Until recently, pale corydalis was known as Corydalis ochroleuca or sempervirens (white or pale corydalis). Despite the confusion over its exact genus, there is no doubt that this is a beautiful little plant. It has elegant, elongated white flower petals and lacy green-blue leaves. As a result, it is popular in flower gardens as long as it is not exposed to too much sun.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Common Pests & Diseases About Pale corydalis
Feedback
Common issues for Pale corydalis based on 10 million real cases
Underwatering
Leaves may wilt for a variety of reasons.
Solutions: The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with. Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock. In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Solutions: The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method. Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly. Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems. Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species. Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil. Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Underwatering
Leaves may wilt for a variety of reasons.
Overview
Underwatering plants is one of the quickest ways to kill them. This is something that most gardeners are well aware of. Unfortunately, knowing exactly how much water a plant needs can be tricky, especially considering that underwatering and overwatering present similar symptoms in plants.
Therefore, it’s important to be vigilant and attentive to each plants’ individual needs.
Symptom Analysis
As mentioned earlier, overwatering and underwatering present similar symptoms in plants. These symptoms include poor growth, wilted leaves, defoliation, and brown leaf tips or margins. Ultimately, both underwatering and overwatering can lead to the death of a plant.
The easiest way to determine whether a plant has too much water or too little is to look at the leaves. If underwatering is the culprit, the leaves will look brown and crunchy, while if it’s overwatering, they will appear yellow or a pale green in color.
When this issue first begins, there may be no noticeable symptoms at all, particularly in hardy or drought-tolerant plants. However, they will begin to wilt once they start suffering from a lack of water. The edges of the plant’s leaves will become brown or curled. Soil pulling away from the edges of the planter is a telltale sign, or a crispy, brittle stem.
Prolonged underwatering can cause a plant’s growth to become stunted. The leaves might drop and the plant can be more susceptible to pest infestations, too.
Disease Cause
Underwatering is caused by, quite simply, not watering plants often or deeply enough. There is a heightened risk of underwatering if any of these situations apply:
Extreme heat and dry weather (when growing outdoors)
Grow lights or indoor lighting that is too bright or intense for the type of plant
Using fast-draining growing media such as sand
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
Placement is often random and scattered as diseases are spread through raindrops.
May appear on lower leaves and the interior of the plant where humidity is higher.
Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
Leaf margins may turn yellow.
Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
Blotches grow in size until the entire leaf is brown.
The leaf falls off the plant.
Severe Symptoms
Partial or complete premature defoliation
Reduced growth
Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Symptom Analysis
Your plant has dried out and turned brown. It might be starting to wilt, with no noticeable green around the stems and leaves. Touch the leaves, and they may crinkle under your fingers.
Possible causes of a dried out plant include:
Not enough water. A lack of water will lead to dry plant tissue.
Too much water. Watering too much can lead to root rot which makes the plant struggle to take up water. Rotted, mushy roots are a sign of overeating.
Entering dormancy. As perennial plants enter their resting period known as dormancy, their leaves dry out and may fall off. This happens during decreasing day length.
Exposure to herbicides and other toxic substances. If a plant is hit with a large dose herbicide or other toxic chemical, the plant will turn brown.
Too much fertility. An excess of fertilizer can prevent plants from taking up water, leading to drying.
Improper sun exposure. Just like humans, plants can get sunburn by intense, direct light. Plants can also dry out if they don’t receive enough light.
To determine whether the plant is still alive and can be saved, you can:
Bend a stem. If the stem is pliable, the plant is still alive. If the stem breaks, the plant is dead.
Gently scratch the stem with your fingernail for signs of green inside. If your plant is dead, the stem will be brittle and brown throughout.
Cut the stems back a little bit a time for visible green growth. If none of the stems have visible green growth, the plant is dead.
Solutions
The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method.
Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly.
Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems.
Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species.
Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil.
Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Prevention
Prevention involves providing your plant with the proper environment.
Provide the proper amount of water. The amount of water depends on a plant’s size, species, and environment. A general rule is to allow soil to dry out between waterings.
Place plants in the proper environment. Provide the proper hours of sun and temperature for your individual plant.
Provide proper fertility. Most plants only need to be fertilized once or twice a year; don’t overapply.
Keep plants free from toxic substances. Keep herbicides and toxic household chemicals away from your plants.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
About
Care Guide
More Info
Pests & Diseases
Pale corydalis
Pseudofumaria alba
Until recently, pale corydalis was known as Corydalis ochroleuca or sempervirens (white or pale corydalis). Despite the confusion over its exact genus, there is no doubt that this is a beautiful little plant. It has elegant, elongated white flower petals and lacy green-blue leaves. As a result, it is popular in flower gardens as long as it is not exposed to too much sun.
Instantly identify plants with a snap
Snap a photo for instant plant ID, gaining quick insights on disease prevention, treatment, toxicity, care, uses, and symbolism, etc.
Plant care made easier than ever with our tailor-made smart care reminder.
Download the App for Free
Common Pests & Diseases About Pale corydalis
Feedback
Common issues for Pale corydalis based on 10 million real cases
Underwatering
Leaves may wilt for a variety of reasons.
Solutions: The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with. Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock. In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Learn More About the Underwatering
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More About the Brown spot
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Solutions: The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method. Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly. Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems. Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species. Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil. Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Learn More About the Plant dried up
Underwatering
Leaves may wilt for a variety of reasons.
Overview
Underwatering plants is one of the quickest ways to kill them. This is something that most gardeners are well aware of. Unfortunately, knowing exactly how much water a plant needs can be tricky, especially considering that underwatering and overwatering present similar symptoms in plants.
Therefore, it’s important to be vigilant and attentive to each plants’ individual needs.
Symptom Analysis
As mentioned earlier, overwatering and underwatering present similar symptoms in plants. These symptoms include poor growth, wilted leaves, defoliation, and brown leaf tips or margins. Ultimately, both underwatering and overwatering can lead to the death of a plant.
The easiest way to determine whether a plant has too much water or too little is to look at the leaves. If underwatering is the culprit, the leaves will look brown and crunchy, while if it’s overwatering, they will appear yellow or a pale green in color.
When this issue first begins, there may be no noticeable symptoms at all, particularly in hardy or drought-tolerant plants. However, they will begin to wilt once they start suffering from a lack of water. The edges of the plant’s leaves will become brown or curled. Soil pulling away from the edges of the planter is a telltale sign, or a crispy, brittle stem.
Prolonged underwatering can cause a plant’s growth to become stunted. The leaves might drop and the plant can be more susceptible to pest infestations, too.
Disease Cause
Underwatering is caused by, quite simply, not watering plants often or deeply enough. There is a heightened risk of underwatering if any of these situations apply:
Extreme heat and dry weather (when growing outdoors)
Grow lights or indoor lighting that is too bright or intense for the type of plant
Using fast-draining growing media such as sand
Solutions
The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with.
Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock.
In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Prevention
Always check the soil before watering. If the top inch of soil feels moist, though not wet, the watering is perfect. If it’s dry, water it immediately. If it feels soggy, you avoid watering until it dries out a bit more.
Also, make sure the lighting is sufficient for the species. Plants grow faster and need more water when there is intense light or lots of heat. Being aware of these conditions and modifying them, if possible, is a good way to prevent underwatering. Many container plants are potted in soil mixtures mean to be well-draining. Adding materials that retain moisture, like compost or peat moss, can also prevent these symptoms.
Other tips to prevent underwatering include:
Choose pots with adequately-sized drainage holes
Avoid warm temperatures
Use large pots with additional soil (these take longer to dry out)
Avoid terracotta pots, which lose water quickly
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
Placement is often random and scattered as diseases are spread through raindrops.
May appear on lower leaves and the interior of the plant where humidity is higher.
Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
Leaf margins may turn yellow.
Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
Blotches grow in size until the entire leaf is brown.
The leaf falls off the plant.
Severe Symptoms
Partial or complete premature defoliation
Reduced growth
Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
Maintain good air movement between plants through proper plant spacing.
Increase air circulation through the center of plants through pruning.
Thoroughly clean all pruning tools after working with diseased plants.
Never dispose of disease plant material in a compost pile.
Avoid overhead watering to keep moisture off of the foliage.
Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Symptom Analysis
Your plant has dried out and turned brown. It might be starting to wilt, with no noticeable green around the stems and leaves. Touch the leaves, and they may crinkle under your fingers.
Possible causes of a dried out plant include:
Not enough water. A lack of water will lead to dry plant tissue.
Too much water. Watering too much can lead to root rot which makes the plant struggle to take up water. Rotted, mushy roots are a sign of overeating.
Entering dormancy. As perennial plants enter their resting period known as dormancy, their leaves dry out and may fall off. This happens during decreasing day length.
Exposure to herbicides and other toxic substances. If a plant is hit with a large dose herbicide or other toxic chemical, the plant will turn brown.
Too much fertility. An excess of fertilizer can prevent plants from taking up water, leading to drying.
Improper sun exposure. Just like humans, plants can get sunburn by intense, direct light. Plants can also dry out if they don’t receive enough light.
To determine whether the plant is still alive and can be saved, you can:
Bend a stem. If the stem is pliable, the plant is still alive. If the stem breaks, the plant is dead.
Gently scratch the stem with your fingernail for signs of green inside. If your plant is dead, the stem will be brittle and brown throughout.
Cut the stems back a little bit a time for visible green growth. If none of the stems have visible green growth, the plant is dead.
Solutions
The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method.
Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly.
Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems.
Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species.
Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil.
Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Prevention
Prevention involves providing your plant with the proper environment.
Provide the proper amount of water. The amount of water depends on a plant’s size, species, and environment. A general rule is to allow soil to dry out between waterings.
Place plants in the proper environment. Provide the proper hours of sun and temperature for your individual plant.
Provide proper fertility. Most plants only need to be fertilized once or twice a year; don’t overapply.
Keep plants free from toxic substances. Keep herbicides and toxic household chemicals away from your plants.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App for Free
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Cookie Management Tool
In addition to managing cookies through your browser or device, you can change your cookie settings below.
Necessary Cookies
Necessary cookies enable core functionality. The website cannot function properly without these cookies, and can only be disabled by changing your browser preferences.
Analytical Cookies
Analytical cookies help us to improve our application/website by collecting and reporting information on its usage.
Cookie Name
Source
Purpose
Lifespan
_ga
Google Analytics
These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here.
1 Year
_pta
PictureThis Analytics
We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience.
1 Year
Cookie Name
_ga
Source
Google Analytics
Purpose
These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here.
Lifespan
1 Year
Cookie Name
_pta
Source
PictureThis Analytics
Purpose
We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience.
Lifespan
1 Year
Marketing Cookies
Marketing cookies are used by advertising companies to serve ads that are relevant to your interests.
Cookie Name
Source
Purpose
Lifespan
_fbp
Facebook Pixel
A conversion pixel tracking that we use for retargeting campaigns. Learn more here.
1 Year
_adj
Adjust
This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here.
1 Year
Cookie Name
_fbp
Source
Facebook Pixel
Purpose
A conversion pixel tracking that we use for retargeting campaigns. Learn more here.
Lifespan
1 Year
Cookie Name
_adj
Source
Adjust
Purpose
This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here.