You might want to put a garden hose at the plant base to ensure that you're promoting excellent root development. Avoid directly spraying the leaves, and know that the leaves will require more watering if they are outdoors and facing direct sunlight. You can also use bubblers that you can put on to each plant to moisten the roots. Also, use soaker hoses that can cover the entire garden or bed when adding or removing plants to push the roots deeply. Drain any excess water and wait for the soil to dry before watering. Water at ground level to prevent diseases. On a sunny day, you might want to spray the entire bush with water. Whether potted or in-ground, please remember Devil's backbone prefers deep watering over light sprinkling.

An overwatered Devil's backbone can start to have leaves that turn yellow, drop off and wilt. The plant can also look dull and unhealthy, with signs of mushy stems. When they are beginning to show these signs, it's best to adjust your schedule whenever possible. The wilting can also be a sign of under watering as well. You might see that the leaves begin to turn crispy and dry while the overwatered ones will have soft wilted leaves. Check the soil when it is dry and watering is not enough, give it a full watering in time. Enough water will make the Devil's backbone recover again, but the plant will still appear dry and yellow leaves after a few days due to the damaged root system. Once it return to normal, the leave yellowing will stop . Always check the moisture levels at the pot when you have the Devil's backbone indoors. Avoid overwatering indoors and see if there are signs of black spots. If these are present, let the soil dry in the pot by giving it a few days of rest from watering. Overwatering can lead to root rot being present in your plant. If this is the case, you might want to transfer them into a different pot, especially if you see discolored and slimy roots. Always prevent root rot as much as possible, and don't let the soil become too soggy. You should dig a little deeper when you plant your Devil's backbone outdoors. When you check with your fingers and notice that the soil is too dry, it could mean underwatering. Adequate watering is required to help the plant recover.

The Devil's backbone likes deep and infrequent watering. You would want to soak them in a gallon of water each time, especially when they are planted in pots. The water storage of flower pots is limited and the soil will dry out faster. Watering is required every 3 to 5 days when living in a cold region. Water it early in the morning when the soil is dry, outdoors or indoors. You can also determine if watering is needed by checking the soil inside. When the top 2-3 inches of soil is dry, it is time to give the plant a full watering. During hot days, you may need to check the moisture daily, as the heat can quickly dry out the soil in the pot. Irrigation of the soil is also required if you have a garden. When you live in a hot climate, you might want to water once a week. Only water when you notice that about 2 to 3 inches of soil become too dry outdoors or indoors. Consider the amount of rainwater on the plant and ensure not to add to it to prevent root rot.You may not need additional watering of the plants if there is a lot of rainfall.Devil's backbone generally grows during spring and fall. When they are outdoors, you need to add mulch about 3 to 4 inches deep to conserve more water. You need to water the plants more frequently in sandy soil because this type tends to drain faster. However, with the clay one, you need to water this less frequently where you could go for 2-3 days to dry the plant and not develop any root rot. You could mark the date on the calendar whenever you water and when you notice that the leaves are starting to droop. This can mean that you might be a day late.

The Devil's backbone generally needs about a gallon of water each schedule,With the potted plants, you might want to water them deeply until you see that the water is dripping at the bottom of the pot. Then, wait for the soil to dry before watering them again. You can use a water calculator or a moisture meter to determine the amount you've given to your plant in a week. Provide plenty of water, especially in the flowering period, but let the moisture evaporate afterwards to prevent root rot. If Devil's backbone is planted outdoor with adequate rainfall, it may not need additional watering. When Devil's backbone is young or newly planted, make sure it gets 1-2 inches of rain per week. As Devil's backbone continues to grow, it can survive entirely on rainfall. Only when the weather is too hot, or when there is no rainfall at all for 2-3 weeks, then consider giving Devil's backbone a full watering during the cooler moment of the day to prevent the plant from suffering from high heat damage. Additional watering will be required during persistent dry spells.

The Devil's backbone needs outdoors come from rain, with only persistent dry weather requiring watering. Throughout the spring and fall growing seasons, the soil needs to be kept moist but not soggy, and alternating dry and moist soil conditions will allow the Devil's backbone to grow well. Throughout the summer, hot weather can cause water to evaporate too quickly, and if there is a lack of rainfall, you will need to water more frequently and extra to keep it moist. Usually, the Devil's backbone will need less water during the winter. Since the Devil's backbone will drop their leaves and go dormant, you can put them into a well-draining but moisture-retentive soil mixture like the terracotta to help the water evaporate quicker. Once your Devil's backbone growing outdoors begins to leaf out and go dormant, you can skip watering altogether and in most cases Devil's backbone can rely on the fall and winter rains to survive the entire dormant period. After the spring, you can cultivate your Devil's backbone and encourage it to grow and bloom when the temperature becomes warmer.This plant is not generally a fan of ponding or drought when flowering. You must ensure that the drainage is good at all times, especially during the winter. When the plant is in a pot, the plant has limited root growth. Keep them well-watered, especially if they are planted in pots during summer. They don't like cold and wet roots, so provide adequate drainage, especially if they are still growing. It's always best to water your Devil's backbone’s diligently. Get the entire root system into a deep soak at least once or twice a week, depending on the weather. It's best to avoid shallow sprinkles that reach the leaves since they generally encourage the growth of fungi and don't reach deep into the roots. Don't allow the Devil's backbone’s to dry out completely in the fall or winter, even if they are already dormancy. Don't drown the plants because they generally don't like sitting in water for too long. They can die during winter if the soil does not drain well. Also, apply mulch whenever possible to reduce stress, conserve water, and encourage healthy blooms.

If planting in the ground, Devil's backbone mostly relies on rain. However, if there is no rainfall for 2-3 weeks, you may need to give proper consideration to giving the plants a deep watering. If watering Devil's backbone in summer, you should try to do it in the morning. A large temperature difference between the water temperature and the root system can stress the roots. You need to avoid watering the bushes when it's too hot outside. Start mulching them during the spring when the ground is not too cold. The age of the plants matter. Lack of water is one of the most common reasons the newly planted ones fail to grow. After they are established, you need to ease off the watering schedule. Reduce watering them during the fall and winter, especially if they have a water-retaining material in the soil. The dry winds in winter can dry them out, and the newly planted ones can be at risk of drought during windy winter, summer, and fall. Windy seasons mean that there's more watering required. The ones planted in the pot tend to dry out faster, so they need more watering. Once you see that they bloom less, the leaves begin to dry up. Potted plants are relatively complex to water and fluctuate in frequency. Always be careful that the pot-planted plant don't sit in the water. Avoid putting them in containers with saucers, bowls, and trays. Too much watering in the fall can make the foliage look mottled or yellowish. It's always a good idea to prevent overwatering them regardless of the current climate or season that you might have. During the months when Devil's backbone begins to flower, you might want to increase the watering frequency but give it a rest once they are fully grown. Give them an adequate amount of water once every 3 to 5 days but don't give them regular schedules. Make sure the soil is dry by sticking your finger in the pot, or use a moisture meter if you're unsure if it's the right time. Too much root rot can cause them to die, so be careful not to overwater or underwater regardless of the climate or season you have in your area.

Watering the Devil's backbone helps transport the needed nutrients from the soil to the rest of the plant. The moisture will keep this species healthy if you know how much water to give. The watering requirements will depend on the weather in your area and the plant's soil. The Devil's backbone thrives on moist soil, but they can't generally tolerate waterlogging. Ensure to provide enough mulch when planted on the ground and never fall into the trap of watering too little. They enjoy a full can of watering where the water should be moist at the base when they are planted in a pot to get the best blooms. If they are grown as foliage, you need to water them up to a depth of 10 to 20 inches so they will continue to grow. If it's raining, refrain from watering and let them get the nutrients they need from the rainwater.

For healthy growth, make sure that Devil's backbone receives at least 3–6 hours of sun each day. This is actually a minimum requirement—most plants that can handle part sun can also thrive in full sun, but because they require less light for photosynthesis, they are more flexible than plants that require full sun or part shade.

Devil's backbone does best with exposure to full or part sun. They will perform best with direct morning light, but in summer they need protection from the strong afternoon sun. In temperate environments, too much hot afternoon sun can burn the leaves, damaging the plant's appearance and health.

Devil's backbone planted indoors can easily be damaged by direct sunlight when it's moved outdoors. The best way to prevent sunburns from overexposure is to move pots gradually from a shaded area to a brighter spot, gradually. But even plants that are acclimated to the summer sun can be damaged by extreme heat. In a heatwave, it is important to keep the soil consistently moist so that plants can cope with excessive levels of heat. Moving plants in containers to areas with afternoon shade or erecting a shade cloth over them can protect sensitive Devil's backbone during extreme weather events.

While bright morning sun and some full sun exposure can be highly beneficial for Devil's backbone, the harsh, hot midday sun of summer can be too much to handle. If planted in the ground, the summer sun will usually ramp up slowly enough through the season for Devil's backbone to gradually adapt to its intensity. But a potted plant that has been indoors or in a protected location will often suffer injury when placed suddenly into a location where the direct summer sun reaches it in the hottest part of the day. To protect this plant from the brutal afternoon summer sun, plant or place it in an understory location where it is shaded at midday by taller trees and plants or by a building or landscape feature.

When Devil's backbone receives too little sun, they may become pale green or display drooping, yellow leaves. While some leaf drop is normal, if leaves are dropping but no new ones are growing in to replace them, it is a sign that something is wrong. If Devil's backbone receiving inadequate light does manage to grow, the new growth is often spindly, pale, and prone to insect infestation. Paying attention to these signs and changing the lighting conditions of the plant will make a significant difference.

Tender, new leaves are especially sensitive to sunburn. Bearing this in mind, very young Devil's backbone and when it's in a strong growth phase, such as in late spring and early summer, will be more sensitive to harsh sun and heat than the mature one or those in a more dormant fall growth stage. Devil's backbone fresh from a nursery is also usually not prepared for strong full sunlight and must be introduced to it slowly.

Recently transplanted Devil's backbone will often experience a bit of shock and will need to be cared for carefully, either shaded from bright afternoon sun or placed in a protected area. On very hot days, you may see the leaves of Devil's backbone drooping—this is usually nothing to worry about. Plants will send the water in their leaves down into their roots to protect them from burning. However, if the leaves are still drooping in the evening or the next morning, the plant needs water. Always avoid watering during the hottest times of day, as sunlight can hit wet leaves and scorch them easily. Devil's backbone that has been underwatered will be weaker than that with consistently moist soil. This can leave it with weak roots that are unable to protect the leaves on hot, sunny summer days by diverting water away from the leaves. Care for an underwatered plant by giving it a long, deep watering and then allowing the top two inches of soil to dry out before the next watering. Even if it loses its leaves, if cared for properly it will grow new ones.