When watering the Resurrection plant, you should aim to use filtered water that is at room temperature. Filtered water is better for this plant, as tap water can contain particles that are harmful to its health. The reason that the water should be at room temperature or slightly warmer is that the Resurrection plant comes from a warm environment, and cold water can be somewhat of a shock to its system. Also, you should avoid overhead watering for this plant, as it can cause foliage complications. Instead, simply apply your filtered room temperature water to the soil until the soil is entirely soaked. Soaking the soil can be very beneficial for this plant as it moistens the roots and helps them continue to spread through the soil and collect the nutrients they need.

Both overwatering and underwatering will be detrimental to the health of your Resurrection plant, but overwatering is a far more common issue. When this species receives too much water, its stems and leaves may begin to wilt and turn from green to yellow. Overwatering over a prolonged period may also lead to diseases such as root rot, mold, and mildew, all of which can kill your plant. Underwatering is far less common for the Resurrection plant, as this plant has decent drought tolerance. However, underwatering remains a possibility, and when it occurs, you can expect to find that the leaves of your Resurrection plant have become brittle and brown. It is crucial that you notice the signs of overwatering as soon as possible when caring for your Resurrection plant. Some of the diseases that arise from overwatering, such as root rot, may not be correctable if you wait too long. If you see early signs of overwatering, you should reduce your watering schedule immediately. You may also want to assess the quality of soil in which your Resurrection plant grows. If you find that the soil drains very poorly, you should replace it immediately with a loose, well-draining potting mix. On the other hand, if you find signs that your Resurrection plant is receiving too little water, all you need to do is water more regularly until those signs have subsided.

If your plant is in a pot. The most precise way to decide whether your Resurrection plant needs water is to plunge your finger into the soil. If you notice that the first two to three inches of soil have become dry, it is time to add some water. If you grow your Resurrection plant outdoors in the ground, you can use a similar method to test the soil. Again, when you find that the first few inches of soil have dried out, it is time to add water. During the spring and early fall, this method will often lead you to water this plant about once every week. When extremely hot weather arrives, you may need to increase your watering frequency to about twice or more per week. With that said, mature, well-established the Resurrection plant can show an admirable ability to withstand drought.

When it comes time to water your Resurrection plant, you should not be shy about how much water you give. With the first two to three inches of soil dry, this plant will appreciate a long and thorough watering. Supply enough water to soak the soil entirely. The amount of water you add should be enough to cause excess water to flow through the drainage holes at the bottom of your pot. If you don’t see excess water draining from the pot, you have likely underwatered your plant. But do not let the water accumulate inside the soil, which will be very dangerous to the plant as well. Alternatively, a lack of water draining through the pot could indicate poorly draining soils, which is detrimental to the health of this plant and should be avoided. If the plant is outside, 1 inch of rain per week will be sufficient.

The water needs of the Resurrection plant can change depending on growth stages as well. For example, when your Resurrection plant is in the first few years of its life, or if you have just transplanted it to a new growing location, you will need to give more water than usual. During both of those stages, your Resurrection plant will put a lot of energy towards sprouting new roots that will then support future growth. For those roots to perform their best, they need a bit more moisture than they would at a more mature phase. After a few seasons, your Resurrection plant will need much less water. Another growth stage in which this plant may need more water is during the bloom period. Flower development can make use of a significant amount of moisture, which is why you might need to give your Resurrection plant more water at this time.

The Resurrection plant will have its highest water needs during the hottest months of the year. During the height of summer, you may need to give this plant water more than once per week, depending on how fast the soil dries out. The opposite is true during the winter. In winter, your plant will enter a dormant phase, in which it will need far less water than usual. In fact, you may not need to water this plant at all during the winter months. However, if you do water during winter, you should not do so more than about once per month. Watering too much at this time will make it more likely that your Resurrection plant will contract a disease.

It is most common to grow the Resurrection plant indoors for any gardener that does not live in temperate and tropical regions. Those gardeners should consider the fact that soil in a container can dry out a bit faster than ground soil. Also, the presence of drying elements such as air conditioning units can cause your Resurrection plant to need water on a more frequent basis as well. if you planted it outside. When that is the case, it’s likely you won’t need to water your Resurrection plant very much at all. If you receive rainfall on a regular basis, that may be enough to keep your plant alive. Alternatively, those who grow this plant inside will need to water it more often, as allowing rainwater to soak the soil will not be an option.

The usual goal for the Resurrection plant is to have it grow as big and full as possible. While the plant doesn’t require consistent trimming, it can benefit by removing old flowers and any damaged, dead, or diseased leaves. You can also trim back the leaves if it is starting to get too big for the pot and space you are keeping it.

Resurrection plant don’t have a winter dormancy cycle at the suitable temperature. With that said, their growth does slow down as the days get shorter, however the leaves don’t die. What does that mean for pruning? It means there’s no specific season where it’s better to prune. Ideally, you will want to wait until the flower blooms before pruning it, which can take about a month after the appearance of the blossom. With deadheading, you’ll want to do this around late spring or when only a few of the blossoms have faded. You should always prune brown or yellow leaves when you notice them. Throughout the growing phase, make sure to pay close attention to any potential diseased leaves and remove these as necessary.

Once you’ve pruned your plant, you should dispose of the stems and leaves either by composting the healthy ones or throwing out the diseased parts. You can also fertilize just before or after pruning, which gives Resurrection plant a little vitamin boost that can provide it the nutrients needed to better protect itself from any nearby pathogens or diseases. You don’t need much after care when you’re done pruning. It might benefit from light watering and some liquid plant food to encourage new blooms and growth.

Chances are you’re not getting the Resurrection plant from seed, which means you’re already getting a mature plant. Since the plant doesn’t have a true dormancy cycle, there are really only two phases: blooming and non-blooming. While the plant is blooming, you should only remove yellow or dead leaves and cut off any brown tips on the leaves. Avoid doing too much pruning during this time as it can stress the plant. Still, you should remove any diseased or dead leaves to keep your plant presentable. The best time to prune is after the blossoms have already wilted. You can remove both the spent blossoms and any old and yellowed leaves at the same time. If you’re noticing a large amount of yellow leaves, you might be overwatering your plant or not giving it enough nutrients. While yellow or brown leaves don’t always mean there’s an issue, if you notice a large amount of leaves shifting colors, it usually means there’s a problem with the plant.

As an evergreen plant, Resurrection plant doesn’t have the same cycles as those found in colder areas. The leaves will remain green throughout the year, which is one of the many reasons it is a popular houseplant. If you want to deadhead, you should do so after the blossoms have already wilted. Throughout the growing phase, make sure to pay close attention to any potential diseased leaves and remove these as necessary.

How you prune the Resurrection plant will depend on whether you’re performing general care or deadheading. For general care, simply cut off the blossoms that have already died. Make sure to get as close to the base as possible and snip at a 45-degree angle. Repeat this for all stalks with wilting blooms. After that, trim back any outer leaves that are old and yellowing. If you simply want to thin the plant out, start with the outermost leaf and work your way in. Avoid removing more than 30 percent of the leaves at once. Throughout the growing phase, make sure to pay close attention to any potential diseased leaves and remove these as necessary.

Resurrection plant requires about 3-6 hours of direct sunlight each day to thrive. However, it also needs some shade during the hottest parts of the day to prevent sun damage. Morning sunlight is ideal for Resurrection plant, but it can also tolerate some afternoon sun if the temperature is not too hot. To provide the perfect balance of sunlight, try planting Resurrection plant in an area that gets partial sun, such as under a tree or on the east side of a building.

If Resurrection plant is exposed to too much direct sunlight, its leaves may turn yellow, dry out, or even burn. You may also notice that the plant wilts or becomes stunted. To prevent sun damage, make sure to give Resurrection plant some shade during the hottest parts of the day. You can use a shade cloth or plant Resurrection plant near taller plants that can provide some natural shade.

If Resurrection plant doesn't get enough sunlight, it may grow tall and lanky, with sparse foliage. The leaves may also turn yellow or pale green, indicating that the plant is not producing enough chlorophyll due to lack of sunlight. To remedy this, try moving Resurrection plant to a sunnier spot, or prune nearby foliage to allow more light to reach the plant.

Resurrection plant prefers cooler weather, and has a specific temperature range you can keep it within to maximize growth. For Resurrection plant to be as healthy as it possible can, you could keep them between the temperatures 65~75℉(18~25℃). Resurrection plant can handle higher and lower heat levels, but whenever possible, try to keep the area you grow them in within several degrees of 65~75℉(18~25℃). If you can’t keep Resurrection plant precisely within that range, it doesn’t mean they will stop growing. Resurrection plant can handle a higher and lower range before they begin to suffer damage or reduced growth. On the higher end, that temperature would that would fall between 75~85℉(25~30℃). On the lower end, Resurrection plant can handle temperatures as low as 5℉(-15℃). The higher temperature range is the most important to observe, as Resurrection plant prefers cooler environments. Letting temperatures get above the upper range may cause growth to slow, and having Resurrection plant above 85℉(30℃) could result in the plant dying.

Too much heat early in the growing stages of Resurrection plant may give it an unhealthy appearance, so it's important to keep your growing space between 65~75℉(18~25℃). You’ll want to stay in the colder part of this range as Resurrection plant, but make sure not to go below -5℉(-20℃). Extremely cold temperatures can hinder growth at any stage for Resurrection plant, though they aren’t nearly as damaging as extremely hot temperatures. If temperatures are kept high during the budding stage, Resurrection plant may not flower at all.

Tip #1: Grow in the Coldest Room of Your Home If you plan to grow Resurrection plant indoors, make sure to choose the coldest room of your home. This will usually be on the side of your house that doesn’t experience the harsh heat that the sun can produce in the middle of the day. At the same time, you’ll need to ensure the room does get a healthy amount of sunlight. While you’ll want to spare your plants from the brightest and hottest part of the day, zero sunlight can drastically reduce Resurrection plant ability to grow. Tip #2: If Resurrection plant Doesn’t Flower Properly, It May Be Too Hot The growing season for Resurrection plant, spring and early summer, can occasionally come with high temperatures. These fluctuations can negatively affect the growing stage of Resurrection plant, causing flowering buds to change into non-flowering buds. These buds will open partially, or in some cases not at all, causing Resurrection plant to lose some of its aesthetic quality. It's important to stay in the range of 65~75℉(18~25℃), for that reason, so your Resurrection plant can flower to its full potential. Tip #3: Avoid Frost While Resurrection plant can tolerate lower temperatures, as low as -5℉(-20℃), it will not do well if it encounters significant frost. If left out in the colder temperatures of late fall or winter, Resurrection plant will begin to show the signs of frost damage. To recognize the signs of frost damage, you’ll look for several key aesthetic changes. First, parts of Resurrection plant will begin to wilt. Then, those sections will start to become discolored, eventually turning brown or black as they die. Any parts of Resurrection plant that turn these colors cannot be saved, and will have to be pruned if you intend to keep the plant alive.

It's important to keep the temperature of your growing area steady regardless of season. If you live in an area with harsh winters or very hot summers, it may be best to put your plants inside. That way, you can keep them in a cool room where Resurrection plant would be able to grow in the best possible conditions. If you do leave your plants outside, make sure to observe the temperature closely. If the summer’s get especially hot in your climate-zone, make sure that your plants aren’t exposed to temperatures above 85℉(30℃). This will dehydrate and damage Resurrection plant quickly, and before long, they will begin to die.

If you intend to place Resurrection plant outside, you’ll want to make sure that it has shade from the heat of the midday sun. While Resurrection plant does need plentiful sunlight to grow to its full potential, direct sunlight can cause a rise in temperature and damage certain elements of the plant. Choose an area that has shade providing structures or tall trees that can shield Resurrection plant from the hottest parts of the day. If your climate isn’t appropriate for Resurrection plant or you don’t have the proper space in your garden, you can also plant them inside. Controlling the temperature is much easier indoors, and having proper fans, ventilation, or an A/C unit will allow you to stay within the optimum range of 65~75℉(18~25℃).

Fertilization is important to the Resurrection plant for several general reasons. Mainly, fertilization helps Resurrection plant and other plants by providing key nutrients that help the plant grow both above and below ground. However, the overall fertilization needs for a Resurrection plant are relatively low. At times, a Resurrection plant may survive well without fertilization. However, annual fertilization is can be very beneficial to the Resurrection plant, as it will help keep the plant alive and may also encourage your Resurrection plant to create better flowers that last for longer. As such, those interested in helping their Resurrection plant look its best should keep up with annual fertilization.

The ideal time to fertilize a Resurrection plant is in the late winter to early spring. During that time, your Resurrection plant will be exiting its dormant phase and entering a phase of active growth. Fertilization at this time allows the plant to get off to a great start for the season by encouraging healthy growth. While it is generally most advantageous to fertilize a Resurrection plant during the early spring, it is also permissible to fertilize a Resurrection plant during the fall too. However, summer and winter remain the seasons in which it is not a good idea to feed a Resurrection plant.

You should not fertilize your Resurrection plant during any time of the year except during the late winter and early spring. The low fertilization needs of this plant allow a single annual feeding to suffice. Continuing to fertilize throughout spring, summer, and fall can easily lead to overfertilization and all of the complications that can come with it. The only exception is if you did not fertilize in spring, which means that it is permissible to feed this plant in fall. Along with refraining from fertilizing for most of the growing season, there is also no reason to fertilize this plant during the winter. In winter, the Resurrection plant will be in a dormant growth phase, meaning that it does not put forth new growth. With that being the case, fertilization during most of the winter is not advisable.

Nearly any kind of general-purpose fertilizer with a balanced amount of the three main plant nutrients will work well for a Resurrection plant. However, there are a few specific nutrient blends that can be even more beneficial. For instance, many gardeners follow the belief that higher volumes of phosphorus make for stronger roots and better flowers. Since Resurrection plant is a flowering plant, applying a phosphorus-rich fertilizer may be the best approach. You can use a fertilizer that comes in a granular form or a liquid form as long as there are plenty of nutrients present. Outside of manufactured fertilizers, you can also use more organic means to improve the soil for your Resurrection plant. Mainly, compost, manure, and similar materials can go a long way towards creating a healthy growing medium for your Resurrection plant.

The most common way to fertilize a Resurrection plant is to apply a granular or pellet fertilizer to the soil around your plant. Remember that the ideal time to fertilize is as the plant is exiting its winter dormant growth phase and entering a phase of active growth. In early spring, wait until the plant begins to send shoots through the soil, and then apply your fertilizer. Some people may choose to use a liquid fertilizer instead of a granular one. In that case, you should dilute the fertilizer with water before applying it. Regardless of whether you use granular or liquid fertilizer, it is always best to moisten the soil before, during, and after you apply fertilizer.

As you care for your Resurrection plant, recall that this plant does not need a lot of fertilizer each year and will begin to suffer if it receives too much. Firstly, any overfertilized plant runs the risk of fertilizer burn, a condition in which excessive amounts of fertilizer draw nutrients and moisture out of the plant's roots, causing its decline. Also, overfertilizing a Resurrection plant is also a way of weakening your plant and making disease far more likely. There is also a potential that overfertilization could cause your Resurrection plant to flower less or not at all, which is a significant detriment considering the blooms of this plant are what make it so valuable and sought after by so many gardeners.