Gloxinia (Sinningia speciosa) Flower, Leaf, Care, Uses

Average water needs, watering when the top 3 cm of soil has dried out.

Fertilization

Fertilization once every 2-3 months during the growing season.

Pruning

Trim the diseased, withered leaves once a month.

Soil

Sand, Acidic, Neutral

Potting Suggestions

Mints plantains olives and allies

Needs excellent drainage in pots.

Know the light your plants really get.

Find the best spots for them to optimize their health, simply using your phone.

Download the App

A Botanist in Your Pocket

Scan QR code to download

Gloxinia

Sunlight

Partial sun

Hardiness Zones

11 to 12

Planting Time

Spring, Summer, Fall

Download and print this plant care card and attach it to your plants

Download

Questions About Gloxinia

Watering

Pruning

Sunlight

Temperature

Fertilizing

What is the best way to water my Gloxinia?

When watering the Gloxinia, you should aim to use filtered water that is at room temperature. Filtered water is better for this plant, as tap water can contain particles that are harmful to its health. The reason that the water should be at room temperature or slightly warmer is that the Gloxinia comes from a warm environment, and cold water can be somewhat of a shock to its system. Also, you should avoid overhead watering for this plant, as it can cause foliage complications. Instead, simply apply your filtered room temperature water to the soil until the soil is entirely soaked. Soaking the soil can be very beneficial for this plant as it moistens the roots and helps them continue to spread through the soil and collect the nutrients they need.

What should I do if I water my Gloxinia too much or too little?

Both overwatering and underwatering will be detrimental to the health of your Gloxinia, but overwatering is a far more common issue. When this species receives too much water, its stems and leaves may begin to wilt and turn from green to yellow. Overwatering over a prolonged period may also lead to diseases such as root rot, mold, and mildew, all of which can kill your plant. Underwatering is far less common for the Gloxinia, as this plant has decent drought tolerance. However, underwatering remains a possibility, and when it occurs, you can expect to find that the leaves of your Gloxinia have become brittle and brown.

It is crucial that you notice the signs of overwatering as soon as possible when caring for your Gloxinia. Some of the diseases that arise from overwatering, such as root rot, may not be correctable if you wait too long. If you see early signs of overwatering, you should reduce your watering schedule immediately. You may also want to assess the quality of soil in which your Gloxinia grows. If you find that the soil drains very poorly, you should replace it immediately with a loose, well-draining potting mix. On the other hand, if you find signs that your Gloxinia is receiving too little water, all you need to do is water more regularly until those signs have subsided.

How often should I water my Gloxinia?

If your plant is in a pot. The most precise way to decide whether your Gloxinia needs water is to plunge your finger into the soil. If you notice that the first two to three inches of soil have become dry, it is time to add some water.

If you grow your Gloxinia outdoors in the ground, you can use a similar method to test the soil. Again, when you find that the first few inches of soil have dried out, it is time to add water. During the spring and early fall, this method will often lead you to water this plant about once every week. When extremely hot weather arrives, you may need to increase your watering frequency to about twice or more per week. With that said, mature, well-established the Gloxinia can show an admirable ability to withstand drought.

How much water does my Gloxinia need?

When it comes time to water your Gloxinia, you should not be shy about how much water you give. With the first two to three inches of soil dry, this plant will appreciate a long and thorough watering. Supply enough water to soak the soil entirely. The amount of water you add should be enough to cause excess water to flow through the drainage holes at the bottom of your pot. If you don’t see excess water draining from the pot, you have likely underwatered your plant. But do not let the water accumulate inside the soil, which will be very dangerous to the plant as well. Alternatively, a lack of water draining through the pot could indicate poorly draining soils, which is detrimental to the health of this plant and should be avoided. If the plant is outside, 1 inch of rain per week will be sufficient.

How should I water my Gloxinia at different growth stages?

The water needs of the Gloxinia can change depending on growth stages as well. For example, when your Gloxinia is in the first few years of its life, or if you have just transplanted it to a new growing location, you will need to give more water than usual. During both of those stages, your Gloxinia will put a lot of energy towards sprouting new roots that will then support future growth. For those roots to perform their best, they need a bit more moisture than they would at a more mature phase. After a few seasons, your Gloxinia will need much less water. Another growth stage in which this plant may need more water is during the bloom period. Flower development can make use of a significant amount of moisture, which is why you might need to give your Gloxinia more water at this time.

How should I water my Gloxinia through the seasons?

The Gloxinia will have its highest water needs during the hottest months of the year. During the height of summer, you may need to give this plant water more than once per week, depending on how fast the soil dries out. The opposite is true during the winter. In winter, your plant will enter a dormant phase, in which it will need far less water than usual. In fact, you may not need to water this plant at all during the winter months. However, if you do water during winter, you should not do so more than about once per month. Watering too much at this time will make it more likely that your Gloxinia will contract a disease.

What's the difference between watering my Gloxinia indoors and outdoors?

It is most common to grow the Gloxinia indoors for any gardener that does not live in temperate and tropical regions. Those gardeners should consider the fact that soil in a container can dry out a bit faster than ground soil. Also, the presence of drying elements such as air conditioning units can cause your Gloxinia to need water on a more frequent basis as well. if you planted it outside. When that is the case, it’s likely you won’t need to water your Gloxinia very much at all. If you receive rainfall on a regular basis, that may be enough to keep your plant alive. Alternatively, those who grow this plant inside will need to water it more often, as allowing rainwater to soak the soil will not be an option.

Do I need to prune my Gloxinia?

Far from damaging the plant, regular pruning will actually encourage Gloxinia to produce more blooms. There are two primary forms of pruning for Gloxinia. The first is deadheading, which is the gardening term for removing spent flower heads once they start to wither. This concentrates the nutrients for the other flowers and allows the plant to flower better. The final process for pruning Gloxinia is the removal of yellow and diseased leaves, which increases plant ventilation and light penetration and facilitates plant growth. When nature runs its course, Gloxinia will bloom once, produce seed heads, and attempt to reproduce for the rest of the year. But, by consistently removing flower heads before they go to seed, you encourage the plant to continue producing more blooms for a longer flowering time. When the plant starts to wilt during the full, you should cut off the wilted part above the soil as well.

When is the best time to prune my Gloxinia?

There are two primary forms of pruning for Gloxinia. The first is deadheading, which is the gardening term for removing spent flower heads once they start to wither. This concentrates the nutrients for the other flowers and allows the plant to flower better. The final process for pruning Gloxinia is the removal of yellow and diseased leaves, which increases plant ventilation and light penetration and facilitates plant growth. Since Gloxinia requires two types of pruning, you’ll be trimming your plants throughout the growing season. Pinching is most effective in the early spring before the plant develops any flower buds. Removal of yellowing or diseased leaves can be done at any time during the growing season. When nature runs its course, Gloxinia will bloom once, produce seed heads, and attempt to reproduce for the rest of the year. But, by consistently removing flower heads before they go to seed, you encourage the plant to continue producing more blooms for a longer flowering time. Finally, deadheading takes place as soon as the plants are producing full flower heads. Expect to take off spent blossoms from mid-summer through the first frosts of fall. When the plant starts to wilt during the full, you should cut off the wilted part above the soil as well.

What tools should I prepare for pruning my Gloxinia?

Gloxinia doesn’t take much special equipment for pruning. A basic pair of scissors or garden shears should do the trick. It’s a good idea to ensure they are clean before use—you can soak them for thirty minutes in a solution of one part bleach diluted in nine parts water. This reduces the risk of spreading disease lingering on contaminated equipment into your flower garden. Some gardeners avoid using tools altogether and merely pinch off the blossoms with their fingertips. That can be a faster technique, but you run a larger risk of bruising the plant stems or accidentally pulling them out of the ground completely.

Are there any instructions for pruning my Gloxinia?

Here’s an overview of pruning instructions for Gloxinia based on which of the two types you’re completing. By completing these two types of pruning over the lifespan of your Gloxinia, you’ll encourage them to produce bigger, better flowers for far longer than the plants would otherwise. It only takes a few minutes to complete each step of the pruning process, and you’ll reap the rewards of your efforts for weeks to come. Deadheading Deadheading is a fast, easy way to refresh your garden by removing old flowers and providing space for new ones to take their place. You can use your fingers to pop off old flower heads as soon as they look tired, although you’re less likely to damage the plant if you use shears instead. When deadheading, make sure you cut well below the flower so that you aren’t left with a long, flowerless stem sticking out in your garden bed. Instead, cut the stem to just above the point where the side stem joins the main plant. Remove yellow and diseased leaves, this increases the ventilation and light penetration of the plant and facilitates its growth. When pruning, the leaves need to be trimmed off together with the petiole. It is best to use sterilised scissors to cut them off. Note: It’s a good idea to ensure scissors or garden shears are clean before use—you can soak them for thirty minutes in a solution of one part bleach diluted in nine parts water. This reduces the risk of spreading disease lingering on contaminated equipment into your flower garden.

What type of sunlight does Gloxinia need?

Gloxinia typically needs full, indirect sunlight in order to thrive indoors. This means that the plant should be exposed to bright sunlight that doesn’t hit it directly from a window or another light source, like a grow light. You can easily protect it from direct sunlight by placing a sheer curtain between your Gloxinia and the window, or by placing it behind a part of the window with a dark screen.

How can I avoid damaging new Gloxinia with sunlight?

If this is your first time bringing your Gloxinia home, then it might be a good idea to try to ease it into the sunlight it needs, rather than place it in bright, indirect light right away. Over the course of two weeks or so, you can slowly move your plant into the sunlight to avoid shock or burning of the leaves from sudden intense light exposure. By easing it into the light, your Gloxinia is much more likely to adapt to your home environment well.

How can I tell if Gloxinia is getting too much light?

Gloxinia is one that can easily sunburn with too much sunlight. In the wild, these plants only receive mild, dappled light, filtered down from tree canopies. While they need more light than that to grow in our homes, too much can certainly cause issues. If your Gloxinia is getting too much light, you’ll notice that the foliage begins to look bleached or washed out, the tips of leaves may turn yellow or brown and crispy, and it may even grow too quickly to support itself.

What should I do if my Gloxinia gets light damage?

Sunburn for plants is much less severe than sunburn for people. While it may look unsightly, crispy, burnt leaves can be removed if they’re too far damaged to recover, or over half of the leaf is damaged. However, you can also try trimming back the leaves just to remove any sunburn damage in an effort to save them, if there’s not too much discoloration. Move your Gloxinia away from its light source to avoid future light damage.

Does Gloxinia need different light during different growth stages?

While some plants may be ready to face the sweltering sun straight out of the ground, Gloxinia needs some time to build itself up enough to tolerate bright light. Propagated cuttings should receive only moderate indirect light, while new leaves during the growing season should be shielded a bit as well. The tender new leaves are more prone to sunburn than any other part of the plant.

How can I tell if Gloxinia isn’t getting enough light?

Fortunately, plants can communicate in their own language to convey whether they have adequate sunlight or not. Like most plants, your Gloxinia will tell you if it isn’t getting enough sunlight. The most visible sign is when your plant becomes particularly dark, or there is no new growth on the plant from one season to the next. You’ll also notice that leaves that do grow in may remain smaller than others, since there isn’t enough light to photosynthesize to support large new leaves.

How much sunlight should Gloxinia get each day?

Depending on how bright the sunlight is that your Gloxinia gets, the number of hours in a day may vary. If you have your plant in bright, indirect light, then there’s no need to try to restrict or increase the amount of time your plant gets this light each day. However, if light is less bright or further away from your Gloxinia, then you can try to aim for at least eight hours of full light per day.

What is the optimal temperature for Gloxinia?

For this tropical plant to thrive, you’ll want to keep them between 75℉ and 90℉ (25-32℃). Each species can handle temperatures outside of this range, but keeping it within several degrees of these limits will ensure they grow to their maximum potential.

As for its extreme temperature limits, any environment below 50℉ (10℃) or above 95℉ (35℃) will begin to hinder its growth and cause various aberrations to its leaves and stems. This is especially true with low temperatures; even a light frost can cause your tropical plants to perish. Cellular death can begin to happen at a rapid pace, with some species dying in as little as 12 to 24 hours.

Does Gloxinia require different temperatures for different growing phases?

While Gloxinia doesn’t require any changes in temperature to enter different growing phases, it is important to stay consistent. Wild temperature fluctuations can slow down its growth regardless of its current phase, so it's always better to keep them in a controlled environment. That optimal temperature range of 75℉ and 90℉ (25-32℃) is vital to maintain, especially staying above the lower limit. Going above 90℉(32℃) isn’t ideal, but as tropical plant it won’t suffer too much. On the other hand, going below 50℉ (10℃) (and especially 40℉/5℃) will begin to directly damage this heat-loving plant species.

Does Gloxinia need different temperatures for different seasons?

Gloxinia does not need different temperatures for different growing seasons. The most important step in seasonal care is to keep the environment within the optimal temperature range. That's why it's always best to keep this plant indoors. That way, you can control the temperature no matter what the climate is like outside.

Light is also important for tropical species, with all of these plants preferring a partial side level of sun exposure. This means any light they receive needs to be dappled or filtered, with bright but indirect light being the best option when growing your plants indoors. Too much direct sunlight can negatively affect your plant’s leaves, reducing its growth potential.

What are the temperature guidelines to keep your Gloxinia healthy?

Tip #1: Don’t Leave Your Plant Near Windows in Colder Months

If you want to make sure your plant isn’t exposed to colder temperatures, you may want to keep them away from windows. In colder months like late fall and winter, even the smallest draft can leak cold air into your home through cracks in your windows. While this air usually dissipates and warms up as it travels throughout your home, any plants placed in close proximity to the window will be affected. Move your tropical plants into an area where they will still get bright but indirect light, while making sure they won’t be affected by potential drafts.

Tip #2: If You Find Dry Patches, Your Plant May Be Getting Too Much Sunlight or Heat

You may notice the leaves become white or even scorched on a sunny day. These discolorations and unusual markings usually indicate that a plant is getting too much heat or sunlight, and it may be dehydrated. Excess light and heat will dry out the soil, stopping plants from getting the moisture they need to support their cellular structure. It also slows down or stops the process of photosynthesis, further hindering growth. If ignored for too long, these dry spots can spread and eventually result in the death of your plants.

Tip #3: Avoid Frost at All Costs

Colder temperatures and frost can damage your plants by causing ice crystals or disrupt normal physiological activity. This makes it nearly impossible for water to move freely throughout plant tissue, creating a deficit of moisture in their stems and leaves. You can tell a plant has been damaged by frost if it begins to suffer from hydrosis (it will appear as though it's soaked with water.) If the problem persists, your plants may begin shriveling and turning a dark brown or black hue. After that, the plant will almost certainly die.

What is the best way to maintain the right temperature for my Gloxinia?

The best way to maintain the right temperature range for Gloxinia is by keeping an eye on both the climate and humidity. You’ll want to try to keep each species in a room where you have access to climate control, keeping the heat in the temperature range best mimics its natural habitat. The humidity levels will also have a direct effect on temperature, so it's important to monitor these as well. You can artificially raise the humidity of your growing space by using a humidifier or lightly misting the leaves with water.

If you intend to grow this species outside, you may find it difficult to maintain the right balance of temperature and humidity. If temperatures begin to drop or the air becomes too dry, your best option is to find room within your home and move your plant inside. An indoor growing space will allow you to control the climate more closely, helping your plant reach its full potential.

Why do I need to fertilize my Gloxinia?

Fertilizer, and soil nutrients in general, are an essential form of fuel that your Gloxinia will use to maintain healthy growth. In general, plants use the nutrients they find in the soil to develop new plant material and keep their existing components in good condition.

For the Gloxinia specifically, fertilization is necessary to help this plant display the best version of its flowers. Since the flowers are the main form of attraction to this plant, most gardeners will want to do all they can to ensure the flowers appear in their best form. Fertilization is one of the most reliable ways to help your Gloxinia produce the best possible blooms.

When is the best time to fertilize my Gloxinia?

The Gloxinia goes through two main phases throughout each year. The first phase is the dormant phase, in which this plant will put forth minimal new growth. This dormant phase takes place during the winter. The other phase is the active growth phase, which takes place during spring and fall, which is when your Gloxinia will need fertilization the most.

Generally, it is best to fertilize your Gloxinia starting in the spring months. You should repeat the feeding about once per month throughout the rest of the spring and through most of the summer. As fall approaches, you can begin to reduce your fertilization rate.

When should I avoid fertilizing my Gloxinia?

You want to support Gloxinia growth, but you also don’t want to cause root burn. Your plant is actively growing in the spring and summer, it’s when the extra nutrients are necessary. In the fall and winter, your plant will enter its dormancy stage. It’s when you want to stop fertilizing.

What type of fertilizer does my Gloxinia need?

The ideal fertilizer for a Gloxinia is one that has a relatively balanced mix of the three main plant nutrients, with slightly higher amounts of phosphorus. Alternatively, some gardeners choose to improve their Gloxinia 's soil by adding organic materials such as compost, worm castings, and manure.

Fertilizers can come in many forms, and most of these forms will work well for your Gloxinia. However, some of the best fertilizers for Gloxinia come in either a liquid or a powdered form. Regardless of which you use, you should ensure that you dilute your fertilizer and apply it while watering your Gloxinia.

How do I fertilize my Gloxinia?

Once you have found a suitable fertilizer and learned the ideal fertilization schedule for your Gloxinia, you are ready to learn how to apply your fertilizer. When feeding your Gloxinia, the most reliable method is to mix your liquid fertilizer with water before applying it to the soil.

Each fertilizer may have different directions on how to feed your plants. Usually, it is best to follow the manufacturer's guidance on how to use the fertilizer they produce. These instructions should include information on how to properly dilute the fertilizer to prevent overfertilization. Mixing your fertilizer in water is an easy process, and once it is complete, all you need to do is pour the mixture into the soil where your Gloxinia lives.

What happens if I fertilize my Gloxinia too much?

Overfertilization is something that you should consider when caring for any plant, but it is especially important when growing a Gloxinia. A Gloxinia, when overfertilized, will show clear signs of distress, which, at times, may be so serious that they lead to the death of your plant.

Overfertilized Gloxinia will likely show leaf discoloration as well, including browning. In the worst-case scenarios, excessive fertilization will draw moisture out of your plant's roots, which can cause it to decline quickly.

Get tips and tricks for your plants.

Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.

Common Pests & Diseases

Common issues for Gloxinia based on 10 million real cases

Brown spot

This infection can cause brown spots or patches to appear on the plant.

Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.

Sap-sucking insects

Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.

Solutions: Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it. Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find. Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray. Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.

Plant dried up

The entire plant may dry out due to dieback or normal seasonal dormancy.

Solutions: The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method. Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly. Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems. Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species. Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil. Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.

Wilting after blooming

Flowers may wither for a variety of reasons.

Solutions: Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water. Water according to recommendations for each plant's species. Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too. Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants. Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.

Treat and prevent plant diseases.

AI-powered plant doctor helps you diagnose plant problems in seconds.

Distribution Map

Habitat

Rock face, river bank, wooded hill, beach

Native

Cultivated

Invasive

Potentially invasive

Exotic

No species reported

More Info

Flower Color

White

Red

Purple

Pink

Bloom Time

Spring, Summer, Late fall, Early winter

Leaf Color

Green

Name story

Brazilian gloxinia||Gloxinia

In 1825, botanists decided to change the name of gloxinia speciosa into Sinningia speciosa, in the honor of the German gardener and horticulturalist Wilhelm Sinning. However, in the horticultural trade and among gardeners, this lovely bell-shaped flower still remains known by its former name gloxinia.

Scientific Classification

Phylum

Vascular plants

Class

Dicotyledons

Order

Family

African violet

Genus

Sinningia

Species

Gloxinia

Find your perfect green friends.

Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.

Related Plants

Bush clockvine

This tropical, evergreen shrub grows erect and blooms with bold dark blue or purple flowers through both summer and autumn, making it a lovely choice for hedges, borders, and walls. Though bush clockvine most commonly grows as a bush, it can be 'trained' to grow like a vine (as implied by the name).

Vegetable hummingbird (Sesbania grandiflora) is a fast-growing tree, reaching an average height of up to 4.5 m. It is grown both as an ornamental tree to provide shade and as a method to recolonize degraded or eroded soils. Interestingly, gum from vegetable hummingbird is used to make fishing cord more durable.

Spring, summer, autumn

Vegetable hummingbird

Bismarck Palm (Bismarckia nobilis) is a palm species native to Africa. Bismarck Palm grows well in clay soil in full sunlight. This species is often cultivated as an ornamental palm for landscaping.

Spring, Summer, Winter

Bismarck Palm

Pong-pong (Cerbera odollam) is also known, somewhat dramatically, as the suicide tree because its fruit contains a toxin, cerberin, which is highly poisonous to humans. Despite this, this plant is grown in many gardens as hedging. The seeds are used industrially to make insect repellents and rat poisons.

Summer, Autumn

Pong-pong

Native fuchsia (Correa reflexa) is a shrub that is endemic to Australia where it primarily grows on the southeast coast of the continent. Native fuchsia flowers intermittently throughout the year but its primarily blooming season is spring through fall. The flowers are green-yellow to crimson pendulous tubular and slightly flared at the opening.

Summer, Autumn

Native fuchsia

The king protea is a shrub with a flower that looks like it belongs in a fairy tale. The large, globe-shaped buds resemble giant artichokes before they open. The Latin name *Protea cynaroides* is reminiscent of the Greek sea-god, Proteus, who was known to change shapes, suggesting the diversity found in this unique bloom.

Summer, Autumn

King protea

King protea is a perennial, evergreen shrub that grows to about 1.2 to 1.8 m tall, making it perfect for garden beds and borders, as well as for container cultivation. Its high drought-tolerance makes it ideal for low-maintenance gardens, providing a boost of color in sandy, rocky, or dry soils where other plants may struggle. The large and unique blooms produced by this plant are great for attracting birds, bees, and butterflies to the garden. The flowers also retain their color well when dried, making them popular for dried arrangements and wreaths.

Spring, Summer, Winter

Garden Usage

View More Plants

Most Common Herb

Plant Collection Most Common Herb Fragrant plantain lily See More The trademark feature of Asia-native plantain lilies is the numerous glossy oval leaves with deep parallel veins. The Fragrant plantain lily is additionally decorated with strongly fragrant, trumpet-shaped, large white flowers, which are unique in the genus. Hosta plantaginea is one of the favorite cultivatedContinue reading “Most Common Herb”

Plant Collection Best Perennial Plant to Grow Orange daylily See More The Orange daylily is a perennial plant known for its captivating lily-like blooms. Its natural habitats are meadows and forests, but it is also a common garden plant in temperate regions around the world. Each individual flower lasts only a day, but the plantContinue reading “Best Perennial Plant to Grow”

Plant Collection Suggested Plants to Build a Garden That Blooms All the Year Round Bearded iris See More BloomTime:Spring The Bearded iris is a flowering plant that appears in many different colors. It is a popular garden plant because it’s easy to grow. Though their native lands are in Europe, Bearded irises are often grownContinue reading “Suggested Plants to Build a Garden That Blooms All the Year Round”

Plant Collection Best Perennial Plant to Grow China rose See More The China rose (Rosa chinensis) is a Southwest China native. The plant has been cultivated for so long that it has become hard to tell the difference between wild and cultivated varieties. With medium-sized clusters of flowers and a long blooming season, it isContinue reading “Best Perennial Plant to Grow”

Most Common Herb

Plant Collection Most Common Herb Golden pothos See More The Golden pothos is a popular flowering house plant that’s commonly seen in Australia, Asia, and the West Indies. It goes by many nicknames, including “devil’s ivy,” because it is so hard to kill, and can grow in the dark. Golden pothos has poisonous sap, soContinue reading “Most Common Herb”

Average water needs, watering when the top 3 cm of soil has dried out.

Plant Collection Suggested Plants to Build a Garden That Blooms All the Year Round White mulberry See More BloomTime:Spring A unique and easy-to-grow edible landscaping plant, the White mulberry is prized for its tasty fruits as well as its exquisite ornamental appeal. Originally native to China, this plant was valued for its role in silkContinue reading “Suggested Plants to Build a Garden That Blooms All the Year Round”

View More Articles

Add to My Garden

Gloxinia

Sinningia speciosa

Spring, Summer, Fall

Planting Time

Care Guide for Gloxinia

Water

Fertilization

Fertilization once every 2-3 months during the growing season.

Pruning

Trim the diseased, withered leaves once a month.

Soil

Sand, Acidic, Neutral

Potting Suggestions

Needs excellent drainage in pots.

Know the light your plants really get.

Find the best spots for them to optimize their health, simply using your phone.

Download the App

Questions About Gloxinia

Watering

Pruning

Sunlight

Temperature

Fertilizing

What is the best way to water my Gloxinia?

What should I do if I water my Gloxinia too much or too little?

How often should I water my Gloxinia?

How much water does my Gloxinia need?

How should I water my Gloxinia at different growth stages?

How should I water my Gloxinia through the seasons?

What's the difference between watering my Gloxinia indoors and outdoors?

Do I need to prune my Gloxinia?

When is the best time to prune my Gloxinia?

What tools should I prepare for pruning my Gloxinia?

Are there any instructions for pruning my Gloxinia?

What type of sunlight does Gloxinia need?

How can I avoid damaging new Gloxinia with sunlight?

How can I tell if Gloxinia is getting too much light?

What should I do if my Gloxinia gets light damage?

Does Gloxinia need different light during different growth stages?

How can I tell if Gloxinia isn’t getting enough light?

How much sunlight should Gloxinia get each day?

What is the optimal temperature for Gloxinia?

Does Gloxinia require different temperatures for different growing phases?

Does Gloxinia need different temperatures for different seasons?

What are the temperature guidelines to keep your Gloxinia healthy?

What is the best way to maintain the right temperature for my Gloxinia?

Why do I need to fertilize my Gloxinia?

When is the best time to fertilize my Gloxinia?

When should I avoid fertilizing my Gloxinia?

What type of fertilizer does my Gloxinia need?

How do I fertilize my Gloxinia?

What happens if I fertilize my Gloxinia too much?

Get tips and tricks for your plants.

Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.

Download the App

Common Pests & Diseases

Common issues for Gloxinia based on 10 million real cases

Brown spot

This infection can cause brown spots or patches to appear on the plant.

Learn More

Sap-sucking insects

Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.

Learn More

Plant dried up

The entire plant may dry out due to dieback or normal seasonal dormancy.

Learn More

Wilting after blooming

Flowers may wither for a variety of reasons.

Learn More

Treat and prevent plant diseases.

AI-powered plant doctor helps you diagnose plant problems in seconds.

Download the App

Distribution Map

Habitat

Rock face, river bank, wooded hill, beach

Map

Native

Cultivated

Invasive

Potentially invasive

Exotic

No species reported

More Info

Flower Color

White

Red

Purple

Pink

Bloom Time

Spring, Summer, Late fall, Early winter

Leaf Color

Green

Name story

Brazilian gloxinia||Gloxinia

Scientific Classification

Phylum

Vascular plants

Class

Dicotyledons

Order

Mints plantains olives and allies

Family

African violet

Genus

Sinningia

Species

Gloxinia

Find your perfect green friends.

Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.

Download the App

Related Plants

Bush clockvine

Thunbergia erecta

Vegetable hummingbird

# Useful Tips