plant at least 1 foot (30.5 cm) apart. This helps to promote healthy growth by ensuring each plant has enough light and air circulation.
What is the Best Soil Mix for Graptopetalum 'Mirinae' Transplanting?
Your graptopetalum 'Mirinae' will thrive in well-draining soil. Most garden or potting soils will work, just ensure they don't retain too much water. Additionally, adding a slow-release granular fertilizer to the base of each hole can provide essential nutrients.
Where Should You Relocate Your Graptopetalum 'Mirinae' ?
Locate your graptopetalum 'Mirinae' where it can get a good amount of morning sunlight but is shielded from harsh afternoon sun. A location with partial sun and partial shade is best. Remember, too much sunlight can damage the plant.
What Equipments Should You Prepare Before Transplantation Graptopetalum 'Mirinae' ?
Gardening Gloves
Essential for protecting your hands from the soil and sharp objects while working with the plant.
Trowel
This small hand tool is just right for digging small holes and removing graptopetalum 'Mirinae' from its current location.
Watering Can
To gently water the plant when needed, ensuring roots are moist for the best transplanting results.
Garden Spade
Ideal for digging wholes in the ground for graptopetalum 'Mirinae' 's new home.
Mulch
An organic solution to conserve moisture in the soil around graptopetalum 'Mirinae' post-transplant.
Pruners
To neatly clip any necessary parts of the plant without causing stress during the transplant process.
How Do You Remove Graptopetalum 'Mirinae' from the Soil?
Begin with preparing graptopetalum 'Mirinae' 's new home by digging a hole with your spade, twice as wide and equal in depth to the plant's root ball.
Place graptopetalum 'Mirinae' in the hole ensuring it is not sitting too deep or too high. The top of the root ball should be level with the surrounding soil.
Gently backfill the hole with the original soil or compost mix, firming it lightly around the base of graptopetalum 'Mirinae' .
After transplanting, water graptopetalum 'Mirinae' generously. Avoid watering the leaves. Instead, aim at the base of graptopetalum 'Mirinae' .
Lastly, apply a 2 to 3-inch layer of mulch around graptopetalum 'Mirinae' , but not touching the stem itself to prevent rot.
Step-by-Step Guide for Transplanting Graptopetalum 'Mirinae'
Step1 Preparation
Begin with preparing graptopetalum 'Mirinae' 's new home by digging a hole with your spade, twice as wide and equal in depth to the plant's root ball.
Step2 Placement
Place graptopetalum 'Mirinae' in the hole ensuring it is not sitting too deep or too high. The top of the root ball should be level with the surrounding soil.
Step3 Backfilling
Gently backfill the hole with the original soil or compost mix, firming it lightly around the base of graptopetalum 'Mirinae' .
Step4 Watering
After transplanting, water graptopetalum 'Mirinae' generously. Avoid watering the leaves. Instead, aim at the base of graptopetalum 'Mirinae' .
Step5 Mulching
Lastly, apply a 2 to 3-inch layer of mulch around graptopetalum 'Mirinae' , but not touching the stem itself to prevent rot.
How Do You Care For Graptopetalum 'Mirinae' After Transplanting?
Root establishment
For the first few weeks post-transplant, graptopetalum 'Mirinae' will be establishing its roots in its new location. During this period, ensure that the soil around is moist but not waterlogged.
Pruning
Trim off damaged or overgrown branches to enable the plant to focus energy on new growth. Be careful not to prune too much as it could cause stress to graptopetalum 'Mirinae' .
Avoid Fertilizing
Do not fertilize graptopetalum 'Mirinae' immediately after transplanting. Wait for a few weeks to allow the plant to get used to its new location.
Monitor Health
Keep an eye on graptopetalum 'Mirinae' for any signs of transplant shock:wilting, yellowing of leaves, or stunted growth.
Troubleshooting Common Issues with Graptopetalum 'Mirinae' Transplantation.
When should I transplant my graptopetalum 'Mirinae' plant?
The ideal time to relocate your graptopetalum 'Mirinae' is during the late summer to early fall (S3-S4). These seasons provide the best conditions for your plant to thrive.
What's the optimal distance between graptopetalum 'Mirinae' plants when I transplant them?
Keep a minimum spacing of approximately 1 foot (or roughly 30 cm) between graptopetalum 'Mirinae' plants. This ensures each plant has enough room to grow comfortably and get sufficient light.
How do I prepare the new location for graptopetalum 'Mirinae' plant?
Prepare a hole twice as wide as the root ball, and deep enough to cover the roots. Filling it with a mixture of compost and native soil will give graptopetalum 'Mirinae' a great start.
What is the correct way to remove graptopetalum 'Mirinae' from the current pot before transplanting?
Water graptopetalum 'Mirinae' thoroughly a day before transplanting. This helps the root ball stay together. Gently loosen the edges of the pot, tip it over and carefully ease out the plant.
Do I need to trim the roots of my graptopetalum 'Mirinae' before transplanting?
While it's not mandatory, trimming overly long roots can help encourage new, vigorous growth in graptopetalum 'Mirinae' . But remember to be gentle to avoid unnecessary damage.
How much water does my newly transplanted graptopetalum 'Mirinae' need?
Water your graptopetalum 'Mirinae' thoroughly right after transplanting. Then, keep the soil consistently moist, but not waterlogged. Over-watering can lead to root rot.
What should I do if the leaves of my transplanted graptopetalum 'Mirinae' start wilting?
Wilting after transplanting can be a sign of transplant shock. Keep the soil appropriately moist and consider using a transplant shock prevention product or a natural solution like compost tea.
Can I transplant graptopetalum 'Mirinae' plant in a smaller pot?
Transplanting graptopetalum 'Mirinae' into a smaller pot may stunt its growth. Choose a pot that's slightly larger than the current one to allow the roots space to grow and breathe.
What type of soil is best for transplanting graptopetalum 'Mirinae'
Graptopetalum 'Mirinae' prefers well-draining soil. A mix of sandy soil with organic matter is ideal. Avoid clay soils as they can hold too much moisture and cause root rot.
How long will it take for graptopetalum 'Mirinae' to fully recover after being transplanted?
It depends on graptopetalum 'Mirinae' 's size and health before transplanting. On average, expect signs of new growth within 2-4 weeks. Be patient and provide consistent care to help it bounce back.
Discover information about plant diseases, toxicity, weed control and more.
1 / 5
