Silvervein creeper (Parthenocissus henryana) Flower, Leaf, Care, Uses

Sand, Clay, Loam, Chalky, Sandy loam, Acidic

Sunlight

Partial sun, Full sun, Full shade

Hardiness Zones

6 to 9

Planting Time

Mid spring, Late spring, Summer, Fall

Harvest Time

Late summer, Early fall, Mid fall

Know the light your plants really get.

Find the best spots for them to optimize their health, simply using your phone.

Download the App

A Botanist in Your Pocket

Scan QR code to download

Silvervein creeper

Water

Every week

Sunlight

Partial sun

Planting Time

Mid spring, Late spring, Summer, Fall

Download and print this plant care card and attach it to your plants

Download

Questions About Silvervein creeper

Watering

Pruning

Sunlight

Temperature

Fertilizing

What's the best method to water my Silvervein creeper?

You might want to put a garden hose at the plant base to ensure that you're promoting excellent root development. Avoid directly spraying the leaves, and know that the leaves will require more watering if they are outdoors and facing direct sunlight. You can also use bubblers that you can put on to each plant to moisten the roots. Also, use soaker hoses that can cover the entire garden or bed when adding or removing plants to push the roots deeply. Drain any excess water and wait for the soil to dry before watering. Water at ground level to prevent diseases. On a sunny day, you might want to spray the entire bush with water. Whether potted or in-ground, please remember Silvervein creeper prefers deep watering over light sprinkling.

What should I do if I water Silvervein creeper too much/too little?

An overwatered Silvervein creeper can start to have leaves that turn yellow, drop off and wilt. The plant can also look dull and unhealthy, with signs of mushy stems. When they are beginning to show these signs, it's best to adjust your schedule whenever possible.

The wilting can also be a sign of under watering as well. You might see that the leaves begin to turn crispy and dry while the overwatered ones will have soft wilted leaves. Check the soil when it is dry and watering is not enough, give it a full watering in time. Enough water will make the Silvervein creeper recover again, but the plant will still appear dry and yellow leaves after a few days due to the damaged root system. Once it return to normal, the leave yellowing will stop .

Always check the moisture levels at the pot when you have the Silvervein creeper indoors. Avoid overwatering indoors and see if there are signs of black spots. If these are present, let the soil dry in the pot by giving it a few days of rest from watering.

Overwatering can lead to root rot being present in your plant. If this is the case, you might want to transfer them into a different pot, especially if you see discolored and slimy roots. Always prevent root rot as much as possible, and don't let the soil become too soggy.

You should dig a little deeper when you plant your Silvervein creeper outdoors. When you check with your fingers and notice that the soil is too dry, it could mean underwatering. Adequate watering is required to help the plant recover.

How often should I water my Silvervein creeper?

The Silvervein creeper likes deep and infrequent watering. You would want to soak them in a gallon of water each time, especially when they are planted in pots. The water storage of flower pots is limited and the soil will dry out faster. Watering is required every 3 to 5 days when living in a cold region. Water it early in the morning when the soil is dry, outdoors or indoors. You can also determine if watering is needed by checking the soil inside. When the top 2-3 inches of soil is dry, it is time to give the plant a full watering. During hot days, you may need to check the moisture daily, as the heat can quickly dry out the soil in the pot.

Irrigation of the soil is also required if you have a garden. When you live in a hot climate, you might want to water once a week. Only water when you notice that about 2 to 3 inches of soil become too dry outdoors or indoors. Consider the amount of rainwater on the plant and ensure not to add to it to prevent root rot.You may not need additional watering of the plants if there is a lot of rainfall.Silvervein creeper generally grows during spring and fall. When they are outdoors, you need to add mulch about 3 to 4 inches deep to conserve more water.

You need to water the plants more frequently in sandy soil because this type tends to drain faster. However, with the clay one, you need to water this less frequently where you could go for 2-3 days to dry the plant and not develop any root rot. You could mark the date on the calendar whenever you water and when you notice that the leaves are starting to droop. This can mean that you might be a day late.

How much water do I need to give my Silvervein creeper?

The Silvervein creeper generally needs about a gallon of water each schedule,With the potted plants, you might want to water them deeply until you see that the water is dripping at the bottom of the pot. Then, wait for the soil to dry before watering them again. You can use a water calculator or a moisture meter to determine the amount you've given to your plant in a week. Provide plenty of water, especially in the flowering period, but let the moisture evaporate afterwards to prevent root rot.

If Silvervein creeper is planted outdoor with adequate rainfall, it may not need additional watering. When Silvervein creeper is young or newly planted, make sure it gets 1-2 inches of rain per week. As Silvervein creeper continues to grow, it can survive entirely on rainfall. Only when the weather is too hot, or when there is no rainfall at all for 2-3 weeks, then consider giving Silvervein creeper a full watering during the cooler moment of the day to prevent the plant from suffering from high heat damage. Additional watering will be required during persistent dry spells.

Should I adjust the watering frequency for my Silvervein creeper according to different seasons or climates?

The Silvervein creeper needs outdoors come from rain, with only persistent dry weather requiring watering. Throughout the spring and fall growing seasons, the soil needs to be kept moist but not soggy, and alternating dry and moist soil conditions will allow the Silvervein creeper to grow well. Throughout the summer, hot weather can cause water to evaporate too quickly, and if there is a lack of rainfall, you will need to water more frequently and extra to keep it moist.

Usually, the Silvervein creeper will need less water during the winter. Since the Silvervein creeper will drop their leaves and go dormant, you can put them into a well-draining but moisture-retentive soil mixture like the terracotta to help the water evaporate quicker. Once your Silvervein creeper growing outdoors begins to leaf out and go dormant, you can skip watering altogether and in most cases Silvervein creeper can rely on the fall and winter rains to survive the entire dormant period.

After the spring, you can cultivate your Silvervein creeper and encourage it to grow and bloom when the temperature becomes warmer.This plant is not generally a fan of ponding or drought when flowering. You must ensure that the drainage is good at all times, especially during the winter.

When the plant is in a pot, the plant has limited root growth. Keep them well-watered, especially if they are planted in pots during summer. They don't like cold and wet roots, so provide adequate drainage, especially if they are still growing.

It's always best to water your Silvervein creeper’s diligently. Get the entire root system into a deep soak at least once or twice a week, depending on the weather. It's best to avoid shallow sprinkles that reach the leaves since they generally encourage the growth of fungi and don't reach deep into the roots. Don't allow the Silvervein creeper’s to dry out completely in the fall or winter, even if they are already dormancy.

Don't drown the plants because they generally don't like sitting in water for too long. They can die during winter if the soil does not drain well. Also, apply mulch whenever possible to reduce stress, conserve water, and encourage healthy blooms.

What should I be careful with when I water my Silvervein creeper in different seasons, climates, or during different growing periods?

If planting in the ground, Silvervein creeper mostly relies on rain. However, if there is no rainfall for 2-3 weeks, you may need to give proper consideration to giving the plants a deep watering. If watering Silvervein creeper in summer, you should try to do it in the morning. A large temperature difference between the water temperature and the root system can stress the roots. You need to avoid watering the bushes when it's too hot outside. Start mulching them during the spring when the ground is not too cold.

The age of the plants matter. Lack of water is one of the most common reasons the newly planted ones fail to grow. After they are established, you need to ease off the watering schedule.

Reduce watering them during the fall and winter, especially if they have a water-retaining material in the soil. The dry winds in winter can dry them out, and the newly planted ones can be at risk of drought during windy winter, summer, and fall. Windy seasons mean that there's more watering required. The ones planted in the pot tend to dry out faster, so they need more watering. Once you see that they bloom less, the leaves begin to dry up.

Potted plants are relatively complex to water and fluctuate in frequency. Always be careful that the pot-planted plant don't sit in the water. Avoid putting them in containers with saucers, bowls, and trays. Too much watering in the fall can make the foliage look mottled or yellowish. It's always a good idea to prevent overwatering them regardless of the current climate or season that you might have. During the months when Silvervein creeper begins to flower, you might want to increase the watering frequency but give it a rest once they are fully grown.

Give them an adequate amount of water once every 3 to 5 days but don't give them regular schedules. Make sure the soil is dry by sticking your finger in the pot, or use a moisture meter if you're unsure if it's the right time. Too much root rot can cause them to die, so be careful not to overwater or underwater regardless of the climate or season you have in your area.

Why is watering my Silvervein creeper important?

Watering the Silvervein creeper helps transport the needed nutrients from the soil to the rest of the plant. The moisture will keep this species healthy if you know how much water to give. The watering requirements will depend on the weather in your area and the plant's soil.

The Silvervein creeper thrives on moist soil, but they can't generally tolerate waterlogging. Ensure to provide enough mulch when planted on the ground and never fall into the trap of watering too little. They enjoy a full can of watering where the water should be moist at the base when they are planted in a pot to get the best blooms.

If they are grown as foliage, you need to water them up to a depth of 10 to 20 inches so they will continue to grow. If it's raining, refrain from watering and let them get the nutrients they need from the rainwater.

How can I prune my Silvervein creeper?

Pruning your Silvervein creeper is a fairly simple process. First, you will need a reliable set of hand pruners or hedge trimmers. You may use a clean pair of sharp scissors if you don’t have pruners or garden shears on hand. It’s important to always clean your gardening tools before and after using them to prevent the possibility of spreading disease or infection to other plants. To prune your Silvervein creeper simply allow your plant to go dormant over the Winter. Some time between late winter and early spring – or when new growth starts to appear – take your clean pruners or trimmers and cut away any dying, damaged, yellow or declining foliage. Repeat this process until you reach the base of the plant or until there are no dead pieces left to cut. When pruning, be careful not to damage the new growth that may be emerging near the base of your plant. These parts cannot be restored and pruning can increase the ventilation of the plants and facilitate their growth. Any pruning that is done to this plant should be cut straight across the blades or stems. No angled cuts are required. Diseased leaf blade foliage can be removed as it appears. This could be done anytime when your Silvervein creeper is growing.

What should I do after pruning my Silvervein creeper?

Once you’ve pruned your plant, you should dispose of the stems and leaves either by composting the healthy ones or throwing out the diseased parts. You can also fertilize just before or after pruning, which gives Silvervein creeper a little vitamin boost that can provide it the nutrients needed to better protect itself from any nearby pathogens or diseases. Do not water the Silvervein creeper immediately after pruning as this can lead to fungal infestation of the plants through the wounds. You don’t need much after care when you’re done pruning. It might benefit from light watering and some liquid plant food to encourage new growth.

How can I prune my Silvervein creeper during different seasons?

Early spring and late winter are the best times to prune your Silvervein creeper on a large scale. If you want to control the size of your Silvervein creeper, you can prune them as you wish, but be careful not to prune more than a third of the size of the plant. Yellow and diseased leaves may appear during the summer months when the Silvervein creeper is growing vigorously and these types of leaves need to be pruned back immediately. These parts of the Silvervein creeper cannot be restored and pruning increases the ventilation of the plant and facilitates its growth.

When should I prune my Silvervein creeper through different stages of growth?

Strategic pruning is usually done at different times of the year or during certain stages of growth depending on the plant. However, knowing when to prune your Silvervein creeper depends on where you live and how established your plant is. For example, if your Silvervein creeper is a new resident, it’s a good idea to wait until the plant starts to grow back before you start pruning. On the other hand, if your plant is already established, you will want to prune the dry or dead parts in plant before new leafy growth appears in early spring or late winter. This is the time of year when plants are dormant and pruning causes the least damage to them. This is also the best time of year to do more extensive pruning. It’s important to note that if Silvervein creeper is pruned too late in the season, it can leave new growth at risk for damage or disease. However, if your Silvervein creeper is indoors this is not a problem and you can prune at any time. Since this can affect the long-term health and appearance of your plant, it’s important to keep this in mind when deciding when and how to prune. As your Silvervein creeper grows larger over time, you can trim it as needed after annual pruning. Dead, damaged, or diseased leaf blade foliage can be removed as it appears. This could be done anytime when your Silvervein creeper is growing.

What is the optimal temperature for Silvervein creeper?

The best temperature for Silvervein creeper to thrive is 65~80℉(18~27℃). During the primary growing phase, the highest temperature tolerable would be 95℉(35℃), while the lowest tolerable temperature would be 15℉(-10℃). This species is tolerant of low temperatures and will survive freezing winters. The perfect, highest, and lowest temperature range:

Perfect：65~80℉(18~27℃)

Highest：85~95℉(30~35℃)

Lowest：-5~15℉(-20~-10℃) or below

Should I adjust the temperature for Silvervein creeper during different growing phases?

Research shows that Silvervein creeper will begin to exhibit signs of stunted growth during prolonged periods of higher temperatures, especially during the development of axillary buds and the growth of main shoots. Keeping the temperatures consistent and cooler, around 65℉(18℃), will encourage vigorous growth after germination or transplanting.

How can I keep Silvervein creeper warm in cold seasons?

Silvervein creeper can withstand freezing temperatures when planted in the ground in areas that don’t get below of 15℉(-10℃) as an extreme temperature during the winter months. But if planted in pots or containers, then their roots must be protected from the winter cold. Do this by wrapping the container in a blanket or bringing it inside where it will be fully protected from the elements.

What damage will Silvervein creeper suffer if the temperature is too high/low?

Greater harm will come to Silvervein creeper if the temperature is consistently too high versus too low.

If Silvervein creeper gets too hot, seed germination and photosynthesis efficiency is lessened due to hormone triggers caused by heat stress. The plant will show signs through wilting, leaf browning, and potentially death.

If Silvervein creeper gets too cold, plant functions such as nutrient uptake and photosynthesis will cease, resulting in the possible death of the plant. If a single freezing event occurs during the growing season, then a membrane phase transition might occur, which can cause a cease in plant functions and death of the plant.

What tips and cautions should I keep in mind when it comes to temperature for Silvervein creeper?

Keeping the soil temperature consistent is one of the most important strategies to keeping Silvervein creeper healthy, which leads to successful budding, flowering, and new growth. Do this by consistently watering, adding mulch to bare soil, and planting in the shade.

How can I keep Silvervein creeper warm without a heat pad?

Due to the cold tolerance of Silvervein creeper, heating pads will not be necessary if planted outside in the ground. If the plant is in an outdoor pot, then bring it inside a heated house and place it in a sunny window during the winter months.

How can I provide Silvervein creeper with an adequate temperature condition?

To ensure adequate temperature conditions are present, plant Silvervein creeper in an area with partial shade. If possible, use afternoon shade to provide the best protection during the hottest part of the day. This will also result in lower temperatures in the soil due to increased moisture retention. If Silvervein creeper is planted indoors, then keep the container away from windows and out of direct sunlight during the summer months to prevent the soil temperature from spiking daily.

How can I save Silvervein creeper from temperature damage?

During the summer or times of high heat, give Silvervein creeper extra shade and water to help cool its leaves, roots, and soil. During cold snaps or growing season freezes, cover sensitive budding vegetation with frost cloth or water using sprinkler systems. If it’s only nearing freezing temperatures for a short period, then water during the day several hours before the freeze. If the temperature is predicted to remain below freezing for an extended period, then keep the sprinkler running until the temperature rises above freezing the following day.

Should I adjust the temperature for Silvervein creeper in different seasons?

Silvervein creeper is a mid-temperature plant that can easily tolerate the typical fluctuations of the seasons and remain a hardy species when planted in maintained landscapes areas, containers, or indoors. Therefore, adjusting the temperature during the different seasons is unnecessary for primary growth. If flowering is stunted or impeded, then allowing the plant to experience a season of winter freeze could help to revive flowering.

Under what conditions should I stop adjusting the temperature for Silvervein creeper?

If it becomes too difficult to lower the temperature for an indoor plant during the summer, then plant it outside in the ground or in a container. Make sure to plant Silvervein creeper in a shaded location and water often to keep the soil moist.

Why do I need to fertilize my Silvervein creeper?

Regardless of which kind of Silvervein creeper you own, regular fertilization will help you grow a plant that has great overall health. The proper supply of nutrients leads to more vigorous growth and can help your Silvervein creeper be more resilient to tough growing conditions while also gaining a better ability to fight off diseases and pests.

The foliage of your Silvervein creeper is one of its most attractive features, which is why you should do all you can to keep it intact. Again, this means creating and adhering to a regular fertilization schedule that is specific to your Silvervein creeper. Doing so will prompt your Silvervein creeper to develop leaves with a deep color and a lush overall look.

When is the best time to fertilize my Silvervein creeper?

The first time that you should fertilize your Silvervein creeper is during the late winter or early spring. This type of fertilization gives your Silvervein creeper all the nutrients it needs to resume healthy growth once the weather gets warm enough.

It is also beneficial to many Silvervein creeper to provide an additional fertilizer feeding during early fall if you in a warm climate region. Fertilizing in early fall not only adds additional nutrients to the soil, which your Silvervein creeper will use in the following growing season, but it also helps your Silvervein creeper be a bit more hardy and capable of surviving the winter cold without experiencing foliage damage. Earlier fertilisation will ensure that the new branches have enough time to grow to withstand the cold winter.

When should I avoid fertilizing my Silvervein creeper?

There are a few times during the year when you should not fertilize your Silvervein creeper. The first time occurs during the early and mid-winter months, during which time your Silvervein creeper will be dormant and in no need of feeding.

It is also unwise to fertilize this plant during the late spring and all of the summer. During that time of year, the weather will likely be hotter and can be much dryer as well. Both conditions make it more likely that your Silvervein creeper will have a very negative response to fertilization. To avoid such issues, stick to a fertilization schedule that involves feeding exclusively during early spring and early fall.

What type of fertilizer does my Silvervein creeper need?

In most cases, the most important nutrient for a Silvervein creeper is nitrogen, but that does not mean that phosphorus and potassium are unimportant. On the contrary, your Silvervein creeper likely needs a decent amount of all three main nutrients, which is why a balanced fertilizer, such as a 10-10-10, can work well.

However, a more nuanced ratio of nutrients often leads to optimal growth for a Silvervein creeper. Often, fertilizers that are a bit higher in nitrogen work a bit better. For example, a ratio of 10-6-4 can often work well. When fertilizing, you can use a granular fertilizer or a liquid-based one.

How do I fertilize my Silvervein creeper?

To fertilize your Silvervein creeper using a granular fertilizer, all you need to do is sprinkle the fertilizer on the soil at the correct time. The slow-release nature of granular fertilizer will release nutrients into the soil slowly over time. As is usually the case, it's best to water your Silvervein creeper, at least lightly, before applying fertilizer.

As an alternative, you can use a liquid fertilizer, but this is less common. To use this approach, mix your fertilizer with water, then pour the water onto the soil around the base of your Silvervein creeper. At times, it is beneficial to perform a soil test before fertilizing to see if you will need to alter the pH at all.

What happens if I fertilize my Silvervein creeper too much?

Overfertilization is always a risk when you are feeding a Silvervein creeper. Overfertilization is especially likely if you feed this plant at the wrong time of year, feed it too often, or feed it without watering the soil first.

When overfertilization takes place, your Silvervein creeper may begin to develop brown leaves. Your Silvervein creeper can also show stunted growth in some cases. On the other hand, it is also possible that too much fertilizer can prompt your Silvervein creeper to rapidly produce too much new growth, much of which will be weak and prone to breaking. Weak new wood can also detract from the overall form and structure of your Silvervein creeper.

Get tips and tricks for your plants.

Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.

Common Pests & Diseases

Common issues for Silvervein creeper based on 10 million real cases

Caterpillars

Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.

Solutions: Even though caterpillars are diverse, they all chew on plant parts and can cause significant damage if present in large numbers. For severe cases: Apply insecticide. For an organic solution, spray plants with a Bacillus thuringiensis (Bt), which specifically affects the larval stage of moths and butterflies. Be sure to coat plants, since caterpillars need to ingest Bt for it to be effective. This will not harm other insects. Spray a chili extract. Chili seeds can be cooked in water to make a spicy spray that caterpillars don't like. Spray this mixture on the plants, but be aware it will also be spicy to humans. Introduce beneficial insects. Release beneficial insects to the garden that eat caterpillars, such as parasitic wasps. For less severe cases: Hand pick. Using gloves, pick off caterpillars on plants and dispose of them in a bucket of soapy water. Dust plants with diatomaceous earth. This powder is harmless to humans but irritates caterpillars. Therefore, it will make it difficult for caterpillars to move and eat.

Sap-sucking insects

Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.

Solutions: Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it. Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find. Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray. Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.

Scars

Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.

Solutions: Each source of scarring requires a different approach to help your plant recover. Protect the trunk and leaves from physical damage like scrapes. If pests or disease are the cause of scarring, isolate the plant from others to avoid further spread. Some pests can be removed with organic remedies such as a soft cloth and soapy water solution or diluted isopropyl alcohol spray. Stop sunburn by moving your plant away from direct sunlight and making sure it has the water it needs. Frequent leaf or bud loss may be due to insufficient light or nutrients.

Plant dried up

The entire plant may dry out due to dieback or normal seasonal dormancy.

Solutions: The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method. Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly. Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems. Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species. Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil. Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.

Treat and prevent plant diseases.

AI-powered plant doctor helps you diagnose plant problems in seconds.

Distribution Map

Habitat

Moist rocks

Native

Cultivated

Invasive

Potentially invasive

Exotic

No species reported

More Info

Plant Type

Vine

Flower Color

Green

Leaf Color

Green

White

Red

Scientific Classification

Phylum

Vascular plants

Class

Dicotyledons

Order

Vitales

Family

Grape

Genus

Parthenocissus

Species

Silvervein creeper

Find your perfect green friends.

Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.

Plant Collection Most Common Vine Cape honeysuckle See More Cape honeysuckle (Tecoma capensis) is a flowering plant native to South Africa. Despite the word honeysuckle occurring in its common name, the Cape honeysuckle is not related to the honeysuckle. Cape honeysuckle is often planted in garden hedgerows and is considered an invasive species in someContinue reading “Most Common Vine”

Plant Collection Best Perennial Plant to Grow Orange daylily See More The Orange daylily is a perennial plant known for its captivating lily-like blooms. Its natural habitats are meadows and forests, but it is also a common garden plant in temperate regions around the world. Each individual flower lasts only a day, but the plantContinue reading “Best Perennial Plant to Grow”

Plant Collection Suggested Plants to Build a Garden That Blooms All the Year Round Bearded iris See More BloomTime:Spring The Bearded iris is a flowering plant that appears in many different colors. It is a popular garden plant because it’s easy to grow. Though their native lands are in Europe, Bearded irises are often grownContinue reading “Suggested Plants to Build a Garden That Blooms All the Year Round”

Plant Collection Best Perennial Plant to Grow China rose See More The China rose (Rosa chinensis) is a Southwest China native. The plant has been cultivated for so long that it has become hard to tell the difference between wild and cultivated varieties. With medium-sized clusters of flowers and a long blooming season, it isContinue reading “Best Perennial Plant to Grow”

Plant Collection Most Common Vine Cucumber See More Cucumber (Cucumis sativus) is a creeping vine native to South Asia. It has a long history of cultivation – mentions of its use are found in various ancient scripts, including the Bible, Epic of Gilgamesh and Pliny the Elder’s “Natural History”. Today, Cucumber is one of theContinue reading “Most Common Vine”

Sand, Clay, Loam, Chalky, Sandy loam, Acidic

Plant Collection Suggested Plants to Build a Garden That Blooms All the Year Round White mulberry See More BloomTime:Spring A unique and easy-to-grow edible landscaping plant, the White mulberry is prized for its tasty fruits as well as its exquisite ornamental appeal. Originally native to China, this plant was valued for its role in silkContinue reading “Suggested Plants to Build a Garden That Blooms All the Year Round”

View More Articles

Add to My Garden

Silvervein creeper

Parthenocissus henryana

Silvervein creeper is a vigorous deciduous climber that is self-clinging and can attach to garden walls or trees. Its leaves are one of its most attractive qualities, as they have three to five leaflets with gorgeous silver veins running through them. The leaves have deep burgundy undersides and are sometimes flushed with purple.

Mid spring, Late spring, Summer, Fall

Planting Time

Care Guide for Silvervein creeper

Soil

Sunlight

Partial sun, Full sun, Full shade

Hardiness Zones

6 to 9

Planting Time

Mid spring, Late spring, Summer, Fall

Harvest Time

Late summer, Early fall, Mid fall

Know the light your plants really get.

Find the best spots for them to optimize their health, simply using your phone.

Download the App

Questions About Silvervein creeper

Watering

Pruning

Sunlight

Temperature

Fertilizing

What's the best method to water my Silvervein creeper?

What should I do if I water Silvervein creeper too much/too little?

How often should I water my Silvervein creeper?

How much water do I need to give my Silvervein creeper?

Should I adjust the watering frequency for my Silvervein creeper according to different seasons or climates?

What should I be careful with when I water my Silvervein creeper in different seasons, climates, or during different growing periods?

The age of the plants matter. Lack of water is one of the most common reasons the newly planted ones fail to grow. After they are established, you need to ease off the watering schedule.

Why is watering my Silvervein creeper important?

How can I prune my Silvervein creeper?

What should I do after pruning my Silvervein creeper?

How can I prune my Silvervein creeper during different seasons?

When should I prune my Silvervein creeper through different stages of growth?

How many hours of sunlight does Silvervein creeper need to grow?

What will happen if Silvervein creeper doesn’t get enough sunlight?

What will happen if Silvervein creeper gets too much sunlight?

What is the optimal temperature for Silvervein creeper?

Should I adjust the temperature for Silvervein creeper during different growing phases?

How can I keep Silvervein creeper warm in cold seasons?

What damage will Silvervein creeper suffer if the temperature is too high/low?

What tips and cautions should I keep in mind when it comes to temperature for Silvervein creeper?

How can I keep Silvervein creeper warm without a heat pad?

How can I provide Silvervein creeper with an adequate temperature condition?

How can I save Silvervein creeper from temperature damage?

Should I adjust the temperature for Silvervein creeper in different seasons?

Under what conditions should I stop adjusting the temperature for Silvervein creeper?

Why do I need to fertilize my Silvervein creeper?

When is the best time to fertilize my Silvervein creeper?

When should I avoid fertilizing my Silvervein creeper?

What type of fertilizer does my Silvervein creeper need?

How do I fertilize my Silvervein creeper?

What happens if I fertilize my Silvervein creeper too much?

Get tips and tricks for your plants.

Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.

Download the App

Common Pests & Diseases

Common issues for Silvervein creeper based on 10 million real cases

Caterpillars

Caterpillars are fleshy moth or butterfly larvae that come in an array of colors, patterns, and even hairstyles. They chew on leaves and flower petals, creating large, irregular holes.

Learn More

Sap-sucking insects

Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.

Learn More

Scars

Any light-colored markings that appear on stems but which do not enlarge or multiply are simply scars that have healed.

Learn More

Plant dried up

The entire plant may dry out due to dieback or normal seasonal dormancy.

Learn More

Treat and prevent plant diseases.

AI-powered plant doctor helps you diagnose plant problems in seconds.

Download the App

Distribution Map

Habitat

Moist rocks

Map

Native

Cultivated

Invasive

Potentially invasive

Exotic

No species reported

More Info

Plant Type

Vine

Flower Color

Green

Leaf Color

Green

White

Red

Scientific Classification

Phylum

Vascular plants

Class

Dicotyledons

Order

Vitales

Family

Grape

Genus

Parthenocissus

Species

Silvervein creeper

Find your perfect green friends.

Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.

Download the App