About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
Distribution
More Info
Related Plants
Related Articles
Add to My Garden Asian Rice
Oryza sativa
Asian Rice is one of the world's most important staple crops. This annual grass, which was first domesticated in China centuries ago, accounts for a significant portion of the diet of half of the world's population. Aside from food, this plant is grown for use in wines, medicines, and cosmetics. It is also used in crafts and religious ceremonies worldwide. 
Hardiness Zones
10 to 12
Care Guide for Asian Rice
Loam, Clay, Sand, Alkaline
Full sun
10 to 12
Early spring, Mid spring
Late summer
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Scan QR code to download
Asian Rice
Sunlight
Full sun
Hardiness Zones
10 to 12
Planting Time
Early spring, Mid spring
Download and print this plant care card and attach it to your plants
Download
Asian Rice
Sunlight
Full sun
Hardiness Zones
10 to 12
Planting Time
Early spring, Mid spring
Download
Asian Rice
Sunlight
Full sun
Hardiness Zones
10 to 12
Planting Time
Early spring, Mid spring
Download
Questions About Asian Rice
Sunlight 
Temperature How much sunlight should Asian Rice get per day to grow healthily?
Asian Rice requires about 6 hours of direct and continuous sunlight daily. These are desirable to help them grow healthily, and this will help them grow faster. You might also want to provide these species with supplemental light during the winter with the help of lamps. The species need several hours of unobstructed sunlight to have vibrant foliage, so you might want to place them in the brightest areas of your garden or indoor nursery.
Read More ![more]()
What type of sunlight does Asian Rice need?
They are suited to a full sun and don't tend to tolerate shady areas. It's best to have at least 8 inches of space for each plant especially if you’re planting a lot of them so each can get a lot of sunlight. Generally, the Asian Rice has a high demand for direct, full, and abundant sunlight. During summers, you can place them outside in the morning sun, so they will have enough light to grow.
They don't do well with partial sunlight and don't tolerate filtered or part shade. They might also not grow well when a huge tree constantly provides shade, so plant them in areas without obstruction.
Read More ![more]()
Should I protect Asian Rice from sun exposure?
The Asian Rice should never avoid sun exposure because they seek and love the bright light. They love the sun so much that they require at least 6 hours of exposure regardless of the climate. Some areas, especially during the fall and spring, don't need protection because they require full sunlight. However, if you're located in a tropical climate or if the summer sun is too much, it's always possible to transfer the potted species inside until the temperature cools down again. Overall, you don't need to plant them near buildings, tall trees, and other structures because they need full sun for at least 6 hours.
Read More ![more]()
What will happen if Asian Rice gets inadequate sunlight?
If there's insufficient light, the Asian Rice will not thrive. This is going to result in poor growth. Fungi and bacteria can feed on the plants' tissues, which are generally common for the plants grown in shady areas.
When the plants receive too little sunlight, they tend to become spindly. They will have weaker stems because they are constantly seeking to receive light, and this can result in wilting or brown leaves. You might want to see if there are insects present or a rhizome rot in Asian Rice as this can be another sign that they are not receiving enough sunlight. If this is the case, put them in another area where they will receive bright and direct light to see if it will make a difference.
Read More ![more]()
Does Asian Rice need special care about sunlight during its different growth stages?
During their growing phase, you need to expose the plants to the sun so that they don't have to stretch and grow upwards. You can avoid the process of etiolation and prevent the stems of Asian Rice from growing weak. This is generally prevalent for those that are receiving no sun or are in a partially shaded area when they are young.
When they are already established and have matured, you also need to continuously expose them to a full sun because they need photosynthesis to grow more. When they are placed inside a greenhouse or a nursery for a very long time, and you decide to transfer them into a garden, you need to gradually introduce them to the bright lights. Still, you should never suddenly place them in direct heat, especially if it's mid-afternoon. They need a period to adapt and to become used to the intensity of sunlight in your area, so give them some much-needed time.
Read More ![more]()
How much light does Asian Rice need for photosynthesis?
As mentioned, the Asian Rice needs 6 to 7 hours of direct sunlight to do the process of photosynthesis. This helps them produce enough food to grow. You can make this easier for yourself when you group them together and plant them in the same spot in your garden. This way, they will get enough of their light requirements to produce flowers, grow sturdy stems, and produce the glucose that they need for their food.
Read More ![more]()
How to protect Asian Rice from sun and heat damage?
As mentioned, the Asian Rice loves the sun, but sometimes too much can hurt it. However, too much harsh sunlight can actually burn the leaves in the summer. When planted in the ground, you might want to add to their watering schedule so they will have protection. Exposure to the blades can result in sunburn, especially when the day's sun is too strong. It's highly recommended to spray some water to cool down the leaves a bit.
Read More ![more]()
Are there any cautions or tips for sunlight and Asian Rice?
You need to minimize transplanting shock, especially for the young and newly-planted Asian Rice. These species will need time to adjust to their new environment but make sure to choose a location where they will get the full sunlight they need. The amount of sunlight matters as well as the season. Water them during the hottest days to reduce stress, and you might want to cover the young ones when the temperatures are extremely high. Row covers and shade cloths might be applicable for the younger ones, but the mature plants might not need them, especially if they already have established roots and stems. When you see that the Asian Rice begins to lose its color, this might be because it is not receiving enough sunlight to do photosynthesis. There's not enough chlorophyll to depict a green color; if this is the case, you need to transfer it to an area receiving bright sunlight.
Read More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
More Questions People Also Ask
More About How-Tos
Explore 5 of plant how-tos on Feng shui direction, Water, Lighting, Temperature, Transplant, etc.
Feng shui direction
Southeast
Harmonizing the energies in a space, asian Rice aligns well within Feng Shui rules. Its height and slender stalks symbolize growth and perseverance, vital to any household. When placed facing Southeast, it harnesses wealth luck attributed to that sector, fostering prosperity. Always remember, Feng Shui is not an exact science but a system of balance, which varies among individuals, and asian Rice is no exception.
Water
Lighting
Full sun
Asian Rice thrives under a good amount of solar exposure. Too little sun exposure can lead to stunted growth and susceptibility to diseases. However, excessive sun exposure might lead it to dehydration and scorching. During the growing stage, it needs ample light for photosynthesis and to maximize yield.
Temperature
10 to 35 ℃
Asian Rice is native to environments where the temperature chiefly varies from 68 to 100 °F (20 to 38 ℃). In winter, regulate the temperature closer to its low range to emulate its natural habitat. Adjust upwards in summer.
Transplant
6-8 inches
Consider the warmer embrace of spring (S1) as the ideal time for transplanting asian Rice, when the warming soil allows for optimal root establishment. Transplant asian Rice in a location with full sun and well-drained soil. While transplanting, ensure to handle the roots gently to prevent stress.
Common Pests & Diseases
Common issues for Asian Rice based on 10 million real cases
Leaf tips withering
Low air humidity can cause the edges of the leaves to dry out.
Solutions: If your plant has only a few dried tips, complete the following: Increase humidity. Increase the humidity around your plant by misting it with a spray bottle daily. Alternatively, you can use a humidifier. Water plant. If your soil is dry, water until the soil is moist but not damp. Water again when soil dries out. If a large portion of the leaves is suffering from dry tips, complete the following: Prune away affected tissue. Using sharp and clean pruning shears, remove the dried out tips using clean cuts to avoid harming healthy tissue. Plant tissue will heal on its own, but you can apply a pruning seal for extra protection.
Fruit mold
Fungal infections can cause mold to grow on the surface of the fruit and may also cause decay.
Solutions: There are some relatively easy steps to stop the spread of fruit mold, but swift action must be taken. Prune away infected fruits or flowers. As soon as lesions or fuzz are seen, cut away the infected parts and dispose of them. Do not compost. Apply fungicide to plants with mild infections (those with severe infections may need to be destroyed). Increase airflow. Since spores are mainly wind born, increasing the airflow around your plants will make them less susceptible to infection. Maintain maximum space between plants and open branch structures during the pruning season.
Underwatering
Leaves may wilt for a variety of reasons.
Solutions: The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with. Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock. In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Leaf tips withering
Low air humidity can cause the edges of the leaves to dry out.
Symptom Analysis
The tips and the edges of the plants’ leaves are dried out and brown. They may be crunchy when touched. This is caused by low humidity and/or a lack of water.
Solutions
If your plant has only a few dried tips, complete the following:
- Increase humidity. Increase the humidity around your plant by misting it with a spray bottle daily. Alternatively, you can use a humidifier.
- Water plant. If your soil is dry, water until the soil is moist but not damp. Water again when soil dries out.
If a large portion of the leaves is suffering from dry tips, complete the following:
- Prune away affected tissue. Using sharp and clean pruning shears, remove the dried out tips using clean cuts to avoid harming healthy tissue. Plant tissue will heal on its own, but you can apply a pruning seal for extra protection.
Prevention
Many houseplants come from moist tropical areas with high humidity.
To prevent dry and brown tips, you should complete the following:
- Water regularly. Water when soil is dry.
- Keep humidity high. Keep moisture high by regularly misting the air or using a humidifier.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Fruit mold
Fungal infections can cause mold to grow on the surface of the fruit and may also cause decay.
Overview
Fruit mold is the result of fungal infection by one or more of a wide variety of fungal species. Favoring damp and cool conditions, this problem can have a devastating effect on most fruit crops as it tends to occur just when fruit are reaching maturity. Once mold establishes itself, the fruit quickly decays and becomes inedible. The fungus is capable of spreading quickly to other fruit, either or the same plant or on neighboring plants.
Symptom Analysis
Symptoms tend to be obvious but are quick to develop.
- Brown lesions form on the fruit and occasionally the blossoms. These lesions become soft, mushy, and develop a fuzzy gray or brown coating.
- The infection will very quickly spread to any fruit in contact with those that are infected.
- Fruit may drop or remain on the plant and mummify over time.
- Infection may spread to leaves and new branches, eventually leading to demise of the entire plant .
Disease Cause
This condition is caused by one of a number of fungal species which all follow a similar cycle. Spores remain dormant on dead plant material over the winter months and then emerge during the spring when they are carried by the wind or insect vectors to the host plant. Once they land on a plant, often facilitated by damp conditions, the spores will gain entry and breed (sporulate) rapidly. Entry to the plant is often through damage caused by sap-sucking insects.
Solutions
There are some relatively easy steps to stop the spread of fruit mold, but swift action must be taken.
- Prune away infected fruits or flowers. As soon as lesions or fuzz are seen, cut away the infected parts and dispose of them. Do not compost.
- Apply fungicide to plants with mild infections (those with severe infections may need to be destroyed).
- Increase airflow. Since spores are mainly wind born, increasing the airflow around your plants will make them less susceptible to infection. Maintain maximum space between plants and open branch structures during the pruning season.
Prevention
There are easy, preventative steps the gardener can take to stop mold from attacking fruits and fruit-bearing plants:
- Rake up rotting debris when the growing season is over. Fungi can overwinter on rotting debris and reinfect plants the following season. Clear the ground beneath fruit trees and remove hanging mummified fruit.
- Prune off any infected branches.
- Burn all infected debris.
- Preemptively apply fungicide to susceptible plants, especially in the spring. This can help prevent infections from progressing to a stage where fruits are affected.
- Don't overcrowd when planting. Overcrowding will reduce air circulation, leaving plants wetter for longer and increasing the chance of infection.
- Use drip irrigation instead of overhead irrigation. This will help keep plant surfaces free of moisture, while still ensuring roots are getting enough water. Hose-watering should be performed early in the day, with the spray directed at the base of plants.
- Don't over-fertilize early in the spring. Added nutrients will increase leaf size. As leaves can hold moisture and provide a surface for spores to adhere to, this can increase the chance that mold grows on the plant. Fertilizing later in the season, when fruits are ripening, means additional nutrients will be directed towards those fruits, rather than leaves.
- Insect prevention measures will reduce wounds on plants and decrease access points for fungal spores.
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Underwatering
Leaves may wilt for a variety of reasons.
Overview
Underwatering plants is one of the quickest ways to kill them. This is something that most gardeners are well aware of. Unfortunately, knowing exactly how much water a plant needs can be tricky, especially considering that underwatering and overwatering present similar symptoms in plants.
Therefore, it’s important to be vigilant and attentive to each plants’ individual needs.
Symptom Analysis
As mentioned earlier, overwatering and underwatering present similar symptoms in plants. These symptoms include poor growth, wilted leaves, defoliation, and brown leaf tips or margins. Ultimately, both underwatering and overwatering can lead to the death of a plant.
The easiest way to determine whether a plant has too much water or too little is to look at the leaves. If underwatering is the culprit, the leaves will look brown and crunchy, while if it’s overwatering, they will appear yellow or a pale green in color.
When this issue first begins, there may be no noticeable symptoms at all, particularly in hardy or drought-tolerant plants. However, they will begin to wilt once they start suffering from a lack of water. The edges of the plant’s leaves will become brown or curled. Soil pulling away from the edges of the planter is a telltale sign, or a crispy, brittle stem.
Prolonged underwatering can cause a plant’s growth to become stunted. The leaves might drop and the plant can be more susceptible to pest infestations, too.
Disease Cause
Underwatering is caused by, quite simply, not watering plants often or deeply enough. There is a heightened risk of underwatering if any of these situations apply:
- Extreme heat and dry weather (when growing outdoors)
- Grow lights or indoor lighting that is too bright or intense for the type of plant
- Using fast-draining growing media such as sand
Solutions
The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with.
Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock.
In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Prevention
Always check the soil before watering. If the top inch of soil feels moist, though not wet, the watering is perfect. If it’s dry, water it immediately. If it feels soggy, you avoid watering until it dries out a bit more.
Also, make sure the lighting is sufficient for the species. Plants grow faster and need more water when there is intense light or lots of heat. Being aware of these conditions and modifying them, if possible, is a good way to prevent underwatering. Many container plants are potted in soil mixtures mean to be well-draining. Adding materials that retain moisture, like compost or peat moss, can also prevent these symptoms.
Other tips to prevent underwatering include:
- Choose pots with adequately-sized drainage holes
- Avoid warm temperatures
- Use large pots with additional soil (these take longer to dry out)
- Avoid terracotta pots, which lose water quickly
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Distribution Map
Habitat
Cultivation
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info
Plant Type
Herb
Flower Color
Yellow
White
Green
Bloom Time
Summer, Fall
Symbolism
Protection, Rain, Fertility
Scientific Classification
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Related Plants
Guernsey fleabane
Guernsey fleabane (Erigeron sumatrensis) is a herbaceous tropical annual that will grow from 91 to 183 cm tall. Clusters of cream-colored bell-shaped flowers bloom from winter to summer. Considered a noxious weed in many areas it provides nectar and pollen for bees and other pollinating insects.
Annual ragweed
Annual ragweed (Ambrosia artemisiifolia) is one of the most notorious weeds in the world. It is an annual herbaceous plant with highly allergenic pollen and a very vigorous spread. Annual ragweed is a very competitive species, which is why its presence in cultivated plants is highly undesirable.
Roosevelt weed
Roosevelt weed (Baccharis neglecta) is a shrub also known as the false willow, poverty weed, and New Deal weed. Roosevelt weed is native to Mexico and related to the sunflower.
Ombú
Ombú (Phytolacca dioica) is a deciduous tree that will grow from 12 to 18 m tall. Blooms from summer to fall with small white flowers. Yellow fruits ripen in fall after flowers finish blooming. It is a fast growing tree with soft, spongy wood that makes it a good choice for bonsai growing because the wood is very easy to shape and train.
Swamp mahogany
Swamp mahogany (Eucalyptus robusta) is an evergreen tree that can grow from 20 to 30 m tall. It blooms from spring to summer with creamy white flowers. Native to Australia the broad leaves of the tree are an important food source for the koala bear. Its timber is used for firewood and construction. Commonly found growing in swamps or waterlogged areas it has thick sponge-like bark.
Sweet autumn clematis
Sweet autumn clematis is a flowering vine in the buttercup family. It was first introduced into the United States as an ornamental plant but has since naturalized and even become invasive in some areas. It produces white flowers in the fall.
View More Plants
Related Articles
Useful Tips
Most Common Herb
Plant Collection Most Common Herb Fragrant plantain lily See More The trademark feature of Asia-native plantain lilies is the numerous glossy oval leaves with deep parallel veins. The Fragrant plantain lily is additionally decorated with strongly fragrant, trumpet-shaped, large white flowers, which are unique in the genus. Hosta plantaginea is one of the favorite cultivatedContinue reading “Most Common Herb”
Read More ![more]()
Useful Tips
Best Annual Plant to Grow
Plant Collection Best Annual Plant to Grow Common sunflower See More The Common sunflower is recognizable for its bright flower on a very tall stem. It is often grown in gardens. These flowers have been important in culture: they were worshipped by the ancient Inca people, and today, they represent eco-friendly movements. The artist VincentContinue reading “Best Annual Plant to Grow”
Read More ![more]()
Useful Tips
The Most Important Crops in the World
Plant Collection The Most Important Crops in the World People cannot exist without plants, and some plants would not exist without people. Around the world, large societies thrive on a foundation of agriculture. Read on to learn about the crops that sustain the diversity of cultures across the globe, providing the bounty that ensures humanContinue reading “The Most Important Crops in the World”
Read More ![more]()
Useful Tips
Best Annual Plant to Grow
Plant Collection Best Annual Plant to Grow Common sunflower See More The Common sunflower is recognizable for its bright flower on a very tall stem. It is often grown in gardens. These flowers have been important in culture: they were worshipped by the ancient Inca people, and today, they represent eco-friendly movements. The artist VincentContinue reading “Best Annual Plant to Grow”
Read More ![more]()
Useful Tips
Most Common Herb
Plant Collection Most Common Herb Golden pothos See More The Golden pothos is a popular flowering house plant that’s commonly seen in Australia, Asia, and the West Indies. It goes by many nicknames, including “devil’s ivy,” because it is so hard to kill, and can grow in the dark. Golden pothos has poisonous sap, soContinue reading “Most Common Herb”
Read More ![more]()
View More Articles
Continue reading in our app - it's better
A database of 400,000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
Sign in/sign up
Sign in with Apple
Sign in with Google
Logged in!
About
Care Guide
Care FAQ
More About How-Tos
Pests & Diseases
Distribution
More Info
Related Plants
Related Articles
Add to My Garden Asian Rice
Oryza sativa
Asian Rice is one of the world's most important staple crops. This annual grass, which was first domesticated in China centuries ago, accounts for a significant portion of the diet of half of the world's population. Aside from food, this plant is grown for use in wines, medicines, and cosmetics. It is also used in crafts and religious ceremonies worldwide.
Hardiness Zones
10 to 12
Care Guide for Asian Rice
Soil
Loam, Clay, Sand, Alkaline
Sunlight
Full sun
Hardiness Zones
10 to 12
Planting Time
Early spring, Mid spring
Harvest Time
Late summer
Know the light your plants really get.
Find the best spots for them to optimize their health, simply using your phone.
Download the App
Download
Questions About Asian Rice
Sunlight Temperature How much sunlight should Asian Rice get per day to grow healthily?
What type of sunlight does Asian Rice need?
Should I protect Asian Rice from sun exposure?
What will happen if Asian Rice gets inadequate sunlight?
Does Asian Rice need special care about sunlight during its different growth stages?
Show More ![more]()
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
Download the App
More Questions People Also Ask
More About How-Tos
Common Pests & Diseases
Common issues for Asian Rice based on 10 million real cases
Leaf tips withering
Low air humidity can cause the edges of the leaves to dry out.
Solutions: If your plant has only a few dried tips, complete the following: Increase humidity. Increase the humidity around your plant by misting it with a spray bottle daily. Alternatively, you can use a humidifier. Water plant. If your soil is dry, water until the soil is moist but not damp. Water again when soil dries out. If a large portion of the leaves is suffering from dry tips, complete the following: Prune away affected tissue. Using sharp and clean pruning shears, remove the dried out tips using clean cuts to avoid harming healthy tissue. Plant tissue will heal on its own, but you can apply a pruning seal for extra protection.
Learn More ![more]()
Fruit mold
Fungal infections can cause mold to grow on the surface of the fruit and may also cause decay.
Solutions: There are some relatively easy steps to stop the spread of fruit mold, but swift action must be taken. Prune away infected fruits or flowers. As soon as lesions or fuzz are seen, cut away the infected parts and dispose of them. Do not compost. Apply fungicide to plants with mild infections (those with severe infections may need to be destroyed). Increase airflow. Since spores are mainly wind born, increasing the airflow around your plants will make them less susceptible to infection. Maintain maximum space between plants and open branch structures during the pruning season.
Learn More ![more]()
Underwatering
Leaves may wilt for a variety of reasons.
Solutions: The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with. Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock. In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Learn More ![more]()
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App
Leaf tips withering
Low air humidity can cause the edges of the leaves to dry out.
Symptom Analysis
The tips and the edges of the plants’ leaves are dried out and brown. They may be crunchy when touched. This is caused by low humidity and/or a lack of water.
Solutions
If your plant has only a few dried tips, complete the following:
- Increase humidity. Increase the humidity around your plant by misting it with a spray bottle daily. Alternatively, you can use a humidifier.
- Water plant. If your soil is dry, water until the soil is moist but not damp. Water again when soil dries out.
If a large portion of the leaves is suffering from dry tips, complete the following:
- Prune away affected tissue. Using sharp and clean pruning shears, remove the dried out tips using clean cuts to avoid harming healthy tissue. Plant tissue will heal on its own, but you can apply a pruning seal for extra protection.
Prevention
Many houseplants come from moist tropical areas with high humidity.
To prevent dry and brown tips, you should complete the following:
- Water regularly. Water when soil is dry.
- Keep humidity high. Keep moisture high by regularly misting the air or using a humidifier.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Fruit mold
Fungal infections can cause mold to grow on the surface of the fruit and may also cause decay.
Overview
Fruit mold is the result of fungal infection by one or more of a wide variety of fungal species. Favoring damp and cool conditions, this problem can have a devastating effect on most fruit crops as it tends to occur just when fruit are reaching maturity. Once mold establishes itself, the fruit quickly decays and becomes inedible. The fungus is capable of spreading quickly to other fruit, either or the same plant or on neighboring plants.
Symptom Analysis
Symptoms tend to be obvious but are quick to develop.
- Brown lesions form on the fruit and occasionally the blossoms. These lesions become soft, mushy, and develop a fuzzy gray or brown coating.
- The infection will very quickly spread to any fruit in contact with those that are infected.
- Fruit may drop or remain on the plant and mummify over time.
- Infection may spread to leaves and new branches, eventually leading to demise of the entire plant .
Disease Cause
This condition is caused by one of a number of fungal species which all follow a similar cycle. Spores remain dormant on dead plant material over the winter months and then emerge during the spring when they are carried by the wind or insect vectors to the host plant. Once they land on a plant, often facilitated by damp conditions, the spores will gain entry and breed (sporulate) rapidly. Entry to the plant is often through damage caused by sap-sucking insects.
Solutions
There are some relatively easy steps to stop the spread of fruit mold, but swift action must be taken.
- Prune away infected fruits or flowers. As soon as lesions or fuzz are seen, cut away the infected parts and dispose of them. Do not compost.
- Apply fungicide to plants with mild infections (those with severe infections may need to be destroyed).
- Increase airflow. Since spores are mainly wind born, increasing the airflow around your plants will make them less susceptible to infection. Maintain maximum space between plants and open branch structures during the pruning season.
Prevention
There are easy, preventative steps the gardener can take to stop mold from attacking fruits and fruit-bearing plants:
- Rake up rotting debris when the growing season is over. Fungi can overwinter on rotting debris and reinfect plants the following season. Clear the ground beneath fruit trees and remove hanging mummified fruit.
- Prune off any infected branches.
- Burn all infected debris.
- Preemptively apply fungicide to susceptible plants, especially in the spring. This can help prevent infections from progressing to a stage where fruits are affected.
- Don't overcrowd when planting. Overcrowding will reduce air circulation, leaving plants wetter for longer and increasing the chance of infection.
- Use drip irrigation instead of overhead irrigation. This will help keep plant surfaces free of moisture, while still ensuring roots are getting enough water. Hose-watering should be performed early in the day, with the spray directed at the base of plants.
- Don't over-fertilize early in the spring. Added nutrients will increase leaf size. As leaves can hold moisture and provide a surface for spores to adhere to, this can increase the chance that mold grows on the plant. Fertilizing later in the season, when fruits are ripening, means additional nutrients will be directed towards those fruits, rather than leaves.
- Insect prevention measures will reduce wounds on plants and decrease access points for fungal spores.
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Underwatering
Leaves may wilt for a variety of reasons.
Overview
Underwatering plants is one of the quickest ways to kill them. This is something that most gardeners are well aware of. Unfortunately, knowing exactly how much water a plant needs can be tricky, especially considering that underwatering and overwatering present similar symptoms in plants.
Therefore, it’s important to be vigilant and attentive to each plants’ individual needs.
Symptom Analysis
As mentioned earlier, overwatering and underwatering present similar symptoms in plants. These symptoms include poor growth, wilted leaves, defoliation, and brown leaf tips or margins. Ultimately, both underwatering and overwatering can lead to the death of a plant.
The easiest way to determine whether a plant has too much water or too little is to look at the leaves. If underwatering is the culprit, the leaves will look brown and crunchy, while if it’s overwatering, they will appear yellow or a pale green in color.
When this issue first begins, there may be no noticeable symptoms at all, particularly in hardy or drought-tolerant plants. However, they will begin to wilt once they start suffering from a lack of water. The edges of the plant’s leaves will become brown or curled. Soil pulling away from the edges of the planter is a telltale sign, or a crispy, brittle stem.
Prolonged underwatering can cause a plant’s growth to become stunted. The leaves might drop and the plant can be more susceptible to pest infestations, too.
Disease Cause
Underwatering is caused by, quite simply, not watering plants often or deeply enough. There is a heightened risk of underwatering if any of these situations apply:
- Extreme heat and dry weather (when growing outdoors)
- Grow lights or indoor lighting that is too bright or intense for the type of plant
- Using fast-draining growing media such as sand
Solutions
The easiest (and most obvious) way to address underwatering is to fully hydrate the plant. However, this must be done carefully. A common mistake that many gardeners make is to douse their underwatered plants with water. This can overwhelm the roots of the plant and shock its system, something that can be even more damaging than the lack of water to begin with.
Instead, water thoroughly and slowly, taking breaks to let the water slowly saturate through the soil to get to the roots. Use room temperature water, as cold water might be too much of a shock.
In the future, shorten the time between waterings. A good rule of thumb is to check the soil around each plant daily. If it’s dry to at least two inches down, it’s time to water. If a container plant is repeatedly drying out very quickly, repotting into a slower-draining container might be a good idea, too.
Prevention
Always check the soil before watering. If the top inch of soil feels moist, though not wet, the watering is perfect. If it’s dry, water it immediately. If it feels soggy, you avoid watering until it dries out a bit more.
Also, make sure the lighting is sufficient for the species. Plants grow faster and need more water when there is intense light or lots of heat. Being aware of these conditions and modifying them, if possible, is a good way to prevent underwatering. Many container plants are potted in soil mixtures mean to be well-draining. Adding materials that retain moisture, like compost or peat moss, can also prevent these symptoms.
Other tips to prevent underwatering include:
- Choose pots with adequately-sized drainage holes
- Avoid warm temperatures
- Use large pots with additional soil (these take longer to dry out)
- Avoid terracotta pots, which lose water quickly
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Distribution Map
Habitat
Cultivation
Map
Native
Cultivated
Invasive
Potentially invasive
Exotic
No species reported
More Info
Plant Type
Herb
Flower Color
Yellow
White
Green
Bloom Time
Summer, Fall
Symbolism
Protection, Rain, Fertility
Scientific Classification
Find your perfect green friends.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Download the App
Related Plants
Your Ultimate Guide to Plants
Identify, grow, and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Sign in/sign up
Continue reading in our app - it's better
A database of 400,000+ plants
unlimited guides at your fingertips...
unlimited guides at your fingertips...
Sign in/sign up
Water
Indoor
Indoor
Outdoor potted
In the ground
Choose a site here for personalized care tips. Requirements
Watering Frequency
Smart Seasonal Watering
Install the app for seasonal watering guidance
Download the App
Just like people, each plant has its own preferences and needs. Devote time to understanding your plants so you can nurture them properly. Observe your plants attentively, learning from their growth patterns, and becoming more in tune with their needs as you grow together. Keep a watchful eye on new plants and seedlings, as they are sensitive to both overwatering and underwatering. Shower them with gentle love and attention, fostering their growth and strength. Let the rhythm of your local climate guide your watering habits, adapting your schedule to the changing weather and the needs of your plants. Amount and Approach
Watering from the soil
1. Gradually pour water to the soil from above.
2. Stop watering your plant once water begins to flow out of the drainage holes in the pot.
3. Allow it to rest for 1 minute, then discard any water remaining in the tray, making sure your plant is not sitting in the water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Watering from the bottom
1. Fill the tray with water, ensure that the soil makes contact with the water.
2. Let it rest for 10 minutes.
3. Drain excess water from the tray if the soil is uniformly damp.
4. Watering more to the tray if the soil remains dry.
5. Allow it to sit for an additional 20 minutes before draining any excess water.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. Soaking the water
1. Select a location for soaking your plants, such as a tray or bathtub.
2. Pour a few centimeters of fresh water into the bottom of your chosen container.
3. Soaking your plant pots within the water, allowing them to absorb moisture for 1 hour.
4. Remove the plants from the water and let them dry.
Avoid watering the leaves or flowers. Use a watering can with a long spout when watering to reduce bending and exertion, and ease your fatigue. 
Discover information about plant diseases, toxicity, weed control and more.
Lighting
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Full sun
Ideal
Above 6 hours sunlight
Watch how sunlight gracefully moves through your garden, and choose spots that provide the perfect balance of light and shade for your plants, ensuring their happiness. Essentials
Asian Rice thrives under a good amount of solar exposure. Too little sun exposure can lead to stunted growth and susceptibility to diseases. However, excessive sun exposure might lead it to dehydration and scorching. During the growing stage, it needs ample light for photosynthesis and to maximize yield.
Preferred
Tolerable
Unsuitable
Artificial lighting
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
View more
Indoor plants require adequate lighting for optimal growth. When natural sunlight is insufficient, particularly in winter or in less sunny spaces, artificial lights offer a vital solution, promoting faster, healthier growth.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
1. Choose the right type of artificial light: LED lights are a popular choice for indoor plant lighting because they can be customized to provide the specific wavelengths of light that your plants need.
Full sun plants need 30-50W/sq ft of artificial light, partial sun plants need 20-30W/sq ft, and full shade plants need 10-20W/sq ft.
2. Determine the appropriate distance: Place the light source 12-36 inches above the plant to mimic natural sunlight.
3. Determine the duration: Mimic the length of natural daylight hours for your plant species. most plants need 8-12 hours of light per day.
Important Symptoms
Insufficient light
Asian Rice is commonly grown as an aquatic plant, thriving in open and sunlit environments. However, when placed in indoor settings with insufficient light, subtle symptoms of light deficiency may arise, often going unnoticed.
View more
(Symptom details and solutions)
Small leaves
New leaves may grow smaller in size compared to the previous ones once they have matured.
Leggy or sparse growth
The spaces between leaves or stems of your Asian Rice may become longer, resulting in a thin and stretched-out appearance. This can make the plant look sparse and weak, and it may easily break or lean due to its own weight.
Faster leaf drop
When plants are exposed to low light conditions, they tend to shed older leaves early to conserve resources. Within a limited time, these resources can be utilized to grow new leaves until the plant's energy reserves are depleted.
Slower or no new growth
Asian Rice enters a survival mode when light conditions are poor, which leads to a halt in leaf production. As a result, the plant's growth becomes delayed or stops altogether.
Lighter-colored new leaves
Insufficient sunlight can cause leaves to develop irregular color patterns or appear pale. This indicates a lack of chlorophyll and essential nutrients.
Solutions
1. To ensure optimal growth, gradually move plants to a sunnier location each week, until they receive at least 6 hours of direct sunlight daily. Use a south-facing window and keep curtains open during the day for maximum sunlight exposure and nutrient accumulation.2. To provide additional light for your plant, consider using artificial light if it's large or not easily movable. Keep a desk or ceiling lamp on for at least 8 hours daily, or invest in professional plant grow lights for ample light.
Excessive light
Asian Rice thrives in full sun exposure and can tolerate intense sunlight. With their remarkable resilience, symptoms of sunburn may not be easily visible, as they rarely suffer from it.
View more
(Symptom details and solutions)
Chlorosis
Chlorosis is a condition where the plant's leaves lose their green color and turn yellow. This is due to the breakdown of chlorophyll from excessive sunlight, which negatively affects the plant's ability to photosynthesize.
Sunscald
Sunscald occurs when the plant's leaves or stems are damaged by intense sunlight exposure. It appears as pale, bleached, or necrotic areas on the plant tissue and can reduce the plant's overall health.
Leaf Curling
Leaf curling is a symptom where leaves curl or twist under extreme sunlight conditions. This is a defense mechanism used by the plant to reduce its surface area exposed to sunlight, minimizing water loss and damage.
Wilting
Wilting occurs when a plant loses turgor pressure and its leaves and stems begin to droop. Overexposure to sunlight can cause wilting by increasing the plant's water loss through transpiration, making it difficult for the plant to maintain adequate hydration.
Leaf Scorching
Leaf scorching is a symptom characterized by the appearance of brown, dry, and crispy edges or patches on leaves due to excessive sunlight. This can lead to a reduction in photosynthetic capacity and overall plant health.
Solutions
1. Move your plant to the optimal position where it can receive abundant sunlight but also have some shade. An east-facing window is an ideal choice as the morning sunlight is gentler. This way, your plant can enjoy ample sunlight while reducing the risk of sunburn.2. It is recommended to trim off any completely dehydrated or withered parts of the plant.
Discover information about plant diseases, toxicity, weed control and more.
Temperature
Indoor
Indoor
Outdoor
Choose a site here for personalized care tips. Requirements
Ideal
Tolerable
Unsuitable
Just like people, each plant has its own preferences. Learn about your plants' temperature needs and create a comforting environment for them to flourish. As you care for your plants, your bond with them will deepen. Trust your intuition as you learn about their temperature needs, celebrating the journey you share. Lovingly monitor the temperature around your plants and adjust their environment as needed. A thermometer can be your ally in this heartfelt endeavor. Be patient and gentle with yourself as you explore your plants' temperature needs. Cherish your successes, learn from challenges, and nurture your garden with love, creating a haven that reflects the warmth of your care. Essentials
Asian Rice is native to environments where the temperature chiefly varies from 68 to 100 °F (20 to 38 ℃). In winter, regulate the temperature closer to its low range to emulate its natural habitat. Adjust upwards in summer.
Regional wintering strategies
Asian Rice is extremely heat-loving, and any cold temperatures can cause harm to it. In the autumn, it is recommended to bring outdoor-grown Asian Rice indoors and place it near a bright window, but it should be kept at a certain distance from heaters. Maintaining temperatures above {Suitable_growth_temperature_min} during winter is beneficial for plant growth. Any temperatures approaching {Tolerable_growing_temperature_min} are detrimental to the plant.
Important Symptoms
Low Temperature
Asian Rice prefers warm temperatures and is not tolerant of low temperatures. It thrives best when the temperature is above {Suitable_growth_temperature_min}. During winter, it should be kept above {Tolerable_growing_temperature_min}. When the temperature falls below {Limit_growth_temperature}, the leaves may lighten in color. After frost damage, the color gradually turns brown or black, and symptoms such as wilting and drooping may occur.
Solutions
Trim off the frost-damaged parts. Immediately move indoors to a warm environment for cold protection. Choose a spot near a south-facing window to place the plant, ensuring ample sunlight. Additionally, avoid placing the plant near heaters or air conditioning vents to prevent excessive dryness in the air.
High Temperature
During summer, Asian Rice should be kept below {Suitable_growth_temperature_max}. When the temperature exceeds {Tolerable_growing_temperature_max}, the color of the leaves becomes lighter, and the plant becomes more susceptible to sunburn.
Solutions
Trim away the sunburned and dried-up parts. Move the plant to a location that provides shade from the midday and afternoon sun. Water the plant in the morning and evening to keep the soil moist.
Discover information about plant diseases, toxicity, weed control and more.
Transplant
How to Successfully Transplant Asian Rice?
Consider the warmer embrace of spring (S1) as the ideal time for transplanting asian Rice, when the warming soil allows for optimal root establishment. Transplant asian Rice in a location with full sun and well-drained soil. While transplanting, ensure to handle the roots gently to prevent stress.
What Preparations are Needed Before Transplanting Asian Rice?
What is the Ideal Time for Transplanting Asian Rice?
Ideally, you should transplant asian Rice during the onset of the wet season, where rain is reliable (let's refer to it as '/S1/'). This time is apt because it provides asian Rice with the right amount of water it requires for optimum growth. As it helps to establish a better root system and promotes vigorous growth, you'll benefit from a full and abundant harvest. Let's ensure we handle asian Rice transplants gently to avoid root damage during '/S1/'. Remember, transplanting asian Rice at this time is nature's way of ensuring the lifecycle of asian Rice is undisturbed. Try it, asian Rice would thank you for it!
How Much Space Should You Leave Between Asian Rice Plants?
When transplanting your asian Rice, it's important to give them room to grow. Space each plant about 6-8 inches (15-20 cm) apart. This allows proper air circulation and encourages healthy growth.
What is the Best Soil Mix for Asian Rice Transplanting?
Your asian Rice prefers loamy or clay soil, rich in organic matter. Before transplanting, mix organic compost or a balanced base fertilizer into the soil to ensure a nutritious start for your plant.
Where Should You Relocate Your Asian Rice?
For the best results, choose a sunny location for your asian Rice. They need at least 6 hours of direct sunlight daily. Remember to avoid overly shaded areas when choosing your transplanting location.
What Equipments Should You Prepare Before Transplantation Asian Rice?
Gardening Gloves
To protect your hands while working with the space and asian Rice plant.
Spade or Shovel
These will be used for digging the hole in your garden where the asian Rice will be transplanted.
Watering Can
This will be needed to ensure proper hydration before and after the transplanting process.
Wheelbarrow or Container
Useful for moving the asian Rice plant from its original location to the new location.
Measuring Tape
To pre-define the width and depth of the hole.
Seedling Tray (Optional)
Some gardeners find it beneficial to use a seedling tray for starting their asian Rice seeds.
How Do You Remove Asian Rice from the Soil?
Choose a suitable place in your garden where the asian Rice will have enough room to grow without interference from other plants, free from the risk of being trampled.
Measure the planting area taking into account the size of the asian Rice root ball plus some additional space for roots to comfortably spread out. Then dig a hole of about twice the width and the same depth of the root ball.
The plant should be prepared by carefully teasing out the roots from the bottom and sides of the root ball, removing any twisted or circling roots.
Place the asian Rice in the centre of hole. Backfill the hole, firming it slightly to ensure the plant stand on its own.
Water the asian Rice plant immediately after transplanting to help it settle in the soil.
Step-by-Step Guide for Transplanting Asian Rice
Step1 Identify Location
Choose a suitable place in your garden where the asian Rice will have enough room to grow without interference from other plants, free from the risk of being trampled.
Step2 Size and Dig Hole
Measure the planting area taking into account the size of the asian Rice root ball plus some additional space for roots to comfortably spread out. Then dig a hole of about twice the width and the same depth of the root ball.
Step3 Prepare the asian Rice plant
The plant should be prepared by carefully teasing out the roots from the bottom and sides of the root ball, removing any twisted or circling roots.
Step4 Transplant
Place the asian Rice in the centre of hole. Backfill the hole, firming it slightly to ensure the plant stand on its own.
Step5 Establish
Water the asian Rice plant immediately after transplanting to help it settle in the soil.
How Do You Care For Asian Rice After Transplanting?
Regular Check-ups
After the transplanting process, it is best to keep a keen eye on the asian Rice plant for the first few weeks, watching out for signs of transplant shock which can include leaf drop or changes in leaf colour.
Watering
Water deeply after transplanting. Then continue to water regularly, but avoid overwatering as this can lead to root rot.
Pruning
Do not prune immediately after transplanting as the asian Rice plant needs all its leaves to produce food. If necessary, pruning can be done once the plant has fully recovered and resumed growth.
Protecting
If transplanting was done in a season of high temperature, the asian Rice plant needs to be protected from the midday sun for the first week or two.
Troubleshooting Common Issues with Asian Rice Transplantation.
When should I transplant asian Rice?
The best period to transplant asian Rice is during S1. It enhances the plant's chance to adapt and grow successfully.
How much spacing is required when transplanting asian Rice?
Space your asian Rice around 6-8 inches (15-20 cm) apart. Adequate spacing promotes proper growth and airflow which reduces the potential for disease.
What to do if the asian Rice appears to wilt after transplanting?
Transplantation can be stressful for asian Rice. Ensure sufficient watering, but not to the point of waterlogging. Regular yet moderate watering promotes recovery.
Why are my transplanted asian Rice turning yellow?
Yellowing leaves could be due to overwatering, nutritional deficiency, or disease. Check the soil moisture and consider a balanced fertilizer.
How can I ensure the roots of asian Rice take properly after transplanting?
Gently tease the roots before planting and ensure the root ball is completely covered with soil. Keep the soil moist but not waterlogged.
Some of my asian Rice died shortly after transplanting. Why?
Sudden plant death could be due to transplant shock, improper planting depth, or pests. Inspect your plant and its conditions to determine the possible cause.
What's the best soil for transplanting asian Rice?
Asian Rice prefers a well-drained, fertile soil with a pH value of 6.5-7.0. Organic matter can be added to enrich the nutrient content.
My asian Rice growth seems stunted after transplanting, why?
Factors like inadequate spacing, lack of nutrients, and insufficient watering could contribute to stunted growth. Reflect on these aspects and adjust your care routine.
Can I transplant asian Rice in containers?
Yes, asian Rice can be grown in containers. However, select a deep container to accommodate its root system and allow a 6-8 inches (15-20 cm) spacing.
Why are the leaves of my asian Rice curled after transplanting?
Curling leaves might indicate pest infestation or water stress. Check for insects and ensure proper watering. Pesticides might be needed if pests are detected.
Discover information about plant diseases, toxicity, weed control and more.
1 / 5
