Zantedeschia 'Flame' features striking, funnel-shaped spathes with a vibrant blend of yellow and red, reminiscent of flames. Its elegant, glossy leaves provide a lush backdrop for the showy flowers. Thriving in moist, well-drained soil and partial sun, zantedeschia 'Flame''s vivid blossoms are a testament to its preference for warm, humid environments, making it a captivating addition to any garden.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Common Pests & Diseases About Zantedeschia 'Flame'
Feedback
Common issues for Zantedeschia 'Flame' based on 10 million real cases
Wilting after blooming
Flowers may wither for a variety of reasons.
Solutions: Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water. Water according to recommendations for each plant's species. Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too. Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants. Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Solutions: There are several easy ways to remedy the nutrient deficiencies in soils. Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies. Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy. Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly. Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Underwatering yellow
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Solutions: Your plant is very thirsty and needs water promptly. You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot. If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Solutions: Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it. Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find. Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray. Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Wilting after blooming
Flowers may wither for a variety of reasons.
Overview
Wilting after blooming is sometimes a natural aging process of the flower, while other times it may indicate a problem. Orchids, for example, can bloom for anywhere from two weeks to three months, so wilting after a few days signals a problem for most varieties. This can happen to virtually any ornamental flowering plant, but those with shallow roots and limited tolerance for drought, full sun, and low humidity are more susceptible.
This is a common problem, and often has an easy fix. Sometimes, however, it is the result of more serious causes such as pests or disease of the root system.
Symptom Analysis
At first, flowers may look a little limp.
Petals may start to appear dried out and turn brown.
Eventually they may drop off the plant all together.
Disease Cause
Wilting blooms can be a sign of an unhealthy root system. Any condition that prevents the plant from absorbing enough water and nutrition can result in wilting blooms and sometimes other symptoms. If the plant doesn’t have enough water, it cannot maintain appropriate pressure within stems, leaves, and blooms, causing them to wilt.
This can result from physical damage – for example from root breakage during re-potting or attack by insects like cutworms. If you recently re-potted your plant, physical damage to the roots is a likely cause. If you see insects, they may be eating leaves, roots, or flowers. Fungal infections can also cause root rot and damage, preventing water and nutrient uptake.
Finally, wilting blooms can result simply from age. If no other symptoms are visible, it may simply signal the natural end of the flower’s lifespan. If it seems premature, this may be caused by environmental factors: water, humidity, light, or stress. Under-watering is a common cause. Similarly, plants adapted to high humidity dry out easily when humidity is low, like during winter or in dry climates. Too much light can also stress plants that need shade, causing blooms to wilt.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Overview
Nutrient deficiencies can be seen in many different ways on plants. Basically, the lack of nutrients will inhibit plant growth, produce weak stems and leaves, and leave plants open to infection from pests and diseases. Plants use the nutrients from the soil to help them with photosynthesis. This, in turn, produces healthy plant growth. Plants that lack adequate amounts of nutrients will look lackluster and unhealthy. Eventually, if this is not addressed, it will cause the plants to die. The most important nutrients that plants need are nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur. Additionally, plants require small amounts of micronutrients such as iron, boron, manganese, zinc, copper, and molybdenum.
Symptom Analysis
A common sign that plants are experiencing nutrient deficiencies is the yellowing of leaves. This may be an overall yellowing or leaves that are yellow but still have green veins. These leaves will eventually brown off and die.
Another sign is the loss of plant vigor. The plants may not be growing as well as they should or their growth may be stunted.
Below are some common symptoms that appear when plants are lacking in nutrients.
Nitrogen (N): Inner, older leaves yellow first. If the deficiency is severe, yellowing progresses outward to newer growth.
Potassium (K): Leaf edges may turn brown and crinkly, with a yellowing layer forming just inside of the edge. Older leaves tend to be impacted first.
Phosphorus (P): Lack of vigorous growth. Plants will appear stunted.
Zinc (Zn): Yellowing tends to occur first at the base of the leaf.
Copper (Cu): Newer leaves begin to yellow first, with older leaves yellowing only if the deficiency becomes severe.
Boron (B): Newer leaves are impacted first. Foliage may also become particularly brittle in cases of boron deficiency.
Disease Cause
There are several factors that can lead to nutrient deficiencies, a situation where plants are not receiving the nutrients that they need. This could be because they are planted in nutrient-deficient soils, or that the soil's pH is too high or low. Incorrect soil pH can lock up certain nutrients, thus making them unavailable to plants. Lack of soil moisture can also be a problem, because plants need water to be able to absorb the nutrients from the soil.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Underwatering yellow
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Symptom Analysis
Your plant’s leaves are turning yellow due to underwatering, the oldest leaves turn yellow first. Leaves yellow from the edges towards the middle. Other signs of underwatering include the soil feeling very dry or pulling away from the edge of its pot.
Solutions
Your plant is very thirsty and needs water promptly.
You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot.
If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Prevention
When you get a new plant, research its specific watering needs. Set reminders so that you remember to water your plants consistently. Not all plants are the same, so make sure to differentiate all of your plants in your watering schedule.
You may wish to purchase a commercial soil water meter which has a long probe that you place near your plant’s roots. Be sure to check it frequently and water your plant when the soil water meter indicates that it needs watering.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Symptom Analysis
Your plant has developed tiny yellowish spots scattered across the leaves that look like mold or mildew. If these marks won't wipe off, they are likely caused by sap-sucking insects like aphids, squash bugs, scale bugs, leafhoppers, whiteflies, mites, mealybugs, and more.
Each of these pests uses mouthparts to pierce leaf tissues and suck the sap. uses mouthparts to pierce leaf tissues and suck the sap. Signs of damage are difficult to spot at first, but a large infestation can quickly compromise the whole plant. You're most likely to see sap-sucking insects during the hottest months because plants make easier targets when already weakened from heat or drought.
Though sap-sucking insects are unlikely to kill your plant on their own, they can severely weaken it and make it more susceptible to disease. They may also spread viruses from one plant to another as they feed.
Solutions
Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it.
Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find.
Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray.
Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Prevention
Healthy plants are less likely to suffer from sap-sucker attacks. Keep them fortified with fertilizer and the right amounts of water and sunlight. Plants that receive excess nitrogen are also more susceptible to attack, so don’t overfertilize. You should also remove weeds and tall grasses surrounding your outdoor plants so as not to create habitat space for the pests.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
About
Care Guide
More Info
Pests & Diseases
Zantedeschia 'Flame'
Zantedeschia 'Flame'
Zantedeschia 'Flame' features striking, funnel-shaped spathes with a vibrant blend of yellow and red, reminiscent of flames. Its elegant, glossy leaves provide a lush backdrop for the showy flowers. Thriving in moist, well-drained soil and partial sun, zantedeschia 'Flame''s vivid blossoms are a testament to its preference for warm, humid environments, making it a captivating addition to any garden.
Hardiness Zones
8 to 11
Instantly identify plants with a snap
Snap a photo for instant plant ID, gaining quick insights on disease prevention, treatment, toxicity, care, uses, and symbolism, etc.
Plant care made easier than ever with our tailor-made smart care reminder.
Download the App for Free
Common Pests & Diseases About Zantedeschia 'Flame'
Feedback
Common issues for Zantedeschia 'Flame' based on 10 million real cases
Wilting after blooming
Flowers may wither for a variety of reasons.
Solutions: Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water. Water according to recommendations for each plant's species. Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too. Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants. Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Learn More About the Wilting after blooming
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Solutions: There are several easy ways to remedy the nutrient deficiencies in soils. Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies. Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy. Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly. Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Learn More About the Nutrient deficiencies
Underwatering yellow
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Solutions: Your plant is very thirsty and needs water promptly. You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot. If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Learn More About the Underwatering yellow
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Solutions: Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it. Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find. Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray. Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Learn More About the Sap-sucking insects
Wilting after blooming
Flowers may wither for a variety of reasons.
Overview
Wilting after blooming is sometimes a natural aging process of the flower, while other times it may indicate a problem. Orchids, for example, can bloom for anywhere from two weeks to three months, so wilting after a few days signals a problem for most varieties. This can happen to virtually any ornamental flowering plant, but those with shallow roots and limited tolerance for drought, full sun, and low humidity are more susceptible.
This is a common problem, and often has an easy fix. Sometimes, however, it is the result of more serious causes such as pests or disease of the root system.
Symptom Analysis
At first, flowers may look a little limp.
Petals may start to appear dried out and turn brown.
Eventually they may drop off the plant all together.
Disease Cause
Wilting blooms can be a sign of an unhealthy root system. Any condition that prevents the plant from absorbing enough water and nutrition can result in wilting blooms and sometimes other symptoms. If the plant doesn’t have enough water, it cannot maintain appropriate pressure within stems, leaves, and blooms, causing them to wilt.
This can result from physical damage – for example from root breakage during re-potting or attack by insects like cutworms. If you recently re-potted your plant, physical damage to the roots is a likely cause. If you see insects, they may be eating leaves, roots, or flowers. Fungal infections can also cause root rot and damage, preventing water and nutrient uptake.
Finally, wilting blooms can result simply from age. If no other symptoms are visible, it may simply signal the natural end of the flower’s lifespan. If it seems premature, this may be caused by environmental factors: water, humidity, light, or stress. Under-watering is a common cause. Similarly, plants adapted to high humidity dry out easily when humidity is low, like during winter or in dry climates. Too much light can also stress plants that need shade, causing blooms to wilt.
Solutions
Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water.
Water according to recommendations for each plant's species.
Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too.
Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants.
Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Prevention
Read up on moisture, light, and soil type preferences for each plant to avoid underwatering, incorrect light levels, or other conditions that can cause wilting blooms.
Avoid re-potting during the flowering period. This causes additional stress on the plants because they need to repair root damage and adapt to the new micro-environment, all of which can result in wilting.
One other potential cause is ethylene gas, a plant hormone related to ripening. Some fruits and vegetables emit ethylene, especially bananas. Apples, grapes, melons, avocados, and potatoes can also give it off, so keep flowering plants away from fresh produce.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Overview
Nutrient deficiencies can be seen in many different ways on plants. Basically, the lack of nutrients will inhibit plant growth, produce weak stems and leaves, and leave plants open to infection from pests and diseases. Plants use the nutrients from the soil to help them with photosynthesis. This, in turn, produces healthy plant growth. Plants that lack adequate amounts of nutrients will look lackluster and unhealthy. Eventually, if this is not addressed, it will cause the plants to die. The most important nutrients that plants need are nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur. Additionally, plants require small amounts of micronutrients such as iron, boron, manganese, zinc, copper, and molybdenum.
Symptom Analysis
A common sign that plants are experiencing nutrient deficiencies is the yellowing of leaves. This may be an overall yellowing or leaves that are yellow but still have green veins. These leaves will eventually brown off and die.
Another sign is the loss of plant vigor. The plants may not be growing as well as they should or their growth may be stunted.
Below are some common symptoms that appear when plants are lacking in nutrients.
Nitrogen (N): Inner, older leaves yellow first. If the deficiency is severe, yellowing progresses outward to newer growth.
Potassium (K): Leaf edges may turn brown and crinkly, with a yellowing layer forming just inside of the edge. Older leaves tend to be impacted first.
Phosphorus (P): Lack of vigorous growth. Plants will appear stunted.
Zinc (Zn): Yellowing tends to occur first at the base of the leaf.
Copper (Cu): Newer leaves begin to yellow first, with older leaves yellowing only if the deficiency becomes severe.
Boron (B): Newer leaves are impacted first. Foliage may also become particularly brittle in cases of boron deficiency.
Disease Cause
There are several factors that can lead to nutrient deficiencies, a situation where plants are not receiving the nutrients that they need. This could be because they are planted in nutrient-deficient soils, or that the soil's pH is too high or low. Incorrect soil pH can lock up certain nutrients, thus making them unavailable to plants. Lack of soil moisture can also be a problem, because plants need water to be able to absorb the nutrients from the soil.
Solutions
There are several easy ways to remedy the nutrient deficiencies in soils.
Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies.
Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy.
Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly.
Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Prevention
There are several easy ways to prevent nutrient deficiencies in plants.
Regular fertilizing. Regular addition of fertilizer to the soil is one of the simplest and most effective ways to prevent deficiencies.
Proper watering. Both over and under watering can adversely impact a plant's roots, which in turn makes it harder for them to properly take up nutrients.
Testing the soil's pH. A soil's acidity or alkalinity will impact the degree to which certain nutrients are available to be taken up by plants. Knowing the soil's pH means it can be amended to suit the needs of the individual plants.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Underwatering yellow
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Symptom Analysis
Your plant’s leaves are turning yellow due to underwatering, the oldest leaves turn yellow first. Leaves yellow from the edges towards the middle. Other signs of underwatering include the soil feeling very dry or pulling away from the edge of its pot.
Solutions
Your plant is very thirsty and needs water promptly.
You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot.
If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Prevention
When you get a new plant, research its specific watering needs. Set reminders so that you remember to water your plants consistently. Not all plants are the same, so make sure to differentiate all of your plants in your watering schedule.
You may wish to purchase a commercial soil water meter which has a long probe that you place near your plant’s roots. Be sure to check it frequently and water your plant when the soil water meter indicates that it needs watering.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Sap-sucking insects
Sap-sucking insects can create dense clusters of small yellow or white spots on the leaves.
Symptom Analysis
Your plant has developed tiny yellowish spots scattered across the leaves that look like mold or mildew. If these marks won't wipe off, they are likely caused by sap-sucking insects like aphids, squash bugs, scale bugs, leafhoppers, whiteflies, mites, mealybugs, and more.
Each of these pests uses mouthparts to pierce leaf tissues and suck the sap. uses mouthparts to pierce leaf tissues and suck the sap. Signs of damage are difficult to spot at first, but a large infestation can quickly compromise the whole plant. You're most likely to see sap-sucking insects during the hottest months because plants make easier targets when already weakened from heat or drought.
Though sap-sucking insects are unlikely to kill your plant on their own, they can severely weaken it and make it more susceptible to disease. They may also spread viruses from one plant to another as they feed.
Solutions
Sap-sucking insects can be hard to spot, as they are often small and attach to the undersides of plant leaves. If you see signs of an infestation, follow these steps to eradicate it.
Hand-pick bugs and remove eggs: Inspect your plants for insects and drop any you find in a container of soapy water. Look carefully at the undersides of plant leaves and squish any egg clusters you find.
Use Insecticide: Targeted spraying can take out sap-sucking insects. Small infestations can be controlled with insecticidal soap, though larger outbreaks might require a stronger spray.
Introduce natural predators: Many insects, including ladybugs and praying mantises, love to feast on sap-suckers. You can purchase them at garden stores and release them near infected plants, or encourage wild ones by creating habitat space.
Prevention
Healthy plants are less likely to suffer from sap-sucker attacks. Keep them fortified with fertilizer and the right amounts of water and sunlight. Plants that receive excess nitrogen are also more susceptible to attack, so don’t overfertilize. You should also remove weeds and tall grasses surrounding your outdoor plants so as not to create habitat space for the pests.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App for Free
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Cookie Management Tool
In addition to managing cookies through your browser or device, you can change your cookie settings below.
Necessary Cookies
Necessary cookies enable core functionality. The website cannot function properly without these cookies, and can only be disabled by changing your browser preferences.
Analytical Cookies
Analytical cookies help us to improve our application/website by collecting and reporting information on its usage.
Cookie Name
Source
Purpose
Lifespan
_ga
Google Analytics
These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here.
1 Year
_pta
PictureThis Analytics
We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience.
1 Year
Cookie Name
_ga
Source
Google Analytics
Purpose
These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here.
Lifespan
1 Year
Cookie Name
_pta
Source
PictureThis Analytics
Purpose
We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience.
Lifespan
1 Year
Marketing Cookies
Marketing cookies are used by advertising companies to serve ads that are relevant to your interests.
Cookie Name
Source
Purpose
Lifespan
_fbp
Facebook Pixel
A conversion pixel tracking that we use for retargeting campaigns. Learn more here.
1 Year
_adj
Adjust
This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here.
1 Year
Cookie Name
_fbp
Source
Facebook Pixel
Purpose
A conversion pixel tracking that we use for retargeting campaigns. Learn more here.
Lifespan
1 Year
Cookie Name
_adj
Source
Adjust
Purpose
This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here.