There are plenty of viable ways to supply your Arrowhead plant with water. If you grow your plant in an indoor pot, for the Arrowhead plants in small pots, you can bring your potted plant to your kitchen sink. Then, use the faucet to add water to the container. By holding the pot in your hands, you should easily notice when the water begins to run through the pot’s drainage holes, at which point you can stop watering. The cold temperature will hurt the plants' root system, so please don't do this during winter or in cold climates. Most of the time, watering via your faucet is permissible for the Arrowhead plant. However, if the local tap water contains a high proportion of fluorine, chlorine or salts, you should consider using rainwater or lake water. Also, since the Arrowhead plant can respond well to overhead watering and watering directly into the soil, you can use a watering can, hose, or just about any tool you’d like to water it.

If you discover that you have underwatered your Arrowhead plant, your first step towards remedying the situation is to give your plant some water. Water deeply until excess water runs from the container’s drainage hole, or if you grow outside, water until the soil has become entirely moist. If you find your Arrowhead plant is receiving too much water, begin by reducing your watering schedule. You also want to address the soil and container your Arrowhead plant grows in. If either the soil or the container makes it difficult for water to drain efficiently, your plant will likely become overwatered again. Resolve the issue by moving your plant to looser soils and/or a container with bigger drainage holes or a more porous material. Also check the location of the plant. If the plant is in places like a corner, then it is recommended to move it to a window or around a door to enhance ventilation. Making sure the plants are in a well-ventilated location can reduce the occurrence of overwatering to some extent.

The Arrowhead plant is not a species that requires consistent soil moisture. Instead, it is better to allow this plant’s soil to become dry between waterings. If you are like the many gardeners who grow Arrowhead plants in containers, you can judge whether or not it is time to add water by how dry the soil within the container is. For instance, if about top half of the soil in your container has become dry, it is time to add water. You can feel it by inserting your fingers or sticks into the soil or with soil moisture meter. For those who grow the Arrowhead plant outdoors, you can plan to do your watering about once every other week, provided it has not rained recently.

After waiting for the first several layers of soil surrounding your Arrowhead plant’s root to become dry（top half of the soil）, it is time to add enough water to make them moist again. The amount of water it takes to achieve that goal depends on if you use a container, how large that container is, and how large your plant itself is. For a small Arrowhead plant growing in a small to a medium-sized container, one to two cups may be enough to dampen the soil sufficiently. As you would expect, the volume of water you supply should increase for a larger plant. The best way to make sure your plant has received enough water is to stick your finger or a trowel into the soil and feel whether it is entirely moist. Alternatively, you can water until you see excess water draining from the holes at the bottom of your container.

Overwatering and underwatering are both bad for the health of your Arrowhead plant. These two issues also manifest themselves in subtly different ways when they occur. Arrowhead plant that receives too little water may begin to develop yellow leaves. Underwatering may also cause the leaf margins to become brown and brittle. By contrast, Arrowhead plant that gets overwatered will often show yellow and brown marks on its leaves at the same time. Overwatering can also lead to diseases like root rot, some of which may also be visible on your plant. However, if you know the signs of overwatering and underwatering, you stand a good chance of correcting both issues.

During spring and fall, your watering schedule for the Arrowhead plant will remain relatively the same, which will involve watering this plant about once every week. During summer, you may find that the hot weather causes your plant to need more water than usual, especially if it grows where there is a considerable amount of daily light exposure. In the winter, if it's hard to find some warm places for you plant, your Arrowhead plant will enter a dormant growth phase, in which it will need far less water than usual. At this time, you may get by without watering your plant at all. If you do choose to water during winter, you should not do so more often than once every two to three weeks.

After planting a new, young Arrowhead plant or after transplanting an older Arrowhead plant, you will probably need to give this plant more water than usual. Young plants often need consistent soil moisture during the early stages of their growth to help them adapt to their new growing locations. Transplants also need more water for a brief time to overcome transplant shock. In either case, you may need to water multiple times per week until your plant has exhibited continuous healthy growth. In most situations, your water should be moderate and should never be significant enough to cause overwatering.

There are a few reasons why you may need to water an indoor Arrowhead plant more often than one that grows in the ground outdoors. First, indoor growing settings tend to be drier than outdoor ones, often due to the effect of air conditioning units. While thw size of the pot and the soil determines the warer accumulating ability. Additionally, when your plant grows indoors, it will rely on you entirely for its water By contrast, Arrowhead plant that grows outside can receive water from rain. If you are in an area with high rainfall, you may not have to give it extra watering. When there is not enough rain, you should water additionally to ensure that the soil does not dry out completely.

It is helpful to lightly prune this plant periodically during the spring and summer. When performing this light pruning, you should search for leaves that have wilted, become discolored, show signs of disease, or have died completely. Remove dead or damaged leaves by cutting their petioles, or trimming off stems that have died. This will increase the light and ventilation of the plant and help it to grow. Some gardeners also choose to remove the flower buds of the Arrowhead plant. However, removing flower buds before they open is a strictly aesthetic decision that will emphasize the beauty of this plant’s showy leaves.

You can prune your Arrowhead plant any time you notice dead, diseased, or damaged leaves during the growing season. Once you notice such a leave, locate an unwanted leaf, then follow its stem all the way to the bottom of petiole. Removing dead stems will increase the light and ventilation of the plant and help it to grow. you can cut its stem just above the soil’s surface to remove it. Such pruning can take place as needed during spring and summer. Also, this plant can bloom any time between spring and fall, and some gardeners choose to remove flower buds before they have a chance to open. Removing unopened flower buds allows this plant to focus most of its growing energy on its beautiful leaves. However, pruning in this manner does not necessarily influence the plant’s overall health.

Pruning the Arrowhead plant is as easy as waiting until you notice dead or damaged leaves on your plant. When you recognize these leaves, equip yourself with a pair of sharp and sterile hand pruning shears. Hand pruning shears will work best as larger tools like loppers will not be well suited to the precise cuts you need to make. Once you have a proper set of pruning tools, locate an unwanted leaf, then follow its stem all the way to the bottom of petiole. Removing dead stems will increase the light and ventilation of the plant and help it to grow. Cut the stem just above where it exits the soil to remove it entirely. If you wish to stop this plant from flowering, you can use the same pruning shears to remove any buds before they open. Finally, you may prefer to just trim off dead or damaged portions of the plant, including deadheading spent flowers, to keep it looking its best. This can be done at any time of year. Diseased or damaged stems should be cut right at the soil line and removed completely. Blooms should be cut off just below the flower head.

Since pruning for the Arrowhead plant should take place periodically throughout the season, what you do after pruning can vary. For instance, if you prune to remove selected leaves and stems from your Arrowhead plant, you won’t need to do anything except continue your regular maintenance routine. At times, you may choose to remove healthier leaves and include them in a display of cut flowers and foliage. However, there is no crucial maintenance task to perform for this plant after typical pruning. The only thing to note is that when watering after pruning, you need to be careful not to touch the wound to prevent fungus from infecting the plant through the fresh wound. Placing Arrowhead plant in a well-ventilated location will also help the wounds to dry out and heal in time. The timely replenishment of Arrowhead plant after pruning will help the Arrowhead plant to recover as soon as possible.

For your major pruning, use sharp pruning sheers that will make clean cuts to avoid damaging your plants. As you are pruning your Arrowhead plant, step back occasionally to check the appearance of the plant to make sure it has the shape you want and that you are pruning it symmetrically. If the overall growth of the plant is weak, the flowers need to be pruned back in time for flowering to be able to save nutrients for leaf growth and allow the plant to grow more vigorously.

Unlike plants that require full, indirect sunlight, tropical herbs that prefer full shade need very little direct sunlight to grow. These plants typically require only a few hours of indirect light each day to thrive. While you should still place your full shade tropical herb near a window, it's important to ensure that the plant is never exposed to too much sunlight. If you're growing your full shade tropical herb indoors, you can provide it with the necessary light by placing it near a north-facing window or by using a grow light. A fluorescent or LED grow light can help mimic the soft, dappled light that your plant would receive in its natural environment.

If your full shade tropical herb isn't getting enough sunlight, it may become leggy and weak. The leaves may also start to yellow and drop off, and the plant may stop growing. If you notice any of these signs, try moving your plant to a brighter location or providing it with additional light. Be careful not to expose the plant to direct afternoon sunlight, as this can cause sunburn.

Tropical herbs that prefer full shade can be extremely sensitive to direct sunlight. If your plant is exposed to too much light, the leaves may start to turn yellow or brown and may eventually drop off. Additionally, the plant may become stunted and stop growing. If you notice any signs of sunburn or overexposure to light, move your plant to a shadier location or provide it with additional shade. In conclusion, understanding the sunlight requirements of your tropical herbs is crucial to keeping them healthy and happy. Full shade tropical herbs require only a few hours of indirect light each day to thrive, and ensure that the plant is never exposed to too much sunlight. By providing your plant with the right amount of light and shade, you can help ensure that it grows strong and healthy.

For this tropical plant to thrive, you’ll want to keep them between 75℉ and 90℉ (25-32℃). Each species can handle temperatures outside of this range, but keeping it within several degrees of these limits will ensure they grow to their maximum potential. As for its extreme temperature limits, any environment below 50℉ (10℃) or above 95℉ (35℃) will begin to hinder its growth and cause various aberrations to its leaves and stems. This is especially true with low temperatures; even a light frost can cause your tropical plants to perish. Cellular death can begin to happen at a rapid pace, with some species dying in as little as 12 to 24 hours.

While Arrowhead plant doesn’t require any changes in temperature to enter different growing phases, it is important to stay consistent. Wild temperature fluctuations can slow down its growth regardless of its current phase, so it's always better to keep them in a controlled environment. That optimal temperature range of 75℉ and 90℉ (25-32℃) is vital to maintain, especially staying above the lower limit. Going above 90℉(32℃) isn’t ideal, but as tropical plant it won’t suffer too much. On the other hand, going below 50℉ (10℃) (and especially 40℉/5℃) will begin to directly damage this heat-loving plant species.

Arrowhead plant does not need different temperatures for different growing seasons. The most important step in seasonal care is to keep the environment within the optimal temperature range. That's why it's always best to keep this plant indoors. That way, you can control the temperature no matter what the climate is like outside. Light is also important for tropical species, with all of these plants preferring a partial side level of sun exposure. This means any light they receive needs to be dappled or filtered, with bright but indirect light being the best option when growing your plants indoors. Too much direct sunlight can negatively affect your plant’s leaves, reducing its growth potential.

Tip #1: Don’t Leave Your Plant Near Windows in Colder Months If you want to make sure your plant isn’t exposed to colder temperatures, you may want to keep them away from windows. In colder months like late fall and winter, even the smallest draft can leak cold air into your home through cracks in your windows. While this air usually dissipates and warms up as it travels throughout your home, any plants placed in close proximity to the window will be affected. Move your tropical plants into an area where they will still get bright but indirect light, while making sure they won’t be affected by potential drafts. Tip #2: If You Find Dry Patches, Your Plant May Be Getting Too Much Sunlight or Heat You may notice the leaves become white or even scorched on a sunny day. These discolorations and unusual markings usually indicate that a plant is getting too much heat or sunlight, and it may be dehydrated. Excess light and heat will dry out the soil, stopping plants from getting the moisture they need to support their cellular structure. It also slows down or stops the process of photosynthesis, further hindering growth. If ignored for too long, these dry spots can spread and eventually result in the death of your plants. Tip #3: Avoid Frost at All Costs Colder temperatures and frost can damage your plants by causing ice crystals or disrupt normal physiological activity. This makes it nearly impossible for water to move freely throughout plant tissue, creating a deficit of moisture in their stems and leaves. You can tell a plant has been damaged by frost if it begins to suffer from hydrosis (it will appear as though it's soaked with water.) If the problem persists, your plants may begin shriveling and turning a dark brown or black hue. After that, the plant will almost certainly die.

The best way to maintain the right temperature range for Arrowhead plant is by keeping an eye on both the climate and humidity. You’ll want to try to keep each species in a room where you have access to climate control, keeping the heat in the temperature range best mimics its natural habitat. The humidity levels will also have a direct effect on temperature, so it's important to monitor these as well. You can artificially raise the humidity of your growing space by using a humidifier or lightly misting the leaves with water. If you intend to grow this species outside, you may find it difficult to maintain the right balance of temperature and humidity. If temperatures begin to drop or the air becomes too dry, your best option is to find room within your home and move your plant inside. An indoor growing space will allow you to control the climate more closely, helping your plant reach its full potential.