Without proper watering, this beautiful ornamental grass will underperform. In the ground, watering issues can be solved, but In a container, too much or too little water will kill Prairie wedgescale in short order. When Prairie wedgescale isn't receiving the right amount of water, it may stop growing. In the case of overwatering, it will begin to display yellow leaves with brown tips. Underwatering can produce drooping leaves, weak seed head production, and browned leaves. If you suspect your Prairie wedgescale has been improperly watered, the first thing to do is figure out if the problem is too much or too little. If your Prairie wedgescale is getting too much water, stop watering it immediately. Sometimes it can take weeks for heavy soils to dry out, so be patient. At the first sign of new growth, test the soil for moisture and decide whether it needs more water or not. The solution for Prairie wedgescale receiving too little water is even simpler: give the grasses a nice, deep drink and see if it perks up. Bearing all of this in mind, remember that a long, deep watering is always better than a lot of shallow, frequent waterings. The reason for this is that deep watering encourages grasses to grow deep roots, which makes them more drought resistant and less prone to problems from watering.

The watering needs of Prairie wedgescale will vary depending on where it is planted. Generally, you should water this grass every week. In hot climates, once or twice a week watering in the summer may be necessary. In moderate climates, watering once every seven days or more may be enough. Grass in containers almost always need more frequent watering than grasses in the ground. But with a species such as this that can thrive in full sun or part shade, the location also matters. Shaded grasses need to be watered less frequently than in-ground grasses. Prairie wedgescale should only be watered when the soil is dry. If you’re unsure when to water, there are a few key signs you can use as your cue. Pressing your finger a couple of inches into the soil will tell you if the soil is dry. For a potted grass, you can weigh the grass with a portable scale to see how light it is, but you can also quickly feel when the pot is light from lack of water. Like many types of grass, the blades may appear folded along their centers and thinner than usual when the roots lack sufficient water. Despite its drought tolerance, regular, deep waterings will reward you with a beautiful color. In the wild, Prairie wedgescale grows in open scrubland, where it would be subject to extreme heat, loads of bright sun, and intermittent rain. Because this grass is drought resistant, you might expect never to need to water it. But don’t let its hardiness fool you, Prairie wedgescale still needs care and attention. Even though this hardy grass can handle harsh, dry conditions, gardeners agree that it thrives best with consistent water. When first planted, Prairie wedgescale will need more frequent water until it has established deep roots. For Prairie wedgescale in pots, the soil will dry out quickly, especially if the pot is in hot, direct sun for a large part of the day. Test the soil every 3 to 4 days and water only when it feels dry. Prairie wedgescaleed in the ground generally needs less watering, but that depends on the soil it is grown in. Heavy clay soil holds water for a long time and may feel dry at the surface while still retaining plenty of moisture below the ground. Sandy soils that drain quickly will need to be watered more often.

You can often tell if you are watering enough by the rate of growth of your grasses. Prairie wedgescale during the hottest months of the year and has been known to double in size in a year’s time. If the weather is hot and the grass is not growing vigorously, you may need to adjust your watering schedule. In winter, you might be able to get away with watering only once a month, but you will still want to touch the soil to test for moisture. During a growth cycle (in the warmest months), the grass will need more water than usual. But during winter and cooler months, the need for water will be dramatically reduced. The most important thing to remember about Prairie wedgescale is that the soil it is planted in should always be allowed to dry out completely before adding water.

Although this plant doesn’t particularly like a lot of light, it does need some throughout the day to photosynthesize and therefore grow properly. Full shade plants like Prairie wedgescale don’t need a full eight hours of sunlight per day, but they do need access to at least six hours of indirect sunlight every day in order to grow at a healthy rate.

Prairie wedgescale is a shade-loving plant that requires lots of shade. During the hottest parts of the day, this plant needs to be protected from direct sunlight; however, it can tolerate partial sun during other parts of the day. Morning sun is ideal for Prairie wedgescale, but it can tolerate small amounts of afternoon sun if it’s not too hot in one spot for the entire afternoon and evening.

There are a few tricks to planting Prairie wedgescale that can prevent you from having to take extra measures to protect it from direct sun. You can try strategic shade planting using buildings or trees to plan where to plant, or even layer using taller plants that can tolerate bright, direct light all day. Otherwise, you can try using shade cloth to build a sunshade over your Prairie wedgescale facing toward the sun during the hottest parts of the day.

Unfortunately, too little sunlight is still possible, even though this plant loves the shade. You might notice leaves straining to grow towards better-lit areas, leaves that grow progressively smaller, and even generally-stunted growth. In these cases, you can try moving Prairie wedgescale if it’s in a pot, or move other foliage out of the way so that some of the sunlight can reach into your Prairie wedgescale.

Prairie wedgescale can be damaged fairly easily from sunlight overexposure. When its leaves are exposed to bright, direct sunlight for multiple hours per day in the same spots, you may begin to notice some yellowing and/or brown discoloration at the leaf tips. The leaves in heavily burned spots may also start to curl under or in. These are signs that your Prairie wedgescale is being cooked in the sun, and needs a little bit more shade to be happy.

In some climates, sunlight for plants coming out of dormancy may be a bit much. When your Prairie wedgescale is in its early stages for the year, it shouldn’t be exposed to much sunlight. The new, tender leaves are far more susceptible to sunburn than mature ones, so be sure to shade your plants properly if they aren’t already protected from direct rays of sunlight. It’s important to keep the first foliage intact, as this will be the primary source of energy the plant as it puts on new growth for the year!

Prairie wedgescale prefers cooler weather, and has a specific temperature range you can keep it within to maximize growth. For Prairie wedgescale to be as healthy as it possible can, you could keep them between the temperatures 65~75℉(18~25℃). Prairie wedgescale can handle higher and lower heat levels, but whenever possible, try to keep the area you grow them in within several degrees of 65~75℉(18~25℃). If you can’t keep Prairie wedgescale precisely within that range, it doesn’t mean they will stop growing. Prairie wedgescale can handle a higher and lower range before they begin to suffer damage or reduced growth. On the higher end, that temperature would that would fall between 75~85℉(25~30℃). On the lower end, Prairie wedgescale can handle temperatures as low as 5℉(-15℃). The higher temperature range is the most important to observe, as Prairie wedgescale prefers cooler environments. Letting temperatures get above the upper range may cause growth to slow, and having Prairie wedgescale above 85℉(30℃) could result in the plant dying.

Too much heat early in the growing stages of Prairie wedgescale may give it an unhealthy appearance, so it's important to keep your growing space between 65~75℉(18~25℃). You’ll want to stay in the colder part of this range as Prairie wedgescale, but make sure not to go below -5℉(-20℃). Extremely cold temperatures can hinder growth at any stage for Prairie wedgescale, though they aren’t nearly as damaging as extremely hot temperatures. If temperatures are kept high during the budding stage, Prairie wedgescale may not flower at all.

Tip #1: Grow in the Coldest Room of Your Home If you plan to grow Prairie wedgescale indoors, make sure to choose the coldest room of your home. This will usually be on the side of your house that doesn’t experience the harsh heat that the sun can produce in the middle of the day. At the same time, you’ll need to ensure the room does get a healthy amount of sunlight. While you’ll want to spare your plants from the brightest and hottest part of the day, zero sunlight can drastically reduce Prairie wedgescale ability to grow. Tip #2: If Prairie wedgescale Doesn’t Flower Properly, It May Be Too Hot The growing season for Prairie wedgescale, spring and early summer, can occasionally come with high temperatures. These fluctuations can negatively affect the growing stage of Prairie wedgescale, causing flowering buds to change into non-flowering buds. These buds will open partially, or in some cases not at all, causing Prairie wedgescale to lose some of its aesthetic quality. It's important to stay in the range of 65~75℉(18~25℃), for that reason, so your Prairie wedgescale can flower to its full potential. Tip #3: Avoid Frost While Prairie wedgescale can tolerate lower temperatures, as low as -5℉(-20℃), it will not do well if it encounters significant frost. If left out in the colder temperatures of late fall or winter, Prairie wedgescale will begin to show the signs of frost damage. To recognize the signs of frost damage, you’ll look for several key aesthetic changes. First, parts of Prairie wedgescale will begin to wilt. Then, those sections will start to become discolored, eventually turning brown or black as they die. Any parts of Prairie wedgescale that turn these colors cannot be saved, and will have to be pruned if you intend to keep the plant alive.

It's important to keep the temperature of your growing area steady regardless of season. If you live in an area with harsh winters or very hot summers, it may be best to put your plants inside. That way, you can keep them in a cool room where Prairie wedgescale would be able to grow in the best possible conditions. If you do leave your plants outside, make sure to observe the temperature closely. If the summer’s get especially hot in your climate-zone, make sure that your plants aren’t exposed to temperatures above 85℉(30℃). This will dehydrate and damage Prairie wedgescale quickly, and before long, they will begin to die.

If you intend to place Prairie wedgescale outside, you’ll want to make sure that it has shade from the heat of the midday sun. While Prairie wedgescale does need plentiful sunlight to grow to its full potential, direct sunlight can cause a rise in temperature and damage certain elements of the plant. Choose an area that has shade providing structures or tall trees that can shield Prairie wedgescale from the hottest parts of the day. If your climate isn’t appropriate for Prairie wedgescale or you don’t have the proper space in your garden, you can also plant them inside. Controlling the temperature is much easier indoors, and having proper fans, ventilation, or an A/C unit will allow you to stay within the optimum range of 65~75℉(18~25℃).