About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
Distribution
More Info
Related Plants
Related Articles
Add to My Garden Ohio spiderwort
Tradescantia ohiensis
Also known as : Widow's tears
Tradescantia ohiensis is named after John Tradescant (1608 - 1662), the gardener to King Charles 1. This cheerful blue flowering plant is common along roadsides, in ditches and makes a great addition to any garden. It has a unique tendency to bloom in the morning and then close in the afternoon sun.
Hardiness Zones
4 to 9
Care Guide for Ohio spiderwort
Although the Ohio spiderwort can survive in dry soils, it prefers moist soil. You should add enough water to moisten the soil, but err on the side of adding too little water rather than too much. Allow the soil to drain before another watering. The roots will rot in standing water.
Compost is a good option for fertilizing outdoor ohio spiderwort plants, although they can grow well on their own in rich soil. Add this fertilizer once during the spring to ensure strong growth. Potted plants can be fertilized with a liquid fertilizer once a month during the spring and summer months.
Trim the diseased, withered leaves once a month.
Sand, Loam, Clay, Chalky, Sandy loam, Acidic, Neutral
Needs excellent drainage in pots.
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Scan QR code to download
Ohio spiderwort
Water
Every week
Sunlight
Full sun
Hardiness Zones
4 to 9
Download and print this plant care card and attach it to your plants
Download
Ohio spiderwort
Water
Every week
Sunlight
Full sun
Hardiness Zones
4 to 9
Download
Ohio spiderwort
Water
Every week
Sunlight
Full sun
Hardiness Zones
4 to 9
Download
Questions About Ohio spiderwort
Watering 
Pruning 
Sunlight 
Temperature 
Fertilizing What is the best way to water my Ohio spiderwort?
When watering the Ohio spiderwort, you should aim to use filtered water that is at room temperature. Filtered water is better for this plant, as tap water can contain particles that are harmful to its health. The reason that the water should be at room temperature or slightly warmer is that the Ohio spiderwort comes from a warm environment, and cold water can be somewhat of a shock to its system. Also, you should avoid overhead watering for this plant, as it can cause foliage complications. Instead, simply apply your filtered room temperature water to the soil until the soil is entirely soaked. Soaking the soil can be very beneficial for this plant as it moistens the roots and helps them continue to spread through the soil and collect the nutrients they need.
Read More ![more]()
What should I do if I water my Ohio spiderwort too much or too little?
Both overwatering and underwatering will be detrimental to the health of your Ohio spiderwort, but overwatering is a far more common issue. When this species receives too much water, its stems and leaves may begin to wilt and turn from green to yellow. Overwatering over a prolonged period may also lead to diseases such as root rot, mold, and mildew, all of which can kill your plant. Underwatering is far less common for the Ohio spiderwort, as this plant has decent drought tolerance. However, underwatering remains a possibility, and when it occurs, you can expect to find that the leaves of your Ohio spiderwort have become brittle and brown.
It is crucial that you notice the signs of overwatering as soon as possible when caring for your Ohio spiderwort. Some of the diseases that arise from overwatering, such as root rot, may not be correctable if you wait too long. If you see early signs of overwatering, you should reduce your watering schedule immediately. You may also want to assess the quality of soil in which your Ohio spiderwort grows. If you find that the soil drains very poorly, you should replace it immediately with a loose, well-draining potting mix. On the other hand, if you find signs that your Ohio spiderwort is receiving too little water, all you need to do is water more regularly until those signs have subsided.
Read More ![more]()
How often should I water my Ohio spiderwort?
If your plant is in a pot. The most precise way to decide whether your Ohio spiderwort needs water is to plunge your finger into the soil. If you notice that the first two to three inches of soil have become dry, it is time to add some water.
If you grow your Ohio spiderwort outdoors in the ground, you can use a similar method to test the soil. Again, when you find that the first few inches of soil have dried out, it is time to add water. During the spring and early fall, this method will often lead you to water this plant about once every week. When extremely hot weather arrives, you may need to increase your watering frequency to about twice or more per week. With that said, mature, well-established the Ohio spiderwort can show an admirable ability to withstand drought.
Read More ![more]()
How much water does my Ohio spiderwort need?
When it comes time to water your Ohio spiderwort, you should not be shy about how much water you give. With the first two to three inches of soil dry, this plant will appreciate a long and thorough watering. Supply enough water to soak the soil entirely. The amount of water you add should be enough to cause excess water to flow through the drainage holes at the bottom of your pot. If you don’t see excess water draining from the pot, you have likely underwatered your plant. But do not let the water accumulate inside the soil, which will be very dangerous to the plant as well. Alternatively, a lack of water draining through the pot could indicate poorly draining soils, which is detrimental to the health of this plant and should be avoided. If the plant is outside, 1 inch of rain per week will be sufficient.
Read More ![more]()
How should I water my Ohio spiderwort at different growth stages?
The water needs of the Ohio spiderwort can change depending on growth stages as well. For example, when your Ohio spiderwort is in the first few years of its life, or if you have just transplanted it to a new growing location, you will need to give more water than usual. During both of those stages, your Ohio spiderwort will put a lot of energy towards sprouting new roots that will then support future growth. For those roots to perform their best, they need a bit more moisture than they would at a more mature phase. After a few seasons, your Ohio spiderwort will need much less water. Another growth stage in which this plant may need more water is during the bloom period. Flower development can make use of a significant amount of moisture, which is why you might need to give your Ohio spiderwort more water at this time.
Read More ![more]()
How should I water my Ohio spiderwort through the seasons?
The Ohio spiderwort will have its highest water needs during the hottest months of the year. During the height of summer, you may need to give this plant water more than once per week, depending on how fast the soil dries out. The opposite is true during the winter. In winter, your plant will enter a dormant phase, in which it will need far less water than usual. In fact, you may not need to water this plant at all during the winter months. However, if you do water during winter, you should not do so more than about once per month. Watering too much at this time will make it more likely that your Ohio spiderwort will contract a disease.
Read More ![more]()
What's the difference between watering my Ohio spiderwort indoors and outdoors?
It is most common to grow the Ohio spiderwort indoors for any gardener that does not live in temperate and tropical regions. Those gardeners should consider the fact that soil in a container can dry out a bit faster than ground soil. Also, the presence of drying elements such as air conditioning units can cause your Ohio spiderwort to need water on a more frequent basis as well. if you planted it outside. When that is the case, it’s likely you won’t need to water your Ohio spiderwort very much at all. If you receive rainfall on a regular basis, that may be enough to keep your plant alive. Alternatively, those who grow this plant inside will need to water it more often, as allowing rainwater to soak the soil will not be an option.
Read More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
More Questions People Also Ask
More About How-Tos
Explore 5 of plant how-tos on Feng shui direction, Water, Lighting, Temperature, Transplant, etc.
Feng shui direction
North
Within the realm of Feng Shui, ohio spiderwort has subtle harmonious vibrations that are particularly effective in a north-facing direction. This is due to the robust energy that ohio spiderwort emanates, complimenting the tranquil element of water symbolized by the North direction. However, bear in mind, the unique interaction between ohio spiderwort and its environment is subject to various interpretations, respecting the subjective nature of Feng Shui.
Water
Every week
Lighting
Full sun
The ohio spiderwort has a strong preference for areas which receive light for most of the day. It can also grow well in locations that have a reduced exposure to sunlight. The plant's native habitat is open clearings which tend to have ample light. Inadequate light can stymie the plant's growth while excessive light might cause leaf scorching.
Temperature
0 38 ℃
Ohio spiderwort is naturally adapted to medium warm conditions, thriving in temperatures from 68 to 95 °F (20 to 35 ℃). To ensure its healthy growth especially in extreme climates, seasonal adjustment of its environment might be crucial.
Transplant
1-2 feet
Ohio spiderwort can successfully be transplanted from late spring to mid-summer (consider this S2-S4). Its preference for full to partial sunlight, combined with moist and loamy soil, ensures optimum growth. When moving this robust perennial, remembering not to plant too deep helps maintain its overall health.
Common Pests & Diseases
Common issues for Ohio spiderwort based on 10 million real cases
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Leaf tips withering
Low air humidity can cause the edges of the leaves to dry out.
Solutions: If your plant has only a few dried tips, complete the following: Increase humidity. Increase the humidity around your plant by misting it with a spray bottle daily. Alternatively, you can use a humidifier. Water plant. If your soil is dry, water until the soil is moist but not damp. Water again when soil dries out. If a large portion of the leaves is suffering from dry tips, complete the following: Prune away affected tissue. Using sharp and clean pruning shears, remove the dried out tips using clean cuts to avoid harming healthy tissue. Plant tissue will heal on its own, but you can apply a pruning seal for extra protection.
Wilting after blooming
Flowers may wither for a variety of reasons.
Solutions: Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water. Water according to recommendations for each plant's species. Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too. Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants. Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.
Solutions: For less serious cases: Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread. To treat more serious infestations: Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions. Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Leaf tips withering
Low air humidity can cause the edges of the leaves to dry out.
Symptom Analysis
The tips and the edges of the plants’ leaves are dried out and brown. They may be crunchy when touched. This is caused by low humidity and/or a lack of water.
Solutions
If your plant has only a few dried tips, complete the following:
- Increase humidity. Increase the humidity around your plant by misting it with a spray bottle daily. Alternatively, you can use a humidifier.
- Water plant. If your soil is dry, water until the soil is moist but not damp. Water again when soil dries out.
If a large portion of the leaves is suffering from dry tips, complete the following:
- Prune away affected tissue. Using sharp and clean pruning shears, remove the dried out tips using clean cuts to avoid harming healthy tissue. Plant tissue will heal on its own, but you can apply a pruning seal for extra protection.
Prevention
Many houseplants come from moist tropical areas with high humidity.
To prevent dry and brown tips, you should complete the following:
- Water regularly. Water when soil is dry.
- Keep humidity high. Keep moisture high by regularly misting the air or using a humidifier.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Wilting after blooming
Flowers may wither for a variety of reasons.
Overview
Wilting after blooming is sometimes a natural aging process of the flower, while other times it may indicate a problem. Orchids, for example, can bloom for anywhere from two weeks to three months, so wilting after a few days signals a problem for most varieties. This can happen to virtually any ornamental flowering plant, but those with shallow roots and limited tolerance for drought, full sun, and low humidity are more susceptible.
This is a common problem, and often has an easy fix. Sometimes, however, it is the result of more serious causes such as pests or disease of the root system.
Symptom Analysis
- At first, flowers may look a little limp.
- Petals may start to appear dried out and turn brown.
- Eventually they may drop off the plant all together.
Disease Cause
Wilting blooms can be a sign of an unhealthy root system. Any condition that prevents the plant from absorbing enough water and nutrition can result in wilting blooms and sometimes other symptoms. If the plant doesn’t have enough water, it cannot maintain appropriate pressure within stems, leaves, and blooms, causing them to wilt.
This can result from physical damage – for example from root breakage during re-potting or attack by insects like cutworms. If you recently re-potted your plant, physical damage to the roots is a likely cause. If you see insects, they may be eating leaves, roots, or flowers. Fungal infections can also cause root rot and damage, preventing water and nutrient uptake.
Finally, wilting blooms can result simply from age. If no other symptoms are visible, it may simply signal the natural end of the flower’s lifespan. If it seems premature, this may be caused by environmental factors: water, humidity, light, or stress. Under-watering is a common cause. Similarly, plants adapted to high humidity dry out easily when humidity is low, like during winter or in dry climates. Too much light can also stress plants that need shade, causing blooms to wilt.
Solutions
- Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water.
- Water according to recommendations for each plant's species.
- Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too.
- Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants.
- Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Prevention
- Read up on moisture, light, and soil type preferences for each plant to avoid underwatering, incorrect light levels, or other conditions that can cause wilting blooms.
- Avoid re-potting during the flowering period. This causes additional stress on the plants because they need to repair root damage and adapt to the new micro-environment, all of which can result in wilting.
- One other potential cause is ethylene gas, a plant hormone related to ripening. Some fruits and vegetables emit ethylene, especially bananas. Apples, grapes, melons, avocados, and potatoes can also give it off, so keep flowering plants away from fresh produce.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.
Overview
Leaf beetles range in size from 1.5 mm to 2 cm. Both adult beetles and their larvae eat the leaves of many different types of plants. There are over 35,000 different species of leaf beetles, in a variety of colors including gold, green, yellow-striped, and red striped. Some of these have been mistaken for ladybirds because of their shape and coloring. They can be oval, round, or elongated in shape. These insect pests are most active in spring and summer.
If not controlled, leaf beetles can do a lot of damage to vegetable crops and ornamental plants. They feed on the leaves, flowers, stems, roots, and fruits of different plants. They can fly, which means it's easy for them to move from one plant to another. Some species of leaf beetles only target one specific crop, while others will target many different types of plants. Although a lot of the damage that they cause is cosmetic, an infestation can weaken a plant and leave it prone to other more problematic diseases.
Symptom Analysis
The first signs of a leaf beetles infestation are small visible holes in leaves. Leaves then become discolored and dark beetle droppings can be seen. As the leaves turn yellow and brown, they will drop off the plant onto the ground. Some leaves will appear skeletonized with only the veins still remaining.
Infestation begins in spring, when the adult beetles emerge from the soil and lay their eggs on the leaves of plants. When these eggs hatch, the young nymphs start munching on the leaves as they grow up. Once leaf beetles are large and mature, they'll fall to the ground and pupate in the soil over winter before starting the cycle all over again.
Leaf beetles also eat holes in fruits and vegetables. These can be seen as small round holes that sometimes have a larger brown area surrounding them.
Solutions
For less serious cases:
- Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread.
To treat more serious infestations:
- Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions.
- Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.
Prevention
To prevent infestations of leaf beetles, follow these practices.
- Regularly check for beetles. To prevent large pest infestations, be proactive about frequently checking plants for pests and removing them quickly.
- Clear debris. Clear weeds and debris to remove areas where these beetles may overwinter and hide.
- Attract natural predators. Birds and other insects, such as wasps and ladybugs, are effective natural predators of leaf beetles. Encourage them to visit by including a diverse array of plants to provide habitat and food. Also, avoid applying broad-spectrum herbicides that can harm and kill beneficial insects.
- Plant aromatic herbs like mint, garlic, or rosemary, as these can repel leaf beetles.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Distribution Map
Habitat
Roadsides, along railroads, fields, thickets
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info
Plant Type
Herb
Flower Color
Blue
Purple
White
Red
Bloom Time
Late spring, Summer
Name story
Ohio spiderwort
Some believe that it is called spiderwort for those angular leaves and stems which resemble spider legs. Others say it is due to the strands of sap the plant secreted whenever it is cut or injured, manifesting the appearance of spider webs. In fact, the specific epithet ohiensis, actually holds the meaning 'of' or 'from Ohio'. Therefore, it is called Ohio spiderwort.
Symbolism
Respect
Usages
Environmental Protection Value
Tradescantia ohiensis can absorb dust and monitor pollution.
Garden Use
Ohio spiderwort is a species of flowering perennial which is planted in gardens for its beautiful flowers, adaptability to various growing conditions, and resistance to pests and disease. It is usually found in flowerbeds, floral borders, and meadow gardens.
Scientific Classification
Phylum
Vascular plants Class
Monocotyledons Order
Spiderworts and allies Family
Spiderwort Genus
Spiderworts Species
Ohio spiderwort 
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Related Plants
Kangaroo apple
Kangaroo apple (Solanum laciniatum) is a fast growing tree that can grow from 91 to 183 cm tall. It blooms from winter to spring with mauve flowers. Produces a yellowish green drupe fruit that is not edible. It thrives in full sun with moist, well-drained soil. It is not drought tolerant and needs regular watering.
Bloom Time
Spring, summer
Chinese hat plant
The Holmskioldia sanguinea originates from the Himalayas. It is also called the chinese hat plant and other similar names, and is cultivated as an ornamental and decorative plant in many other places including South Asia, Mexico and Hawaii.
Bloom Time
All year around
Big-Bract Verbena
Big-Bract Verbena (Verbena bracteata) is a perennial wildflower that attracts bees and butterflies. Considered a weed by some, but can make a nice ground covering. It blooms from summer to fall with small pink, white, red, blue, lavender, or purple flowers. Commonly found growing along roadsides and disturbed areas.
Bloom Time
Spring, Summer, Autumn
Garden Usage
Thebig-Bract Verbena is a perennial flowering herb that looks beautiful in garden beds and borders. Although it is a reasonably hardy plant once mature, it does need a consistent level of care, so it may not be suitable for beginners. Recognized by its vibrant green foliage and delicate blooms, the big-Bract Verbena is loved by many because it attracts butterflies and bees.
Woodland sunflower
The woodland sunflower is an herbaceous perennial flower in the Helianthus divaricatus family. These showy yellow flowers thrive in part sun to full sun and hybridize easily. They spread through creeping rhizomes and seeds and may become invasive. The seeds are an excellent source of food for wild birds.
Bloom Time
Summer, autumn
Garden Usage
Sunflowers belong to the genus Helianthus, of the Asteraceae family. They are summer flowering herbs with bright and beautiful flowers. There are many stunning varieties of sunflower. They are happy growing in containers or in borders. They can also be harvested to make excellent cut flowers. Sunflowers prefer a warm and sunny position. They have simple soil requirements and are easy to care for.
Congo fig
A member of the fig family, congo fig can be grown as an annual or as an easy-care houseplant. This plant self-sows readily. Seeds can be found sprouting in the pots of other houseplants.
Bearded beggarticks
Part of the sunflower family the Bidens aristosa is also referred to as the bearded beggarticks. This herb can often reach up to 1.5 m in height. The plant produces solitary flower heads with bright yellow color in fall with each being 2.5 to 5 cm across. It mainly used for landscape beautification.
Bloom Time
Summer, autumn
View More Plants
Related Articles
Useful Tips
Most Common Herb
Plant Collection Most Common Herb Fragrant plantain lily See More The trademark feature of Asia-native plantain lilies is the numerous glossy oval leaves with deep parallel veins. The Fragrant plantain lily is additionally decorated with strongly fragrant, trumpet-shaped, large white flowers, which are unique in the genus. Hosta plantaginea is one of the favorite cultivatedContinue reading “Most Common Herb”
Read More ![more]()
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow Orange daylily See More The Orange daylily is a perennial plant known for its captivating lily-like blooms. Its natural habitats are meadows and forests, but it is also a common garden plant in temperate regions around the world. Each individual flower lasts only a day, but the plantContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Best Perennial Plant to Grow
Plant Collection Best Perennial Plant to Grow China rose See More The China rose (Rosa chinensis) is a Southwest China native. The plant has been cultivated for so long that it has become hard to tell the difference between wild and cultivated varieties. With medium-sized clusters of flowers and a long blooming season, it isContinue reading “Best Perennial Plant to Grow”
Read More ![more]()
Useful Tips
Most Common Herb
Plant Collection Most Common Herb Golden pothos See More The Golden pothos is a popular flowering house plant that’s commonly seen in Australia, Asia, and the West Indies. It goes by many nicknames, including “devil’s ivy,” because it is so hard to kill, and can grow in the dark. Golden pothos has poisonous sap, soContinue reading “Most Common Herb”
Read More ![more]()
View More Articles
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
Distribution
More Info
Related Plants
Related Articles
Add to My Garden Ohio spiderwort
Tradescantia ohiensis
Also known as: Widow's tears
Tradescantia ohiensis is named after John Tradescant (1608 - 1662), the gardener to King Charles 1. This cheerful blue flowering plant is common along roadsides, in ditches and makes a great addition to any garden. It has a unique tendency to bloom in the morning and then close in the afternoon sun.
Hardiness Zones
4 to 9
Care Guide for Ohio spiderwort
Water
Although the Ohio spiderwort can survive in dry soils, it prefers moist soil. You should add enough water to moisten the soil, but err on the side of adding too little water rather than too much. Allow the soil to drain before another watering. The roots will rot in standing water.
Fertilization
Compost is a good option for fertilizing outdoor ohio spiderwort plants, although they can grow well on their own in rich soil. Add this fertilizer once during the spring to ensure strong growth. Potted plants can be fertilized with a liquid fertilizer once a month during the spring and summer months.
Pruning
Trim the diseased, withered leaves once a month.
Soil
Sand, Loam, Clay, Chalky, Sandy loam, Acidic, Neutral
Potting Suggestions
Needs excellent drainage in pots.
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
Download
Questions About Ohio spiderwort
Watering Pruning Sunlight Temperature Fertilizing What is the best way to water my Ohio spiderwort?
What should I do if I water my Ohio spiderwort too much or too little?
How often should I water my Ohio spiderwort?
How much water does my Ohio spiderwort need?
How should I water my Ohio spiderwort at different growth stages?
Show More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
Download the App
More Questions People Also Ask
More About How-Tos
Common Pests & Diseases
Common issues for Ohio spiderwort based on 10 million real cases
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More ![more]()
Leaf tips withering
Low air humidity can cause the edges of the leaves to dry out.
Solutions: If your plant has only a few dried tips, complete the following: Increase humidity. Increase the humidity around your plant by misting it with a spray bottle daily. Alternatively, you can use a humidifier. Water plant. If your soil is dry, water until the soil is moist but not damp. Water again when soil dries out. If a large portion of the leaves is suffering from dry tips, complete the following: Prune away affected tissue. Using sharp and clean pruning shears, remove the dried out tips using clean cuts to avoid harming healthy tissue. Plant tissue will heal on its own, but you can apply a pruning seal for extra protection.
Learn More ![more]()
Wilting after blooming
Flowers may wither for a variety of reasons.
Solutions: Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water. Water according to recommendations for each plant's species. Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too. Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants. Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Learn More ![more]()
Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.
Solutions: For less serious cases: Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread. To treat more serious infestations: Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions. Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.
Learn More ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
- Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
- Placement is often random and scattered as diseases are spread through raindrops.
- May appear on lower leaves and the interior of the plant where humidity is higher.
- Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
- Leaf margins may turn yellow.
- Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
- Blotches grow in size until the entire leaf is brown.
- The leaf falls off the plant.
Severe Symptoms
- Partial or complete premature defoliation
- Reduced growth
- Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
- Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
- Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
- Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
- Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
- Maintain good air movement between plants through proper plant spacing.
- Increase air circulation through the center of plants through pruning.
- Thoroughly clean all pruning tools after working with diseased plants.
- Never dispose of disease plant material in a compost pile.
- Avoid overhead watering to keep moisture off of the foliage.
- Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Leaf tips withering
Low air humidity can cause the edges of the leaves to dry out.
Symptom Analysis
The tips and the edges of the plants’ leaves are dried out and brown. They may be crunchy when touched. This is caused by low humidity and/or a lack of water.
Solutions
If your plant has only a few dried tips, complete the following:
- Increase humidity. Increase the humidity around your plant by misting it with a spray bottle daily. Alternatively, you can use a humidifier.
- Water plant. If your soil is dry, water until the soil is moist but not damp. Water again when soil dries out.
If a large portion of the leaves is suffering from dry tips, complete the following:
- Prune away affected tissue. Using sharp and clean pruning shears, remove the dried out tips using clean cuts to avoid harming healthy tissue. Plant tissue will heal on its own, but you can apply a pruning seal for extra protection.
Prevention
Many houseplants come from moist tropical areas with high humidity.
To prevent dry and brown tips, you should complete the following:
- Water regularly. Water when soil is dry.
- Keep humidity high. Keep moisture high by regularly misting the air or using a humidifier.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Wilting after blooming
Flowers may wither for a variety of reasons.
Overview
Wilting after blooming is sometimes a natural aging process of the flower, while other times it may indicate a problem. Orchids, for example, can bloom for anywhere from two weeks to three months, so wilting after a few days signals a problem for most varieties. This can happen to virtually any ornamental flowering plant, but those with shallow roots and limited tolerance for drought, full sun, and low humidity are more susceptible.
This is a common problem, and often has an easy fix. Sometimes, however, it is the result of more serious causes such as pests or disease of the root system.
Symptom Analysis
- At first, flowers may look a little limp.
- Petals may start to appear dried out and turn brown.
- Eventually they may drop off the plant all together.
Disease Cause
Wilting blooms can be a sign of an unhealthy root system. Any condition that prevents the plant from absorbing enough water and nutrition can result in wilting blooms and sometimes other symptoms. If the plant doesn’t have enough water, it cannot maintain appropriate pressure within stems, leaves, and blooms, causing them to wilt.
This can result from physical damage – for example from root breakage during re-potting or attack by insects like cutworms. If you recently re-potted your plant, physical damage to the roots is a likely cause. If you see insects, they may be eating leaves, roots, or flowers. Fungal infections can also cause root rot and damage, preventing water and nutrient uptake.
Finally, wilting blooms can result simply from age. If no other symptoms are visible, it may simply signal the natural end of the flower’s lifespan. If it seems premature, this may be caused by environmental factors: water, humidity, light, or stress. Under-watering is a common cause. Similarly, plants adapted to high humidity dry out easily when humidity is low, like during winter or in dry climates. Too much light can also stress plants that need shade, causing blooms to wilt.
Solutions
- Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water.
- Water according to recommendations for each plant's species.
- Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too.
- Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants.
- Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Prevention
- Read up on moisture, light, and soil type preferences for each plant to avoid underwatering, incorrect light levels, or other conditions that can cause wilting blooms.
- Avoid re-potting during the flowering period. This causes additional stress on the plants because they need to repair root damage and adapt to the new micro-environment, all of which can result in wilting.
- One other potential cause is ethylene gas, a plant hormone related to ripening. Some fruits and vegetables emit ethylene, especially bananas. Apples, grapes, melons, avocados, and potatoes can also give it off, so keep flowering plants away from fresh produce.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Leaf beetles
Leaf beetles are a class of colored insects 1 to 2 cm in size. They gnaw on leaves and petals resulting in small, round holes scattered over the surface.
Overview
Leaf beetles range in size from 1.5 mm to 2 cm. Both adult beetles and their larvae eat the leaves of many different types of plants. There are over 35,000 different species of leaf beetles, in a variety of colors including gold, green, yellow-striped, and red striped. Some of these have been mistaken for ladybirds because of their shape and coloring. They can be oval, round, or elongated in shape. These insect pests are most active in spring and summer.
If not controlled, leaf beetles can do a lot of damage to vegetable crops and ornamental plants. They feed on the leaves, flowers, stems, roots, and fruits of different plants. They can fly, which means it's easy for them to move from one plant to another. Some species of leaf beetles only target one specific crop, while others will target many different types of plants. Although a lot of the damage that they cause is cosmetic, an infestation can weaken a plant and leave it prone to other more problematic diseases.
Symptom Analysis
The first signs of a leaf beetles infestation are small visible holes in leaves. Leaves then become discolored and dark beetle droppings can be seen. As the leaves turn yellow and brown, they will drop off the plant onto the ground. Some leaves will appear skeletonized with only the veins still remaining.
Infestation begins in spring, when the adult beetles emerge from the soil and lay their eggs on the leaves of plants. When these eggs hatch, the young nymphs start munching on the leaves as they grow up. Once leaf beetles are large and mature, they'll fall to the ground and pupate in the soil over winter before starting the cycle all over again.
Leaf beetles also eat holes in fruits and vegetables. These can be seen as small round holes that sometimes have a larger brown area surrounding them.
Solutions
For less serious cases:
- Remove beetles, nymphs, and eggs. Remove all life stages of the beetles and kill them by placing them in a bucket of warm, soapy water. This can be done more easily by placing the bucket under affected leaves and shaking the plant. This method is most effective in the afternoon when leaf beetles are more active. Always dispose of insects in a sealed bag or container to avoid escape and spread.
To treat more serious infestations:
- Apply organic insecticides. Use naturally-derived insecticides before moving on to synthetic insecticides. Neem oil and pyrethrum are naturally-derived insecticides that should be applied following label instructions.
- Apply synthetic insecticides. Examples of insecticides effective for leaf beetles include carbaryl, permethrin, and bifenthrin. Apply insecticides according to label instructions.
Prevention
To prevent infestations of leaf beetles, follow these practices.
- Regularly check for beetles. To prevent large pest infestations, be proactive about frequently checking plants for pests and removing them quickly.
- Clear debris. Clear weeds and debris to remove areas where these beetles may overwinter and hide.
- Attract natural predators. Birds and other insects, such as wasps and ladybugs, are effective natural predators of leaf beetles. Encourage them to visit by including a diverse array of plants to provide habitat and food. Also, avoid applying broad-spectrum herbicides that can harm and kill beneficial insects.
- Plant aromatic herbs like mint, garlic, or rosemary, as these can repel leaf beetles.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Distribution Map
Habitat
Roadsides, along railroads, fields, thickets
Map
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info
Plant Type
Herb
Flower Color
Blue
Purple
White
Red
Bloom Time
Late spring, Summer
Name story
Ohio spiderwort
Some believe that it is called spiderwort for those angular leaves and stems which resemble spider legs. Others say it is due to the strands of sap the plant secreted whenever it is cut or injured, manifesting the appearance of spider webs. In fact, the specific epithet ohiensis, actually holds the meaning 'of' or 'from Ohio'. Therefore, it is called Ohio spiderwort.
Symbolism
Respect
Usages
Environmental Protection Value
Tradescantia ohiensis can absorb dust and monitor pollution.
Garden Use
Ohio spiderwort is a species of flowering perennial which is planted in gardens for its beautiful flowers, adaptability to various growing conditions, and resistance to pests and disease. It is usually found in flowerbeds, floral borders, and meadow gardens.
Scientific Classification
Phylum
Vascular plants Class
Monocotyledons Order
Spiderworts and allies Family
Spiderwort Genus
Spiderworts Species
Ohio spiderwort 
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Download the App
Related Plants
Related Articles
Most Common Herb
# Useful Tips
Best Perennial Plant to Grow
# Useful Tips
Best Perennial Plant to Grow
# Useful Tips
Most Common Herb
# Useful Tips
Discover more articles?
Read More 
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Sign in/sign up
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Water
How Often Should I Water Ohio Spiderwort?
Every week
Watering Frequency
Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App
Just like people, each plant has its own preferences and needs. Devote time to understanding your plants so you can nurture them properly. Observe your plants attentively, learning from their growth patterns, and becoming more in tune with their needs as you grow together. Keep a watchful eye on new plants and seedlings, as they are sensitive to both overwatering and underwatering. Shower them with gentle love and attention, fostering their growth and strength. Let the rhythm of your local climate guide your watering habits, adapting your schedule to the changing weather and the needs of your plants. Important Symptoms
Overwatering
Ohio spiderwort is more susceptible to developing disease symptoms when overwatered because it prefers a soil environment with moderate humidity. Symptoms of overwatering include yellowing leaves, brown or black spots, root rot...
View more
(Symptom details and solutions)
Brown or black spots
Excessive watering can damage the plant's root system, making it vulnerable to fungal infections. The plant may develop dark brown to black spots that spread upwards from the lower leaves which are usually the first to be affected.
Root rot
Excess water in the soil can lead to the growth of harmful fungi and bacteria, causing the roots to rot and eventually kill the plant.
Soft or mushy stems
Excess water can cause stems to become soft and mushy, as the cells become waterlogged and lose their structural integrity.
Increased susceptibility diseases
Overwatering plants may become more susceptible and diseases as their overall health declines, weakening their natural defenses.
Solutions
1. Adjust watering frequency based on seasons and soil dryness. Wait for soil to dry before watering.2. Increase soil aeration by loosening surface and gently stirring with a wooden stick or chopstick.3. Optimize environment with good ventilation and warmth to enhance water evaporation and prevent overwatering.
Underwatering
Ohio spiderwort is more susceptible to plant health issues when lacking watering, as it can only tolerate short periods of drought. Symptoms of dehydration include wilting, leaf curling, yellowing leaves...
View more
(Symptom details and solutions)
Wilting
Due to the dry soil and insufficient water absorption by the roots, the leaves of the plant will appear limp, droopy, and lose vitality.
Leaf curling
Leaves may curl inward or downward as they attempt to conserve water and minimize water loss through transpiration.
Increased susceptibility to pests and diseases
Underwatered plants may become more susceptible to pests and diseases as their overall health declines, weakening their natural defenses.
Dying plant
If underwatering continues for an extended period, the plant may ultimately die as a result of severe water stress and an inability to carry out essential functions.
Solutions
1. Thoroughly saturate soil with slow ring watering to ensure uniform and sufficient moisture for plants. 2. Increase air humidity with water trays or misting to slow leaf water evaporation. 3. Watering according to the recommended frequency.Adjust watering frequency based on seasons and soil dryness.
Discover information about plant diseases, toxicity, weed control and more.
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Full sun
Ideal
Above 6 hours sunlight
Partial sun
Tolerance
About 3-6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
The ohio spiderwort has a strong preference for areas which receive light for most of the day. It can also grow well in locations that have a reduced exposure to sunlight. The plant's native habitat is open clearings which tend to have ample light. Inadequate light can stymie the plant's growth while excessive light might cause leaf scorching.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Ohio spiderwort is a versatile plant that thrives in full sunlight but can tolerate partial shade. While it can adapt to different light conditions, when grown indoors with insufficient light, subtle symptoms of light deficiency may arise.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your ohio spiderwort may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
Ohio spiderwort enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Ohio spiderwort thrives in full sun exposure but can adapt to partial shade. Although sunburn symptoms occur occasionally, they are generally tolerant of different light conditions due to their resilience.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover information about plant diseases, toxicity, weed control and more.
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
Ohio spiderwort is naturally adapted to medium warm conditions, thriving in temperatures from 68 to 95 °F (20 to 35 ℃). To ensure its healthy growth especially in extreme climates, seasonal adjustment of its environment might be crucial.
Regional wintering strategies
Ohio spiderwort has strong cold resistance, so special frost protection measures are usually not necessary during winter. However, if the winter temperatures are expected to drop below {Limit_growth_temperature}, it is still important to provide cold protection. This can be achieved by covering the plant with materials such as soil or straw. Before the first freeze in autumn, it is recommended to water the plant abundantly, ensuring the soil remains moist and enters a frozen state. This helps prevent drought and water scarcity for the plant during winter and early spring.
Important Symptoms
Low Temperature
Ohio spiderwort is cold-tolerant and thrives best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, although there may not be any noticeable changes during winter, there may be a decrease in sprouting or even no sprouting during springtime.
Solutions
In spring, remove any parts that have failed to sprout.
High Temperature
During summer, Ohio spiderwort should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the leaves of the plant may become lighter in color, prone to curling, susceptible to sunburn, and in severe cases, the entire plant may wilt and become dry.
Solutions
Trim away the sunburned and dried-up parts. Move the plant to a location that provides shade from the midday and afternoon sun, or use a shade cloth to create shade. Water the plant in the morning and evening to keep the soil moist.
Discover information about plant diseases, toxicity, weed control and more.
Transplant
How to Successfully Transplant Ohio Spiderwort?
Ohio spiderwort can successfully be transplanted from late spring to mid-summer (consider this S2-S4). Its preference for full to partial sunlight, combined with moist and loamy soil, ensures optimum growth. When moving this robust perennial, remembering not to plant too deep helps maintain its overall health.
What Preparations are Needed Before Transplanting Ohio Spiderwort?
What is the Ideal Time for Transplanting Ohio Spiderwort?
Perfect pitching time for ohio spiderwort is late summer to early autumn. The gradually cooling conditions aid root establishment without stressing it. By planting in this 'Goldilocks' zone, you’ll maximize the life-cycle and make your spring scenery flourish.
How Much Space Should You Leave Between Ohio Spiderwort Plants?
Try to space out your ohio spiderwort about 1-2 feet (30-60 cm) apart. It allows each plant to have enough room to spread out its roots and grow without fighting for resources. Remember, plants like to have their personal space too!
What is the Best Soil Mix for Ohio Spiderwort Transplanting?
Your ohio spiderwort will enjoy a fertile and well-drained soil. Incorporate a balanced slow-release fertilizer into the soil before planting. This should provide the nutrients your ohio spiderwort needs to grow beautifully!
Where Should You Relocate Your Ohio Spiderwort?
Find a location where your ohio spiderwort can enjoy full sun to partial shade. Though this plant's adaptable, lots of sunlight will ensure it grows vibrantly. Happy planting!
What Equipments Should You Prepare Before Transplantation Ohio Spiderwort?
Gardening gloves
To protect your hands while working with the soil and ohio spiderwort.
Shovel or spade
Needed for digging holes as big as the root ball of your ohio spiderwort, or even larger.
Pruning shears
Used to trim any damaged or dead parts of the ohio spiderwort plant prior to transplanting.
Bucket or wheelbarrow
Used to transport ohio spiderwort from its original location to the new location.
Watering can or hose
To water the ohio spiderwort before and after moving it.
How Do You Remove Ohio Spiderwort from the Soil?
Step1 Preparation
Make sure the new planting hole is ready before you start the transplant. The hole should be twice as wide and the same depth as the ohio spiderwort's root ball. Place a layer of compost at the bottom of the hole for nutrients, but remenber that the ohio spiderwort doesn't require much fertillizer.
Step2 Planting
Once the ohio spiderwort is in the ground, back fill the hole, avoiding putting soil on top of the root ball. Firm the soil around the base of the ohio spiderwort to ensure it is secure and upright.
Step3 Watering
Water in well after planting, this helps the ohio spiderwort to establish in its new location.
Step-by-Step Guide for Transplanting Ohio Spiderwort
Step1 Preparation
Make sure the new planting hole is ready before you start the transplant. The hole should be twice as wide and the same depth as the ohio spiderwort's root ball. Place a layer of compost at the bottom of the hole for nutrients, but remenber that the ohio spiderwort doesn't require much fertillizer.
Step2 Planting
Once the ohio spiderwort is in the ground, back fill the hole, avoiding putting soil on top of the root ball. Firm the soil around the base of the ohio spiderwort to ensure it is secure and upright.
Step3 Watering
Water in well after planting, this helps the ohio spiderwort to establish in its new location.
How Do You Care For Ohio Spiderwort After Transplanting?
Mulch
After transplanting, apply a layer of organic mulch around ohio spiderwort but not touching the stem. Mulch helps to conserve soil moisture and suppresses weed growth.
Consistent Watering
As ohio spiderwort is settling in, ensure it receives consistent watering but avoid waterlogging the soil. Be extra vigilant during dry periods. After a few weeks the roots of your ohio spiderwort will have started to establish and watering can be reduced.
Checking Plant Health
Regularly check on your ohio spiderwort for signs of distress like wilting or discolored leaves. If you notice anything concerning, it may be a sign of disease or pest infestation, and appropriate action should be taken swiftly.
Troubleshooting Common Issues with Ohio Spiderwort Transplantation.
When is the best time to transplant ohio spiderwort?
The ideal transplanting season for ohio spiderwort is between late spring (S2) and early autumn (S4).
What is the appropriate spacing for ohio spiderwort during transplantation?
Ohio spiderwort needs enough space to thrive. Maintain a distance of about 1-2 feet (30-60 cm) between each plant.
Should I prune ohio spiderwort before transplanting?
Yes, trim back any overly long or dead stems before you transplant ohio spiderwort to promote robust growth.
What kind of soil does ohio spiderwort prefer for transplantation?
Ohio spiderwort thrives in moderately fertile, well-drained soil. Avoid excessively clayey or sandy soils.
Do I need to water ohio spiderwort immediately after transplanting?
Absolutely! Watering ohio spiderwort right after transplanting promotes root establishment and initial growth.
Should I fertilize ohio spiderwort soon after transplanting?
Wait before fertilizing newly transplanted ohio spiderwort. Too early can cause root burn. Start applying fertilizer a few weeks later.
How can I prepare the transplanting site for ohio spiderwort?
Prepare the transplanting site by loosening the soil to a depth of about 12 inches (30 cm) and mix in some compost.
What’s the ideal depth to plant ohio spiderwort?
Transplant ohio spiderwort at the same depth it was growing in its previous location. Typically, this is around 2-3 inches (5-7.5 cm).
Can ohio spiderwort survive if I transplant it during the peak of summer or winter?
It's not advised. Transplanting ohio spiderwort during seasons of extreme weather conditions can shock the plant and hinder its development.
Do I need to stake ohio spiderwort after transplanting?
Ohio spiderwort is typically self-supporting, but if planted in a particularly windy area, some staking can help prevent damage.
Discover information about plant diseases, toxicity, weed control and more.
