About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
Distribution
More Info
Related Plants
Related Articles
Add to My Garden Baby's tears
Soleirolia soleirolii
Also known as: Mind-your-own-business, Pollyana vine, Paddy's wig, Bread and cheese, Friendship plant, Helxine
Baby's tears is a plant built for propagation and survival. It grows Soleirolia soleirolii all along the edges of its leaves, and those tiny plantlets can even grow roots while still attached to the main plant. Flowers are not a seasonal occurrence and may or may not appear on any given plant. When baby's tears does flower, the blooms are pink or grey.
Water
Every week
Sunlight
Partial sun
Care Guide for Baby's tears
Baby's tears is not a plant that is drought tolerant, so be sure that the soil is moist, not soggy, all of the time. Water well throughout the summer but, during the winter months, ensure that the plant's roots do not dry out.
Baby's tears only needs to be fertilized every couple of weeks through the spring and summer. Use a liquid balanced plant fertilizer to get the best results. If feeding a baby's tears houseplant, use a 50/50 diluted houseplant fertilizer.
Trim the diseased, withered leaves once a month.
Sand, Loam, Chalky, Clay, Acidic, Neutral, Alkaline
Needs excellent drainage in pots
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Scan QR code to download
Baby's tears
Water
Every week
Sunlight
Partial sun
Hardiness Zones
9 to 11
Planting Time
Spring, Summer, Fall
Download and print this plant care card and attach it to your plants
Download
Baby's tears
Water
Every week
Sunlight
Partial sun
Hardiness Zones
9 to 11
Planting Time
Spring, Summer, Fall
Download
Baby's tears
Water
Every week
Sunlight
Partial sun
Hardiness Zones
9 to 11
Planting Time
Spring, Summer, Fall
Download
Questions About Baby's tears
Watering 
Pruning 
Sunlight 
Temperature 
Fertilizing What is the best way to water my Baby's tears?
When watering the Baby's tears, you should aim to use filtered water that is at room temperature. Filtered water is better for this plant, as tap water can contain particles that are harmful to its health. The reason that the water should be at room temperature or slightly warmer is that the Baby's tears comes from a warm environment, and cold water can be somewhat of a shock to its system. Also, you should avoid overhead watering for this plant, as it can cause foliage complications. Instead, simply apply your filtered room temperature water to the soil until the soil is entirely soaked. Soaking the soil can be very beneficial for this plant as it moistens the roots and helps them continue to spread through the soil and collect the nutrients they need.
Read More ![more]()
What should I do if I water my Baby's tears too much or too little?
Both overwatering and underwatering will be detrimental to the health of your Baby's tears, but overwatering is a far more common issue. When this species receives too much water, its stems and leaves may begin to wilt and turn from green to yellow. Overwatering over a prolonged period may also lead to diseases such as root rot, mold, and mildew, all of which can kill your plant. Underwatering is far less common for the Baby's tears, as this plant has decent drought tolerance. However, underwatering remains a possibility, and when it occurs, you can expect to find that the leaves of your Baby's tears have become brittle and brown.
It is crucial that you notice the signs of overwatering as soon as possible when caring for your Baby's tears. Some of the diseases that arise from overwatering, such as root rot, may not be correctable if you wait too long. If you see early signs of overwatering, you should reduce your watering schedule immediately. You may also want to assess the quality of soil in which your Baby's tears grows. If you find that the soil drains very poorly, you should replace it immediately with a loose, well-draining potting mix. On the other hand, if you find signs that your Baby's tears is receiving too little water, all you need to do is water more regularly until those signs have subsided.
Read More ![more]()
How often should I water my Baby's tears?
If your plant is in a pot. The most precise way to decide whether your Baby's tears needs water is to plunge your finger into the soil. If you notice that the first two to three inches of soil have become dry, it is time to add some water.
If you grow your Baby's tears outdoors in the ground, you can use a similar method to test the soil. Again, when you find that the first few inches of soil have dried out, it is time to add water. During the spring and early fall, this method will often lead you to water this plant about once every week. When extremely hot weather arrives, you may need to increase your watering frequency to about twice or more per week. With that said, mature, well-established the Baby's tears can show an admirable ability to withstand drought.
Read More ![more]()
How much water does my Baby's tears need?
When it comes time to water your Baby's tears, you should not be shy about how much water you give. With the first two to three inches of soil dry, this plant will appreciate a long and thorough watering. Supply enough water to soak the soil entirely. The amount of water you add should be enough to cause excess water to flow through the drainage holes at the bottom of your pot. If you don’t see excess water draining from the pot, you have likely underwatered your plant. But do not let the water accumulate inside the soil, which will be very dangerous to the plant as well. Alternatively, a lack of water draining through the pot could indicate poorly draining soils, which is detrimental to the health of this plant and should be avoided. If the plant is outside, 1 inch of rain per week will be sufficient.
Read More ![more]()
How should I water my Baby's tears at different growth stages?
The water needs of the Baby's tears can change depending on growth stages as well. For example, when your Baby's tears is in the first few years of its life, or if you have just transplanted it to a new growing location, you will need to give more water than usual. During both of those stages, your Baby's tears will put a lot of energy towards sprouting new roots that will then support future growth. For those roots to perform their best, they need a bit more moisture than they would at a more mature phase. After a few seasons, your Baby's tears will need much less water. Another growth stage in which this plant may need more water is during the bloom period. Flower development can make use of a significant amount of moisture, which is why you might need to give your Baby's tears more water at this time.
Read More ![more]()
How should I water my Baby's tears through the seasons?
The Baby's tears will have its highest water needs during the hottest months of the year. During the height of summer, you may need to give this plant water more than once per week, depending on how fast the soil dries out. The opposite is true during the winter. In winter, your plant will enter a dormant phase, in which it will need far less water than usual. In fact, you may not need to water this plant at all during the winter months. However, if you do water during winter, you should not do so more than about once per month. Watering too much at this time will make it more likely that your Baby's tears will contract a disease.
Read More ![more]()
What's the difference between watering my Baby's tears indoors and outdoors?
It is most common to grow the Baby's tears indoors for any gardener that does not live in temperate and tropical regions. Those gardeners should consider the fact that soil in a container can dry out a bit faster than ground soil. Also, the presence of drying elements such as air conditioning units can cause your Baby's tears to need water on a more frequent basis as well. if you planted it outside. When that is the case, it’s likely you won’t need to water your Baby's tears very much at all. If you receive rainfall on a regular basis, that may be enough to keep your plant alive. Alternatively, those who grow this plant inside will need to water it more often, as allowing rainwater to soak the soil will not be an option.
Read More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
More Questions People Also Ask
More About How-Tos
Explore 5 of plant how-tos on Feng shui direction, Water, Lighting, Temperature, Transplant spacing, etc.
Feng shui direction
North
Baby's tears resonates auspiciously with North-facing orientations, a Feng Shui direction tied to the element of water. It encapsulates elements of growth and transformation, mirroring the plant's harmonious attributes towards adaptability and new beginnings. However, the nuances of Feng Shui are diverse and subjective, varying with personal chi.
Water
Every week
Baby's tears prefers consistently moist soil, as it originates from damp, shaded environments like woodland floors. It is important to not let the soil dry out completely. Monitor and adjust watering during seasonal changes to maintain soil moisture.
Lighting
Partial sun
Baby's tears thrives best under moderate sun exposure but can also exist comfortably in more shady areas. This plant's ability to grow stems from its origin environment where it adapted to various levels of sunlight. However, too much sunlight can result in damage, while too little might hinder its growth.
Temperature
10 to 35 ℃
In its native growth environment, baby's tears prefers temperatures ranging from 20 to 38 ℃ (68 to 100℉). In cultivation, it can tolerate temperatures as low as 10℃ (50℉) but is sensitive to frost. During hot summer months, it benefits from partial shade or misting to keep its temperature around 20-22℃ (68-72℉).
Transplant spacing
3-6 inches
The ideal time to transplant baby's tears is between late spring and late summer when growth is most vigorous. Choose a partially to fully shaded location to meet its light requirements. When transplanting, ensure proper soil drainage to avoid root rot and create a thriving environment.
Common Pests & Diseases
Common issues for Baby's tears based on 10 million real cases
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Solutions: If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Leaf rot
This pathogen can cause the leaves to rot.
Solutions: Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden. In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label. In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Fire ants
Fire ants gnaw on the roots of plants and are aggressive toward people.
Solutions: Caution: fire ants are venomous and cause painful bites which can be fatal in the case of a rare but significant allergy. Fire ants can be a painful pest to have around for you and your plants. Keeping them under control will ensure comfortable gardening for all. For less severe cases: Physically remove mounds. Dig out and remove entire mounds (remember, they go deeper than they seem). Use citrus oil. Pour citrus oil, which is toxic to fire ants, down their holes. For severe cases: Use ant bait. For a chemical solution, broadcast insecticide bait formulated for fire ants in the area around a mound. Apply the bait during a dry evening so the ants can forage for it at night. Look for products that contain Indoxacarb. Release phorid flies. Introduce or promote beneficial phorid flies to gardens. These parasitic flies attack invasive fire ants. Hire a professional. Some ant baits are only available to professional exterminators. For serious cases of fire ants, consider hiring a professional.
Underwatering
Leaves may wilt for a variety of reasons.
Solutions: The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with. Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock. In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Overview
Regardless of the type of plant or where it is grown, at some point, it will begin to aged yellow and dry. This is a natural, unavoidable process that happens when the plant has completed all of the steps in its life.
Annual plants go through this process at the end of a single growing season. Perennial plants live for multiple years, if not tens or hundreds of years, but will still ultimately exhibit these symptoms.
Symptom Analysis
When plants have progressed through their natural developmental stages and are nearing the end of their lifecycle, they begin showing signs of decline. Leaves will start to yellow and droop, and over time they turn papery brown and dry.
Once completely dry, the leaves begin to fall from the plant until the entire plant has dried out.
Disease Cause
At the end of its life, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence or natural aging and death. Cell division stops, and the plant begins catabolizing resources to use in other parts of the plant.
As this happens, the tissues begin yellow and drying until the entire plant is desiccated and perishes.
Solutions
If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Prevention
Unfortunately, there is no way to prevent plants from dying of “old age.” To help prolong their life, and put off symptoms of aged yellow and dry for as long as possible, take care of them by giving them enough water, fertilizing them appropriately, and making sure they get enough sunlight.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Leaf rot
This pathogen can cause the leaves to rot.
Overview
Leaf rot is very common among both house plants and garden plants. It affects foliage and occurs mainly when the leaves become wet due to rain or misting by the gardener. The cause is fungal disease and this is facilitated by the fungal spores adhering to wet leaves then penetrating the leaf and expanding rapidly. Damp conditions and poor air circulation will increase chances of infection taking place. Another factor are leaves that are damaged or have been penetrated by sap sucking insects that facilitate plant penetration.
Symptom Analysis
- Spores are able to cling to a damp leaf and penetrate, often through an existing wound.
- A small dark brown mark appears which expands rapidly as sporulation starts to take place.
- Quite quickly these bull's eye like circles can link together and the whole leaf turns dark and loses texture.
- Leaf drop occurs.
Disease Cause
These symptoms are caused by a bacterial infection invading the plant. Bacteria from many sources in the environment (air, water, soil, diseased plants) enter a plant through wounds, or in some cases the stomata when they are open. Once inside the leaf tissue, the bacteria feed and reproduce quickly, breaking down healthy leaves.
Bacterial infections threaten most plant species, and are more prominent in wet weather that more easily transfers the bacteria from plant to plant, or from soil to plant.
Solutions
Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden.
In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label.
In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Prevention
- Clean up garden debris at the end of the season, especially if it contains any diseased plant tissue. Diseases can overwinter from season to season and infect new plants.
- Avoid overhead watering to prevent transferring pathogens from one plant to another, and to keep foliage dry.
- Mulch around the base of plants to prevent soil-borne bacteria from splashing up onto uninfected plants.
- Sterilize cutting tools using a 10% bleach solution when gardening and moving from one plant to another.
- Do not work in your garden when it is wet.
- Rotate crops to prevent the buildup of bacteria in one site due to continuous cropping.
- Use a copper or streptomycin-containing bactericide in early spring to prevent infection. Read label directions carefully as they are not suitable for all plants.
- Ensure plants are well spaced and thin leaves on densely leaved plants so that air circulation is maximised.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Fire ants
Fire ants gnaw on the roots of plants and are aggressive toward people.
Overview
Fire ants are a group of ants that are known for their aggressive behavior and painful stings. Some fire ants are native and others are invasive from other countries. Once they reach plants, they climb them and chew away at leaves and flower buds.
Fire ants also kill and eat beneficial insects such as caterpillars, ladybugs, mantis, and native ants. They can be a problem any time temperatures are above freezing, but new infestations are most likely to appear when brought in via contaminated material such as potting soil or mulch, or when insecticides have harmed populations of beneficial insects that would otherwise control populations of fire ants.
They can be difficult to control, especially once populations become large. Plant damage is typically minor, but fire ants can destroy seedlings.
Symptom Analysis
The number one symptom of fire ants is seeing the ants themselves which are red or black in color. Ant mounds in the ground are also signs. Fire ant mounds rarely exceed 46 cm in diameter. If a fire ant mound is disturbed, many fast-moving, aggressive ants will emerge. These ants will bite and then painfully sting.
Even if no ants are visible, their damage might be apparent. Chewed leaf and flower edges might indicate fire ants. Fully eaten seedlings are another sign.
Solutions
Caution: fire ants are venomous and cause painful bites which can be fatal in the case of a rare but significant allergy.
Fire ants can be a painful pest to have around for you and your plants. Keeping them under control will ensure comfortable gardening for all.
For less severe cases:
- Physically remove mounds. Dig out and remove entire mounds (remember, they go deeper than they seem).
- Use citrus oil. Pour citrus oil, which is toxic to fire ants, down their holes.
For severe cases:
- Use ant bait. For a chemical solution, broadcast insecticide bait formulated for fire ants in the area around a mound. Apply the bait during a dry evening so the ants can forage for it at night. Look for products that contain Indoxacarb.
- Release phorid flies. Introduce or promote beneficial phorid flies to gardens. These parasitic flies attack invasive fire ants.
- Hire a professional. Some ant baits are only available to professional exterminators. For serious cases of fire ants, consider hiring a professional.
Prevention
Fire ants become more difficult to control as they establish themselves, so try to prevent them or treat them early.
- Monitor new material. Do not bring in any soil or plants from known infested areas, unless if they are "Quarantine Approved." Make sure to check new material for fire ants.
- Apply insecticide. Some warm and humid areas have high fire ants populations. In these areas, spread a granular fire ants insecticide such as Varsity in the spring near gardens to prevent these unwelcome visitors.
- Treat early. Spot treat at the first sight of any fire ants mound, as larger mounds are more difficult to treat.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Underwatering
Leaves may wilt for a variety of reasons.
Overview
Underwatering plants is one of the quickest ways to kill them. This is something that most gardeners are well aware of. Unfortunately, knowing exactly how much water a plant needs can be tricky, especially considering that underwatering and overwatering present similar symptoms in plants.
Therefore, it’s important to be vigilant and attentive to each plants’ individual needs.
Symptom Analysis
As mentioned earlier, overwatering and underwatering present similar symptoms in plants. These symptoms include poor growth, wilted leaves, defoliation, and brown leaf tips or margins. Ultimately, both underwatering and overwatering can lead to the death of a plant.
The easiest way to determine whether a plant has too much water or too little is to look at the leaves. If underwatering is the culprit, the leaves will look brown and crunchy, while if it’s overwatering, they will appear yellow or a pale green in color.
When this issue first begins, there may be no noticeable symptoms at all, particularly in hardy or drought-tolerant plants. However, they will begin to wilt once they start suffering from a lack of water. The edges of the plant’s leaves will become brown or curled. Soil pulling away from the edges of the planter is a telltale sign, or a crispy, brittle stem.
Prolonged underwatering can cause a plant’s growth to become stunted. The leaves might drop and the plant can be more susceptible to pest infestations, too.
Disease Cause
Underwatering is caused by, quite simply, not watering plants often or deeply enough. There is a heightened risk of underwatering if any of these situations apply:
- Extreme heat and dry weather (when growing outdoors)
- Grow lights or indoor lighting that is too bright or intense for the type of plant
- Using fast-draining growing media such as sand
Solutions
The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with.
Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock.
In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Prevention
Always check the soil before watering. If the top inch of soil feels moist, though not wet, the watering is perfect. If it’s dry, water it immediately. If it feels soggy, you avoid watering until it dries out a bit more.
Also, make sure the lighting is sufficient for the species. Plants grow faster and need more water when there is intense light or lots of heat. Being aware of these conditions and modifying them, if possible, is a good way to prevent underwatering. Many container plants are potted in soil mixtures mean to be well-draining. Adding materials that retain moisture, like compost or peat moss, can also prevent these symptoms.
Other tips to prevent underwatering include:
- Choose pots with adequately-sized drainage holes
- Avoid warm temperatures
- Use large pots with additional soil (these take longer to dry out)
- Avoid terracotta pots, which lose water quickly
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Distribution Map
Habitat
Gardens
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info
Plant Type
Herb
Flower Color
White
Pink
Bloom Time
Summer
Leaf Color
Green
Yellow
Name story
Mother of thousands
In the 19th century, an amateur botanist by the name of Henri-Augustin Soleirol collected this plant in Corsica and made it commercially available. Soleirolia soleirolii is named after him.
Usages
Garden Use
Baby's tears is a mat-forming perennial best used as a ground cover plant. It prefers full shade to partial shade. Though its flowers are insignificant, the shiny, lime-green foliage is what is sought after when choosing this plant for outdoor garden use.
Scientific Classification
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Related Plants
Field pumpkin
Field pumpkin are most commonly seen as decorations throughout the autumn and during the Halloween holiday, when they are carved and used as traditional jack-o'-lanterns. While the taste of field pumpkin flesh may not be ideal, eating the seeds after toasting them with a bit of salt can be a delicious treat!
Bloom Time
Summer
Garden Usage
Field pumpkin with fruits in various shapes and colors are delightful decorations in garden. In the garden, you will see field pumpkin vines sprawling over the ground, although they are great climbers, and on neighboring vegetation on which they support themselves with their tendrils. Pumpkins it produced can be eaten raw, cooked into soups, pies and baked goods. Never hard to grow one in garden on your own!
Pygmy water lily
Pygmy water lily is a hardy aquatic perennial that thrives in areas with ample sun but with cooler temperatures. This small, plant is typically used for still-water garden ponds and water features, providing a wonderful aesthetic while also offering shelter for aquatic creatures and controlling algae spread.
Bloom Time
Summer, Autumn
Chinese hibiscus
Chinese hibiscus is a small flowering tree. Its fragrant flowers are well known the world over, leading to many cultivated variants. Chinese hibiscus is the national flower of Malaysia and is featured on Malaysian coins. Although the Latin name, Hibiscus rosa-sinensis, means “the rose of China,” it is not related to true roses.
Bloom Time
Summer, autumn
Garden Usage
Most Hibiscus plants of the Malvaceae (Hibiscus spp.) family are native to tropical and subtropical zones. With large, bright flowers, they are widely utilized as garden plants, bringing a tropical style to gardens. They also attract butterflies and hummingbirds, and have edible flowers that can be used for tea.
African false hosta
African false hosta (Drimiopsis maculata) is a flowering plant that is native to parts of Africa. It is sometimes known as “leopard plant” because of the dark green spots on its light green leaves. Each plant produces a spike of small, creamy-white flowers.
Bloom Time
Spring
Pohutukawa
Another name for pohutukawa (Metrosideros excelsa) is an evergreen tree native to New Zealand with showy flowers that look like crimson bottlebrushes. If you take good care of it, this tree will last ten years.
Bloom Time
Summer
Mandacaru
Mandacaru is a spiny flowering succulent tree that has no leaves. In spring, the blossoms bloom at dusk and wither by the morning. In the past, it has been used for timber and construction or feed for livestock at times of drought; now, it can be used as a living fence or as an ornamental.
Bloom Time
Winter
Garden Usage
Cactus are popular choices to plant in pots or in gardens for ornamental effect. They often have succulent stems, are commonly covered with thorns, and give delicate flowers. Most plants of Cactaceae family are resistant to drought, need sufficient sunlight, and are easy to care for.
View More Plants
Related Articles
Useful Tips
Most Common Herb
Plant Collection Most Common Herb Fragrant plantain lily See More The trademark feature of Asia-native plantain lilies is the numerous glossy oval leaves with deep parallel veins. The Fragrant plantain lily is additionally decorated with strongly fragrant, trumpet-shaped, large white flowers, which are unique in the genus. Hosta plantaginea is one of the favorite cultivatedContinue reading “Most Common Herb”
Read More ![more]()
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow Orange daylily See More The Orange daylily is a perennial plant known for its captivating lily-like blooms. Its natural habitats are meadows and forests, but it is also a common garden plant in temperate regions around the world. Each individual flower lasts only a day, but the plantContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Suggested Plants to Build a Garden That Blooms All the Year Round
Plant Collection Suggested Plants to Build a Garden That Blooms All the Year Round Bearded iris See More BloomTime:Spring The Bearded iris is a flowering plant that appears in many different colors. It is a popular garden plant because it’s easy to grow. Though their native lands are in Europe, Bearded irises are often grownContinue reading “Suggested Plants to Build a Garden That Blooms All the Year Round”
Read More ![more]()
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow China rose See More The China rose (Rosa chinensis) is a Southwest China native. The plant has been cultivated for so long that it has become hard to tell the difference between wild and cultivated varieties. With medium-sized clusters of flowers and a long blooming season, it isContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Most Common Herb
Plant Collection Most Common Herb Golden pothos See More The Golden pothos is a popular flowering house plant that’s commonly seen in Australia, Asia, and the West Indies. It goes by many nicknames, including “devil’s ivy,” because it is so hard to kill, and can grow in the dark. Golden pothos has poisonous sap, soContinue reading “Most Common Herb”
Read More ![more]()
Useful Tips
Suggested Plants to Build a Garden That Blooms All the Year Round
Plant Collection Suggested Plants to Build a Garden That Blooms All the Year Round White mulberry See More BloomTime:Spring A unique and easy-to-grow edible landscaping plant, the White mulberry is prized for its tasty fruits as well as its exquisite ornamental appeal. Originally native to China, this plant was valued for its role in silkContinue reading “Suggested Plants to Build a Garden That Blooms All the Year Round”
Read More ![more]()
View More Articles
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
Distribution
More Info
Related Plants
Related Articles
Add to My Garden Baby's tears
Soleirolia soleirolii
Also known as: Mind-your-own-business, Pollyana vine, Paddy's wig, Bread and cheese, Friendship plant, Helxine
Baby's tears is a plant built for propagation and survival. It grows Soleirolia soleirolii all along the edges of its leaves, and those tiny plantlets can even grow roots while still attached to the main plant. Flowers are not a seasonal occurrence and may or may not appear on any given plant. When baby's tears does flower, the blooms are pink or grey.
Water
Every week
Sunlight
Partial sun
Care Guide for Baby's tears
Water
Baby's tears is not a plant that is drought tolerant, so be sure that the soil is moist, not soggy, all of the time. Water well throughout the summer but, during the winter months, ensure that the plant's roots do not dry out.
Fertilization
Baby's tears only needs to be fertilized every couple of weeks through the spring and summer. Use a liquid balanced plant fertilizer to get the best results. If feeding a baby's tears houseplant, use a 50/50 diluted houseplant fertilizer.
Pruning
Trim the diseased, withered leaves once a month.
Soil
Sand, Loam, Chalky, Clay, Acidic, Neutral, Alkaline
Potting Suggestions
Needs excellent drainage in pots
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
Download
Questions About Baby's tears
Watering Pruning Sunlight Temperature Fertilizing What is the best way to water my Baby's tears?
What should I do if I water my Baby's tears too much or too little?
How often should I water my Baby's tears?
How much water does my Baby's tears need?
How should I water my Baby's tears at different growth stages?
Show More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
Download the App
More Questions People Also Ask
More About How-Tos
Common Pests & Diseases
Common issues for Baby's tears based on 10 million real cases
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Solutions: If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Learn More ![more]()
Leaf rot
This pathogen can cause the leaves to rot.
Solutions: Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden. In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label. In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Learn More ![more]()
Fire ants
Fire ants gnaw on the roots of plants and are aggressive toward people.
Solutions: Caution: fire ants are venomous and cause painful bites which can be fatal in the case of a rare but significant allergy. Fire ants can be a painful pest to have around for you and your plants. Keeping them under control will ensure comfortable gardening for all. For less severe cases: Physically remove mounds. Dig out and remove entire mounds (remember, they go deeper than they seem). Use citrus oil. Pour citrus oil, which is toxic to fire ants, down their holes. For severe cases: Use ant bait. For a chemical solution, broadcast insecticide bait formulated for fire ants in the area around a mound. Apply the bait during a dry evening so the ants can forage for it at night. Look for products that contain Indoxacarb. Release phorid flies. Introduce or promote beneficial phorid flies to gardens. These parasitic flies attack invasive fire ants. Hire a professional. Some ant baits are only available to professional exterminators. For serious cases of fire ants, consider hiring a professional.
Learn More ![more]()
Underwatering
Leaves may wilt for a variety of reasons.
Solutions: The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with. Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock. In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Learn More ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App
Aged yellow and dry
Natural aging can cause leaves to turn yellow and dry out.
Overview
Regardless of the type of plant or where it is grown, at some point, it will begin to aged yellow and dry. This is a natural, unavoidable process that happens when the plant has completed all of the steps in its life.
Annual plants go through this process at the end of a single growing season. Perennial plants live for multiple years, if not tens or hundreds of years, but will still ultimately exhibit these symptoms.
Symptom Analysis
When plants have progressed through their natural developmental stages and are nearing the end of their lifecycle, they begin showing signs of decline. Leaves will start to yellow and droop, and over time they turn papery brown and dry.
Once completely dry, the leaves begin to fall from the plant until the entire plant has dried out.
Disease Cause
At the end of its life, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence or natural aging and death. Cell division stops, and the plant begins catabolizing resources to use in other parts of the plant.
As this happens, the tissues begin yellow and drying until the entire plant is desiccated and perishes.
Solutions
If the yellowing and drying of leaves and flowers is a natural progression due to age, nothing can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
Prevention
Unfortunately, there is no way to prevent plants from dying of “old age.” To help prolong their life, and put off symptoms of aged yellow and dry for as long as possible, take care of them by giving them enough water, fertilizing them appropriately, and making sure they get enough sunlight.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Leaf rot
This pathogen can cause the leaves to rot.
Overview
Leaf rot is very common among both house plants and garden plants. It affects foliage and occurs mainly when the leaves become wet due to rain or misting by the gardener. The cause is fungal disease and this is facilitated by the fungal spores adhering to wet leaves then penetrating the leaf and expanding rapidly. Damp conditions and poor air circulation will increase chances of infection taking place. Another factor are leaves that are damaged or have been penetrated by sap sucking insects that facilitate plant penetration.
Symptom Analysis
- Spores are able to cling to a damp leaf and penetrate, often through an existing wound.
- A small dark brown mark appears which expands rapidly as sporulation starts to take place.
- Quite quickly these bull's eye like circles can link together and the whole leaf turns dark and loses texture.
- Leaf drop occurs.
Disease Cause
These symptoms are caused by a bacterial infection invading the plant. Bacteria from many sources in the environment (air, water, soil, diseased plants) enter a plant through wounds, or in some cases the stomata when they are open. Once inside the leaf tissue, the bacteria feed and reproduce quickly, breaking down healthy leaves.
Bacterial infections threaten most plant species, and are more prominent in wet weather that more easily transfers the bacteria from plant to plant, or from soil to plant.
Solutions
Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden.
In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label.
In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Prevention
- Clean up garden debris at the end of the season, especially if it contains any diseased plant tissue. Diseases can overwinter from season to season and infect new plants.
- Avoid overhead watering to prevent transferring pathogens from one plant to another, and to keep foliage dry.
- Mulch around the base of plants to prevent soil-borne bacteria from splashing up onto uninfected plants.
- Sterilize cutting tools using a 10% bleach solution when gardening and moving from one plant to another.
- Do not work in your garden when it is wet.
- Rotate crops to prevent the buildup of bacteria in one site due to continuous cropping.
- Use a copper or streptomycin-containing bactericide in early spring to prevent infection. Read label directions carefully as they are not suitable for all plants.
- Ensure plants are well spaced and thin leaves on densely leaved plants so that air circulation is maximised.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Fire ants
Fire ants gnaw on the roots of plants and are aggressive toward people.
Overview
Fire ants are a group of ants that are known for their aggressive behavior and painful stings. Some fire ants are native and others are invasive from other countries. Once they reach plants, they climb them and chew away at leaves and flower buds.
Fire ants also kill and eat beneficial insects such as caterpillars, ladybugs, mantis, and native ants. They can be a problem any time temperatures are above freezing, but new infestations are most likely to appear when brought in via contaminated material such as potting soil or mulch, or when insecticides have harmed populations of beneficial insects that would otherwise control populations of fire ants.
They can be difficult to control, especially once populations become large. Plant damage is typically minor, but fire ants can destroy seedlings.
Symptom Analysis
The number one symptom of fire ants is seeing the ants themselves which are red or black in color. Ant mounds in the ground are also signs. Fire ant mounds rarely exceed 46 cm in diameter. If a fire ant mound is disturbed, many fast-moving, aggressive ants will emerge. These ants will bite and then painfully sting.
Even if no ants are visible, their damage might be apparent. Chewed leaf and flower edges might indicate fire ants. Fully eaten seedlings are another sign.
Solutions
Caution: fire ants are venomous and cause painful bites which can be fatal in the case of a rare but significant allergy.
Fire ants can be a painful pest to have around for you and your plants. Keeping them under control will ensure comfortable gardening for all.
For less severe cases:
- Physically remove mounds. Dig out and remove entire mounds (remember, they go deeper than they seem).
- Use citrus oil. Pour citrus oil, which is toxic to fire ants, down their holes.
For severe cases:
- Use ant bait. For a chemical solution, broadcast insecticide bait formulated for fire ants in the area around a mound. Apply the bait during a dry evening so the ants can forage for it at night. Look for products that contain Indoxacarb.
- Release phorid flies. Introduce or promote beneficial phorid flies to gardens. These parasitic flies attack invasive fire ants.
- Hire a professional. Some ant baits are only available to professional exterminators. For serious cases of fire ants, consider hiring a professional.
Prevention
Fire ants become more difficult to control as they establish themselves, so try to prevent them or treat them early.
- Monitor new material. Do not bring in any soil or plants from known infested areas, unless if they are "Quarantine Approved." Make sure to check new material for fire ants.
- Apply insecticide. Some warm and humid areas have high fire ants populations. In these areas, spread a granular fire ants insecticide such as Varsity in the spring near gardens to prevent these unwelcome visitors.
- Treat early. Spot treat at the first sight of any fire ants mound, as larger mounds are more difficult to treat.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Underwatering
Leaves may wilt for a variety of reasons.
Overview
Underwatering plants is one of the quickest ways to kill them. This is something that most gardeners are well aware of. Unfortunately, knowing exactly how much water a plant needs can be tricky, especially considering that underwatering and overwatering present similar symptoms in plants.
Therefore, it’s important to be vigilant and attentive to each plants’ individual needs.
Symptom Analysis
As mentioned earlier, overwatering and underwatering present similar symptoms in plants. These symptoms include poor growth, wilted leaves, defoliation, and brown leaf tips or margins. Ultimately, both underwatering and overwatering can lead to the death of a plant.
The easiest way to determine whether a plant has too much water or too little is to look at the leaves. If underwatering is the culprit, the leaves will look brown and crunchy, while if it’s overwatering, they will appear yellow or a pale green in color.
When this issue first begins, there may be no noticeable symptoms at all, particularly in hardy or drought-tolerant plants. However, they will begin to wilt once they start suffering from a lack of water. The edges of the plant’s leaves will become brown or curled. Soil pulling away from the edges of the planter is a telltale sign, or a crispy, brittle stem.
Prolonged underwatering can cause a plant’s growth to become stunted. The leaves might drop and the plant can be more susceptible to pest infestations, too.
Disease Cause
Underwatering is caused by, quite simply, not watering plants often or deeply enough. There is a heightened risk of underwatering if any of these situations apply:
- Extreme heat and dry weather (when growing outdoors)
- Grow lights or indoor lighting that is too bright or intense for the type of plant
- Using fast-draining growing media such as sand
Solutions
The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with.
Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock.
In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Prevention
Always check the soil before watering. If the top inch of soil feels moist, though not wet, the watering is perfect. If it’s dry, water it immediately. If it feels soggy, you avoid watering until it dries out a bit more.
Also, make sure the lighting is sufficient for the species. Plants grow faster and need more water when there is intense light or lots of heat. Being aware of these conditions and modifying them, if possible, is a good way to prevent underwatering. Many container plants are potted in soil mixtures mean to be well-draining. Adding materials that retain moisture, like compost or peat moss, can also prevent these symptoms.
Other tips to prevent underwatering include:
- Choose pots with adequately-sized drainage holes
- Avoid warm temperatures
- Use large pots with additional soil (these take longer to dry out)
- Avoid terracotta pots, which lose water quickly
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Distribution Map
Habitat
Gardens
Map
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info
Plant Type
Herb
Flower Color
White
Pink
Bloom Time
Summer
Leaf Color
Green
Yellow
Name story
Mother of thousands
In the 19th century, an amateur botanist by the name of Henri-Augustin Soleirol collected this plant in Corsica and made it commercially available. Soleirolia soleirolii is named after him.
Usages
Garden Use
Baby's tears is a mat-forming perennial best used as a ground cover plant. It prefers full shade to partial shade. Though its flowers are insignificant, the shiny, lime-green foliage is what is sought after when choosing this plant for outdoor garden use.
Scientific Classification
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Download the App
Related Plants
Related Articles
Most Common Herb
# Useful Tips
Best Perennial Plant to Grow
# Useful Tips
Suggested Plants to Build a Garden That Blooms All the Year Round
# Useful Tips
Best Perennial Plant to Grow
# Useful Tips
Most Common Herb
# Useful Tips
Suggested Plants to Build a Garden That Blooms All the Year Round
# Useful Tips
Discover more articles?
Read More 
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Sign in/sign up
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Water
Indoor
Indoor
Outdoor potted
In the ground
Choose a site here for personalized care tips. Essentials
Baby's tears prefers consistently moist soil, as it originates from damp, shaded environments like woodland floors. It is important to not let the soil dry out completely. Monitor and adjust watering during seasonal changes to maintain soil moisture.
Watering check today
More
Spring
Summer
Autumn
Winter
Morning
Noonday
Evening
Morning watering can reduce the risk of fungal growth. Requirements
Every week
Watering Frequency
Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App
Just like people, each plant has its own preferences and needs. Devote time to understanding your plants so you can nurture them properly. Observe your plants attentively, learning from their growth patterns, and becoming more in tune with their needs as you grow together. Keep a watchful eye on new plants and seedlings, as they are sensitive to both overwatering and underwatering. Shower them with gentle love and attention, fostering their growth and strength. Let the rhythm of your local climate guide your watering habits, adapting your schedule to the changing weather and the needs of your plants. Amount and Approach
Watering from the soil
1. Gradually pour water to the soil from above.
2. Stop watering your plant once water begins to flow out of the drainage holes in the pot.
3. Allow it to rest for 1 minute, then discard any water remaining in the tray, making sure your plant is not sitting in the water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Watering from the bottom
1. Fill the tray with water, ensure that the soil makes contact with the water.
2. Let it rest for 10 minutes.
3. Drain excess water from the tray if the soil is uniformly damp.
4. Watering more to the tray if the soil remains dry.
5. Allow it to sit for an additional 20 minutes before draining any excess water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Soaking the water
1. Select a location for soaking your plants, such as a tray or bathtub.
2. Pour a few centimeters of fresh water into the bottom of your chosen container.
3. Soaking your plant pots within the water, allowing them to absorb moisture for 1 hour.
4. Remove the plants from the water and let them dry.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. For Baby's tears, outdoor watering can be done using the method of sprinkling. It is a simple and direct approach. It involves pouring water onto the soil around the plant, allowing the water to naturally seep into the root zone. Typically, containers such as watering cans, buckets, or watering jugs are used for sprinkling. Depending on the size of the plant, usually, 1-2 gallons of water are required to ensure the soil around the roots is thoroughly moistened.
Important Symptoms
Overwatering
Baby's tears is more susceptible to developing disease symptoms when overwatered because it prefers a soil environment with moderate humidity. Symptoms of overwatering include yellowing leaves, brown or black spots, root rot...
View more
(Symptom details and solutions)
Brown or black spots
Excessive watering can damage the plant's root system, making it vulnerable to fungal infections. The plant may develop dark brown to black spots that spread upwards from the lower leaves which are usually the first to be affected.
Root rot
Excess water in the soil can lead to the growth of harmful fungi and bacteria, causing the roots to rot and eventually kill the plant.
Soft or mushy stems
Excess water can cause stems to become soft and mushy, as the cells become waterlogged and lose their structural integrity.
Increased susceptibility diseases
Overwatering plants may become more susceptible and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Adjust watering frequency based on seasons and soil dryness. Wait for soil to dry before watering.2. Increase soil aeration by loosening surface and gently stirring with a wooden stick or chopstick.3. Optimize environment with good ventilation and warmth to enhance water evaporation and prevent overwatering.
Underwatering
Baby's tears is more susceptible to plant health issues when lacking watering, as it can only tolerate short periods of drought. Symptoms of dehydration include wilting, leaf curling, yellowing leaves...
View more
(Symptom details and solutions)
Wilting
Due to the dry soil and insufficient water absorption by the roots, the leaves of the plant will appear limp, droopy, and lose vitality.
Leaf curling
Leaves may curl inward or downward as they attempt to conserve water and minimize water loss through transpiration.
Increased susceptibility to pests and diseases
Underwatered plants may become more susceptible to pests and diseases as their overall health declines, weakening their natural defenses.
Dying plant
If underwatering continues for an extended period, the plant may ultimately die as a result of severe water stress and an inability to carry out essential functions.
Solutions
1. Thoroughly saturate soil with slow ring watering to ensure uniform and sufficient moisture for plants. 2. Increase air humidity with water trays or misting to slow leaf water evaporation. 3. Watering according to the recommended frequency.Adjust watering frequency based on seasons and soil dryness.
Discover information about plant diseases, toxicity, weed control and more.
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Partial sun
Ideal
About 3-6 hours sunlight
Full shade
Tolerance
Less than 3 hours of sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
Baby's tears thrives best under moderate sun exposure but can also exist comfortably in more shady areas. This plant's ability to grow stems from its origin environment where it adapted to various levels of sunlight. However, too much sunlight can result in damage, while too little might hinder its growth.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Baby's tears is a versatile plant that thrives in partial sunlight but can tolerate full sunlight in cooler weather. Although symptoms of light deficiency may not be easily noticeable, inadequate light conditions can affect their growth indoors.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your baby's tears may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
Baby's tears enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To optimize plant growth, shift them to increasingly sunnier spots each week until they receive 3-6 hours of direct sunlight daily, enabling gradual adaptation to changing light conditions.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Baby's tears thrives with partial sun exposure but is more prone to sunburn. The intense sunlight during summer can cause leaf sunburn, making it important to provide adequate shade and protection.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover information about plant diseases, toxicity, weed control and more.
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
In its native growth environment, baby's tears prefers temperatures ranging from 20 to 38 ℃ (68 to 100℉). In cultivation, it can tolerate temperatures as low as 10℃ (50℉) but is sensitive to frost. During hot summer months, it benefits from partial shade or misting to keep its temperature around 20-22℃ (68-72℉).
Regional wintering strategies
Baby's tears is extremely heat-loving, and any cold temperatures can cause harm to it. In the autumn, it is recommended to bring outdoor-grown Baby's tears indoors and place it near a bright window, but it should be kept at a certain distance from heaters. Maintaining temperatures above {Suitable_growth_temperature_min} during winter is beneficial for plant growth. Any temperatures approaching {Tolerable_growing_temperature_min} are detrimental to the plant.
Important Symptoms
Low Temperature
Baby's tears prefers warm temperatures and is not tolerant of low temperatures. It thrives best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, the leaves may lighten in color. After frost damage, the color gradually turns brown or black, and symptoms such as wilting and drooping may occur.
Solutions
Trim off the frost-damaged parts. Immediately move indoors to a warm environment for cold protection. Choose a spot near a south-facing window to place the plant, ensuring ample sunlight. Additionally, avoid placing the plant near heaters or air conditioning vents to prevent excessive dryness in the air.
High Temperature
During summer, Baby's tears should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the color of the leaves becomes lighter, and the plant becomes more susceptible to sunburn.
Solutions
Trim away the sunburned and dried-up parts. Move the plant to a location that provides shade from the midday and afternoon sun. Water the plant in the morning and evening to keep the soil moist.
Discover information about plant diseases, toxicity, weed control and more.
Transplant spacing
How to Successfully Transplant Baby's tears?
The ideal time to transplant baby's tears is between late spring and late summer when growth is most vigorous. Choose a partially to fully shaded location to meet its light requirements. When transplanting, ensure proper soil drainage to avoid root rot and create a thriving environment.
What Preparations are Needed Before Transplanting Baby's tears?
What is the Ideal Time for Transplanting Baby's tears?
Transferring baby's tears is fantastic from late spring to early fall, the warmth during these seasons boosts healthy growth. You'll reap benefits of robust foliage and vibrant greenery. Remember, the ideal transplanting moment is everything for baby's tears's success!
How Much Space Should You Leave Between Baby's tears Plants?
For transplanting your lovely baby's tears, make sure to space them about 3-6 inches (7.5-15 cm) apart. This will give them enough room to grow and flourish, without competing for resources.
What is the Best Soil Mix for Baby's tears Transplanting?
To prepare the perfect soil for your baby's tears, opt for a well-draining potting mix with added humus. Before planting, mix in a slow-release granular fertilizer to support their growth.
Where Should You Relocate Your Baby's tears?
When selecting a spot to transplant your baby's tears, choose a location with partial shade or dappled sunlight. Too much direct sun can scorch their delicate leaves, but they still need some light to grow properly.
What Equipments Should You Prepare Before Transplantation Baby's tears?
Gardening Gloves
To protect your hands while dealing with the soil and plant.
Shovel or Spade
Useful for digging the hole in the ground where the baby's tears will be transplanted, and for removing the plant from its original location.
Watering Can
To keep the plant and soil adequately hydrated during the transplant process.
Mulch
Helps retain soil moisture and suppress weed growth.
Label and Marker
To label the plant with the date of transplanting and other important details.
How Do You Remove Baby's tears from the Soil?
Prepare your planting hole before removing the baby's tears from its current container to minimize the time the roots are exposed. The hole should be twice as wide as the root ball but just as deep. Fill the hole with water and wait till it drains.
Place the baby's tears plant in the center of the hole gently. The top of the root ball should be equal to or slightly below the level of the surrounding soil.
Fill the hole with soil, firming it gently around the base of the baby's tears plant to make sure there are no air pockets.
Water the baby's tears plant generously to help settle the soil around the roots. Use a watering can to tease the water into the planting area, ensuring a good contact between the roots and soil.
Apply a thin layer of mulch around the baby's tears, but not touching the plant's stem, to help retain moisture and suppress weed growth.
Step-by-Step Guide for Transplanting Baby's tears
Step1 Prep Work
Prepare your planting hole before removing the baby's tears from its current container to minimize the time the roots are exposed. The hole should be twice as wide as the root ball but just as deep. Fill the hole with water and wait till it drains.
Step2 Placement
Place the baby's tears plant in the center of the hole gently. The top of the root ball should be equal to or slightly below the level of the surrounding soil.
Step3 Filling in
Fill the hole with soil, firming it gently around the base of the baby's tears plant to make sure there are no air pockets.
Step4 Watering
Water the baby's tears plant generously to help settle the soil around the roots. Use a watering can to tease the water into the planting area, ensuring a good contact between the roots and soil.
Step5 Mulching
Apply a thin layer of mulch around the baby's tears, but not touching the plant's stem, to help retain moisture and suppress weed growth.
How Do You Care For Baby's tears After Transplanting?
Observation
Keep a close eye on your baby's tears to look for signs of transplant shock, like wilting, yellowing, or dropped leaves. If spotted, move the plant to a cooler spot in the garden and maintain regular watering.
Pruning
If possible, trim back the baby's tears by about one-third after transplanting. This reduces strain on the roots and helps the plant recover more quickly.
Continual Watering
While the baby's tears is establishing, ensure it has plenty of water. However, take care not to overwater by checking soil moisture levels before watering.
Protection
Consider using a protective netting or cover to protect your newly transplanted baby's tears from pests and extreme climate conditions.
Troubleshooting Common Issues with Baby's tears Transplantation.
When's the most appropriate time to transplant baby's tears?
You can transplant baby's tears from the tail end of spring through to the latter part of summer for the best results.
How far apart should I space baby's tears when transplanting?
When transplanting, allow for a distance of about 3-6 inches (7.6-15.2 cm) between each baby's tears plant. This promotes healthy growth.
What type of soil does baby's tears prefer?
Baby's tears appreciates well-draining soil rich in organic matter. You can add compost or aged manure to enhance soil fertility.
How often should I water baby's tears after transplanting?
Water baby's tears thoroughly after transplanting. Afterwards, maintain slightly moist soil. Bear in mind, overwatering can lead to root rot.
What kind of light conditions does baby's tears need after being transplanted?
Baby's tears thrives in bright, indirect light. After transplanting, place it in a location where it receives filtered sunlight.
Why are my transplanted baby's tears plants wilting?
Wilting in baby's tears may be a sign of transplant shock due to sudden changes or root disturbances. Keep it well-watered and in favorable light conditions.
How deep should the transplant hole be for baby's tears?
The transplant hole for baby's tears should be deep enough to accommodate the root ball. Don't bury it deeper than its previous soil level.
What is the ideal temperature for baby's tears after transplanting?
Provide baby's tears with moderate temperatures around 65-75 degrees Fahrenheit (18-24 degrees Celsius) after transplantation for healthy growth.
Why are the leaves of my transplanted baby's tears turning yellow?
Yellowing leaves could be due to overwatering, inadequate light, or a nutrient deficiency. Adjust the care regimen accordingly to restore baby's tears's natural color.
How to ease transplant shock for baby's tears?
To ease transplant shock, avoid disturbing baby's tears's roots during transplant. Also, water it well post-transplant and maintain it in a well-lit, temperate environment.
Discover information about plant diseases, toxicity, weed control and more.
1 / 5
