About
Care Guide
Care FAQ
Pests & Diseases
Distribution
More Info
Related Plants
Related Articles
Add to My Garden Queen's wreath
Petrea volubilis
Also known as: Nilmani
Queen's wreath (Petrea volubilis) is an evergreen flowering vine that is native to Central America and is grown in gardens around the world for its ornamental properties. In late spring and early summer, it produces star-like purple flowers. The scientific genus name honors Lord Robert James Petre, a 17th-century British horticulturist.
Every 1-2 weeks
Water
Care Guide for Queen's wreath
Soil
Sand, Clay, Acidic, Neutral, Alkaline
Sunlight
Full sun, Partial sun
Planting Time
Early spring
Harvest Time
Mid winter, Late winter, Early spring
Tips, advice, and instructions for over 13,000 species that you will find nowhere else
Scan QR code to download
Queen's wreath
Water
Every 1-2 weeks
Planting Time
Early spring
Harvest Time
Mid winter, Late winter, Early spring
Download and print this plant care card and attach it to your plants
Download
Queen's wreath
Water
Every 1-2 weeks
Planting Time
Early spring
Harvest Time
Mid winter, Late winter, Early spring
Download
Queen's wreath
Water
Every 1-2 weeks
Planting Time
Early spring
Harvest Time
Mid winter, Late winter, Early spring
Download
Questions About Queen's wreath
Watering 
Pruning How Much Do I Need to Water My Queen's wreath?
When it comes time to water your Queen's wreath, you may be surprised to find that this plant does not always need a high volume of water. Instead, if only a few inches of soil have dried since your last watering, you can support healthy growth in the Queen's wreath by giving it about five to ten ounces of water every time you water. You can also decide your water volume based on soil moisture. As mentioned above, you should note how many inches of soil have dried out between waterings. A surefire way to make sure your Queen's wreath gets the moisture it needs is to supply enough water to moisten all the soil layers that became dry since the last time you watered. If more than half of the soil has become dry, you should consider giving more water than usual. In those cases, continue adding water until you see excess water draining from your pot’s drainage holes.
If your Queen's wreath is planted in an area that gets plenty of rain outdoors, it may not need additional watering. When the Queen's wreath is young or just getting established, make sure it gets 1-2 inches of rain per week. As it continues to grow and establish, it can survive entirely on rainwater and only when the weather is hot and there is no rainfall at all for 2-3 weeks, then consider giving your Queen's wreath a full watering to prevent them from suffering stress.
If your Queen's wreath is planted in an area that gets plenty of rain outdoors, it may not need additional watering. When the Queen's wreath is young or just getting established, make sure it gets 1-2 inches of rain per week. As it continues to grow and establish, it can survive entirely on rainwater and only when the weather is hot and there is no rainfall at all for 2-3 weeks, then consider giving your Queen's wreath a full watering to prevent them from suffering stress.
Read More ![more]()
Free
How Often Should You Water Your Queen's wreath?
Most plants that grow naturally outdoors can be allowed to grow normally with rainfall. If your area lacks rainfall, consider giving your plants adequate watering every 2 weeks during the spring and fall. More frequent watering is needed in summer. In winter, when growth becomes slower and plants need less water, water more sparingly. Throughout the winter, you may not give it additional watering at all. If your Queen's wreath is young or newly planted, then you should water more frequently to help it establish, and mature and grow up to have more adaptable and drought tolerant plants.
For potted plants, there are two main ways that you can determine how often to water your Queen's wreath. The first way is to set a predetermined watering schedule. If you choose this route, you should plan to water this plant about once every week or once every other week. However, this approach may not always work as it does not consider the unique conditions of the growing environment for your Queen's wreath .
Your watering frequency can also change depending on the season. For instance, a predetermined watering schedule will likely not suffice during summer when this plant's water needs are highest. An alternative route is to set your watering frequency based on soil moisture. Typically, it is best to wait until the first two to four inches of soil, usually ⅓ to ½ depth of the pots, have dried out entirely before you give more water.
For potted plants, there are two main ways that you can determine how often to water your Queen's wreath. The first way is to set a predetermined watering schedule. If you choose this route, you should plan to water this plant about once every week or once every other week. However, this approach may not always work as it does not consider the unique conditions of the growing environment for your Queen's wreath .
Your watering frequency can also change depending on the season. For instance, a predetermined watering schedule will likely not suffice during summer when this plant's water needs are highest. An alternative route is to set your watering frequency based on soil moisture. Typically, it is best to wait until the first two to four inches of soil, usually ⅓ to ½ depth of the pots, have dried out entirely before you give more water.
Read More ![more]()
Free
How to Know If You Are Watering Queen's wreath Enough?
Overwatering is a far more common problem for the Queen's wreath, and there are several signs you should look for when this occurs. Generally, an overwatered Queen's wreath will have yellowing leaves and may even drop some leaves. Also, overwatering can cause the overall structure of your plant to shrivel and may also promote root rot. On the other hand, an underwatered Queen's wreath will also begin to wilt. It may also display leaves that are brown or brittle to the touch. Whether you see signs of overwatering or underwatering, you should be prepared to intervene and restore the health of your Queen's wreath.
Read More ![more]()
Free
How to Water the Queen's wreath at Different Growth Stages?
When the Queen's wreath is very young, such as when it is in a seedling stage, you will need to give it more water than you would if it were at a mature age. During the early stages of this plant’s life, it is important to keep the soil consistently moist to encourage root development. The same is true for any Queen's wreath that you have transplanted to a new growing location. Also, the Queen's wreath can develop showy flowers and fruits when you give them the correct care. If your Queen's wreath is in a flowering or fruiting phase, you will likely need to give a bit more water than you usually would to support these plant structures.
Read More ![more]()
How to Water the Queen's wreath Through the Seasons?
The seasonal changes will affect how often you water your Queen's wreath. Mainly, during the hottest summer months, you will likely need to increase how much you water this plant, especially if it grows in an area that receives ample sunlight. Strong summer sunlight can cause soil to dry out much faster than usual, meaning that you’ll need to water more frequently. By contrast, your Queen's wreath will need much less water during the winter, as it will not be in an active growing phase. During winter, you can get by with watering once every 2 to 3 weeks or sometimes not at all. For those growing this plant indoors, you should be somewhat wary of appliances such as air conditioners, which can cause your plant to dry out more quickly, which also calls for more frequent watering.
Read More ![more]()
What Is the Difference between Watering Queen's wreath Indoors Vs. Outdoors?
In some cases, your Queen's wreath may not need any supplemental watering when it grows outside and will survive on rainwater alone. However, if you live in an area of little to no rain, you should water this plant about every two weeks. If you belong to the group of people who live out of this plant's natural hardiness zone, you should grow it indoors. In an indoor setting, you should monitor your plant's soil as it can dry out more quickly when it is in a container or when it is exposed to HVAC units such as air conditioners. Those drying factors will lead you to water this plant a bit more often than if you grew it outdoors.
Read More ![more]()
What Is the Best Way to Water the Queen's wreath?
Your Queen's wreath will not be too picky about how you choose to water it. As such, you can use just about any common watering tool to moisten this plant’s soil. Watering cans, hoses, and even cups will work just fine when it is time to water your Queen's wreath. Regardless of which watering tool you use, you should typically apply the water directly to the soil. In doing so, you should ensure that you moisten all soil areas equally to give all parts of the root system the water it needs. It can help to use filtered water, as tap water can contain particles that are harmful to plants. It is also beneficial to use water that is at or slightly above room temperature, as colder or hotter water can be somewhat shocking to the Queen's wreath. However, the Queen's wreath usually responds well to any kind of water you give it.
Read More ![more]()
What to Do If Your Water Queen's wreath Too Much or Too Little?
For outdoor plants, especially newly planted plants or plant seedlings, they can be prone to lack of watering. Remember that you need to keep watering enough for a few months when the tree is small or just planted. This is because once the roots are established, Queen's wreath can rely on rain most of the time.
When your Queen's wreath is planted in pots, overwatering is often more likely to.When you accidentally overwater your Queen's wreath, you should be prepared to remedy the situation immediately. First, you should stop watering your plant right away to minimize the effect of your overwatering. After, you should consider removing your Queen's wreath from its pot to inspect its roots. If you find that none of the roots have developed root rot, it may be permissible to return your plant to its container. If you do discover signs of root rot, then you should trim away any roots that have been affected. You may also want to apply a fungicide to prevent further damage. Lastly, you should repot your Queen's wreath in soil that is well-draining. In the case of an underwatered Queen's wreath, simply water this plant more frequently.
Underwatering is often an easy fix. If you underwater, the plant's leaves will tend to droop and dry out and fall off, and the leaves will quickly return to fullness after sufficient watering. Please correct your watering frequency as soon as underwatering occurs.
When your Queen's wreath is planted in pots, overwatering is often more likely to.When you accidentally overwater your Queen's wreath, you should be prepared to remedy the situation immediately. First, you should stop watering your plant right away to minimize the effect of your overwatering. After, you should consider removing your Queen's wreath from its pot to inspect its roots. If you find that none of the roots have developed root rot, it may be permissible to return your plant to its container. If you do discover signs of root rot, then you should trim away any roots that have been affected. You may also want to apply a fungicide to prevent further damage. Lastly, you should repot your Queen's wreath in soil that is well-draining. In the case of an underwatered Queen's wreath, simply water this plant more frequently.
Underwatering is often an easy fix. If you underwater, the plant's leaves will tend to droop and dry out and fall off, and the leaves will quickly return to fullness after sufficient watering. Please correct your watering frequency as soon as underwatering occurs.
Read More ![more]()
You’ve got questions. We’ve got answers.
Let us help take all the guesswork out of your gardening.
More Questions People Also Ask
Common Pests & Diseases
Common issues for Queen's wreath based on 10 million real cases
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Underwatering
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Solutions: Your plant is very thirsty and needs water promptly. You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot. If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Solutions: If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible. For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface. In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well. If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Keep your leafy friends healthy and happy.
Diagnose your plant, and learn how to prevent and treat plant diseases.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Show More
Become a premium member and read all about it!
Learn how to prevent and treat plant diseases.
Learn how to prevent and treat plant diseases.
Underwatering
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Symptom Analysis
Your plant’s leaves are turning yellow due to underwatering, the oldest leaves turn yellow first. Leaves yellow from the edges towards the middle. Other signs of underwatering include the soil feeling very dry or pulling away from the edge of its pot.
Solutions
Your plant is very thirsty and needs water promptly.
- You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot.
- If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Prevention
- When you get a new plant, research its specific watering needs. Set reminders so that you remember to water your plants consistently. Not all plants are the same, so make sure to differentiate all of your plants in your watering schedule.
- You may wish to purchase a commercial soil water meter which has a long probe that you place near your plant’s roots. Be sure to check it frequently and water your plant when the soil water meter indicates that it needs watering.
Show More
Become a premium member and read all about it!
Learn how to prevent and treat plant diseases.
Learn how to prevent and treat plant diseases.
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Overview
Flower withering occurs when flowers become weak, droopy, wilted, or faded until they can’t be revived. During withering, they begin to wrinkle and shrink until the flower becomes completely dry or dead.
Any flowers, regardless of the plant type or the climate they are grown in, are susceptible to withering. It is a worldwide problem across houseplants, herbs, flowering ornamentals, trees, shrubs, garden vegetables, and food crops.
Unlike wilting—which withering is often confused with—withering can be caused by different things and is often due to more than a lack of water. Withering can be fatal in severe cases.
Symptom Analysis
Flower withering progresses from very mild cases to severe occurrences that kill the flower. The severity of the symptoms is related to the cause and how long the condition is allowed to progress before action is taken.
- Wilted, droopy flowers
- Petals and leaves begin to wrinkle
- Brown papery streaks or spots appear on the petals and leaf tips
- Flowerhead shrink in size
- Petal color fades
- Yellowing leaves
- Complete death of the flower
Disease Cause
The main causes of flower withering include natural age progress, lack of water, nutritional deficiencies, and bacterial or fungal diseases. It’s critical to determine the underlying cause when flower withering is noticed. This will guide the best course of action, if treatment is possible.
Check the soil for moisture and then closely examine the entire plant for signs of nutrient deficiencies. If neither of those appears to be the cause then cut open the stem below a flower. If a cross-section reveals brown or rust-colored stains it is safe to assume that this is a bacterial or fungal infection.
If the flower is nearing the end of its normal lifespan, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence, or cell aging and death. Cell division stops and the plant begins breaking down resources within the flower to use in other parts of the plant.
In all other cases, flower withering happens when the plant seals off the stem as a defense mechanism, stopping transport within the vascular system. This prevents further water loss through the flowers but also stops bacteria and fungi from moving to healthy parts of the plant. Once water and nutrient transport stops, the flower begins to wither and ultimately die.
Solutions
If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface.
In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well.
If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Prevention
This is definitely one of those instances where prevention is more effective than cure. Here are some preventative measures for avoiding premature flower withering.
- Water plants according to their needs -- either keep the soil slightly moist or allow the top inch or two to dry out before watering again.
- Fertilize lightly on a consistent basis, depending upon the plant’s growth. Quick-growing plants and those that flower or develop fruit will need more frequent fertilizing than slow-growing plants.
- Purchase plants that are certified disease- or pathogen-free.
- Look for disease-resistant cultivars.
- Isolate plants showing disease symptoms to prevent the spread to neighboring plants.
- Practice good plant hygiene by removing any fallen plant material as soon as possible.
Show More
Become a premium member and read all about it!
Learn how to prevent and treat plant diseases.
Learn how to prevent and treat plant diseases.
Distribution Map
Habitat
Rivers, streams
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info
Plant Type
Vine, Shrub
Bloom Time
All year around
Leaf Color
Green
Scientific Classification
Related Plants
Princess flower
The princess flower is native to Brazil and grows best in sunny areas. It has a wide reach when growing, and can be trained to "climb" up trellises or other upright structures. Its leaves are hairy to the touch.
Bloom Time
Summer, autumn
Blackboard tree
Blackboard tree (Alstonia scholaris) is a perennial evergreen tree that can grow to 40 m tall. It is a tropical tree with fragrant clusters of showy white flowers that bloom in fall. The perfume-like scent of the blossoms is more obvious during the evenings. Most often planted as a street tree. Another common name for this tree is Devil’s tree.
Bloom Time
Spring, Summer
Asian virginsbower
The asian virginsbower is one species of garden clematis that has generated some incredible beautiful varieties. It is a deciduous vine that produces creamy white to purple flowers according to varieties and blooms in early summer on shoots that developed from the previous year's growth.
Bloom Time
Summer
Garden Usage
Plants of the genus Clematis are often planted in the garden and can also be grown as potted plants. There are a few tips needed to care for them. Most common asian virginsbower are vines and can be used to create flowering walls or decorative arches, as well as being planted alongside trees, shrubs, etc.
Common jasmine
Common jasmine (Jasminum officinale) is a deciduous plant species that flowers in summer. Common jasmine flowers have a strong fragrance. This species is native to the Caucasus, northern Iran, Afghanistan, Pakistan, and the Himalayas.
Bloom Time
Spring, summer
Garden Usage
Shrubs and vines in the genus Jasminum are famous for their attractive, pale, star-shaped blooms of flowers, distinctive fragrance, and oil. Despite their delicate appearance, they are not difficult to maintain. They tolerate different temperature ranges, but prefer slightly drier soils in combination with a warm, humid environment. However, given the large number of different varieties, it is important to tailor conditions to the variety you choose.
Peace lily
Peace lily (Spathiphyllum cochlearispathum) is a plant species that is native to southern Mexico. Peace lily is commonly cultivated as an ornamental houseplant. This species should not be grown in direct sunlight.
Bloom Time
Spring, summer
Garden Usage
Spathiphyllum spp. are popular indoor, ornamental plants. They are easy to care for and can grow well with little sunlight. With proper care, they can bloom twice a year for two months or longer. The plant's spathe is mostly white, or light green for a few varieties. Its leaves are elliptic and have dark green, bright surfaces.
Spider plant
The spider plant is a green perennial plant with long, thin leaves that earn it another name, "ribbon plant." It has spread far from its native Africa because it is easy to care for. Since spider plants grow well in partial or full shade, they have become popular houseplants.
Bloom Time
Summer
Garden Usage
Spider plant is a common ornamental potted plant with good adaptability and simple maintenance. The leaves are green in all seasons. The flowers are white and elegant, showing between spring and summer.
View More Plants ![more]()
Related Articles
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow Orange daylily See More The Orange daylily is a perennial plant known for its captivating lily-like blooms. Its natural habitats are meadows and forests, but it is also a common garden plant in temperate regions around the world. Each individual flower lasts only a day, but the plantContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Suggested Plants to Build a Garden That Blooms All the Year Round
Plant Collection Suggested Plants to Build a Garden That Blooms All the Year Round Bearded iris See More BloomTime:Spring The Bearded iris is a flowering plant that appears in many different colors. It is a popular garden plant because it’s easy to grow. Though their native lands are in Europe, Bearded irises are often grownContinue reading “Suggested Plants to Build a Garden That Blooms All the Year Round”
Read More ![more]()
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow China rose See More The China rose (Rosa chinensis) is a Southwest China native. The plant has been cultivated for so long that it has become hard to tell the difference between wild and cultivated varieties. With medium-sized clusters of flowers and a long blooming season, it isContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Suggested Plants to Build a Garden That Blooms All the Year Round
Plant Collection Suggested Plants to Build a Garden That Blooms All the Year Round White mulberry See More BloomTime:Spring A unique and easy-to-grow edible landscaping plant, the White mulberry is prized for its tasty fruits as well as its exquisite ornamental appeal. Originally native to China, this plant was valued for its role in silkContinue reading “Suggested Plants to Build a Garden That Blooms All the Year Round”
Read More ![more]()
View More Articles ![more]()
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Premium membership for No 1 mobile plant app 'PictureThis'
Continue reading all contents with a PictureThis membership
No need to pay if you cancel the subscription at least a day before the 7-day free trial ends
Sorry, the website is being upgraded and does not support purchases at the moment.
Please login first
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
About
Care Guide
Care FAQ
Pests & Diseases
Distribution
More Info
Related Plants
Related Articles
Add to My Garden Queen's wreath
Petrea volubilis
Also known as: Nilmani
Every 1-2 weeks
Water
Care Guide for Queen's wreath
Soil
Sand, Clay, Acidic, Neutral, Alkaline
Sunlight
Full sun, Partial sun
Planting Time
Early spring
Harvest Time
Mid winter, Late winter, Early spring
Tips, advice, and instructions for over 13,000 species that you will find nowhere else
Queen's wreath
Petrea volubilis
Water
Every 1-2 weeks
Planting Time
Early spring
Harvest Time
Mid winter, Late winter, Early spring
Download
Questions About Queen's wreath
Watering Pruning How Much Do I Need to Water My Queen's wreath?
Free
How Often Should You Water Your Queen's wreath?
Free
How to Know If You Are Watering Queen's wreath Enough?
Free
How to Water the Queen's wreath at Different Growth Stages?
How to Water the Queen's wreath Through the Seasons?
Show More ![more]()
You’ve got questions. We’ve got answers.
Let us help take all the guesswork out of your gardening.
More Questions People Also Ask
Common Pests & Diseases
Common issues for Queen's wreath based on 10 million real cases
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More ![more]()
Underwatering
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Solutions: Your plant is very thirsty and needs water promptly. You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot. If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Learn More ![more]()
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Solutions: If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible. For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface. In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well. If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Learn More ![more]()
Keep your leafy friends healthy and happy.
Diagnose your plant, and learn how to prevent and treat plant diseases.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Show More
Become a premium member and read all about it!
Learn how to prevent and treat plant diseases.
Learn how to prevent and treat plant diseases.
Underwatering
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Symptom Analysis
Your plant’s leaves are turning yellow due to underwatering, the oldest leaves turn yellow first. Leaves yellow from the edges towards the middle. Other signs of underwatering include the soil feeling very dry or pulling away from the edge of its pot.
Solutions
Your plant is very thirsty and needs water promptly.
- You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot.
- If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Prevention
- When you get a new plant, research its specific watering needs. Set reminders so that you remember to water your plants consistently. Not all plants are the same, so make sure to differentiate all of your plants in your watering schedule.
- You may wish to purchase a commercial soil water meter which has a long probe that you place near your plant’s roots. Be sure to check it frequently and water your plant when the soil water meter indicates that it needs watering.
Show More
Become a premium member and read all about it!
Learn how to prevent and treat plant diseases.
Learn how to prevent and treat plant diseases.
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Overview
Flower withering occurs when flowers become weak, droopy, wilted, or faded until they can’t be revived. During withering, they begin to wrinkle and shrink until the flower becomes completely dry or dead.
Any flowers, regardless of the plant type or the climate they are grown in, are susceptible to withering. It is a worldwide problem across houseplants, herbs, flowering ornamentals, trees, shrubs, garden vegetables, and food crops.
Unlike wilting—which withering is often confused with—withering can be caused by different things and is often due to more than a lack of water. Withering can be fatal in severe cases.
Symptom Analysis
Flower withering progresses from very mild cases to severe occurrences that kill the flower. The severity of the symptoms is related to the cause and how long the condition is allowed to progress before action is taken.
- Wilted, droopy flowers
- Petals and leaves begin to wrinkle
- Brown papery streaks or spots appear on the petals and leaf tips
- Flowerhead shrink in size
- Petal color fades
- Yellowing leaves
- Complete death of the flower
Disease Cause
The main causes of flower withering include natural age progress, lack of water, nutritional deficiencies, and bacterial or fungal diseases. It’s critical to determine the underlying cause when flower withering is noticed. This will guide the best course of action, if treatment is possible.
Check the soil for moisture and then closely examine the entire plant for signs of nutrient deficiencies. If neither of those appears to be the cause then cut open the stem below a flower. If a cross-section reveals brown or rust-colored stains it is safe to assume that this is a bacterial or fungal infection.
If the flower is nearing the end of its normal lifespan, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence, or cell aging and death. Cell division stops and the plant begins breaking down resources within the flower to use in other parts of the plant.
In all other cases, flower withering happens when the plant seals off the stem as a defense mechanism, stopping transport within the vascular system. This prevents further water loss through the flowers but also stops bacteria and fungi from moving to healthy parts of the plant. Once water and nutrient transport stops, the flower begins to wither and ultimately die.
Solutions
If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface.
In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well.
If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Prevention
This is definitely one of those instances where prevention is more effective than cure. Here are some preventative measures for avoiding premature flower withering.
- Water plants according to their needs -- either keep the soil slightly moist or allow the top inch or two to dry out before watering again.
- Fertilize lightly on a consistent basis, depending upon the plant’s growth. Quick-growing plants and those that flower or develop fruit will need more frequent fertilizing than slow-growing plants.
- Purchase plants that are certified disease- or pathogen-free.
- Look for disease-resistant cultivars.
- Isolate plants showing disease symptoms to prevent the spread to neighboring plants.
- Practice good plant hygiene by removing any fallen plant material as soon as possible.
Show More
Become a premium member and read all about it!
Learn how to prevent and treat plant diseases.
Learn how to prevent and treat plant diseases.
Distribution Map
Habitat
Rivers, streams
Map
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info
Plant Type
Vine, Shrub
Bloom Time
All year around
Leaf Color
Green
Scientific Classification
Related Plants
Related Articles
Best Perennial Plant to Grow
# Useful Tips
Suggested Plants to Build a Garden That Blooms All the Year Round
# Useful Tips
Best Perennial Plant to Grow
# Useful Tips
Suggested Plants to Build a Garden That Blooms All the Year Round
# Useful Tips
Discover more articles?
Read More 
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Premium membership for No 1 mobile plant app 'PictureThis'
Continue reading all contents with a PictureThis membership
No need to pay if you cancel the subscription at least a day before the 7-day free trial ends
Sorry, the website is being upgraded and does not support purchases at the moment.
Sign in/sign up
Sign in with Apple
Sign in with Google
