camera identify
Try for Free
tab list
PictureThis
English
arrow
English
繁體中文
日本語
Español
Français
Deutsch
Pусский
Português
Italiano
한국어
Nederlands
العربية
Svenska
Polskie
ภาษาไทย
Bahasa Melayu
Bahasa Indonesia
PictureThis
Search
Search Plants
Try for Free
Global
English
English
繁體中文
日本語
Español
Français
Deutsch
Pусский
Português
Italiano
한국어
Nederlands
العربية
Svenska
Polskie
ภาษาไทย
Bahasa Melayu
Bahasa Indonesia
This page looks better in the app
about about
About
care_guide care_guide
Care Guide
topic topic
Care FAQ
plant_info plant_info
More Info
pests pests
Pests & Diseases
distribution_map distribution_map
Distribution
care_scenes care_scenes
More About How-Tos
more_plants more_plants
Related Plants
pic top
Calla lily
Calla lily
Calla lily
Calla lily
Calla lily
Calla lily
Calla lily
Zantedeschia albomaculata subsp. albomaculata
An ornamental flower with worldwide popularity, calla lily is mostly used as a cut flower, but it can be cultivated as a garden plant in warm climates. Like all species of the Zantedeschia genus, it hosts a caterpillar of the Hummingbird hawk-moth (Macroglossum stellatarum). When the flowers die, they reveal yellow berries that are particularly attractive to birds.
Hardiness Zones
Hardiness Zones
10 to 11
more
care guide

Care Guide for Calla lily

feedback
Feedback
feedback
Ideal Lighting
Ideal Lighting
Full sun, Partial sun
Details on Sunlight Requirements Ideal Lighting
Ideal Temperature
Ideal Temperature
10 to 11
Details on Temperature Ideal Temperature
care guide bg
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
Picture This
A Botanist in Your Pocket
qrcode
Scan QR code to download
label
cover
Calla lily
Water
Water
Every week
Hardiness Zones
Hardiness Zones
10 to 11
question

Questions About Calla lily

feedback
Feedback
feedback
Watering Watering Watering
Pruning Pruning Pruning
Sunlight Sunlight Sunlight
Temperature Temperature Temperature
Fertilizing Fertilizing Fertilizing
What is the best way to water my Calla lily?
There are plenty of viable ways to supply your Calla lily with water. If you grow your plant in an indoor pot, for the Calla lilys in small pots, you can bring your potted plant to your kitchen sink. Then, use the faucet to add water to the container. By holding the pot in your hands, you should easily notice when the water begins to run through the pot’s drainage holes, at which point you can stop watering. The cold temperature will hurt the plants' root system, so please don't do this during winter or in cold climates. Most of the time, watering via your faucet is permissible for the Calla lily. However, if the local tap water contains a high proportion of fluorine, chlorine or salts, you should consider using rainwater or lake water.
Also, since the Calla lily can respond well to overhead watering and watering directly into the soil, you can use a watering can, hose, or just about any tool you’d like to water it.
Read More more
What should I do if I water my Calla lily too much or too little?
If you discover that you have underwatered your Calla lily, your first step towards remedying the situation is to give your plant some water. Water deeply until excess water runs from the container’s drainage hole, or if you grow outside, water until the soil has become entirely moist. If you find your Calla lily is receiving too much water, begin by reducing your watering schedule. You also want to address the soil and container your Calla lily grows in. If either the soil or the container makes it difficult for water to drain efficiently, your plant will likely become overwatered again. Resolve the issue by moving your plant to looser soils and/or a container with bigger drainage holes or a more porous material. Also check the location of the plant. If the plant is in places like a corner, then it is recommended to move it to a window or around a door to enhance ventilation. Making sure the plants are in a well-ventilated location can reduce the occurrence of overwatering to some extent.
Read More more
How often should I water my Calla lily?
The Calla lily is not a species that requires consistent soil moisture. Instead, it is better to allow this plant’s soil to become dry between waterings. If you are like the many gardeners who grow Calla lilys in containers, you can judge whether or not it is time to add water by how dry the soil within the container is. For instance, if about top half of the soil in your container has become dry, it is time to add water. You can feel it by inserting your fingers or sticks into the soil or with soil moisture meter. For those who grow the Calla lily outdoors, you can plan to do your watering about once every other week, provided it has not rained recently.
Read More more
How much water does my Calla lily need?
After waiting for the first several layers of soil surrounding your Calla lily’s root to become dry(top half of the soil), it is time to add enough water to make them moist again. The amount of water it takes to achieve that goal depends on if you use a container, how large that container is, and how large your plant itself is. For a small Calla lily growing in a small to a medium-sized container, one to two cups may be enough to dampen the soil sufficiently. As you would expect, the volume of water you supply should increase for a larger plant. The best way to make sure your plant has received enough water is to stick your finger or a trowel into the soil and feel whether it is entirely moist. Alternatively, you can water until you see excess water draining from the holes at the bottom of your container.
Read More more
How can I tell if i'm watering my Calla lily enough?
Overwatering and underwatering are both bad for the health of your Calla lily. These two issues also manifest themselves in subtly different ways when they occur. Calla lily that receives too little water may begin to develop yellow leaves. Underwatering may also cause the leaf margins to become brown and brittle. By contrast, Calla lily that gets overwatered will often show yellow and brown marks on its leaves at the same time. Overwatering can also lead to diseases like root rot, some of which may also be visible on your plant. However, if you know the signs of overwatering and underwatering, you stand a good chance of correcting both issues.
Read More more
How should I water my Calla lily through the seasons?
During spring and fall, your watering schedule for the Calla lily will remain relatively the same, which will involve watering this plant about once every week. During summer, you may find that the hot weather causes your plant to need more water than usual, especially if it grows where there is a considerable amount of daily light exposure. In the winter, if it's hard to find some warm places for you plant, your Calla lily will enter a dormant growth phase, in which it will need far less water than usual. At this time, you may get by without watering your plant at all. If you do choose to water during winter, you should not do so more often than once every two to three weeks.
Read More more
How should I water my Calla lily at different growth stages?
After planting a new, young Calla lily or after transplanting an older Calla lily, you will probably need to give this plant more water than usual. Young plants often need consistent soil moisture during the early stages of their growth to help them adapt to their new growing locations. Transplants also need more water for a brief time to overcome transplant shock. In either case, you may need to water multiple times per week until your plant has exhibited continuous healthy growth. In most situations, your water should be moderate and should never be significant enough to cause overwatering.
Read More more
What's the difference between watering Calla lily indoors and outdoors?
There are a few reasons why you may need to water an indoor Calla lily more often than one that grows in the ground outdoors. First, indoor growing settings tend to be drier than outdoor ones, often due to the effect of air conditioning units. While thw size of the pot and the soil determines the warer accumulating ability. Additionally, when your plant grows indoors, it will rely on you entirely for its water By contrast, Calla lily that grows outside can receive water from rain. If you are in an area with high rainfall, you may not have to give it extra watering. When there is not enough rain, you should water additionally to ensure that the soil does not dry out completely.
Read More more
icon
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
close
plant_info

Key Facts About Calla lily

feedback
Feedback
feedback

Attributes of Calla lily

Lifespan
Perennial
Plant Type
Herb
Bloom Time
Summer
Flower Color
White
Yellow
Green
Dormancy
Winter dormancy
Leaf type
Evergreen
Ideal Temperature
20 - 38 ℃

Scientific Classification of Calla lily

icon
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
pests

Common Pests & Diseases About Calla lily

feedback
Feedback
feedback
Common issues for Calla lily based on 10 million real cases
Brown spot
Brown spot Brown spot
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Leaf rot
Leaf rot Leaf rot
Leaf rot
This pathogen can cause the leaves to rot.
Solutions: Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden. In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label. In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Wilting after blooming
Wilting after blooming Wilting after blooming
Wilting after blooming
Flowers may wither for a variety of reasons.
Solutions: Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water. Water according to recommendations for each plant's species. Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too. Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants. Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Nutrient deficiencies
Nutrient deficiencies Nutrient deficiencies
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Solutions: There are several easy ways to remedy the nutrient deficiencies in soils. Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies. Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy. Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly. Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
icon
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
close
Brown spot
plant poor
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
  • Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
  • Placement is often random and scattered as diseases are spread through raindrops.
  • May appear on lower leaves and the interior of the plant where humidity is higher.
  • Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
  • Leaf margins may turn yellow.
  • Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
  • Blotches grow in size until the entire leaf is brown.
  • The leaf falls off the plant.
Severe Symptoms
  • Partial or complete premature defoliation
  • Reduced growth
  • Increased susceptibility to pests and other diseases
Disease Cause
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
Leaf rot
plant poor
Leaf rot
This pathogen can cause the leaves to rot.
Overview
Overview
Leaf rot is very common among both house plants and garden plants. It affects foliage and occurs mainly when the leaves become wet due to rain or misting by the gardener. The cause is fungal disease and this is facilitated by the fungal spores adhering to wet leaves then penetrating the leaf and expanding rapidly. Damp conditions and poor air circulation will increase chances of infection taking place. Another factor are leaves that are damaged or have been penetrated by sap sucking insects that facilitate plant penetration.
Symptom Analysis
Symptom Analysis
  1. Spores are able to cling to a damp leaf and penetrate, often through an existing wound.
  2. A small dark brown mark appears which expands rapidly as sporulation starts to take place.
  3. Quite quickly these bull's eye like circles can link together and the whole leaf turns dark and loses texture.
  4. Leaf drop occurs.
Disease Cause
Disease Cause
These symptoms are caused by a bacterial infection invading the plant. Bacteria from many sources in the environment (air, water, soil, diseased plants) enter a plant through wounds, or in some cases the stomata when they are open. Once inside the leaf tissue, the bacteria feed and reproduce quickly, breaking down healthy leaves.
Bacterial infections threaten most plant species, and are more prominent in wet weather that more easily transfers the bacteria from plant to plant, or from soil to plant.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
Wilting after blooming
plant poor
Wilting after blooming
Flowers may wither for a variety of reasons.
Overview
Overview
Wilting after blooming is sometimes a natural aging process of the flower, while other times it may indicate a problem. Orchids, for example, can bloom for anywhere from two weeks to three months, so wilting after a few days signals a problem for most varieties. This can happen to virtually any ornamental flowering plant, but those with shallow roots and limited tolerance for drought, full sun, and low humidity are more susceptible.
This is a common problem, and often has an easy fix. Sometimes, however, it is the result of more serious causes such as pests or disease of the root system.
Symptom Analysis
Symptom Analysis
  • At first, flowers may look a little limp.
  • Petals may start to appear dried out and turn brown.
  • Eventually they may drop off the plant all together.
Disease Cause
Disease Cause
Wilting blooms can be a sign of an unhealthy root system. Any condition that prevents the plant from absorbing enough water and nutrition can result in wilting blooms and sometimes other symptoms. If the plant doesn’t have enough water, it cannot maintain appropriate pressure within stems, leaves, and blooms, causing them to wilt.
This can result from physical damage – for example from root breakage during re-potting or attack by insects like cutworms. If you recently re-potted your plant, physical damage to the roots is a likely cause. If you see insects, they may be eating leaves, roots, or flowers. Fungal infections can also cause root rot and damage, preventing water and nutrient uptake.
Finally, wilting blooms can result simply from age. If no other symptoms are visible, it may simply signal the natural end of the flower’s lifespan. If it seems premature, this may be caused by environmental factors: water, humidity, light, or stress. Under-watering is a common cause. Similarly, plants adapted to high humidity dry out easily when humidity is low, like during winter or in dry climates. Too much light can also stress plants that need shade, causing blooms to wilt.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
Nutrient deficiencies
plant poor
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Overview
Overview
Nutrient deficiencies can be seen in many different ways on plants. Basically, the lack of nutrients will inhibit plant growth, produce weak stems and leaves, and leave plants open to infection from pests and diseases. Plants use the nutrients from the soil to help them with photosynthesis. This, in turn, produces healthy plant growth. Plants that lack adequate amounts of nutrients will look lackluster and unhealthy. Eventually, if this is not addressed, it will cause the plants to die. The most important nutrients that plants need are nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur. Additionally, plants require small amounts of micronutrients such as iron, boron, manganese, zinc, copper, and molybdenum.
Symptom Analysis
Symptom Analysis
A common sign that plants are experiencing nutrient deficiencies is the yellowing of leaves. This may be an overall yellowing or leaves that are yellow but still have green veins. These leaves will eventually brown off and die.
Another sign is the loss of plant vigor. The plants may not be growing as well as they should or their growth may be stunted.
Below are some common symptoms that appear when plants are lacking in nutrients.
Nitrogen (N): Inner, older leaves yellow first. If the deficiency is severe, yellowing progresses outward to newer growth.
Potassium (K): Leaf edges may turn brown and crinkly, with a yellowing layer forming just inside of the edge. Older leaves tend to be impacted first.
Phosphorus (P): Lack of vigorous growth. Plants will appear stunted.
Zinc (Zn): Yellowing tends to occur first at the base of the leaf.
Copper (Cu): Newer leaves begin to yellow first, with older leaves yellowing only if the deficiency becomes severe.
Boron (B): Newer leaves are impacted first. Foliage may also become particularly brittle in cases of boron deficiency.
Disease Cause
Disease Cause
There are several factors that can lead to nutrient deficiencies, a situation where plants are not receiving the nutrients that they need. This could be because they are planted in nutrient-deficient soils, or that the soil's pH is too high or low. Incorrect soil pH can lock up certain nutrients, thus making them unavailable to plants. Lack of soil moisture can also be a problem, because plants need water to be able to absorb the nutrients from the soil.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
qrcode
Scan the QR code with your phone camera to download the app
distribution

Distribution of Calla lily

feedback
Feedback
feedback

Habitat of Calla lily

Damp grass, bracken and marshy areas

Distribution Map of Calla lily

Calla lily is naturally indigenous to the eastern and southern regions of Africa, where it thrives in a diversity of habitats. It has since expanded its presence to other continents, notably being introduced for cultivation in regions such as Oceania and East Asia. While originally hailing from major regions within Africa, calla lily's adaptability has allowed it to become established beyond its indigenous range, where it is now also cultivated.
distribution map
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
habit
care_scenes

More Info on Calla Lily Growth and Care

feedback
Feedback
Basic Care Guide
Lighting
Full sun
Calla lily demands ample light exposure for healthy development and flowers copiously under plentiful solar beams. Shaded conditions are moderately tolerable as well. Origins in environments with a copious amount of solar penetration support this. Excessive radiation can cause foliage damage, while lack of adequate sunlight may deter flowering.
Best Sunlight Practices
Temperature
5 - 43 ℃
Calla lily is native to environments with moderate seasonal temperature fluctuations, typically thriving within a range of 68 to 100 °F (20 to 38 ℃). Depending on the season, careful adjustment of surrounding temperatures is occasionally required for optimal plant health.
Temp for Healthy Growth
other_plant

Plants Related to Calla lily

feedback
Feedback
feedback
Heaven lotus
Heaven lotus
Heaven lotus is a medium-sized woody shrub native to Colombia. It produces beautiful thin green leaves and showy purple to dark pink flowers. Due to its decreasing population, the plant is presently classified as 'Vulnerable' on the IUCN Red List.
Red Silk Cotton Tree
Red Silk Cotton Tree
The name of the red Silk Cotton Tree (*Bombax ceiba*) comes from the capsules it produces that are chock-full of white fibers similar to cotton. The plant is found in Asia; in India, it's popular to plant it by roads, where its gorgeous crimson blooms cheer travelers.
Dense blazing star
Dense blazing star
Dense blazing star (Liatris spicata) is a flowering plant native to eastern North America. It comes from the same genetic family as sunflowers and daisies. The dense blazing star is a popular choice for a variety of pollinators, such as bees and butterflies. These plants have rather exacting demands on the soil, but benefit the local ecosystem by attracting scores of pollinating insects.
Treasure flower
Treasure flower
Treasure flower is an ornamental native to South Africa. With one look at the flowers on this plant, you’ll understand why its common name is treasure flower. Bi-colored and bold, treasure flower can be found in combinations of white, orange, yellow, cream, red or pink.
Scarlet begonia
Scarlet begonia
Another name for scarlet begonia (Begonia coccinea) is angel wing begonia because its oval-shaped leaves remind some people of angel wings. Others think it looks like the wings of a mythical flying beast: begonia dragon wing is an alternative name for it. The plants are native to South America, where they love to clamber up the sides of cliffs.
Illawarra flame tree
Illawarra flame tree
Illawarra flame tree (Brachychiton acerifolius) is a deciduous tree that will grow from 15 to 18 m tall. It has a round canopy with glossy green leaves and will spread from 9 to 12 m wide. It blooms in spring with showy red flowers. Produces large, brown fruit in summer and fall. Thrives in full sun and prefers moist to dry soil. It is drought tolerant and makes a good flowering street tree.
Cape jasmine
Cape jasmine
Gardenia jasminoides is an evergreen shrub with unique, glossy evergreen leaves and stunning flowers. The sophisticated, matte white flowers are often used in bouquets. The exceptional beauty of this ornamental plant has made it a popular and highly appreciated plant amongst gardeners and horticulturalists.
Golden pothos
Golden pothos
The golden pothos (Epipremnum aureum) is a popular houseplant that is commonly seen in Australia, Asia, and the West Indies. It goes by many nicknames, including "devil's ivy", because it is so hard to kill and can even grow in low light conditions. Golden pothos has poisonous sap, so it should be kept away from pets and children.
View More Plants
close
product icon
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
product icon
17,000 local species +400,000 global species studied
product icon
Nearly 5 years of research
product icon
80+ scholars in botany and gardening
ad
ad
Botanist in your pocket
Scan the QR code with your phone camera to download the app
About
Care Guide
Care FAQ
More Info
Pests & Diseases
Distribution
More About How-Tos
Related Plants
Calla lily
Calla lily
Calla lily
Calla lily
Calla lily
Calla lily
Calla lily
Zantedeschia albomaculata subsp. albomaculata
An ornamental flower with worldwide popularity, calla lily is mostly used as a cut flower, but it can be cultivated as a garden plant in warm climates. Like all species of the Zantedeschia genus, it hosts a caterpillar of the Hummingbird hawk-moth (Macroglossum stellatarum). When the flowers die, they reveal yellow berries that are particularly attractive to birds.
Hardiness Zones
Hardiness Zones
10 to 11
more
care guide

Care Guide for Calla lily

feedback
Feedback
feedback
icon
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
close
bg bg
download btn
Download
question

Questions About Calla lily

feedback
Feedback
feedback
Watering Watering Watering
Pruning Pruning Pruning
Sunlight Sunlight Sunlight
Temperature Temperature Temperature
Fertilizing Fertilizing Fertilizing
What is the best way to water my Calla lily?
more
What should I do if I water my Calla lily too much or too little?
more
How often should I water my Calla lily?
more
How much water does my Calla lily need?
more
How can I tell if i'm watering my Calla lily enough?
more
How should I water my Calla lily through the seasons?
more
How should I water my Calla lily at different growth stages?
more
What's the difference between watering Calla lily indoors and outdoors?
more
icon
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
Download the App
close
plant_info

Key Facts About Calla lily

feedback
Feedback
feedback

Attributes of Calla lily

Lifespan
Perennial
Plant Type
Herb
Bloom Time
Summer
Flower Color
White
Yellow
Green
Dormancy
Winter dormancy
Leaf type
Evergreen
Ideal Temperature
20 - 38 ℃
icon
Gain more valuable plant knowledge
Explore a rich botanical encyclopedia for deeper insights
Download the App

Scientific Classification of Calla lily

icon
Never miss a care task again!
Plant care made easier than ever with our tailor-made smart care reminder.
Download the App
pests

Common Pests & Diseases About Calla lily

feedback
Feedback
feedback
Common issues for Calla lily based on 10 million real cases
Brown spot
Brown spot Brown spot Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More About the Brown spot more
Leaf rot
Leaf rot Leaf rot Leaf rot
This pathogen can cause the leaves to rot.
Solutions: Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden. In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label. In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Learn More About the Leaf rot more
Wilting after blooming
Wilting after blooming Wilting after blooming Wilting after blooming
Flowers may wither for a variety of reasons.
Solutions: Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water. Water according to recommendations for each plant's species. Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too. Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants. Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Learn More About the Wilting after blooming more
Nutrient deficiencies
Nutrient deficiencies Nutrient deficiencies Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Solutions: There are several easy ways to remedy the nutrient deficiencies in soils. Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies. Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy. Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly. Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Learn More About the Nutrient deficiencies more
icon
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App
close
Brown spot
plant poor
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
  • Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
  • Placement is often random and scattered as diseases are spread through raindrops.
  • May appear on lower leaves and the interior of the plant where humidity is higher.
  • Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
  • Leaf margins may turn yellow.
  • Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
  • Blotches grow in size until the entire leaf is brown.
  • The leaf falls off the plant.
Severe Symptoms
  • Partial or complete premature defoliation
  • Reduced growth
  • Increased susceptibility to pests and other diseases
Disease Cause
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
  1. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
  2. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
  3. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
  • Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
  • Maintain good air movement between plants through proper plant spacing.
  • Increase air circulation through the center of plants through pruning.
  • Thoroughly clean all pruning tools after working with diseased plants.
  • Never dispose of disease plant material in a compost pile.
  • Avoid overhead watering to keep moisture off of the foliage.
  • Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
close
Leaf rot
plant poor
Leaf rot
This pathogen can cause the leaves to rot.
Overview
Overview
Leaf rot is very common among both house plants and garden plants. It affects foliage and occurs mainly when the leaves become wet due to rain or misting by the gardener. The cause is fungal disease and this is facilitated by the fungal spores adhering to wet leaves then penetrating the leaf and expanding rapidly. Damp conditions and poor air circulation will increase chances of infection taking place. Another factor are leaves that are damaged or have been penetrated by sap sucking insects that facilitate plant penetration.
Symptom Analysis
Symptom Analysis
  1. Spores are able to cling to a damp leaf and penetrate, often through an existing wound.
  2. A small dark brown mark appears which expands rapidly as sporulation starts to take place.
  3. Quite quickly these bull's eye like circles can link together and the whole leaf turns dark and loses texture.
  4. Leaf drop occurs.
Disease Cause
Disease Cause
These symptoms are caused by a bacterial infection invading the plant. Bacteria from many sources in the environment (air, water, soil, diseased plants) enter a plant through wounds, or in some cases the stomata when they are open. Once inside the leaf tissue, the bacteria feed and reproduce quickly, breaking down healthy leaves.
Bacterial infections threaten most plant species, and are more prominent in wet weather that more easily transfers the bacteria from plant to plant, or from soil to plant.
Solutions
Solutions
Bacterial infections need to be treated quickly to prevent the spread to neighboring, healthy plants, potentially wiping out large sections of your indoor or outdoor garden.
In mild cases: Use sterilized (10% bleach solution) pruning shears or scissors to remove any infected plant parts, making sure to dispose of them off site. Use a copper-based bactericide to treat the unaffected foliage, as well as the soil, and neighboring plants. Follow the manufacturer’s rate and timing directions found on the product label.
In severe cases, where more than half the leaves are affected: Remove all of the infected plants from the garden, disposing of them off site. Treat the soil and neighboring plants using a copper-based bactericide. Follow the manufacturer’s rate and timing directions found on the product label.
Prevention
Prevention
  1. Clean up garden debris at the end of the season, especially if it contains any diseased plant tissue. Diseases can overwinter from season to season and infect new plants.
  2. Avoid overhead watering to prevent transferring pathogens from one plant to another, and to keep foliage dry.
  3. Mulch around the base of plants to prevent soil-borne bacteria from splashing up onto uninfected plants.
  4. Sterilize cutting tools using a 10% bleach solution when gardening and moving from one plant to another.
  5. Do not work in your garden when it is wet.
  6. Rotate crops to prevent the buildup of bacteria in one site due to continuous cropping.
  7. Use a copper or streptomycin-containing bactericide in early spring to prevent infection. Read label directions carefully as they are not suitable for all plants.
  8. Ensure plants are well spaced and thin leaves on densely leaved plants so that air circulation is maximised.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
close
Wilting after blooming
plant poor
Wilting after blooming
Flowers may wither for a variety of reasons.
Overview
Overview
Wilting after blooming is sometimes a natural aging process of the flower, while other times it may indicate a problem. Orchids, for example, can bloom for anywhere from two weeks to three months, so wilting after a few days signals a problem for most varieties. This can happen to virtually any ornamental flowering plant, but those with shallow roots and limited tolerance for drought, full sun, and low humidity are more susceptible.
This is a common problem, and often has an easy fix. Sometimes, however, it is the result of more serious causes such as pests or disease of the root system.
Symptom Analysis
Symptom Analysis
  • At first, flowers may look a little limp.
  • Petals may start to appear dried out and turn brown.
  • Eventually they may drop off the plant all together.
Disease Cause
Disease Cause
Wilting blooms can be a sign of an unhealthy root system. Any condition that prevents the plant from absorbing enough water and nutrition can result in wilting blooms and sometimes other symptoms. If the plant doesn’t have enough water, it cannot maintain appropriate pressure within stems, leaves, and blooms, causing them to wilt.
This can result from physical damage – for example from root breakage during re-potting or attack by insects like cutworms. If you recently re-potted your plant, physical damage to the roots is a likely cause. If you see insects, they may be eating leaves, roots, or flowers. Fungal infections can also cause root rot and damage, preventing water and nutrient uptake.
Finally, wilting blooms can result simply from age. If no other symptoms are visible, it may simply signal the natural end of the flower’s lifespan. If it seems premature, this may be caused by environmental factors: water, humidity, light, or stress. Under-watering is a common cause. Similarly, plants adapted to high humidity dry out easily when humidity is low, like during winter or in dry climates. Too much light can also stress plants that need shade, causing blooms to wilt.
Solutions
Solutions
  • Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water.
  • Water according to recommendations for each plant's species.
  • Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too.
  • Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants.
  • Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Prevention
Prevention
  • Read up on moisture, light, and soil type preferences for each plant to avoid underwatering, incorrect light levels, or other conditions that can cause wilting blooms.
  • Avoid re-potting during the flowering period. This causes additional stress on the plants because they need to repair root damage and adapt to the new micro-environment, all of which can result in wilting.
  • One other potential cause is ethylene gas, a plant hormone related to ripening. Some fruits and vegetables emit ethylene, especially bananas. Apples, grapes, melons, avocados, and potatoes can also give it off, so keep flowering plants away from fresh produce.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
close
Nutrient deficiencies
plant poor
Nutrient deficiencies
A lack of nutrients will cause a widespread yellowing of the leaves. The yellowing may begin at the base or top of the plant.
Overview
Overview
Nutrient deficiencies can be seen in many different ways on plants. Basically, the lack of nutrients will inhibit plant growth, produce weak stems and leaves, and leave plants open to infection from pests and diseases. Plants use the nutrients from the soil to help them with photosynthesis. This, in turn, produces healthy plant growth. Plants that lack adequate amounts of nutrients will look lackluster and unhealthy. Eventually, if this is not addressed, it will cause the plants to die. The most important nutrients that plants need are nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur. Additionally, plants require small amounts of micronutrients such as iron, boron, manganese, zinc, copper, and molybdenum.
Symptom Analysis
Symptom Analysis
A common sign that plants are experiencing nutrient deficiencies is the yellowing of leaves. This may be an overall yellowing or leaves that are yellow but still have green veins. These leaves will eventually brown off and die.
Another sign is the loss of plant vigor. The plants may not be growing as well as they should or their growth may be stunted.
Below are some common symptoms that appear when plants are lacking in nutrients.
Nitrogen (N): Inner, older leaves yellow first. If the deficiency is severe, yellowing progresses outward to newer growth.
Potassium (K): Leaf edges may turn brown and crinkly, with a yellowing layer forming just inside of the edge. Older leaves tend to be impacted first.
Phosphorus (P): Lack of vigorous growth. Plants will appear stunted.
Zinc (Zn): Yellowing tends to occur first at the base of the leaf.
Copper (Cu): Newer leaves begin to yellow first, with older leaves yellowing only if the deficiency becomes severe.
Boron (B): Newer leaves are impacted first. Foliage may also become particularly brittle in cases of boron deficiency.
Disease Cause
Disease Cause
There are several factors that can lead to nutrient deficiencies, a situation where plants are not receiving the nutrients that they need. This could be because they are planted in nutrient-deficient soils, or that the soil's pH is too high or low. Incorrect soil pH can lock up certain nutrients, thus making them unavailable to plants. Lack of soil moisture can also be a problem, because plants need water to be able to absorb the nutrients from the soil.
Solutions
Solutions
There are several easy ways to remedy the nutrient deficiencies in soils.
  1. Use a water-soluble fertilizer. Fertilizers will include most or all of the macro and micro-nutrients the plants need to thrive. Adding some fertilizer to the soil will make those nutrients available and can combat deficiencies.
  2. Regularly apply organic fertilizer pellets. Organic fertilizers such as animal manures and bonemeal can supply plants with all the nutrients that they need to grow strong and healthy.
  3. Apply compost. Though not as finely tuned as artificial fertilizer, compost can nevertheless be rich in important nutrients and should be applied to the soil regularly.
  4. Apply nutrients via foliar application. In addition to supplementing the soil with nutrients, foliar fertilizer can be applied directly to the plant's leaves. Nutrients offered via foliar application are often taken up even quicker than those put in the soil, so the foliar application can be great for swiftly addressing specific deficiencies.
Prevention
Prevention
There are several easy ways to prevent nutrient deficiencies in plants.
  1. Regular fertilizing. Regular addition of fertilizer to the soil is one of the simplest and most effective ways to prevent deficiencies.
  2. Proper watering. Both over and under watering can adversely impact a plant's roots, which in turn makes it harder for them to properly take up nutrients.
  3. Testing the soil's pH. A soil's acidity or alkalinity will impact the degree to which certain nutrients are available to be taken up by plants. Knowing the soil's pH means it can be amended to suit the needs of the individual plants.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
distribution

Distribution of Calla lily

feedback
Feedback
feedback

Habitat of Calla lily

Damp grass, bracken and marshy areas

Distribution Map of Calla lily

Calla lily is naturally indigenous to the eastern and southern regions of Africa, where it thrives in a diversity of habitats. It has since expanded its presence to other continents, notably being introduced for cultivation in regions such as Oceania and East Asia. While originally hailing from major regions within Africa, calla lily's adaptability has allowed it to become established beyond its indigenous range, where it is now also cultivated.
distribution map
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
care_scenes

More Info on Calla Lily Growth and Care

feedback
Basic Care Guide
plant_info

Plants Related to Calla lily

feedback
Feedback
feedback
product icon close
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
product icon
17,000 local species +400,000 global species studied
product icon
Nearly 5 years of research
product icon
80+ scholars in botany and gardening
ad
product icon close
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
Lighting
close
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips.
Requirements
Full sun
Ideal
Above 6 hours sunlight
Partial sun
Tolerance
About 3-6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness.
Essentials
Calla lily demands ample light exposure for healthy development and flowers copiously under plentiful solar beams. Shaded conditions are moderately tolerable as well. Origins in environments with a copious amount of solar penetration support this. Excessive radiation can cause foliage damage, while lack of adequate sunlight may deter flowering.
Preferred
Tolerable
Unsuitable
icon
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Symptoms of Insufficient Light in %s
Calla lily thrives in full sunlight but is often cultivated indoors during winter due to sensitivity to cold. This increases the chance of being placed in rooms with inadequate lighting, leading to noticeable symptoms of light deficiency.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your Calla lily may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
Calla lily enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Symptoms of Excessive light in %s
Calla lily thrives in full sun exposure and can tolerate intense sunlight. With their remarkable resilience, symptoms of sunburn may not be easily visible, as they rarely suffer from it.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover information about plant diseases, toxicity, weed control and more.
Temperature
close
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips.
Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care.
Essentials
Calla lily is native to environments with moderate seasonal temperature fluctuations, typically thriving within a range of 68 to 100 °F (20 to 38 ℃). Depending on the season, careful adjustment of surrounding temperatures is occasionally required for optimal plant health.
Regional wintering strategies
Calla lily is extremely heat-loving, and any cold temperatures can cause harm to it. In the autumn, it is recommended to bring outdoor-grown Calla lily indoors and place it near a bright window, but it should be kept at a certain distance from heaters. Maintaining temperatures above {Suitable_growth_temperature_min} during winter is beneficial for plant growth. Any temperatures approaching {Tolerable_growing_temperature_min} are detrimental to the plant.
Important Symptoms
Symptoms of Low Temperature in Calla lily
Calla lily prefers warm temperatures and is not tolerant of low temperatures. It thrives best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, the leaves may lighten in color. After frost damage, the color gradually turns brown or black, and symptoms such as wilting and drooping may occur.
Solutions
Trim off the frost-damaged parts. Immediately move indoors to a warm environment for cold protection. Choose a spot near a south-facing window to place the plant, ensuring ample sunlight. Additionally, avoid placing the plant near heaters or air conditioning vents to prevent excessive dryness in the air.
Symptoms of High Temperature in Calla lily
During summer, Calla lily should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the color of the leaves becomes lighter, and the plant becomes more susceptible to sunburn.
Solutions
Trim away the sunburned and dried-up parts. Move the plant to a location that provides shade from the midday and afternoon sun. Water the plant in the morning and evening to keep the soil moist.
Discover information about plant diseases, toxicity, weed control and more.
Cookie Management Tool
In addition to managing cookies through your browser or device, you can change your cookie settings below.
Necessary Cookies
Necessary cookies enable core functionality. The website cannot function properly without these cookies, and can only be disabled by changing your browser preferences.
Analytical Cookies
Analytical cookies help us to improve our application/website by collecting and reporting information on its usage.
Cookie Name Source Purpose Lifespan
_ga Google Analytics These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here. 1 Year
_pta PictureThis Analytics We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience. 1 Year
Cookie Name
_ga
Source
Google Analytics
Purpose
These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here.
Lifespan
1 Year

Cookie Name
_pta
Source
PictureThis Analytics
Purpose
We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience.
Lifespan
1 Year
Marketing Cookies
Marketing cookies are used by advertising companies to serve ads that are relevant to your interests.
Cookie Name Source Purpose Lifespan
_fbp Facebook Pixel A conversion pixel tracking that we use for retargeting campaigns. Learn more here. 1 Year
_adj Adjust This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here. 1 Year
Cookie Name
_fbp
Source
Facebook Pixel
Purpose
A conversion pixel tracking that we use for retargeting campaigns. Learn more here.
Lifespan
1 Year

Cookie Name
_adj
Source
Adjust
Purpose
This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here.
Lifespan
1 Year
This page looks better in the app
Open