Search Plants
Try for Free
English
About
Care Guide
Care FAQ
More Info
Pests & Diseases
Distribution
More About How-Tos
Related Plants
European yellow lupine
Lupinus luteus
Also known as : Annual yellow-lupin, Yellow lupine
The plant becomes 30 to 60 cm high. The hand-shaped leaves have five to nine linear, 4 to 6 cm long and 1 to 3 cm wide leaves.
Hardiness Zones
5 to 9
Care Guide for European yellow lupine
Feedback
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Scan QR code to download
European yellow lupine
Sunlight
Full sun
Hardiness Zones
5 to 9
Questions About European yellow lupine
Feedback
Watering 
Pruning 
Sunlight 
Temperature 
Fertilizing What is the best way to water my European yellow lupine?
To water European yellow lupine, you can use a garden hose with a spray nozzle, a watering can, or just about any other common watering tool. Generally, European yellow lupine is not too picky about how they receive their water, as they can live off of rainwater, tap water, or filtered water. Often, you should try not to water this plant from overhead, as doing so can damage the leaves and flowers and may lead to disease as well. At times, the best method for watering this plant is to set up a drip irrigation system. These systems work well for European yellow lupine as they apply water evenly and directly to the soil. For one European yellow lupine that grows in a container, you can use a similar watering approach while changing the tools you use. To water a container-grown European yellow lupine, use a cup, watering can, or your tap to apply water directly to the soil.
Read More ![more]()
What should I do if I water my European yellow lupine too much or too little?
The remedy for underwatering European yellow lupine is somewhat obvious. When you notice that your plant lacks moisture, simply begin watering it on a more regular basis. The issue of overwatering can be a much more dire situation, especially if you fail to notice it early. When your European yellow lupine is overwatered, it may contract diseases that lead to its decline and death. The best way to prevent this outcome is to choose a proper growing location, one that receives plenty of sunlight to help dry the soil and has good enough drainage to allow excess water to drain rather than pooling and causing waterlogged soils. If you overwater your European yellow lupine that lives in a pot, you may need to consider changing it to a new pot. Your previous container may not have contained soil with good drainage or may not have had sufficient drainage holes. As you repot your overwatered European yellow lupine, make sure to add loose soils and to use a pot that drains efficiently.
Read More ![more]()
How often should I water my European yellow lupine?
European yellow lupine needs water regularly throughout the growing season. Beginning in spring, you should plan to water this plant about once per week. As the season presses on and grows warmer, you may need to increase your watering rate to about two to three times per week. Exceeding at this rate can be detrimental to your European yellow lupine. With that said, you should also ensure that the soil in which your European yellow lupine grows remains relatively moist but not wet, regardless of how often you must water to make that the case. Watering European yellow lupine that lives in a pot is a bit different. Generally, you'll need to increase your watering frequency, as the soil in a pot can heat up and dry out a bit faster than ground soil. As such, you should plan to water a container-grown European yellow lupine a few times per week in most cases, versus just once per week for an in-ground plant.
Read More ![more]()
How much water does my European yellow lupine need?
There are a few different ways you can go about determining how much water to give to your European yellow lupine. Some gardeners choose to pick their water volume based on feeling the soil for moisture. That method suggests that you should water until you feel that the first six inches of soil have become moist. Alternatively, you can use a set measurement to determine how much to water your European yellow lupine. Typically, you should give your European yellow lupine about two gallons of water per week, depending on how hot it is and how quickly the soil becomes dry. However, following strict guidelines like that can lead to overwatering if your plant requires less than two gallons per week for whatever reason. When growing European yellow lupine in a container, you will need to use a different method to determine how much water to supply. Typically, you should give enough water to moisten all of the layers of soil that have become dry. To test if that is the case, you can simply stick your finger in the soil to feel for moisture. You can also water the soil until you notice a slight trickle of excess water exiting the drainage holes of your pot.
Read More ![more]()
How can I tell if i'm watering my European yellow lupine enough?
It can be somewhat difficult to avoid overwatering your European yellow lupine. On the one hand, these plants have relatively deep roots that require you to moisten the soil weekly. On the other hand, European yellow lupine are plants that are incredibly susceptible to root rot. Along with root rot, your European yellow lupine may also experience browning as a result of overwatering. Underwatering is far less likely for your European yellow lupine as these plants can survive for a while in the absence of supplemental watering. However, if you go too long without giving this plant water, it will likely begin to wilt. You may also notice dry leaves.
Read More ![more]()
How should I water my European yellow lupine through the seasons?
You can expect your European yellow lupine’s water needs to increase as the season moves on. During spring, you should water about once per week. Then, as the summer heat arrives, you will likely need to give a bit more water to your European yellow lupine, at times increasing to about three times per week. This is especially true of European yellow lupine that grow in containers, as the soil in a container is far more likely to dry out faster than ground soil when the weather is warm. In autumn, while your European yellow lupine is still in bloom, it may need a bit less water as the temperature has likely declined, and the sun is no longer as strong as it was in summer.
Read More ![more]()
How should I water my European yellow lupine at different growth stages?
European yellow lupine will move through several different growth stages throughout the year, some of which may require more water than others. For example, you will probably start your European yellow lupine as a seed. While the seed germinates, you should plant to give more water than your European yellow lupine will need later in life, watering often enough to maintain consistent soil moisture. After a few weeks, your European yellow lupine will grow above the soil and may need slightly less water than at the seedling phase. Then, once this plant is mature, you can begin to use the regular watering frequency of about once per week. As flower development takes place, you may need to give slightly more water to aid the process.
Read More ![more]()
What's the difference between watering European yellow lupine indoors and outdoors?
There are several reasons why most European yellow lupine grow outdoors rather than indoors. The first is that these plants typically grow to tall. The second reason is that European yellow lupine needs more daily sunlight than most indoor growing locations can provide. If you are able to provide a suitable indoor growing location, you may find that you need to give your European yellow lupine water a bit more often than you would in an outdoor growing location. Part of the reason for this is that indoor growing locations tend to be a lot drier than outdoor ones due to HVAC units. The other reason for this is that soil in containers can dry out relatively quickly as well compared to soil in the ground.
Read More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
More Questions People Also Ask
Key Facts About European yellow lupine
Feedback
Attributes of European yellow lupine
Lifespan
Annual, Biennial
Plant Type
Herb
Bloom Time
Spring, Summer
Plant Height
40 cm to 1 m
Leaf Color
Green
Gray
Silver
Flower Size
1.5 cm to 1.8 cm
Flower Color
Yellow
Stem Color
Green
Gray
Silver
Yellow
Leaf type
Deciduous
Ideal Temperature
20 - 35 ℃
Scientific Classification of European yellow lupine
Phylum
Vascular plants
Class
Dicotyledons
Family
Legume
Genus
Lupines
Species
European yellow lupine
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Common Pests & Diseases About European yellow lupine
Feedback
Common issues for European yellow lupine based on 10 million real cases
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Solutions: If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible. For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface. In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well. If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Wilting after blooming
Flowers may wither for a variety of reasons.
Solutions: Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water. Water according to recommendations for each plant's species. Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too. Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants. Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Fire ants
Fire ants gnaw on the roots of plants and are aggressive toward people.
Solutions: Caution: fire ants are venomous and cause painful bites which can be fatal in the case of a rare but significant allergy. Fire ants can be a painful pest to have around for you and your plants. Keeping them under control will ensure comfortable gardening for all. For less severe cases: Physically remove mounds. Dig out and remove entire mounds (remember, they go deeper than they seem). Use citrus oil. Pour citrus oil, which is toxic to fire ants, down their holes. For severe cases: Use ant bait. For a chemical solution, broadcast insecticide bait formulated for fire ants in the area around a mound. Apply the bait during a dry evening so the ants can forage for it at night. Look for products that contain Indoxacarb. Release phorid flies. Introduce or promote beneficial phorid flies to gardens. These parasitic flies attack invasive fire ants. Hire a professional. Some ant baits are only available to professional exterminators. For serious cases of fire ants, consider hiring a professional.
Powdery Mildew
Powdery mildew is a white mold that appears on leaves. It can be wiped away.
Solutions: As powdery Mildew spores are transported by the wind, it can be tricky to put a complete stop to the spread of the fungus. Luckily, there are several easy treatments for plants that are exhibiting symptoms: If powdery Mildew seems to be impacting isolated leaves or stems, they can simply be trimmed away and disposed of. Disinfect pruning tools after doing this. Remove any plant debris from the ground around the infected plants and dispose of it in the garbage. Then, cover the soil with a thick layer of mulch to limit reinfection. Milk sprays have been found to be useful in controlling powdery Mildew. Make up a spray consisting of 60% water and 40% milk and spray on the affected plants. This can also be used as a preventative measure. In cases where powdery Mildew is more widespread, plants can be sprayed with a mild sulfur- or copper-based fungicide or a non-toxic solution made from baking soda and soap. Sprays can help areas that have been recently infected, though they are less effective against well-established infections. If possible, try transplanting the plants to a sunnier location. Though powdery Mildew does fine in hot, dry conditions, it is unable to reproduce without some humidity. Putting plants in more direct sunlight can help stop the spread of the fungus. Trimming around closely-packed plants can help improve airflow, which also prevents the reproduction of the fungus.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Overview
Flower withering occurs when flowers become weak, droopy, wilted, or faded until they can’t be revived. During withering, they begin to wrinkle and shrink until the flower becomes completely dry or dead.
Any flowers, regardless of the plant type or the climate they are grown in, are susceptible to withering. It is a worldwide problem across houseplants, herbs, flowering ornamentals, trees, shrubs, garden vegetables, and food crops.
Unlike wilting—which withering is often confused with—withering can be caused by different things and is often due to more than a lack of water. Withering can be fatal in severe cases.
Symptom Analysis
Flower withering progresses from very mild cases to severe occurrences that kill the flower. The severity of the symptoms is related to the cause and how long the condition is allowed to progress before action is taken.
- Wilted, droopy flowers
- Petals and leaves begin to wrinkle
- Brown papery streaks or spots appear on the petals and leaf tips
- Flowerhead shrink in size
- Petal color fades
- Yellowing leaves
- Complete death of the flower
Disease Cause
The main causes of flower withering include natural age progress, lack of water, nutritional deficiencies, and bacterial or fungal diseases. It’s critical to determine the underlying cause when flower withering is noticed. This will guide the best course of action, if treatment is possible.
Check the soil for moisture and then closely examine the entire plant for signs of nutrient deficiencies. If neither of those appears to be the cause then cut open the stem below a flower. If a cross-section reveals brown or rust-colored stains it is safe to assume that this is a bacterial or fungal infection.
If the flower is nearing the end of its normal lifespan, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence, or cell aging and death. Cell division stops and the plant begins breaking down resources within the flower to use in other parts of the plant.
In all other cases, flower withering happens when the plant seals off the stem as a defense mechanism, stopping transport within the vascular system. This prevents further water loss through the flowers but also stops bacteria and fungi from moving to healthy parts of the plant. Once water and nutrient transport stops, the flower begins to wither and ultimately die.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Wilting after blooming
Flowers may wither for a variety of reasons.
Overview
Wilting after blooming is sometimes a natural aging process of the flower, while other times it may indicate a problem. Orchids, for example, can bloom for anywhere from two weeks to three months, so wilting after a few days signals a problem for most varieties. This can happen to virtually any ornamental flowering plant, but those with shallow roots and limited tolerance for drought, full sun, and low humidity are more susceptible.
This is a common problem, and often has an easy fix. Sometimes, however, it is the result of more serious causes such as pests or disease of the root system.
Symptom Analysis
- At first, flowers may look a little limp.
- Petals may start to appear dried out and turn brown.
- Eventually they may drop off the plant all together.
Disease Cause
Wilting blooms can be a sign of an unhealthy root system. Any condition that prevents the plant from absorbing enough water and nutrition can result in wilting blooms and sometimes other symptoms. If the plant doesn’t have enough water, it cannot maintain appropriate pressure within stems, leaves, and blooms, causing them to wilt.
This can result from physical damage – for example from root breakage during re-potting or attack by insects like cutworms. If you recently re-potted your plant, physical damage to the roots is a likely cause. If you see insects, they may be eating leaves, roots, or flowers. Fungal infections can also cause root rot and damage, preventing water and nutrient uptake.
Finally, wilting blooms can result simply from age. If no other symptoms are visible, it may simply signal the natural end of the flower’s lifespan. If it seems premature, this may be caused by environmental factors: water, humidity, light, or stress. Under-watering is a common cause. Similarly, plants adapted to high humidity dry out easily when humidity is low, like during winter or in dry climates. Too much light can also stress plants that need shade, causing blooms to wilt.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Fire ants
Fire ants gnaw on the roots of plants and are aggressive toward people.
Overview
Fire ants are a group of ants that are known for their aggressive behavior and painful stings. Some fire ants are native and others are invasive from other countries. Once they reach plants, they climb them and chew away at leaves and flower buds.
Fire ants also kill and eat beneficial insects such as caterpillars, ladybugs, mantis, and native ants. They can be a problem any time temperatures are above freezing, but new infestations are most likely to appear when brought in via contaminated material such as potting soil or mulch, or when insecticides have harmed populations of beneficial insects that would otherwise control populations of fire ants.
They can be difficult to control, especially once populations become large. Plant damage is typically minor, but fire ants can destroy seedlings.
Symptom Analysis
The number one symptom of fire ants is seeing the ants themselves which are red or black in color. Ant mounds in the ground are also signs. Fire ant mounds rarely exceed 46 cm in diameter. If a fire ant mound is disturbed, many fast-moving, aggressive ants will emerge. These ants will bite and then painfully sting.
Even if no ants are visible, their damage might be apparent. Chewed leaf and flower edges might indicate fire ants. Fully eaten seedlings are another sign.
Solutions
Caution: fire ants are venomous and cause painful bites which can be fatal in the case of a rare but significant allergy.
Fire ants can be a painful pest to have around for you and your plants. Keeping them under control will ensure comfortable gardening for all.
For less severe cases:
- Physically remove mounds. Dig out and remove entire mounds (remember, they go deeper than they seem).
- Use citrus oil. Pour citrus oil, which is toxic to fire ants, down their holes.
For severe cases:
- Use ant bait. For a chemical solution, broadcast insecticide bait formulated for fire ants in the area around a mound. Apply the bait during a dry evening so the ants can forage for it at night. Look for products that contain Indoxacarb.
- Release phorid flies. Introduce or promote beneficial phorid flies to gardens. These parasitic flies attack invasive fire ants.
- Hire a professional. Some ant baits are only available to professional exterminators. For serious cases of fire ants, consider hiring a professional.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Powdery Mildew
Powdery mildew is a white mold that appears on leaves. It can be wiped away.
Overview
Powdery Mildew is a common disease and the scourge of many home gardeners. It affects a large variety of plants including many varieties of vegetables. The disease is easy to identify but not always easy to get rid of once it has started to infect plants.
Powdery Mildew thrives in warm, humid conditions and can quickly spread from plant to plant. Although this disease will not kill the plants, a severe infestation will inhibit plant growth and fruit production.
Symptom Analysis
Powdery Mildew appears as pale yellow spots on leaves. These spots then become white and look powdery. The fungus spreads quickly both on the top and underside of the leaves and on the plant stems.
These white, powdery spots will join up and soon, almost the entire surface of the leaf appears white. Eventually, the edges of the leaf will turn brown and dry and start to die.
In severe infections, even the flower buds will turn white and become disfigured. Fruit will ripen prematurely and be inedible.
Disease Cause
Powdery Mildew is caused by a fungus. There are many different genera of fungus diseases that cause powdery Mildew. The fungal spores overwinter inside leaf buds and on plant material that has dropped to the soil below. As the weather warms up, these spores are then carried onto the plant by water, wind, and insects. Powdery Mildew can also be more severe in areas that experience warm, dry climates, even though the spores require some humidity to germinate.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Distribution of European yellow lupine
Feedback
Habitat of European yellow lupine
Degraded scrub lands, abandoned fields, road sides
Distribution Map of European yellow lupine
European yellow lupine is indigenous to parts of the Mediterranean region. It has been introduced and often cultivated in various areas across Europe, Africa, Asia, and Oceania. While european yellow lupine thrives in its native range, it has adapted to diverse climates in its introduced regions, where it continues to be actively grown.
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info on European Yellow Lupine Growth and Care
Feedback
Basic Care Guide
Lighting
Full sun
European yellow lupine flourishes in areas where sun exposure is almost constant throughout the day, but can adapt to locations where sunlight is distributed unevenly. Its healthy growth is tied to ample sun. Over or under exposure to sunlight can hinder its robustness, related to its native open-field habitat.
Best Sunlight Practices 
Temperature
0 - 38 ℃
European yellow lupine is indigenous to settings where temperatures range from 68 to 95°F (20 to 35℃). Its preference lies within this warm range, and adjustments should be made to match this in cooler seasons.
Temp for Healthy Growth Plants Related to European yellow lupine
Feedback
Flat-stem pondweed
Potamogeton compressus produces a strongly flattened, robust, branching stem up to 90 cm in maximum length . It grows annually from turions and seed, producing bushy plants branching near the surface with long, rather grass-like leaves that are 9 to 24 cm long and 3 to 6 mm wide and olive-green or dark green, sometimes with a reddish tinge near the surface.
Five-stamen tamarisk
Five-stamen tamarisk (Tamarix chinensis) is a deciduous shrub native to China and Korea. It is considered a noxious invasive plant in many areas of the United States. It grows fast and is highly adaptive to a variety of environments. It depletes the moisture and nutrients in the soil harming native plants growing in the same area. Produces pinkish-white flowers from spring to fall.
Field wormwood
A member of the aster or sunflower family, field wormwood is also known as field mugwort. This plant is aromatic and grows nodding flowers that do not have petals. It grows as a biennial in sunny, dry soils.
Field brome
Field brome is an annual grass that is found in pastures, rangelands, wheat fields, and roadsides. It is an aggressively invasive grass that is reducing the biodiversity of these habitats. However, it was introduced because it can benefit the landscape by controlling erosion and improving the soil.
False mayweed
The false mayweed is also called "scentless mayweed" and "false chamomile" because it resembles the chamomile plant but does not give off its characteristic scent. False mayweed is pollinated by solitary bees. Mayweed species are a part of the sunflower family and include Lebanese, Turkish, and Chinese strains.
European Speedwell
European Speedwell is a small, perennial groundcover that thrives in damp locations. This low maintenance native plant grows well along pond borders and attracts pollinators with its blue or pink flowers.
Poison ivy
In pop culture, poison ivy is a symbol of an obnoxious weed because, despite its unthreatening looks, it gives a highly unpleasant contact rash to the unfortunate person who touches it. Still, it is commonly eaten by many animals, and the seeds are a favorite with birds. The leaves turn bright red in fall. Its sister species, Western poison ivy (Toxicodendron rydbergii), is not considered to be invasive in the United States, but is noxious in Australia and New Zealand.
Pokeweed
Although its berries look juicy and tempting, the fruits and the root of pokeweed are toxic and should not be eaten. Pokeweed is considered a pest species by farmers but is nevertheless often grown as an ornamental plant. Its berries can be made into pokeberry ink as well.
View More Plants
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
About
Care Guide
Care FAQ
More Info
Pests & Diseases
Distribution
More About How-Tos
Related Plants
European yellow lupine
Lupinus luteus
Also known as: Annual yellow-lupin, Yellow lupine
The plant becomes 30 to 60 cm high. The hand-shaped leaves have five to nine linear, 4 to 6 cm long and 1 to 3 cm wide leaves.
Hardiness Zones
5 to 9
Care Guide for European yellow lupine
Feedback
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
Download
Questions About European yellow lupine
Feedback
Watering Pruning Sunlight Temperature Fertilizing What is the best way to water my European yellow lupine?
What should I do if I water my European yellow lupine too much or too little?
How often should I water my European yellow lupine?
How much water does my European yellow lupine need?
How can I tell if i'm watering my European yellow lupine enough?
How should I water my European yellow lupine through the seasons?
How should I water my European yellow lupine at different growth stages?
What's the difference between watering European yellow lupine indoors and outdoors?
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
Download the App
More Questions People Also Ask
Key Facts About European yellow lupine
Feedback
Attributes of European yellow lupine
Lifespan
Annual, Biennial
Plant Type
Herb
Bloom Time
Spring, Summer
Plant Height
40 cm to 1 m
Leaf Color
Green
Gray
Silver
Flower Size
1.5 cm to 1.8 cm
Flower Color
Yellow
Stem Color
Green
Gray
Silver
Yellow
Leaf type
Deciduous
Ideal Temperature
20 - 35 ℃
Gain more valuable plant knowledge
Explore a rich botanical encyclopedia for deeper insights
Download the App
Scientific Classification of European yellow lupine
Phylum
Vascular plants Class
Dicotyledons Family
Legume Genus
Lupines Species
European yellow lupine 
Never miss a care task again!
Plant care made easier than ever with our tailor-made smart care reminder.
Download the App
Common Pests & Diseases About European yellow lupine
Feedback
Common issues for European yellow lupine based on 10 million real cases
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Solutions: If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible. For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface. In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well. If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Learn More About the Flower withering ![more]()
Wilting after blooming
Flowers may wither for a variety of reasons.
Solutions: Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water. Water according to recommendations for each plant's species. Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too. Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants. Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Learn More About the Wilting after blooming ![more]()
Fire ants
Fire ants gnaw on the roots of plants and are aggressive toward people.
Solutions: Caution: fire ants are venomous and cause painful bites which can be fatal in the case of a rare but significant allergy. Fire ants can be a painful pest to have around for you and your plants. Keeping them under control will ensure comfortable gardening for all. For less severe cases: Physically remove mounds. Dig out and remove entire mounds (remember, they go deeper than they seem). Use citrus oil. Pour citrus oil, which is toxic to fire ants, down their holes. For severe cases: Use ant bait. For a chemical solution, broadcast insecticide bait formulated for fire ants in the area around a mound. Apply the bait during a dry evening so the ants can forage for it at night. Look for products that contain Indoxacarb. Release phorid flies. Introduce or promote beneficial phorid flies to gardens. These parasitic flies attack invasive fire ants. Hire a professional. Some ant baits are only available to professional exterminators. For serious cases of fire ants, consider hiring a professional.
Learn More About the Fire ants ![more]()
Powdery Mildew
Powdery mildew is a white mold that appears on leaves. It can be wiped away.
Solutions: As powdery Mildew spores are transported by the wind, it can be tricky to put a complete stop to the spread of the fungus. Luckily, there are several easy treatments for plants that are exhibiting symptoms: If powdery Mildew seems to be impacting isolated leaves or stems, they can simply be trimmed away and disposed of. Disinfect pruning tools after doing this. Remove any plant debris from the ground around the infected plants and dispose of it in the garbage. Then, cover the soil with a thick layer of mulch to limit reinfection. Milk sprays have been found to be useful in controlling powdery Mildew. Make up a spray consisting of 60% water and 40% milk and spray on the affected plants. This can also be used as a preventative measure. In cases where powdery Mildew is more widespread, plants can be sprayed with a mild sulfur- or copper-based fungicide or a non-toxic solution made from baking soda and soap. Sprays can help areas that have been recently infected, though they are less effective against well-established infections. If possible, try transplanting the plants to a sunnier location. Though powdery Mildew does fine in hot, dry conditions, it is unable to reproduce without some humidity. Putting plants in more direct sunlight can help stop the spread of the fungus. Trimming around closely-packed plants can help improve airflow, which also prevents the reproduction of the fungus.
Learn More About the Powdery Mildew ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App
Flower withering
Flowers may dry out due to a sudden change in environment or because the plant has completed its normal flowering period.
Overview
Flower withering occurs when flowers become weak, droopy, wilted, or faded until they can’t be revived. During withering, they begin to wrinkle and shrink until the flower becomes completely dry or dead.
Any flowers, regardless of the plant type or the climate they are grown in, are susceptible to withering. It is a worldwide problem across houseplants, herbs, flowering ornamentals, trees, shrubs, garden vegetables, and food crops.
Unlike wilting—which withering is often confused with—withering can be caused by different things and is often due to more than a lack of water. Withering can be fatal in severe cases.
Symptom Analysis
Flower withering progresses from very mild cases to severe occurrences that kill the flower. The severity of the symptoms is related to the cause and how long the condition is allowed to progress before action is taken.
- Wilted, droopy flowers
- Petals and leaves begin to wrinkle
- Brown papery streaks or spots appear on the petals and leaf tips
- Flowerhead shrink in size
- Petal color fades
- Yellowing leaves
- Complete death of the flower
Disease Cause
The main causes of flower withering include natural age progress, lack of water, nutritional deficiencies, and bacterial or fungal diseases. It’s critical to determine the underlying cause when flower withering is noticed. This will guide the best course of action, if treatment is possible.
Check the soil for moisture and then closely examine the entire plant for signs of nutrient deficiencies. If neither of those appears to be the cause then cut open the stem below a flower. If a cross-section reveals brown or rust-colored stains it is safe to assume that this is a bacterial or fungal infection.
If the flower is nearing the end of its normal lifespan, genetic coding within the plant increases the production of ethylene, a phytohormone that controls senescence, or cell aging and death. Cell division stops and the plant begins breaking down resources within the flower to use in other parts of the plant.
In all other cases, flower withering happens when the plant seals off the stem as a defense mechanism, stopping transport within the vascular system. This prevents further water loss through the flowers but also stops bacteria and fungi from moving to healthy parts of the plant. Once water and nutrient transport stops, the flower begins to wither and ultimately die.
Solutions
If flower withering is a natural progression due to age, there is nothing that can be done to slow or stop the process. Once hormones within the plant begin the process of senescence, it’s irreversible.
For lack of water, immediately water the plant using room temperature rainwater, bottled spring water, or filtered tap water. Water container plants until excess water drains out the bottom; water in-ground plants until the soil is soaked but there isn’t standing water on the surface.
In the event of nutritional deficiencies, the best solution is to use a granular or water-soluble liquid fertilizer, and apply it to the soil at about half the recommended dosage. Keep it off the leaves and make sure granular products are watered into the soil well.
If the plant is infected with a bacterial or fungal pathogen, there is no course of treatment that cures the diseased plants. The best solution is to remove the infected plants and dispose of the plant material off-site. Do not put in a compost pile.
Prevention
This is definitely one of those instances where prevention is more effective than cure. Here are some preventative measures for avoiding premature flower withering.
- Water plants according to their needs -- either keep the soil slightly moist or allow the top inch or two to dry out before watering again.
- Fertilize lightly on a consistent basis, depending upon the plant’s growth. Quick-growing plants and those that flower or develop fruit will need more frequent fertilizing than slow-growing plants.
- Purchase plants that are certified disease- or pathogen-free.
- Look for disease-resistant cultivars.
- Isolate plants showing disease symptoms to prevent the spread to neighboring plants.
- Practice good plant hygiene by removing any fallen plant material as soon as possible.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Wilting after blooming
Flowers may wither for a variety of reasons.
Overview
Wilting after blooming is sometimes a natural aging process of the flower, while other times it may indicate a problem. Orchids, for example, can bloom for anywhere from two weeks to three months, so wilting after a few days signals a problem for most varieties. This can happen to virtually any ornamental flowering plant, but those with shallow roots and limited tolerance for drought, full sun, and low humidity are more susceptible.
This is a common problem, and often has an easy fix. Sometimes, however, it is the result of more serious causes such as pests or disease of the root system.
Symptom Analysis
- At first, flowers may look a little limp.
- Petals may start to appear dried out and turn brown.
- Eventually they may drop off the plant all together.
Disease Cause
Wilting blooms can be a sign of an unhealthy root system. Any condition that prevents the plant from absorbing enough water and nutrition can result in wilting blooms and sometimes other symptoms. If the plant doesn’t have enough water, it cannot maintain appropriate pressure within stems, leaves, and blooms, causing them to wilt.
This can result from physical damage – for example from root breakage during re-potting or attack by insects like cutworms. If you recently re-potted your plant, physical damage to the roots is a likely cause. If you see insects, they may be eating leaves, roots, or flowers. Fungal infections can also cause root rot and damage, preventing water and nutrient uptake.
Finally, wilting blooms can result simply from age. If no other symptoms are visible, it may simply signal the natural end of the flower’s lifespan. If it seems premature, this may be caused by environmental factors: water, humidity, light, or stress. Under-watering is a common cause. Similarly, plants adapted to high humidity dry out easily when humidity is low, like during winter or in dry climates. Too much light can also stress plants that need shade, causing blooms to wilt.
Solutions
- Check the soil or potting medium. Coarse textures can allow water to drain too rapidly, preventing the plant from taking up enough. If the soil and roots seem very dry, add sphagnum moss or other mediums that hold water.
- Water according to recommendations for each plant's species.
- Low humidity can be corrected by misting the plant regularly or placing it near a humidifier. Keeping it near other plants helps, too.
- Keep the environment consistent in terms of temperature, humidity, and lighting. Keep it away from vents, heaters, and air conditioners, and avoid moving it to locations where it will experience a temperature shock. Hot, dry heat, and cold drafts are problematic for many plants.
- Especially if the plant is outside, it could be experiencing heat or light stress. Try moving it to a shadier location.
Prevention
- Read up on moisture, light, and soil type preferences for each plant to avoid underwatering, incorrect light levels, or other conditions that can cause wilting blooms.
- Avoid re-potting during the flowering period. This causes additional stress on the plants because they need to repair root damage and adapt to the new micro-environment, all of which can result in wilting.
- One other potential cause is ethylene gas, a plant hormone related to ripening. Some fruits and vegetables emit ethylene, especially bananas. Apples, grapes, melons, avocados, and potatoes can also give it off, so keep flowering plants away from fresh produce.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Fire ants
Fire ants gnaw on the roots of plants and are aggressive toward people.
Overview
Fire ants are a group of ants that are known for their aggressive behavior and painful stings. Some fire ants are native and others are invasive from other countries. Once they reach plants, they climb them and chew away at leaves and flower buds.
Fire ants also kill and eat beneficial insects such as caterpillars, ladybugs, mantis, and native ants. They can be a problem any time temperatures are above freezing, but new infestations are most likely to appear when brought in via contaminated material such as potting soil or mulch, or when insecticides have harmed populations of beneficial insects that would otherwise control populations of fire ants.
They can be difficult to control, especially once populations become large. Plant damage is typically minor, but fire ants can destroy seedlings.
Symptom Analysis
The number one symptom of fire ants is seeing the ants themselves which are red or black in color. Ant mounds in the ground are also signs. Fire ant mounds rarely exceed 46 cm in diameter. If a fire ant mound is disturbed, many fast-moving, aggressive ants will emerge. These ants will bite and then painfully sting.
Even if no ants are visible, their damage might be apparent. Chewed leaf and flower edges might indicate fire ants. Fully eaten seedlings are another sign.
Solutions
Caution: fire ants are venomous and cause painful bites which can be fatal in the case of a rare but significant allergy.
Fire ants can be a painful pest to have around for you and your plants. Keeping them under control will ensure comfortable gardening for all.
For less severe cases:
- Physically remove mounds. Dig out and remove entire mounds (remember, they go deeper than they seem).
- Use citrus oil. Pour citrus oil, which is toxic to fire ants, down their holes.
For severe cases:
- Use ant bait. For a chemical solution, broadcast insecticide bait formulated for fire ants in the area around a mound. Apply the bait during a dry evening so the ants can forage for it at night. Look for products that contain Indoxacarb.
- Release phorid flies. Introduce or promote beneficial phorid flies to gardens. These parasitic flies attack invasive fire ants.
- Hire a professional. Some ant baits are only available to professional exterminators. For serious cases of fire ants, consider hiring a professional.
Prevention
Fire ants become more difficult to control as they establish themselves, so try to prevent them or treat them early.
- Monitor new material. Do not bring in any soil or plants from known infested areas, unless if they are "Quarantine Approved." Make sure to check new material for fire ants.
- Apply insecticide. Some warm and humid areas have high fire ants populations. In these areas, spread a granular fire ants insecticide such as Varsity in the spring near gardens to prevent these unwelcome visitors.
- Treat early. Spot treat at the first sight of any fire ants mound, as larger mounds are more difficult to treat.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Powdery Mildew
Powdery mildew is a white mold that appears on leaves. It can be wiped away.
Overview
Powdery Mildew is a common disease and the scourge of many home gardeners. It affects a large variety of plants including many varieties of vegetables. The disease is easy to identify but not always easy to get rid of once it has started to infect plants.
Powdery Mildew thrives in warm, humid conditions and can quickly spread from plant to plant. Although this disease will not kill the plants, a severe infestation will inhibit plant growth and fruit production.
Symptom Analysis
Powdery Mildew appears as pale yellow spots on leaves. These spots then become white and look powdery. The fungus spreads quickly both on the top and underside of the leaves and on the plant stems.
These white, powdery spots will join up and soon, almost the entire surface of the leaf appears white. Eventually, the edges of the leaf will turn brown and dry and start to die.
In severe infections, even the flower buds will turn white and become disfigured. Fruit will ripen prematurely and be inedible.
Disease Cause
Powdery Mildew is caused by a fungus. There are many different genera of fungus diseases that cause powdery Mildew. The fungal spores overwinter inside leaf buds and on plant material that has dropped to the soil below. As the weather warms up, these spores are then carried onto the plant by water, wind, and insects. Powdery Mildew can also be more severe in areas that experience warm, dry climates, even though the spores require some humidity to germinate.
Solutions
As powdery Mildew spores are transported by the wind, it can be tricky to put a complete stop to the spread of the fungus. Luckily, there are several easy treatments for plants that are exhibiting symptoms:
- If powdery Mildew seems to be impacting isolated leaves or stems, they can simply be trimmed away and disposed of. Disinfect pruning tools after doing this.
- Remove any plant debris from the ground around the infected plants and dispose of it in the garbage. Then, cover the soil with a thick layer of mulch to limit reinfection.
- Milk sprays have been found to be useful in controlling powdery Mildew. Make up a spray consisting of 60% water and 40% milk and spray on the affected plants. This can also be used as a preventative measure.
- In cases where powdery Mildew is more widespread, plants can be sprayed with a mild sulfur- or copper-based fungicide or a non-toxic solution made from baking soda and soap. Sprays can help areas that have been recently infected, though they are less effective against well-established infections.
- If possible, try transplanting the plants to a sunnier location. Though powdery Mildew does fine in hot, dry conditions, it is unable to reproduce without some humidity. Putting plants in more direct sunlight can help stop the spread of the fungus.
- Trimming around closely-packed plants can help improve airflow, which also prevents the reproduction of the fungus.
Prevention
There are a few ways to prevent a powdery Mildew infection from occurring in the first place:
- Preemptive chemical controls, including fungicides and non-toxic solutions, can help prevent powdery Mildew from becoming established on plants.
- When placing new plants, allow enough space between each one to provide adequate air circulation.
- Water at the base of plants rather than from overhead.
- Many mildew-resistant strains of common garden plants are available. Consider these in areas that have a Mediterranean climate.
- Powdery Mildew can form tiny, round black structures, called cleistothecia, as the growing season draws to a close. These hardy, dry structures help the fungus survive winter. Raking away debris over the winter can remove stowaway cleistothecia and will help prevent plants from being reinfected.
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Distribution of European yellow lupine
Feedback
Habitat of European yellow lupine
Degraded scrub lands, abandoned fields, road sides
Distribution Map of European yellow lupine
European yellow lupine is indigenous to parts of the Mediterranean region. It has been introduced and often cultivated in various areas across Europe, Africa, Asia, and Oceania. While european yellow lupine thrives in its native range, it has adapted to diverse climates in its introduced regions, where it continues to be actively grown.
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info on European Yellow Lupine Growth and Care
Basic Care Guide
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Continue reading in our app - it's better
A database of 400000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Full sun
Ideal
Above 6 hours sunlight
Partial sun
Tolerance
About 3-6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
European yellow lupine flourishes in areas where sun exposure is almost constant throughout the day, but can adapt to locations where sunlight is distributed unevenly. Its healthy growth is tied to ample sun. Over or under exposure to sunlight can hinder its robustness, related to its native open-field habitat.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Symptoms of Insufficient Light in %s
European yellow lupine, a plant that thrives in full sunlight, is commonly grown outdoors with ample sunlight. When cultivated indoors with inadequate light, it may exhibit subtle symptoms of light deficiency.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your European yellow lupine may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
European yellow lupine enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Symptoms of Excessive light in %s
European yellow lupine thrives in full sun exposure and can tolerate intense sunlight. With their remarkable resilience, symptoms of sunburn may not be easily visible, as they rarely suffer from it.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover information about plant diseases, toxicity, weed control and more.
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
European yellow lupine is indigenous to settings where temperatures range from 68 to 95°F (20 to 35℃). Its preference lies within this warm range, and adjustments should be made to match this in cooler seasons.
Regional wintering strategies
European yellow lupine has strong cold resistance, so special frost protection measures are usually not necessary during winter. However, if the winter temperatures are expected to drop below {Limit_growth_temperature}, it is still important to provide cold protection. This can be achieved by covering the plant with materials such as soil or straw. Before the first freeze in autumn, it is recommended to water the plant abundantly, ensuring the soil remains moist and enters a frozen state. This helps prevent drought and water scarcity for the plant during winter and early spring.
Important Symptoms
Symptoms of Low Temperature in European yellow lupine
European yellow lupine is cold-tolerant and thrives best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, although there may not be any noticeable changes during winter, there may be a decrease in sprouting or even no sprouting during springtime.
Solutions
In spring, remove any parts that have failed to sprout.
Symptoms of High Temperature in European yellow lupine
During summer, European yellow lupine should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the leaves of the plant may become lighter in color, prone to curling, susceptible to sunburn, and in severe cases, the entire plant may wilt and become dry.
Solutions
Trim away the sunburned and dried-up parts. Move the plant to a location that provides shade from the midday and afternoon sun, or use a shade cloth to create shade. Water the plant in the morning and evening to keep the soil moist.
Discover information about plant diseases, toxicity, weed control and more.
